Hi mates,
I'm trying to access my Hotmail account through MSN page but I keep getting this error msg
"Your Web browser options are currently set to disable cookies. To use .NET Passport, you must enable cookies."
I'm sure it's enabled coz it's working with other sites. Any other people encountered this problem or it's something wrong on my device ?
problems with web access to Hotmail
Ga Day mate!
Odds are you have, but I thought I would check...
Have you checked the box "Allow cookies" Under the Advanced Tab for Internet Explorer?
That is the only thing I can think of.. oh and I clean out my temp folders often and blow away all the cookies just as often...
Hope that helps...
Laters.
yeah it's enabled .. I even made sure to switch it on directly from the registry ... no luck :? ... I 'm sure it's working coz whenever I access this forum from the XDA I 'm already logged on ... it's not a big deal, but it's annoying :evil:
what if you are connected to messenger ?
it's passport related aswell maybe being connected to it would help ?
I tried that either ... no luck so far :?
I think I 'll have to spend some time with the cookies directory to see if there is a file that was attributed to hidden or read-only by mistake.
I had this (previously seemed to work OK) but suspect the MSN redirector service is not correctly spotting mobile clients, so:
CHANGE YOUR INITIAL/HOME PAGE TO MOBILE.MSN.COM and go from there
It worked!! ... brilliant tip
Me and my collegue are the happy owners of a pair of xdaII units, but.........
I'm getting tired of having to put the units into the cradle everytime we have to sync our calenders etc. Especially because were not neccessarily next to a computer all the time.
Can't this be done directly via BT or IR?
Hope you can help.............
No one???? :shock:
never heard about syncing with anything but a computer
Neither have I, but perhaps someone could help ???
I think it maybe because active sync is a clinet-server aplication not client-client aplication :roll:
Ok. But isn't there somehow to get over this? Isn't it possible to install some kind of server on one of the devices?
Really no one, that could help ????
sure it could be don
but if it will be don depend on
demand
i dont think it's a small task to program it if it's not don yet
being that activesync protocol have alot of overhead which would have to be handled too like explore device and other such things
so programming it would be alot of work
and why if it dont exist already could be that
i believe 99% of people have 1 pda which they sync with 1 pc with outlook
and if 2 people have to share tasks, contacts and such
their outlook connect to a exchange server and handle it that way
pda is personal so i dont think that many people want to sync their personal stuff with somebody else's personal digital assistant
if you are looking for pointers as how you can make it your self
i sugest the developing and hacking it forum
since this upgrading forum really is more related to
upgrading the rom
and your post would often get pushed down the page so people cant see it pretty fast so if somebody did know something they would never see your post
if u use WM5 magneto, just copy pim file from root to other PDA...
That will not work!!! Then I'll erase the new contacts from the unit, the pim file gets transferred to.
I've read many posts, and also the upgrade guide, but I still cannot understand what ROM should I use.
I've found many comments on PDAViet, Cristal, ShadoW, etc., but I've not the competence (and the proper english language skill) to know what is the better choice.
I know that newbies are not well tolerate by experts, but I really need help.
1) What should i choose?
2) The upgrade guide is useful for any ROM?
Please any help is appreciated
look at the screenshots and choose the rom that you like best.. there is no best rom but there is a best rom for your needs and only you know whitch rom that is.
Yes I know.
Ok, can you tell me what ROM (of the Cristal or PDAViet type) is more stable and complete (in you opinion)?
sammis9 said:
Yes I know.
Ok, can you tell me what ROM (of the Cristal or PDAViet type) is more stable and complete (in you opinion)?
Click to expand...
Click to collapse
I can't tell because I only use my Prophet for cooking now but I tried Crystal 5.1 and shadow 1 and shadow Touch. and they are all good although there have been some problems reported on all of them.
But you can also try one of my roms
Ah, ignorance is a big problem. For me is very difficult to read (and understand) dozen of threads. Now I have WM5 and I need an advice to upgrade to WM6.
By the way, I will try to flash some random ROM.
I will follow the upgrade guide, it's right for all ROMs?
An when I flash a ROM, the content of my Qtek will be erased?
A little Help
Yes, you'll end up lossing all your data and aps, so choose your ROM carefully. I've installed Fantasic 2.04b and now Gullum's Touch Xb, since I coudn't fix the problems on wi fi and bluethoot on the Fantastic.
First thing you need is a WM5 Basic ROM, I've user PDAViet Temp on Step 1 (Prophet_PV_Temp.zip). Just follow the guide (the old one).
Choose "ROMUpdateUtility_NV_G3.exe" witch is included on this Step 1. Remember that is normal that the process lock itself on 80/85% porcent of success for 10 minutes, allow it to run a max of 30 minutes before attemp any rescue.
As soon as the PDA resets, it will ask you to tap on the screen to start using Windows 5. Instead, execute the BAT file on your Step 2 choosed ROM;
In "ProphetTouchXB.rar", the installer is "Upgrade_ROM.bat". This updater works for G3 and G4 phones as well.
You'll receive a DOS windows with some cannot locate file error, disregard those. This process is the longest time comsumer. When the bat file finish you'll see a "Press any Key...." message in DOS.
Now you need to hard reset your device, press the camera button and the Comm button and the soft reset with the pensil (all at the same time!).
Most likely, when WM6 stars you'll not be able to access Contacts, it will close itself, you'll nedd to "Clear Storage", Start|Settings|System|Clear Storage (On Touch Xb), must performed until you see some action, if nothing happens after you click the option, then it didn't execute.
After you do so, you'll need to soft reset, change regional settings, date, city on the weather forecast, and that's all
Be aware that Touch Xb do not include Windows Live Messenger, so you can install it on SD or use some modified X ROM. Also MS Voice Commander 1.6 needs some tricks to anounce incoming voice calls, and you gonna need some registry changes to improbe volume on that program.
Previous steps that are recomended:
*Detele Sincronization profile in Active Sync 4.5 (and install 4.5 version), all your contacs would remain in MS Outlook, make a copy of the documents.
*Sicronize in Visitting mode (cancel the sicnro option windows, witch ask you to choose what to sincro, Contacts, Calendar, etc.). You will only have the "Expore" option in Active Sync.
* Charge the battery on 100%
* Use a notebook whit full battery load, of a PC with a UPS.
Hope it helps-
Many thanks!
I've installed Crystal, it works, but the real problem is ActiveSync 4.5; it's a very buggy app.
1. First I've got the problem of 85010017 error, and after many attempts, syncronizing 10 contacts at time, it seems I've solved the problem
2. Then the rapimgr.exe has become to use 99% of CPU. No solutions.
3. Restarting the computer, activesync have lost my previous settings, and now I should re-sync all contacts!
I'm very tired: I've seen that there is a program Nokia Intellisync, that could replace activesync. Maybe I will test it.
sammis9 said:
Many thanks!
I've installed Crystal, it works, but the real problem is ActiveSync 4.5; it's a very buggy app.
1. First I've got the problem of 85010017 error, and after many attempts, syncronizing 10 contacts at time, it seems I've solved the problem
2. Then the rapimgr.exe has become to use 99% of CPU. No solutions.
3. Restarting the computer, activesync have lost my previous settings, and now I should re-sync all contacts!
I'm very tired: I've seen that there is a program Nokia Intellisync, that could replace activesync. Maybe I will test it.
Click to expand...
Click to collapse
Any help??? Sadly, Intellisync needs activesync to work. I've googled anywhere, without answers!
No help this time
Its strange, you shoun't have that problem, active sync 4.5 works flawesly for me, with Fantastic 2.04b and Touch Xb, are you sure you format the storage area?, it is supposed to happens after the hard reset, but in my case had to be done manually in both occasions.
Yes, I do it. I had this problem months before, with WM5 and activesync 4.5; then I read some discussion about it, and downgrade to activesync 4.3.
Now, with WM6, the 4.3 is not supported, so I have installed the 4.5, but it's impossibler to use it. 99% CPU used, 85010017 error on sync (I know they are two different/indipendents problems).
try uninstalling & installing back activesync & see if it helps
also do a proper hard reset after upgrading
congrats! you managed to upgrade your prophet!!!
I bet is a Windows problem...
Its a Windows or USB Problem.
Update BIOS
Reinstall Windows XP SP2, or some up to date Vista.
Reinstall Activesync
If none of this helps, check for a bargain motherboard, if you got a PC Chips, ECS, Asrock, Gigabyte, Aopen, Foxcomm, drop it in the trash container and buy some ASUS, or if you are in a budget, MSI.
wanwarlock said:
try uninstalling & installing back activesync & see if it helps
also do a proper hard reset after upgrading
congrats! you managed to upgrade your prophet!!!
Click to expand...
Click to collapse
I've done both things, but without results. It's a common problem for many users, as I've seen in several forums.
The 85010017 error seems to happen with AS 4.5 due to a 2 minuts limit in sync. If, in your first sync your data are many (contacts, calendar), then you can reach this time limit and you'll never be able to resolve it (4.3 had no time limit and works perfectly).
The "99% CPU" error may be related to some communication bug within handheld and PC, that generate an idle loop. I've tried also to change the connection from NIDS to serial, but I wasn't able to let it work.
http://forum.soft32.com/pda/consumes-99-CPU-ftopict77575.html
http://www.spawnrider.net/blogs/2007/10/26/active-sync-45-solution-au-probleme-rapimgr/
sammis9 said:
I've done both things, but without results. It's a common problem for many users, as I've seen in several forums.
The 85010017 error seems to happen with AS 4.5 due to a 2 minuts limit in sync. If, in your first sync your data are many (contacts, calendar), then you can reach this time limit and you'll never be able to resolve it (4.3 had no time limit and works perfectly).
The "99% CPU" error may be related to some communication bug within handheld and PC, that generate an idle loop. I've tried also to change the connection from NIDS to serial, but I wasn't able to let it work.
http://forum.soft32.com/pda/consumes-99-CPU-ftopict77575.html
http://www.spawnrider.net/blogs/2007/10/26/active-sync-45-solution-au-probleme-rapimgr/
Click to expand...
Click to collapse
I'm sure you're right, but... On the other hand, many (I think most) people are using AS 4.5 without any pain, even with big sync-files. So there should be something different on your PC.
Not really a helpfull solution, but it is a waste to spend your time on generalities if they aren't the cause of your problem. Anyway, good luck.
It's not my PC, as I have the same problem with 2 different PCs (acer aspire, macbook boot camp), one with xp home sp2 and another with xp pro sp2. And I cannot understand why AS 4.5 is full of errors and 4.3 no.
It's really bad if the only solution is to downgrade to WM5 to use AS 4.3...
sammis9 said:
It's not my PC, as I have the same problem with 2 different PCs (acer aspire, macbook boot camp), one with xp home sp2 and another with xp pro sp2. And I cannot understand why AS 4.5 is full of errors and 4.3 no.
Click to expand...
Click to collapse
As I said, I can't help you, but keep in mind that thousands of WM users are doing the job with AS 4.5 without any alteration. So, I don't want to offend... But I think you do something different. And if it's not the PC, then there might be something out of order with your PPC (hardware or any third-party software?) I asume you tried different USB-cables as well?
rondol1 said:
As I said, I can't help you, but keep in mind that thousands of WM users are doing the job with AS 4.5 without any alteration. So, I don't want to offend... But I think you do something different. And if it's not the PC, then there might be something out of order with your PPC (hardware or any third-party software?) I asume you tried different USB-cables as well?
Click to expand...
Click to collapse
I've used different USB cables. I know so much people have AS 4.5 working, but, as you can see by the links I've posted before, I'm not the only one with this kind of problem.
I think, simply, that if certain conditions happens, then you got those errors (also if you are not me...). The problem is to identify these conditions to resolve the problems. A third-party software? Maybe.
rondol1 said:
...any third-party software?
Click to expand...
Click to collapse
I've clean-installed xp pro sp2 on a new partition, no firewalls nor antivirus, no third-party software except for outlook 2007 and AS 4.5.
Always the same two problems.
sammis9 said:
I've clean-installed xp pro sp2 on a new partition, no firewalls nor antivirus, no third-party software except for outlook 2007 and AS 4.5.
Always the same two problems.
Click to expand...
Click to collapse
And on your PPC? Anything out-of-the-ordinairy installed?
If not, maybe you should try to sync with only a few contacts, appointments etc. At least you can find out if it has something to do with the file-size (I don't think it's related, but you never know). If you hadn't tried it on several PC's I would have bet that is was a hardware/BIOS issue.
I'm puzzled.
On my Qtek s200 there is a fresh install of crystal 5, that erased all. I've not downloaded any other program.
Maybe the problem is the file size (at least for the 85010017 error); for the CPU 99% error, I really don't know how to do.
Installing a demo of Intellisync, the 85010017 error is bypassed (because the AS syncronization is not used), but not the CPU error, because Intellisync needs however Activesync to works.
up to now I used 'https://mail.domain.com' for outlook exchange mail but last week due to upgrades OWA access has been changed to 'https://mail.domain.com:12345/'. Surprisingly, when I tried to modify this on my HD2, the phone just ignores ':12345' so I cannot access mail. Can't find a solution. Anybody out there had the same problem and solved it? thanks.
Get them to change it back to 443
I can't guarantee it will work but you can make the change stick by editing the registry directly. Search your registry for mail.domain.com and add the port number there. I know it saves the data and it shows up in my Outlook Mail settings. I know it stops my mail from synching. I am not, however, going to change the port number on my exchange server to see it it will actually synch...
tks guys
cant do that xaccers.
AA, what you say sounds good. Whereabouts could that registry be? Im not so used to messing up with registries. Any info will help
Just search the registry for your mail.domain.com, it's the only entry.
just did it and now the number sticks but still wont work. I t just says 'connecting..' but does not. same as before
That's interesting. It sees the change and tries to use it but is unable to parse the difference.
For those not understanding the issue the ":12345" after the https://mail.mydomain.com is changing the port that the https protocol uses from the usual 443 to 12345. Normally, his HD2 requests service from the 443 port on his Exchange server and it works fine. His admin has changed the service port on the Exchange server to 12345 probably as a means of "hiding" his server, (security by anonymity isn't very good security btw). The unfortunate thing is the his HD2 is unaware of the ability to specify a different port in a URL so it attempts to create a connection to the literal URL instead of changing the service port in the request itself. DOH!
Sorry to tell you this mate, but it's a known issue that you can't change the port number that is used by exchange services in windows mobile. I'm guessing that you have web access with the owa.website so you're stuck with using that.
just made my day. sad to hear that.
have been searching for days now and could not find the answer, so that's it.
not even htc hotline nor my administrator, who told me that before changing the owa access they had tested with iphones and other with android and working perfectly. so now I have a brand new hd2 and have to access my mail via owa which I guess you will agree with me that is a bit messy/slow. nobody has heard of any update by changing rom or else??
javibuzon said:
just made my day. sad to hear that.
have been searching for days now and could not find the answer, so that's it.
not even htc hotline nor my administrator, who told me that before changing the owa access they had tested with iphones and other with android and working perfectly. so now I have a brand new hd2 and have to access my mail via owa which I guess you will agree with me that is a bit messy/slow. nobody has heard of any update by changing rom or else??
Click to expand...
Click to collapse
I've actually got the latest official ROM on my phone and there's still no extra settings anywhere that allow you to specify a port.
thanks John and have you heard anything abt the possibility of android on this phone?
javibuzon said:
thanks John and have you heard anything abt the possibility of android on this phone?
Click to expand...
Click to collapse
The beauty of Android is that you can dump the system apps (such as the default email app) and just download a new one from the market.
The email app that I use is the one that was supplied with HTC Sense, and that doesn't seem to have anywhere to enter a port number, but it may work with the port number specified in the server URL - I don't know.
Do some reading up and see if you can find an Android email app that allows you to use a custom port. All I can say for sure is that the one I've got on mine is at least as capable as the standard email app on WM.
hey guys im trying to change the sync relationship but it doesnt do anything, ive forgot the device rest the device and still no luck if someone could point out what im doing wrong please guys really want to use the wireless sync function but it wont let me because my relationship is set as guest in zune please ......
pleaseeeeeeeeeeee
bump
bump
Was this ever resolved? I too am having this exact issue. This is my third Windows Phone device, but the first to have this problem. It has no issues connecting to the Zune software. I am also able to dev unlock it. But it will not let me change from guest.
NVM - Found the solution in another thread. Thanks!
ddrizel said:
But the brief mention of remote drives above lead me to the solution. I do have a network drive, but it was connected just fine, so I didn't think anything of it.
But then I remembered that I used to have another hard drive in this machine way back when I first setup the Zune software, and I set my Pictures in the Zune software to come off that drive. It was V:\images, but without that hard drive in my computer now, there is no V: drive. The problem is that the Zune software seems to break in a rather unpredictable way when one of the paths for your collection libraries isn't valid. The larger problem is that from the Settings->Software->Collection screen, there's actually no indication that there are any problems. It's a silent failure occuring somewhere in the Zune software that leads to this nasty behavior of being stuck in Guest mode. Worse is that if you try to remove the offending entry, but don't add a new one, and just click OK back through the windows without looking too closely, the Zune software doesn't make any changes. If you don't provide a valid path to replace the invalid one that it had, it just leaves things as they were before you removed the bad entry.
So, I removed the entry that I knew was bad (even though the Zune software wasn't complaining about it), and added a new entry that I knew was good. I clicked OK back out through the windows, then clicked on that "change sync relationship" button again, and followed the steps, and BAM! No more guest relationship!
Just to test it out (because I am a tester after all) I "forgot" the device in the software, messed up my library locations again with a temporary mapped network drive, and replicated the bad behavior and the fix again.
Click to expand...
Click to collapse
Is this for just for wireless syncing or with cable also?
Sent from my Nexus S using XDA App
The relationship applies to both. Either the device is a guest or it is not - regardless of how you choose to connect it.