see the picture attached!
i just follow the method from the site
http://bbs.pdafans.com/viewthread.php?tid=42614
just finished by last night,and i set it to one key rotate screen using the software phm key,so cool~
Any chance of translating this to English? :wink:
@ricky0930
i just follow the method from the site
http://bbs.pdafans.com/viewthread.php?tid=42614
just finished by last night,and i set it to one key rotate screen using the software phm key,so cool
Click to expand...
Click to collapse
Hi ricky0930,
That thread is no more accessible... ( looks like it was deleted.
However, I downloaded .bin ROM image from another site.
Did you get (at upgrading) an error message "Update NOT allow" ??
What was your bootloader version before upgrade?
THANX
buzz
where can i download it from?
http://www.kenofalte.com/69602Ver.BIN
Click to expand...
Click to collapse
120.13 MB
http://www.kenofalte.com/69602Ver.BIN 120.13 MB
Step for upgrade
Hi ricky0930,
Could you please post all steps for upgrade?
Cheers
must do some cut n paste work before update
and the result is a totally chinese ppc even the model no change to ph10b,
since i'm at china and using chinese,i can handle all this,but if u guy want to do this, i'll post the process step by step later.
I want English Version. Somebody please!!!!!!!!!!!
Steps for upgrade:
1. make SD ROM backup of your XDAII
2. using Winhex, save the content to PC
3. using Winhex, copy the first 412 bytes from the header of your backup file
4. using Winhex, paste them over first 412 bytes of the chinese ROM backup binary file and save it
5. using Winhex, write chinese ROM backup file onto your SD card
6. put the SD card in XDAII and enter bootloader mode (wait a bit)...
7. press "Power" to flash...
That's it. At the end of flashing, it will complain, that "checksum failed", but just reset and....
...I have WM2003 SE running on my XDAII!
I'm not saying too much details on how to do this and that, because if you are NOT an EXPERIENCED USER of winhex, XDAII bootloader, YOU HAVE NO KNOWLEDGE, HOW TO FLASH XDAII, THEN:
!!!!!!! D.O.N.T. D.O. T.H.I.S. !!!!!!!
If you do, it's your own risk...
buzz
I want English Version. Somebody please!!!!!!!!!!!
NON-SD image
Does anyone have access to the non-SD image of this ROM? I mean the official desktop .exe that flashes the device?
I have upgraded to 2003SE, very happy to use it, ha ha ... ...
byron,
can you explain more clearly how you can upgrade the rom? Is this a simplified or traditional Chinese rom?
Await for your reply
Chi Fai
simplified Rom
but not as the normal .exe upgrade from O2, you need
a special way to do it
Anonymous said:
byron,
can you explain more clearly how you can upgrade the rom? Is this a simplified or traditional Chinese rom?
Await for your reply
Chi Fai
Click to expand...
Click to collapse
hi, Chi Fai, here it is:
1. Backup ur ROM. Insert above 128MB SD, uncheck "USB connection" in ActiveSync. Using "romupdate.exe", select "\\.\WCEUSBSH001". type "d2s".
2. Using "ntrw" "read" ur ROM into PC.
3. Using winhex, replace the 0-383 byte of "69602Ver.BIN" w/ ur ROM's. May be 0-411 byte, if ur xda2 is V1.06. Mine is V1.01.
4. Using "ntrw.exe" to write ROM(2003SE) to SD.
5. Insert the SD to ur xda2, enter bootloader mode, press "Power" to flash... then reset.
5. "69602Ver.BIN" is a simplified Chinese ROM.
6. BTW, U can still get recovery by uring ur ROM SD in bootloader mode.
7. Mention above posted: "if you are NOT an EXPERIENCED USER of winhex, XDA II bootloader, YOU HAVE NO KNOWLEDGE, HOW TO FLASH XDA II, THEN: !!!!!!! D.O.N.T. D.O. T.H.I.S. !!!!!!! If you do, it's your own risk... "
Good luck! BTW, I flash mine w/ abt 20 min... will upgrade the radio to 1.18... ...
how about the radio ? and ext rom ?
Using winhex, replace the 0-383 byte of "69602Ver.BIN" w/ ur ROM's. May be 0-411 byte
I saw in few forums there is 3 number to replace
0-383
0-3xx
0-411
how do we know which one is which one
there is 2 more number also
0-368
0-399
You have to replace the complete ROM image header (highlited in blue) up to HTCS checksum.
It depends on your bootloader version and device...
buzz
Related
Can we use XDATools to backup and restore XDA II ROM? Or XDA II provide a way to do the ROM backup and restore?
vbexpert said:
Can we use XDATools to backup and restore XDA II ROM? Or XDA II provide a way to do the ROM backup and restore?
Click to expand...
Click to collapse
is there a way to enter Bootloader method for XDA II?
You can enter bootloader on xda ii via power+any direction button+reset. Word of warning, it will hard reset as well.
palmop said:
You can enter bootloader on xda ii via power+any direction button+reset. Word of warning, it will hard reset as well.
Click to expand...
Click to collapse
Does it have the option to backup and restore ROM? Thanks!
it has d2s command to dump rom to sd, but don't know the reverse...
s2d like on an ipaq ?
is that a raw command on terminal software?
maybe its the same on ipaq?
lets find out
didnt get the terminal software to work though
dunno witch
found this
Here's how:
1. First insert the formatted SD card to the healthy iPAQ. Connect the cradle/cable to your computer's serial port. Install the A/C adaptor to your cradle.
2. Prepare the healthy 39xx to enter DEBUG mode:
- press and hold button: power, contacts, and inbox, and do pin reset.
- if your iPAQ shown all-red COMPAQ display, with 'SERIAL' text above, then you're in the debug mode.
- sit the debugged iPAQ to the cradle.
2. Open hyper-terminal, make a new connection, using these setting:
- the COM port where the iPAQ is connected.
- 115,200 bps
- 8 databits
- no parity
- 1 stop bit
- NONE handshaking.
- Connect!
3. Once connected, hit once to show the prompt SER>
4. On prompt SER> type "?" for displaying all the commands avail.
5. On this process of ressurection, we'll gonna use only two command: "d2s" (device to storage) and "s2d" (storage to device).
6. type "d2s" and hit .
7. The ROM copying process will begun, and you'll see a 'progress bar'. This may take apprx. 10 minutes.
8. When it's finished, you'll see the confirmation on both of your hyper-terminal screen and your iPAQ.
9. Disconnect the hyper terminal session.
Now the resurrection steps:
1. Prepare your dead 39xx to debug mode.
2. insert the SD card (which is now already filled with the 39xx ROM)
3. start a session on your hyperterminal again (using the same setting as above).
4. once connected, hit once to shown the SER> prompt.
5. type "s2d"
6. Your iPAQ will display a warning that current ROM will be erased, press 'power' button to confirm.
7. Starting the process of erasing the ROM of your dead iPAQ. This will take apprx. 7-9minutes.
8. Once the erasing process is done, it will automatically re-write the ROM of your dead iPAQ with the NEW ROM from the healthy iPAQ. This process took much longer, apprx 15 minutes.
9. When the copying process' done, both of your iPAQ and hyperterminal will shown an OK confirmation.
10. Disconnect the hyperterminal session.
11. Unplug your iPAQ from its cradle, do a soft reset.
12. Your dead iPAQ's risen!
gonne TRY !!!!
ITS WORKING
downloading rom now from my phone for backup
ftp://ftp.hilgraeve.com/htpe/htpe63.exe
for direct terminal software download
** rom is now on my card.
but how to replace the rom with an english one.
you cant read the card anymore
There has to be a way to dump that SD to a file. For me I can go to my friend's house and dump his English ROM and put it on my MDA II, but for many others, they'll need a file. Let's focus on how to do this.
I got MDA II from germany couple of days ago, and have been stuck with the German language. I've been searching and seaching for English ROM for couple of days and still no luck.
Can someone PLEASE please please make an image of the English ROM of their XDA 2 and post it here.
Thanks in advance
I will post it, as soon as I can get my hands on it
we just need to find another xda2 with english rom
and then dump that one
and use the rom for you own
I need the German XDA II ROM (because I have a MDA II, but I have an O2 card).
Can anyone dump a German XDA II ROM please!?!
how do i make a backup/image of the ROM? please give me step by step instructions. Thanks.
Backup & Restore of ROM MDAII
Hi all,
to backup your ROM:
1) put your device in bootloader mode
2) connect via cradle
3) use any terminal (minicom) to connect to the used port (/dev/ttyUSB0)
- you should see something like 'USB>' or 'SER>'
4) put an SD Card into device
5) type d2s on command prompt
to restore your ROM:
1) put your SD-Card into device
2) put your device in bootloader mode
3) the device will ask you to press power to flash the rom
and how do we change the rom on that SD?
We cant read the files
its formated in a non standard way
How to backup the Radio Stack of MDAII??
are there any possibilities to backup and restore the radio stack using the bootloader method?
thanks a lot,
bio
akira Posted: Sun Nov 16, 2003 18:48 Post subject:
--------------------------------------------------------------------------------
and how do we change the rom on that SD?
We cant read the files
its formated in a non standard way
Click to expand...
Click to collapse
Did you tried with WinHex software?
It is not formatted in FAT/FAT32/NTFS, etc. Thus WinHex can't read it...
I have the T-Mobile ROM 1.60 currently installed on my I-Mate. Now I am trying to install the latest I-Mate update, I keep getting Country ID Error 120. Anyone know a solution? It seems we need some kind of AdaptROM...
The same for me yesterday ERROR 120, I try anyway but no results
I think that new ROM only for I- mate Device with special IMEI Number :evil:
Any ideas? :?:
I upgrade to i-mate update and I try to upgrade to T-Mobile I get the same error!!
anyone can help?
try to hard way...
unzip the ruu15283wwe_cdl.exe file,
you'll find there the *.nbf files.
Use the files to flash with SD card.
I'm not sure if this also works with the XDA II, but try XDATools:
http://www.xda-developers.com/XDAtools/
tomerbn said:
try to hard way...
unzip the ruu15283wwe_cdl.exe file,
you'll find there the *.nbf files.
Use the files to flash with SD card.
I'm not sure if this also works with the XDA II, but try XDATools:
http://www.xda-developers.com/XDAtools/
Click to expand...
Click to collapse
It seems not possible by writing just writing the nbf to SD card and flash to the XDA 2 anymore.
Because the bootloader will check the first 412 bytes (i believe it is the code on the last line of the 412 bytes, somthing like HTCSA00400000XXXXXXXX.............) of the rom on the SD card match with your machine or not. Therefore without any modification, only the ROM dump from the Machine itself can be flashed.
Moreover, nbf is encoded, you can't just edit it by HEX editor, you have to get the rom in nb1 format.
I think XDA developers have to develop new tools to
1. Get the first 412 byte of the rom from your machine in an easier way. Now we have to use Multiport / USB TTY get into bootloader console, dump the rom to SD card , and use ntrw read the SD Raw data to the computer to get this 412 byte. You need a HEX Editor to do so. (Please correct me if I said something wrong).
We can
a) develop an APP to get the 412bytes from SD to harddisk without using a HEX editor
b) directly read this 412 bytes from the XDA2 if possible.
2. A Rom tools that can add your machine's own first 412bytes (or the code) , combine it with a .nb1 or .nbf and write it to a SD card.
By the way , I think a new adoptrom support XDA2 will be the best solution 8)
note added by itsme: this will very likely break your devie!! - better look at sdtool
same problem
i'm having the same problem, installed imate update, now i cant install the t-mobile update.
nobody seems to know how to fix this
HEEEEEEEEEEEEELLLLLLLLPPPPPP
try this
Hi,
another idea... :idea:
try to unzip (using winrar i.e.) the file ruu15283wwe_cdl.exe,
and run the HimaUpgradeUt.exe
It might work!
I got error, the device is not connected, or something like that, while trying to use the original file, but with the HimaUpgradeUt it works!
Tomer
Check this out http://forum.xda-developers.com/viewtopic.php?t=4785
First it was a Phone, then it became a computer phone, now it is camera computer phone... what will be the next?
Click to expand...
Click to collapse
A camera computer phone with a stable, reliable OS? Oh well, we can dream....
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
tjs0509 said:
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
Click to expand...
Click to collapse
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Is anybody can help you.I have same problem.New atom exec software running properly on my device, but phone function is not running.
tatarogul said:
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Click to expand...
Click to collapse
you cannot fix yourself, you must send to O2, the method you used killed the bootloader.
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
I purchased a Taiwanese Iolite (T4242), comes with Chinese version.
I used the QMAT to Change the CID to SperCID and than Just flashed it with :
_file_RUU_Iolite_HTC_Europe_1.09.401.3_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe
IT WORKS FLOWSLY... and my device is now WWE.
How to do it:
I just followed the instructions on the http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard&action=BackLinks:
• Download QMAT and MTTY from http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
o The latest copy of QMAT is also found http://revskills.de/pages/download.html
• A spare microSD card
• Optional: a card reader
Format your memory card for FAT32
• If you have a card reader, go to DOS and type:
format <volume> /FS:FAT32 /A:4096
where <volume> specifies the drive letter of the SD card. For example: format d: /FS:FAT32 /A:4096
Run QMAT to create the Gold Card
1. Put the newly-formatted SD card in the working WM device and connect to ActiveSync
2. Run QMAT, go to the Hardware Forensics menu, and then select "Generate HTC Goldcard"
3. Select your device's key (Iolite)
4. Get the SD Card Serial from WINCE Device
5. Save the Gold Card image to the SD Card
6. Put the SD card in your device and put it into bootloader mode (hold down the VolumeDown button and press the reset button).
7. Now you have a card which gives you SuperCID.
8. With the card inserted into the Iolite, which is in bootloader mode, connect the Iolite via USB to ActiveSync.
9. From your PC, run the RomUpdateUtility.exe from the RUU folder containing the WWE shipped ROM
It should start flashing if everything is configured properly!
Good Luck
Thank you for your info but the steps are hard to follow, admire your patience!
I flashed mine without making a GoldCard to unlock my Iolite. Mine was in CHS and after flashing become Europe WWE. I am looking for an Asia WWE. There is one in the forum but it can't be flash and I don't know whether it is because it is RUU .... _Test.exe and not ... _Ship.exe
Maybe the GoldCard unlock method will work and not sure it is worthwhile to try.
In fact it is very easy.... if you read it carefully you see that it is just connect your device with a formated sd and than reboot it to boot loader...
The next is flash with any ship rom.
Seems that your country id matched the rom you flashed.. however you will not be able to flash any-rom.
As it seems to me many users are stucked with rom flashing .. Hard SPL has not been around yet.. so this is a nice solution and once again - very easy!!!
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
You have to purchase a license.
domestik said:
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
Click to expand...
Click to collapse
Yes you are right. I did purchase a license. Trojan??? please explain.
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
MTTY check-up
domestik said:
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
Click to expand...
Click to collapse
Mmm.... in fact, I did copy the entire directions of "Howto", however I did not even use the MTTY.. pay attention that in my notes, I ignored checking of SuperId setup. The Mtty is required just to check that you have a superid before flashing. It is not required (I think so...) with this machine... it wull not flash if the SuperId did not load.... so just to make it simple : connect the machine, setup the SD card and flash ..... easy no?
I will not load the MTTY from Rapidshare I trust that you checked it and since it is not required... I suggest that you eliminate this step.
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Need to use the written SD each time...
koalaii said:
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Click to expand...
Click to collapse
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
borce_razor said:
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
Click to expand...
Click to collapse
Yes. Success with Jade, HD and Iolite WWE to RUS
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Where supercid down!!!!! Buildor, making a link! Thank you!
Galaida, can you try to explain what have you done and what did not work for you? perhaps we can help to resolve the issue?
Should work.... please include in your answer the name of the rom you tried to flash and error messages that you received while in process of the Gold Card.
Link to QMAT
LITANG said:
Where supercid down!!!!! Buildor, making a link! Thank you!
Click to expand...
Click to collapse
I am not sure if this was requested... however here is the link to the "home" of the utility:http://revskills.de/pages/download.html
I suggest thta you get it from this site, as other users already reported RapidShare and other may have a Trojan as well.
QMAT
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Galaida said:
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Click to expand...
Click to collapse
try typing "boot"
avocaz said:
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Click to expand...
Click to collapse
Can anyone offer me some insight please?
avocaz said:
Can anyone offer me some insight please?
Click to expand...
Click to collapse
I can help, PM me
Unregistered QMAT cannot create GoldCard for Iolite.
Dubi said:
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
Click to expand...
Click to collapse
Dubi, wait a minute, do you have a registered QMAT or an unregistered version?
As one of the forum member commented, it will take 20 Euros, (more than $30) to register QMAT in order to make a GoldCard with the method you mentioned.
Can you confirm that?
Regards,