Hi everyone,
I've tried to upgrade my PDA from:
ROM version - 2.06.00WWE
Radio - 1.14.00
ExtROM - 2.06.100a
to
ROM version - 2.06.00WWE
Radio - 1.18.00
ExtROM - 2.06.100a
but it went wrong during the erasing proces. The only thing on my grey screen is USB and v1.02. I've tried the setup again but it keeps by zero percent during the erasing proces, followed by error 112. Also I've tried a hard reset but nothings hapens. After the hard reset the screen shows USB and v1.02.
Can someone please help me out.
Many thanks
powerkite
problem solved
I had ot give the device a hard reset (you know styles with on/off button) in combination with the button between both phone buttons. After this run the upgrade again. It will not show information of the device version, only the version you want to upgrade to.
good luck
powerkite
Hello Powerkite!
Hod did you manage to upgrade a Qtek2020 to rom version 2.06. I am lookingall over to do so, but I can't find a good (clean) solution.I am not a programmer or a computer freak therefor I am looking for an easy solution.
thanks
Eddy
Try the following link: http://forum.xda-developers.com/viewtopic.php?t=13588&postdays=0&postorder=asc&start=0
Related
Hi
Ive just been on teh orange site, and I see there is a new ROM available http://web.orange.co.uk/story/sm_1047574.html
The new version has an operator version 3.661.230 (MMS version). But my SPV does not seem to have an operator version
Currently I'm running:-
Rom version 1.60.00WWE
Rom date 12/03/03
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
Is it worth upgrading?how will I benifit?
Cheers
JustinP
Hi,
Checked out the new upgrade from Orange and it works perfectly on my SPV M1000.
The benfits of upgrading are that you will be able to send MMS messages from your phone without having to configure everything yourself (which I had to do!)
The other benefits (apparently) are better radio and GPRS, but I haven't noticed any difference yet.
Also, while I was upgrading, I had a message saying there was a problem and to start again. Don't worry if this happens as I reconnected the phone and it installed fine.
Hope this helps!
Thank you!
First of all THANK YOU justinp for spotting this and sharing it with us!
I've also been calling Orange trying to find out about updates, but unfortunatly with no success.
Second to all:
a) I share justinp question, but my setup is a bit older:
Currently I'm running:-
Rom version 1.52.00WWE
Rom date 10/23/03
Radio version: 1.05.16
Protocol version: 1337.16
ExtROM version: 1.52.56
I could not find anything looking like the 3.661.230 where they indicated it.
b) Once I am going through the asshole of a a ROM upgrade, are there real advantage in going for the imate 1.72 update and going through a slightly more complicated procedure?
Just to put into context I already have installed thanks to this forum an SMS SW version I am happy with and I want to buy a BT GPS in the next two month so if you know for sure that it is not going to work either with my ROM or the new one from Orange please let me know!!!
THANKS!
Chris
Orange M1000 Upgrade ROM Thur 12th Aug 2004... Problem
Hi,
I upgraded my ROM to the latest from Orange UK and my bluetooth headset (Logitech) paired OK and I can hear the people talking, but they CAN'T hear me!
Anyone had this type of problem before? I have used the MMS version. Today I will try the NON-MMS version and see if that allows 2 way communication via Bluetooth
Thanks
Nitesh
I just upgraded my ROM and now I cant see the STORAGE folder. Anyone else have this issue?
Storage folder missing
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Re: Storage folder missing
nbharadia said:
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Click to expand...
Click to collapse
Hi,
You say you have problems with the Storage/Storage card going missing - when you performed the upgrade, were these still visible until you restored things with Sprite because this might be the problem if you are restoring an old configuration with an updated ROM.
I haven't tried my phone with a Bluetooth headset, I got the MMS version, will let you know if I have the same problem, but everything is working fine on mine at the moment.
Hi
I have installed the upgrade, everything works as well as it did before, time will tell if there are any improvements.
After an upgrade dont do a restore as the old backup is not compatible with the new OS. Its just the way PPCs work. I'm afraid you need to re-install everything from scratch, it too me about 4 hours, but its done know.
Cheers
JustinP
m1000 rom
hi guys
any chance someone could post just the extended rom from the up grade cheers
To get the upgrade click on the link I posted in the first post of this thread
help
Just tried this update and received an error message.
Took the phone out of the craddle and performed a soft reset..
Screen still says "Serial V1. 03"
I cannot get it to do anything.
How do you perform a hard reset? Have tried pressing reset button with no battery (battery catch up and down) and tried letting the case touch the pins on the phone which can reset it.
TRULY HELP!!! PLEASE PLEASE HELP (please!)
With thanks
Dave.
yep ive just done the same,
yep ive just done the same, been trying for 1 hour now to get it running but no luck.
just spent an hour on to orange trying to explain the phone now neads replacing but they cannot send out till tomorrow.
lets hope it has the new rom installled or i may be in the same boat tomorrow
It now works!!! PHEW!!
Tried the hard reset & nothing happens.
What I did was hard reset then tried the update again... software now tells me that phone is now not compatible with the update.
I then repeated the above 17 panic-stricken times (both reset then update) and eventually it started the update process. Has now finally completed.
I was so worried!
GRPS is still flaky and still waiting for the MMS message sent to myself to go through (a bit slow).
Quick question for those who have updated
Hi!
Could any of you that have done the update please tell me what ROM version do you get after the update? 1.52, 1.60, the last 1.72?
Have u noticed any improvement with the use of BT (expecially with GPS).
Thanks!
Chris
After the update you will get
Rom version 1.66.00WWE
Rom date 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.230
So far I see no imporvements
Cheers
JustinP
Hard reset ???
I also upgraded my SPV with this ROM with MMS. I found no improvements, but 1 major problem. Sometimes the SPV is in suspend mode, i wait for several of minutes and want to push the power button, the device doesnt seem to react. Putting in the cradle isnt working also and taking the battery out and in again is also a failure. So the only sollution is to hard reset the m1000. Since the upgrade (2 weeks ago) i performed 2 hard resets. You guys also got the same problem? Or do you know how to fix this? I tried to upgrade my orange rom to the original Qtek 1.72 rom, but i got a message 120: error country code. So any ideas?
Urguntly need rom upgrade for spv m1000 orange uk
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Re: Urguntly need rom upgrade for spv m1000 orange uk
saro said:
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Click to expand...
Click to collapse
http://web.orange.co.uk/assets/sw/RUU_v1.1_OrangeUK_v3.66.1.200_Ship.exe
Here you go, although this ROM is quite old now (check the date of the original posts!!
I really miss my M1000, it was my first PPC Phone!
Fin
Thanks for that link.
I needed to restore my m1000 back to 2003SE after an experiment in upgrading to WM6 and realised I didn't have the ROM.
Cheers
J
Thanks
Thanks for the link. have been searching for the rom for about 1 month now.thanks thanks thanks
Hi guys
First of all thanks for everybody who is just reading this ...
I bought a XDA2i from Ebay (Original O2 - UK) - unlocked it via IMEI-Check - everything works as good as possible - i'am happy with my device.
ROM Version: 1.10.00 WWE
Rom date: 12/24/04
Radio Version: 1.00.00
Protocol Version: 1337.39
Extended ROM: -- (nothing mentioned)
Bootloaderversion: 1.01
But the device is taesing me when i try to update the software. I really tried now everything human possible, i have no clue how i can do the upgrade.
The offizial softare ( picked from the O2 webpage) is goin very well, its th only one i can upgrade - the other Roms doesn't work. I got Error Messages concerning countrie, ROM doesn't fit to my device, connection, bla bla ..
With the patched himalaya setup file its possible to start the ERASING of the ROM - but in the RUU Logfile i can see that the process ist stopped after 3 trials, then i have to make a softreset..
Okay i studied now this forum and a german one POCKET PC Phone , since around 2 weeks - but i found no solution. I tried to change the ROMS Operator / Language by th eROM Editor, as well i tried the HEX Editor solution nothing - my device is laughing at me - and i really get crazy..
Before starting my trials i made a ROM Image on a SD ( everything works ver well ) also i read it from SD and saved it to my pc hardrive by using the programm NTRW.
So in my opinion there must be the opportunity to get from somebody a working IMAGE !!! File ( not ROM , no nbf or the files which are already on the FTP SErver) and write it with NTRW to the SD Card - bring the device in bootloader Modus an install the ROM ??
!!!
Does anybody has a working IMAGE-FILE !! for me ( XDA2i O2 WWE) an is able to save that on the FTP.
I really would appreciate your help, but for me it seems to be the last chance to get a newer software on the device.
thanks a lot in advance
Forgive me if I've got this wrong, but which ROM are you trying to apply to the XDA2i? I've got the same phone and there isn't any official updated ROM to put on it. There is a weird kinda one sitting on the FTP but I suspect it's not complete as there isn't a Windows installer...only what appears to be files to be run from the phone itself.
None of the other ROMs on this board will work on the 2i as they're for other phones.
Cheers
Ant
I wonder why there is no ExtROM in your Andes
Ext. Rom is not installed, why during the new software installation i made a soft reset just before the Ext. Rom was going to install itself on the device.
I had a close look in the forum, i studied it - and there were a lot of guys which wrote they have an XDA2i !! with ROM of TMOBILE or IMATE or whatever - not an original from O2..
And i'am looking for one of this guys, who has an XDA2i and a newer ROM - and this guy should provide me a IMAGE file to be able to write it on a SD card ant ugrade this f* PDA
what happens when you try to re-install the latest rom?
My Jamin is totall stuck at the moment after ROM update of Prophet. I cannot even restore it to Factory Defaults. It was successfully upgraded started once but halted when i restarted it, now after the first screen, it only shows a white screen and stays there forever. i tried to restore it to factory defaults. was able to do that aswell but still no luck. the light stays there forever. Active sync ann LAN is showing Limited or no connectivity when i try to connect so i am unable to do anything. Is there any way to restore it back to its previous settings or do anything to make it work. The first screen which it shows only has the following information
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
kindly help.
if it goes into bootloader mode(press Camera button+ while pressing soft reset),download this http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe ,and flash it.....
bootloader
only if u can get into bootloader mode (reset + cam button)
c ya
I fixed my Jamin
Thanks Guys. It worked. I holded the camera key button on the side of the phone and pressed the soft reset key. Then leave the soft reset key but keep pressing the camera key takes the phone in the 3 color mode. After that i connected the USB to the computer and started the ROMUpdateUtility_NV_G4 file and it worked. Now everything is fine. Can someone now tell me from where to install new Windows Mobile 6.0 on my device? At the moment if i goto Device Information onmy mobile, following lines are there
ROM Version: 2.20.7.34 WWE
ROM Date: 7/10/06
Radio Version: 02.07.20
Protocol version: 413.1.03
http://forum.xda-developers.com/showthread.php?t=310452
Upgraded to WM6
I have upgraded my mobile to WM6 now. Below are the details now
ROM version: 4.0.0.0 WWE
ROM Date: 2/15/07
ExtROM Version: 4.0.0.3 PDAViet
What is the difference in the new version Rom 4.0.0.0.4 PV ???
fmmalik said:
I have upgraded my mobile to WM6 now. Below are the details now
ROM version: 4.0.0.0 WWE
ROM Date: 2/15/07
ExtROM Version: 4.0.0.3 PDAViet
What is the difference in the new version Rom 4.0.0.0.4 PV ???
Click to expand...
Click to collapse
4.0.0.0.4,has some HTC Touch software..... But,mate,there are 2-3 threads about it......READ AND LEARN...
hello
please could some one help.
I am unable to flash my rom using to USB way or SD card.
i like to get the new WM6.1 that is out.
rom Ver 3.62.305.5
rom Date 11/06/07
radio Ver 32.87.7020.20H
Extrom Ver 3.62.205.116
jarridbishop said:
hello
please could some one help.
I am unable to flash my rom using to USB way or SD card.
i like to get the new WM6.1 that is out.
rom Ver 3.62.305.5
rom Date 11/06/07
radio Ver 32.87.7020.20H
Extrom Ver 3.62.205.116
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=299462 followed those instructions??
still you're not giving us all the information, get to boot loader by pressing ok on left and power on right, and stylus in and tell us what it says from hard spl etc details on bootloader
what i could see
i tried flash with the old i mate flash fromthe imate web site
and got toe where ti show the three colours
with
herm 100
IPL 1.04
herm 100
SPL-2.03
showing
No Hard SPL.... Welcome to A LOT of reading on how to unbrick your Hermes...
Try to Hard reset your Hermes. hold both soft keys then reset with stylus. hold ALL buttons in until it asks to reset back to factory. Press "R" on the slideout keyboard and then space. Follow the prompts.
If this works INSTALL HARD SPL......
Then try to flash other roms....
Hey,
I was given a Softbank X01HT from my brother and I've been using the information on this site to try and get the phone up and working on the Three network in Australia. This site has been really informative and I managed to do a lot of upgrades to my phone and everything works fine except that I get "no service" when I put my Three sim card into the phone. Could someone please help me work out what's wrong with my phone?
Here are the details of my phone:
Device: Softbank X01HT (Black one don't know how old)
IPL-1.04
SPL-2.10.Olipro
ROM Version: CRCs r13.3
Radio Version: 1.47.30.19
I've done the following:
Upgrade to hard SPL (first thing I did)
Run the Hermes_SIM_CID_Unlock_v3a (Though now I have doubts that I did it right)
Installed various rom (mostly for fun)
Installed Josh V15 Manila 2D rom
Installed the dopod AUS 3network WM6 (I thought it would have the right radio and settings)
Installed the CRC rom (I didn't like the dopod rom)
Any help would be appreciated. I've been searching but I couldn't find a good answer.
I'm not very familiar with that phone but you'll need to create a new data connection so that it can connect to 3.
When creating one, make sure you select the data connection type as GPRS, 3G etc, the access point is called 3services, no username or password is required. Should be good from then on.
These forums are awesome, with a bit more patience and perserverance I finally got my phone to work.
I did more searching on the X01HT and found that people were using the radio rom from pof's SIM & CID Unlocker. There was talk about cooking roms and stuff which I didn't want to try, so I decided to just run through the unlocker again. I made sure that I turned off my phone for 10 secs at the end and do a soft reset after the 10 secs, as I was a bit careless with that part last time.
After getting through all the steps, the phone recognised my sim and configured my phone for the three network. I can now connect to the net and make phone calls.
Now the details of my phone are:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
ROM version: CRC r13.3
Radio version: 1.16.00.00
Thanks guys for running this site. I reckon i'll be on these forums a lot in the next few months. There's still a lot of tweaks I want to do to my phone.
Mate, bit of advice, install Hard SPL V7 so there are no "accidents" when flashing a new rom... Its a bit better at protecting your Hermes when you flash than 1.40. Thats an older version of Hard SPL.
Cheers...