hallo
i have download RUU16007ger_t-mobile_de from t_mobile site.
now i start update but connection broken up.
i started update again but no connection with pc active sync and mda.
on mda display shows all times usb v1.01.
i read in forum many posts but i understand not all.
i`m new mda user pls help me.
thx
best regards
alex
Related
Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
:lol: not buy serial cable!!!
there is an OFFICIAL UPGRADE ready and existing, but not yet PUBLIC,
it is one nice 40 MB RUU file which will uprgade your unit to english language:
Microsoft Pocket PC version 4.20.0 (Build 13252)
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
Indirizzo http://xda-developers.com/incoming/rom160wwe/RUU16006WWE_T-mobile_NL.exe
IT'S FANTASTIC AND EASY WHIT THE USB CRADDLE
What you may try to do, for a start, is to reinstall the ROM upgrade once again, USING THE USB CRADLE and nothing else. Better remove the SIM card before installing the upgrade. Also, make sure that the battery is fully charged. All through the upgrade process, do not touch the device.
Finally....
Next day When i was in my job put my imate in the cradle, ran the upgrade and it worked.....I am happpppppy ¡¡¡¡
Upgrade failed
I had the same problem as dherrero. However, I have no luck as him. My XDA II still dead can not be boot. Anyone can help? Thanks.
IT's DEAD
I have a MDA from T-Mobile for 3 weeks now. I find out about the rom update (RUU16006WWE_T-mobile_NL.exe), tried it and got the message that the update failed.
On my MDA screen therse is only the message "USB v1.01".
Running the update again doesn't help.
Is there a solution or do I have to contact T-Mobile?
Hi all ,
One of my Friends had the same problem , he tried another computer and it works , then guess what was the problem ???? We found that it was ZONE ALARM !!!
So please check You'r computers guyes ,it might be another software makes the upgrade failed .
Thanks
Hi all!
We have to be aware, that the upgrade program says "NO PROGRAMS RUNNING ON THE PPC AND NO PROGRAMS RUNNING ON THE PC ITSELF"
It's a hard lesson i learned years ago while flashing a BIOS..... if possible, do it at an UPS equipped PC (or notebook btw) to reduce your chances of killing your device.
Windows XP has many more programs running than one would suspect. As a first measure, kill all the ones you can in the right side of your taskbar, shut down your Anti Virus and Firewall, and cross your fingers while upgrading.....
Should we also shut down Activesync? Or is it needed for the upgrade?
Thanx.
I am in the same boat this day. Please help !!! I tried to upgrade the imate threw the club imate ... i downloaded ok i believe ... i did not use the cradel just a mini sync usb cord ... i used this before many times to sync... but when i tried to run the official update it stopped and now it says only serial v1.02 when i put it in the cradel it says usb v1.o2 its dead... no light for batter scharge nothing???? no sync at all please help
ActiveSync is not involved in the upgrade process. The upgrade program runs out of this, with it's own connection and settings via USB.
I haven't used the mini cord, so I'm of no help about it.
Try the upgrade program again, looks like it failed to fully flash your ROM. (That's why you don't see the charging light, it's Software controlled)
Good Luck!
mm
Try to update your imate using a cradle connected to a pc(usb). It should work
i have the exact same problem as highlighted by the others here, USB and v1.02 screen. Question is, how do you continue to flash your rom after it fails and you put back your unit into the cradle and activesync does not sync it anymore
the upgrade doesnt use activesync so it doesnt matter. Just put the imate in the cradle(in other pc, if possible) and run the upgrade
qtek rom update problem
hi guys. my qtek only says USB v 1.02. I cannot do any rom flash. what rom should i use. where can i download it from?
Hai,
I'm calling for your help because i wanted to upgrade my mda2 with this file: ruu172126wwe_imate.exe
that i just downloaded from this site....
but i got an error and on my screen I can only see the tect Serial v1. 03 and when i put it on my cradle it sais USB v1.03
What can I do..
Please help me :roll:
Hi,
I'm no expert, but I have upgraded my MDA2 sucsessfully. Have you tried to upgrade it when docked in that state?
Or maybe you will have to upgrade using other methods, like through SD card or serial/usb... Please research on this forums for further details.
One thing that I can almost assure you, your MDA2 is not dead! if you see the Serial/USB interface or bootloader then you have a chance to revive it... :wink:
Good luck...
Rayan
I was doing rom upgrade my MDA for WM2005 but during the rom upgrade my MDA's usb cable was plug out and connection lost. Now my MDA don't open and don't connect with computer because I start rom upgrade program (Hima Upgrade UT) it wrote ERROR101:CONNECTION ERROR . I did hard reset several times but didn't change anything.Please help me how will I solve this problem
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
Hello friends,
I have a problem concerning the upgrade of my ROM on a MDA II with Mobile 5. When I connect the MDA (is shown as connected in Mobile Device Center) and start the "start_uspl.exe" everything is working fine. But in the next steps, when the ROM should be installed I always get the following issue:
ERROR [260]: Update Error --> But everything is plugged in correctly?
Can you send me a link to a ROM for the MDA II, so that I can install it all correctly without any failures?
Thank you for your support.
Best Regards,
Pepsi the only way I like it.;-)
MDA II >>IS NOT<< Charmer. Try MDA II section of forums.
BTW, talking about Mobile Device Center - read about Vista specific flashing, it's not the same as in XP!!! XP procedures will always fail...