Hey guys, ive been reading many threads regarding issues with the sx56, but after going through most of them, it seems ive been left with more questions. Anyway, my problem is , first of all the reception sucks, signals drop every now and then and i hate saying "sorry? ur breaking up" now from what ive learnt so far from most of the posts is that this "signal" issue is due to the radio stack. My siemens sx56 is running:
Windows Mobile Pocket PC 2003
Model No.: PW10B1
ROM version : A.30.09.ENG
ROM date : 01/01/04
Radio Version : A.33.02
Protocol Version : 1.3.3
now, i have been thinking that maybe i should try downgrading the radio stack while still using ppc2003 , but ive seen many posts in which people have bricked their phones due to downgrade.
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Thanks.
snakey said:
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Click to expand...
Click to collapse
The A20.10 and the 6.xx Version should work on your phone, cause it's a PW10B-Model....
Flashing of Radio Stack is everytime little bit danderous like all flashing.
If the process doing fine, there should be no problem. I would do removing the sim and doing a hardreset before flashing the radiostack....
snakey said:
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
Click to expand...
Click to collapse
This is an issue of the A30.0x ROMs. If you're going to use the 4.01.12 then there won't be the increasing sound problem.....
snakey said:
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Click to expand...
Click to collapse
There is no WM 5.0 available for the Wallaby devices. Newest, but in my eyes really buggy ROM Version is WM2003 Second Edition....
Only othe rOS running on the Wallaby is Linux, but until now it's not running as complete, as you can use your phone and all the other functions....
Stefan
thank u for the reply stefan! just a few more quick questions:
1. How do i soft/hard reset? iam sorry iam new to pocket pc's.
2. The ROM u mentioned ,4.01.12, does it have any bugs i should be aware of?
3.Which radio stack do you think is better? the 6.xx or A20.10?
4.How do i install the radio stack and the rom? i downloaded the radio stack ZIP file and the rom is being downloaded. The radio stack zip file has no WIN32 executable file. Do i need to copy it over the phone ? how?
5. Should i install the rom first or the radio stack?
Thanks.
1. Softreset is pushing your stylus once in the little hole on the left side at the bottom.
For Hardreset you have to unscrew your stylus and push twice in the very little hole on the right side at the bottom.
2. The 4.01.12 has like all other WM2003 for the Wallaby the problem that under certain circumstands the sd-card will be formatted. I have used WM2003 for about 2 weeks and had this problem once.
3. Don't know which one is better. Never used one of them cause i have a PW10A-Model
4. You have to put the files in one folder on your SX56 and run the exe directly on the device. Pay Attention to have enough power....
5. It depends on you.....
Stefan
ok this is weird... i upgraded my rom to 4.01.12, after the O2 Screen, normal setup procedure comes.. the thing which bothered me was when i clicked on DEVICE INFORMATION..it is now showing model PW10A-MODEL whereas its a PW10B model,says so on the sticker, and the radio stack is still A.33.02 :S
its working though signal problems are still there... i tried the A20.10 and 6.xxx radio stack versions but they dont wanna upgrade , they give messages like "upgrade failed or retry". Should i try other RSU versions like 4.21??
or maybe i need to try that sd-bootloader method? if so, how?
ok you can ignore my previous post about radio stack, i guess i found the solution.
Radio stack upgrade only works if you copy the 4 files of any radio stack archive to the WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
copying to a seprate folder or anywhere else results in 1% hangup or upgrade failed messages. IT ONLY WORKS WHEN YOU COPY THE FILES TO THE WINDOWS ROOT FOLDER OF THE DEVICE . I just upgraded the radio stack to 6.24.00, lets see if it solves my the problem of bad and breaking up signals.
I still havent found out why my wallaby shows PW10A though :roll:
snakey said:
WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
Click to expand...
Click to collapse
Could you specify Windows root folder?
is it \Windows\ or just \ ??????
snakey said:
I still havent found out why my wallaby shows PW10A though :roll:
Click to expand...
Click to collapse
This depends on the ROM used. PW10A is static in the ROM. If you want it, I'm sure I can make a ROM where it's Type is PW10F .....
Stefan
its the \WINDOWS folder.
And the ROM i used was 4.01.12.
By the way, that 6.24.00 RSU kicks butt! havent came across any signal problems at all. Thanks a lot stefan! this forum rules! :lol:
and do let me know about this model version problem, do i need to install any other ROM which will display the correct model version i.e PW10B ??
Got fustrated
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Re: Got fustrated
WhiteWizard said:
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Click to expand...
Click to collapse
please let me know if you find the solution...I have the same problem
Thanks
Yes
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Re: Yes
WhiteWizard said:
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Click to expand...
Click to collapse
can you tell me whcih version of RSU you used?
I have PW10B1 model and I load the XDA-Developers ROM Version 1.1 but I still have problems with RSU..I tried almost all RSU from ftp://ftp.xda-developers.com/Wallaby/ but no succees...
if you have the same model maybe you can send me by email your RSU version...please!
my email is [email protected]oo.com
I have 6.25.02
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Re: I have 6.25.02
WhiteWizard said:
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Click to expand...
Click to collapse
I just did this but when I'm starting at 1% the status bar is disappearing and it seems that is doing nothing...is this normal?
Did you had the status bar until 100%?
Perhaps you have a wrong ROM for that RSU
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Sorry
Yes, I saw my status bar reach 10%, 20% and so on, ultil it reach 100%
Re: Perhaps you have a wrong ROM for that RSU
WhiteWizard said:
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Click to expand...
Click to collapse
here is written tu use for their ROM, XDA-Developers ROM Version 1.1, and PW10B-Model RSU Version 6.24.20 ....but is not working with this also (...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Related
Dear all,
I have tested the WM2003SE (Version_2.06) for some days now and finally found out that one (or the combination) of these extra applications in the Extended Rom will surely KILL the phone functionality if you ever happen to soft-reboot the device while in landscape mode. Here is the list of suspected incompatibles.
- BTPSKeyUpdate_003
- cm_rm_map_o2_v3
- CprogHook.WM2003_2577
- DelAddStarMenu_092404.sa
- delshortcut
- LoadDialogInit_MS_10150402.sa
- startmenu_103wwe
I am absolutely sure that one of these will cause serious device hang once we ever happen to soft-reset while in landspace, but I'm not sure which one. So if any of you have these software installed in version 2.06, please try your best to aviod reseting while in landscape.
BTW, if you happen to know any of these software's intended uses, please also let me know since I"m not sure whether removing them can cause malfunction in other areas. Thanks
Hi there,
thanks for the alert. But i don have the problem like you said. I soft resetted my 2.06 more than 10x in landscape mode but still no reset/hang/idle/trojan virus.....
Guess i'm just a bit lucky!
:lol:
BTPSKeyUpdate_003 - cannot cause hang. It is used only once just after hard reset
cm_rm_map_o2_v3 - some O2 customisations. May cause hang.
CprogHook.WM2003_2577 - my program. Conflicts with some programs and may hang your device on boot (device simply stops responding to keys/stylus). To check this - delete \windows\startup\cproghook.exe and reboot. On most of devices it works fine, but have problems in landscape mode.
DelAddStarMenu_092404.sa - ?
delshortcut - ?
LoadDialogInit_MS_10150402.sa - this is a patch for 2.20CHS OS. Should not be used on other ROMs, but it should not hang your device.
startmenu_103wwe - ?
I've seen that removing SD-card during boot helps sometimes.
did any one faced this?
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
BEWARE of changing ur radio stack.. 90% ur will have a dead phone once u wake up
Re: did any one faced this?
ammar said:
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
Click to expand...
Click to collapse
Yeap, your suspicious is very true. Both of them are different. But how different is different would need mamaich to answer how he first got this radio stack!!
:lol:
i used 1.08 radio stack... no problems here.... downgraded it from 1.17
Microsoft Voice Command
Anybody encounter problems with MS Voice Command in WM2003SE ROM?
When I soft re-set the XDAII device, it sorts of hang the devices. Always need me to soft reset a few times. I've since remove it and soft reset is ok.
MS Voice Command in WM2003SE ROM
:arrow: MS Voice Command in WM2003SE ROM working great !
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
mmbmvc said:
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
Click to expand...
Click to collapse
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
In your screen you can see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No -------- should remain NO
3 Storage = No ------------- change this to YES
then press the big round button(nav pad between the call and call end buttons)
the device reboots.
you go to bootloader by press Power + round big button + soft reset, then downgrade
no need to hard reset
ActiveSync doesn't work
I can't downgrade to WM SE because ActiveSync does not work
I could downgrade using bootloader mode nevertheless ActiveSync did not connect my device.
I have uninstalled AS 4.0 and installed AS 3.8, but it doesn't work! I can connect my XDA II. Could you tell me what is the reason?
Yazzon,
I have downgraded without any issues. A matter of fact, I kept Active Sync 4.0 instead of going back to 3.8
What is the issue with Active Sync, have you tried uninstall and reinstall? Which version of Active Sync are you using?
I've reinstalled AS versions: 3.7, 3.8, 3.8 - Polish. After reinstallation, when I cradle my device, AS connect XDA II but I can't explore device and I can't synchronize. I reinstalled AS many times but no results.
In order to return from wm2005 to wm2003se I used himaupgradeut_197.exe in bootloader mode and the original file nk.nbf of wm2003. To me he worked to me.
I used activesync 4.0.0.
Also it is possible to install wm2005 again using himaupgradeut_197.exe.
Please Help me! Can't downgrade!!!!
I tried: himaupgradeut_197.exe in Serial Mode
I tried: hard reset. Didn't really do anything
What did I do wrong. Always get a connection error... 101
Please Help!
In order to upgrade to 2005, you have used himaupgradeut_197.exe?
ive downgraded by puting it 2 boot loader mode and then put it in the cradle (with AC 4.0) and then run the HimaUpgradeUt.exe from my rom.
and it was 2003se again
Downgraded from WM2005 to 2.20
:arrow: I downgraded from WM2005 to 2.20 without any problems .
Extended ROM sill working .
And I am keeping ActivSync 4 becouse giving me no problems .
By the way ... My ActiveSync 4 Build 4328 .
Is it the latest one ?
I think the key to a sucessful downgrade from WM2005 is to keep AS 4.0 on the machine while you have WM2005 on your PPC. After the downgrade you can go back to AS 3.8. In my case I decided to keep it .
However I ran into one issue with AS 4.0 after the downgrade. After installing MS Voice Command 1.01, I tried to upgrade to MS Voice Command 1.5 and it keeps complaining about not being able to find previous versions. I went to another machine with AS 3.8 and tried the same thing with the same files and I had no issues.
Nonetheless I am keeping AS 4.0 until I run into something I don't have a workaround.
I got AS 4.0. I did not upgrade with..._197.exe. I did it with some other.
Maybee someone can give me a link to a clean 2003se without any nicknack? Maybee that works. Used the aussie version. To downgrade.
Thanks in advance.
Upgrade WM2005 with bootloader v. 1.06
Hi all!
Has there anyone upgrading to wm2005 with bootloader version 1.06? Thought of trying it too, just that afraid can't downgrade to wm 2003 SE. Coz I'm aware of dcs threads, with bootloader version 1.06 it isn't likely to downgrade from wm 2003 se to a normal ppc 2003(of which is of the original rom). Hope to hear inputs. thanks.
ferioz
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
From which Rom version are you trying to downgrade? What is your bootloader version?
Downgrade to WM 2003 SE
To those having problems in downgrading, this might help...
I was just trying out of the thrill for the new wm 2005. Before that my previous Rom version was WM2003 SE. Flashing to wm 2005 was rather smooth sailing; there isn't any hindrances like country id error code and so forth.
Thanks for those threads from the geekz here like softworkz, xda2jojo, dewild1(who's been reincarnate into a new creature at xda-developers ), and other geekz who's involved in this so called immature(by MS) project. I was literally read their threads and get the ideas from it.
Was initially excited on the new OS, but when I start to touch on it, oh well, it's too good to be true... Nah not to critize much of this... The bottom line, it's a total new looks and new sounds, especially on the click at the start menu, I kinda like that new sound... Good interface but it has lots of buts...; camera button wasn't bound, so when click on camera button is just like a dummy button...
While I'm typing this, my downgrade process is still working at the background, so I pretty much believe that it gona work as it still does the process, so confidently would want to contribute what I did to downgrade.
1) Sit back relax, don't panick = it doesn't/will never bring to solution. Take a deep breath and always feel with hope
2) All you need is to be able to get the device into bootloader mode, my bootloader version is 1.06, so wouldn't be sure if it works on other version, hopefully yes.
3) During the bootloader mode, dock your xda 2 onto the cradle, and get ready of your previous Rom files, double click on HimaUpgradeUt.exe and just wait for it to start doing the magicX...
I hope I didn't misss any step here, even if I did, please excuse me, coz i'm just a newbie hehe....
Ok hopes of getting back your xda 2 alive is yet to process, just fireaway
ferioz
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
go to bootloader b/4 you put your device into cradle
Weeeeeell -
i have no clue why! but I managed to get it running.
I just inserted into the cradle and it worked!
Sometimes you just have to go to bed and try it the next morning
Only thing I did was to pull out the Battery over night... Maybee that did something.
Just for Info:
Bootloader V1.02
ROM : Can't See is just upgrading @ moment.
Btw: The good thing about Wm2005 it is working even if you have no energy anymore... No data will be lost. The Bad thing you lose 128 megs of Ram...
i suggest 2 read this:
http://forum.xda-developers.com/viewtopic.php?t=18122
it discribes how to flash ur phone
Hi Guys
I have just noticed that there is new ROM published on www.clubimate.com today.
As far as i understand it is the same OS version as installed on all JASJAMs sold by Telstra, but just with new radio and maybe new extROM ?
What i dont understand is why it says 1.38.30.10 instead of 1.38.00.10 ?
Maybe some additional customizations for their NextG network ?
Here is the link:
ftp://ftp.clubimate.com/i-mate_JASJAM_telstra_1.31.305.2_106_6275_1.38.30.10_108_ship.zip
Hey, good find!
Dunno if i have time for flashing ROMs today but will have a look at some stage. Lol, dunno what's with the standard OS but nomenclature of radio rom is intriguing.
PS just noticed you're in adelaide. Good form
Hi there...have downloaded the RUU already and made the nbh with GSM.nb only...but have no time to make the upgrade...if someone have made the upgrade already post if it is all OK...
regards,
Primoz
I didnt know we could flash GSM via mtty? Thought we needed an RUU.
Unless im missing something?
mshagg said:
I didnt know we could flash GSM via mtty? Thought we needed an RUU.
Unless im missing something?
Click to expand...
Click to collapse
look in the Wiki the upgrade guide...I have followed the guide to get rid of the SPL, OS, extrom,...and left just the GSM.nb inside and will update via RUU...
Regards,
Primoz
Pc78 said:
look in the Wiki the upgrade guide...I have followed the guide to get rid of the SPL, OS, extrom,...and left just the GSM.nb inside and will update via RUU...
Regards,
Primoz
Click to expand...
Click to collapse
That makes sense
Apologies, im new to all of this... slowly getting through the wiki!
Pc78 said:
Hi there...have downloaded the RUU already and made the nbh with GSM.nb only...but have no time to make the upgrade...if someone have made the upgrade already post if it is all OK...
regards,
Primoz
Click to expand...
Click to collapse
Could you please upload extracted RadioROM to rapidshare or megaupload ?
am doing it now... stay tuned
I extracted the radio rom. It is 1.38.30.10, flashed it with the new Custom RUU works great. I'll test it today to see if there's any noticable difference between 1.38.00.10. Here it is if anyone wants it. When it doubt use Force Using SSPL.
http://rapidshare.com/files/22823346/Radio_1.38.30.10.rar.html
guapinoy said:
I extracted the radio rom. It is 1.38.30.10, flashed it with the new Custom RUU works great. I'll test it today to see if there's any noticable difference between 1.38.00.10. Here it is if anyone wants it. When it doubt use Force Using SSPL.
http://rapidshare.com/files/22823346/Radio_1.38.30.10.rar.html
Click to expand...
Click to collapse
changes are minor... 3G fixes for the 850Mhz networks here in AUS....
well some parts of cingular runs 3g in 850 like here in jacksonville...so might help some of us here too
I have just flashed it, i havent had any problems with 1.38.00.10 on Telstras NextG network, so will see how this one goes. ;-)
Hi all, I've just installed the WM6 Black 1.2 and Hard SPL 1.10 Oli to my Jasjam, very nice. It took me all last weekend to reinstall the Applications and data.
My current ROM is 3.22.200.4 and Radio Rom is 1.20.31.10. I've just want to know:
1. Is it worth just install this Radio Rom only 1.33.30.10 to improve my GSM reception and WIFI.
2. Also if I install the Radio Rom only- do I still have to reinstall every Applications AGAIN.....
Cheers
pl55 said:
1. Is it worth just install this Radio Rom only 1.31.305 to improve my GSM reception and WIFI.
Click to expand...
Click to collapse
About 1000x said there is NO improve in WIFI with radio ROM...this is part of the OS and not the Radio ROM...yes it is worth if you have any older version than 1.38.00.00
pl55 said:
2. Also if I install the Radio Rom only- do I still have to reinstall every Applications AGAIN.....
Click to expand...
Click to collapse
It depends on the way you do the install...cause the latest RUU (original one) make task 28 on the end of the install and this mean HARD RESET...I will do my update from SD card...
Regards,
Primoz
Well I've been using it for a day now and haven't noticed any huge improvement in the radio but I with more use it may prove to be better.
Noticed the new MS Packet Video player. Guess this is to solve the problems Telstra customers were having with no Foxtel sevices on the Jasjam. I believe it was an issue of Media Player not being compatible.
Also a few small changes to Telstra customizatons. No changes to WM5, still AKU 2.3.
Maybe my imagination, but I thought I used to be able to turn on Flight Mode (radio off) and still have WiFi on, but can't now. Also the tab in Phone options to Update Time has gone, and there seems to be one less tab in the WiFi settings. Guess you can get them back with reg hacks.
Funny how everyone raves about how fast WM6 feels when they first install it... this update made me realise how fast WM5 feels when it is a new/clean install.
I uploaded the Radio Only with the Olipro RUUWrapper so it wont HR after you install. Also NON rapidshare mirror.
http://www.bestsharing.com/files/INdT1250288/RUU Radio Only 1.38.30.10.exe.html
A reference:
Last Updated: 27 March 2007
As a further enhancement to the Next G (TM) network, Telstra will carry out a platform upgrade which will affect i-mate JASJASM users and will require them to carry out a software upgrade for their handsets. This software upgrade will be available on a CD and on the www.imate.com/jasjamsupport website.
Customers who purchase an i-mate (TM) JASJAM must be informed prior to purchase that their i-mate JASJAM handset will require a software upgrade. Customers must be told that this software upgrade is available on the www.imate.com/jasjamsupport website. CDs with the software upgrade will be available on request from the website soon.
Post the network upgrade, the customer will need to have installed the new software on their device in order to maintain simultaneous voice and data connectivity.
Before the network upgrade, all Telstra i-mate (TM) JASJAM users will be sent an SMS, followed by a direct mail piece with instructions on how to facilitate the upgrade.
Note: the customer must download the upgrade to a PC then to the handset. There is no provision to download directly from the imate site to customers handsets.
Customers are advised to backup all personal data prior to downloading the software to their device.
Click to expand...
Click to collapse
From that link, the enhancements :
The essential service enhancements include:
• Network enhancement: this upgrade will even further optimize the performance of your i-mate™ JASJAM on the Telstra Next GTM network, taking full advantage of all the latest network enhancements and ensuring you can continue to make/receive calls during a data transmission eg. Direct Push Email.
• Time Zone fix: currently some of your appointments may appear to be shifted forward by one hour. This may have occurred when daylight savings commenced. The service upgrade will help stop this occurring.
• Unknown USB device driver fix: you may have seen an "Unknown USB device" error message appear on your screen. It is extremely intermittent, and only experienced by a small number of devices. The service upgrade will help stop this error occuring.
• Screen Backlight fix: you may have experienced your back light not turning on making it difficult to read the screen. It is extremely intermittent, and is only experienced by a small number of devices. The service upgrade will help stop this occurring.
• Freeze fix: you may have experienced your device freezing up. It is extremely intermittent, and is only experienced by a small number of devices. The service upgrade will help stop this occurring.
• Bluetooth® fix: this enhanced version of Bluetooth® is designed to improve the ability to connect your i-mate™ JASJAM to other Bluetooth® compatible accessories eg. Bluetooth® headset or car kit.
Click to expand...
Click to collapse
"extremely intermittent" device freezes? Some here would beg to differ.
Anyone extracted the cab files from EXTROM?
Hi
Are the new Windows Media streamer install file located in the EXT rom?
Can anyone extract those from the installation file and post them somewhere?
Thanks
JY
guapinoy said:
When it doubt use Force Using SSPL.
Click to expand...
Click to collapse
While it's technically OK to use with the radio ROM you created, it's bad advice in general (particularly if you have Hard-SPL installed). The "Force SSPL" option should only be used to upgrade/downgrade Hard-SPL. The latest Custom RUU (V4) has SPL auto-detect. When it doubt, use that!
naydonov said:
Hi Guys
I have just noticed that there is new ROM published on www.clubimate.com today.
QUOTE]
Hei! Can you look for a spanish Hermes rom in cluImate? Is there one? If so, could you download it for me? Thank you
Click to expand...
Click to collapse
Hi!
long time viewer first time poster.
I have G4 CID LOCKED Cingular 8125 with mfrazzz's Crossbow Reloaded 1.7.1 I have wizard love Rom as Base.
I really tried hard to update (I guess it is really a downgrade) my original Radio from 02.25.11 to 2.19.11 but no matter what I do, it failed.
I tried with every romupdateutility_wizard_noid.exe i could find but I get the same result everytime.
ON PC: I get 260 Error (tried in two machines same error message)
and
On my Wizard: stuck in this 3 colored screen. I see 3 color screen with "RUU" in right upper corner and "USB" on left bottom with IPL/SPL version showing in red If i press reset button, it will boot back to mobile windows fine.
Can anybody help me?
My rest device info:
ROM Version: 2.18.0.0 WWE
ROM date:2/14/06
IPL/SPL: 2.25.0001
GSM:02.25.11
Protocol version? 4.1.13.12
ExtROM version: faria V5.0
My Downgrade
All I did was use the rom upgrade utility from the "wizard love rom" (the one that is in Italian) and the T-mobile radio rom listed in the Wiki.
Worked like a charm!
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
nic2mit said:
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
Click to expand...
Click to collapse
Is your device actually booting up? If so, just download one of the radio ONLY roms. It won't matter whether you have a CID locked phone or not and the radio ONLY rom will not touch the IPL/SPL.
Having said that, is there a reason why you want to downgrade to 2.19? Are you having missed calls issues?
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Probably you read this already
xdawiz said:
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Click to expand...
Click to collapse
A little bit off regarding your initial post but here´s good feedback on how both radios behave.
http://forum.xda-developers.com/showthread.php?t=312834
I've had some problems as well.
I used the tool that came in the download to downgrade to 2.19 (I am having missed calls problem) and it won't.
I'm using a Windows Vista and already did the whole thing to update drivers with the one given on the forum over here, yet, everytime I run the thing it crashes and then I have to go through it all over again.
Its like the driver just doesn't work anymore, even though I have tried "re-updating" it to the one that I downloaded here, unlike the real Roms this one just won't go throguh and wait for the 3 colored screen to come up, just freezes before.