ROAMING while not ROAMING - HTC Startrek

Hi to everyone,
it happened something strange to me since I first switched on my SmartFlip:
while being in my country and using a local operator SIM, as soon as I switched on my phone, the ROAMING icon appeared and I was not able to let it go (it is present even while using GPRS connection as a G and a filled triangle).
Yesterday I had to move to another city (our Capital City, ROME) and when I switched it on again after the flight, the roaming icon was gone, even during GPRS connection.
I thought I somehow solved my problem, but after switching it on again after the flight back, it appeared again and is still present.
I've contacted my operator, but they say it has to be something within the phone (and I believe them as I've used that SIM with many other HTC phones with no problem at all).
A friend of mine which has the SmartFlip too but a different operator (TIM), has no problem at all.
Does anyone reports the same problem, or ever faced such a behaviour ?
Thank you for your help.
Ciao

ROAMING: SOLUTION FOUND (but not solved !!!)
Hi to everyone,
I don't know yet WHY this happens to me (and not to other people, for instance...), but...
Well, I reported my phone always getting to "ROAMING" while it was not.
I've found that IF I place in the phone one of my two SIMs (I have two with the same phone number, provided by my phone operator VODAFONE ITALY, which gives this as a service) and the SIM is PIN LOCKED, then, after unlocking it, the phone reports being in ROAMING.
If I just remove the PIN LOCK from the SIM, then the ROAMING ICON is not appearing anymore.
I have to switch the phone off and on again to see the results, but till now (more than 10 tries), I haven't failed one.
I've asked some friends of mine with other operator's SIMs to try the same, but they do not report the same behaviour.
Is there anyone else reporting this ? And with which operator ?
Thank you for your help.
Best regards.

I found this nice little registry tweak to remove the roaming icon (triangle) on HowardForums.
HKLM\Drivers\BuiltIn\RIL\DisableRoamingIndicator
Set 1 to disable the triangle
Set 0 to enable the triangle
I now have a square E or G icon instead

same problem
hi mix,
i have the same problem. this behaviour happens only with sims of vodafone (128), with old ones (64) no.
this happen also with qtek 8310 with the same sim vodafone 128

Hi Bostik,
I've finally found (some time ago anyway...) that this is due to the fact there is the PIN code activated on phone startup...
If you remove PIN code lock on phone startup, then the ROMAING triangle disappears...
I believe this is a O.S. fault, not within the phone itself...
Should be checked with other machines with WM5 PHONE on (but may differ due to OS different builds...).
I decided to risk removing my PIN code... (I can recognise my phone being lost within minutes usually and I can then block SIM and phone very quickly).
It's annoying, but this is our life... ;-)
Happy new year.

This occurs when swithing from 900 to 1800 networks of the same operateor, its a bug

mix said:
Hi to everyone,
I don't know yet WHY this happens to me (and not to other people, for instance...), but...
Well, I reported my phone always getting to "ROAMING" while it was not.
I've found that IF I place in the phone one of my two SIMs (I have two with the same phone number, provided by my phone operator VODAFONE ITALY, which gives this as a service) and the SIM is PIN LOCKED, then, after unlocking it, the phone reports being in ROAMING.
If I just remove the PIN LOCK from the SIM, then the ROAMING ICON is not appearing anymore.
I have to switch the phone off and on again to see the results, but till now (more than 10 tries), I haven't failed one.
I've asked some friends of mine with other operator's SIMs to try the same, but they do not report the same behaviour.
Is there anyone else reporting this ? And with which operator ?
Thank you for your help.
Best regards.
Click to expand...
Click to collapse
I have an O2 Wizard G4 not CID unlocked I cannot get my roaming Icon to dissapear due to its looking for a tower from the UK. That is from the O2 guys and the Registry Tweak has no effect for me either it automatically changes back to Dword 0 after Soft reset.

Roaming Indicator Solved for Tornado
Survivant said:
I found this nice little registry tweak to remove the roaming icon (triangle) on HowardForums.
HKLM\Drivers\BuiltIn\RIL\DisableRoamingIndicator
Set 1 to disable the triangle
Set 0 to enable the triangle
I now have a square E or G icon instead
Click to expand...
Click to collapse
Thanks Mate!!!!
Been driving T-Mobile crazy about this Roaming Icon and its gone. Worked for my T-Mobile SDAII aka HTC Tornado and following this simple instruction( http://forum.xda-developers.com/showpost.php?p=1717878&postcount=3 ) now I don't get the Roaming Warning and Outlook works fine. )

Survivant said:
I found this nice little registry tweak to remove the roaming icon (triangle) on HowardForums.
HKLM\Drivers\BuiltIn\RIL\DisableRoamingIndicator
Set 1 to disable the triangle
Set 0 to enable the triangle
I now have a square E or G icon instead
Click to expand...
Click to collapse
I tried applying this trick to my Kaiser. My provider (Telfort) got bought by another (KPN) so now all Telfort users "roam" on the KPN network. Anybody know any other tricks I could try to get rid of the roaming triangle icon? Thanks so much!!

Related

XDA in Australia

Hi there, I am wondering if it is possible for the XDA to work in Australia. I have the upgraded rom from Xda devellopers and have removed the sim lock, but it dosen't seem to pick up the Aus networks.
Any help would be great
What for device are you using? PW10A or PW10B?
Maybe it's a problem with the GSM-networks. PW10A is for 900/1800MHz and PW10B for 900/1900
Have you tried to search manual for any available services?
Stefan
How do I find out the PW10a or b info.... The other version info is as follows
ROM Version; 3.17.03 ENG
Radio Version; 4.21.00
Protocol Version ; 32s54
Sorry, found it....PW10A1
I am guessing no one has any help or info about this. what a wasted purchase.
The XDA/XDA II/XDA III (IIs) do work in Australia.
Where is your XDA from, country? What network are you trying to connect too down here?
I have been told it is from the UK. I purchased it 3rd hand so I can only go by what the previous owner has told me.
In the auto config screen, I get the options for 02 network from UK, Ireland, De and a few others.
I am wanting to connect it to an Optus network preferrably, but any would do.
I have tried Optus (plan and prepaid) and telstra plan, but no signal shows up.
Just clarifying, you have tried Optus and Telstra phone services or data services?
You verified the SIM's worked in another phone?
The sims are able to be swapped into various phones, I have a panasonic gd50, a nokia 7250 and a motorola v600, and an ericson (can't remember what model) and they all work in each other.
The sims are set up as phone service, ie: normal mobile usage, I have even tried an optus prepaid in it.
I am only wanting to use it for the phone service, gprs and net usage is not of interest as yet.
Howdy, I have the same model and it works fine on Telstra. I originally had problems with SIM lock and GID lock, but after upgrading to 2003 from lumpistefans kitchen I've had no problems with it! Good reception and minimal drop out. It's not a waste of money. The ROM i used was the O2 one and did not use the auto config, it finds it for itself and aknowledges the telstra network fine. If you go to an Optus shop they should be able to help, they also have pretty good phone help and should be able to talk you through the settings,
Good luck!
Peace,
Robert
Thanks Ryap. I am thinking that it should automatically find the network tho......is this not the case
I know on XDA II and PDA2K you can select the network or set it to Automatic. Might want to check this setting.
SETTINGS > PERSONAL TAB > PHONE > NETWORK TAB
I am thinking that it should automatically find the network tho......is this not the case
Click to expand...
Click to collapse
I think you are confusing the autoconfig of the device with the network setup for the phone.
You can cancel the autoconfig that appears at the end of a hard reset. This just gives you some quick settings for the GPRS and MMS networks - you can add these later after talking to Optus.
Once the SIM is in, you need to make sure the phone is on by switching OFF flight mode. This kicks the phone in. Then if Optus is not picked up as your default network you just go into Settings>Phone>Network and then use the Find Network button and then the Set Networks button. After that you can check the Automatic Network selection button to make the settings stay.
Flickster
Hi all, thanks for the support so far,
As of now, I can't get any network at all....still.
when i insert the sim and enable the phone it says serching, but thats about it.
I have no idea where to find the flight mode, and when I click on the phone in the settings screen, nothing happens.
I don't get any carrier name or logo come up and appear.
Cheers
Michael
On XDA II (don't have XDA) when the phone senses a service it puts four vetical bars next to the speaker/volume icon at the top of the screen. If you tap the bars it should bring up a pop-up, this is where there should be a line (link) to click on that says "Turn off flight mode". I am not sure if this is part of the original XDA though.
When you clicked on the PHONE icon under SETTINGS it didn't do anything?
At the top bar, next to the speeker, I have a tree type logo and when i tap it it says searching. When i open the phone and then click options, it freezes for about 5 maybe 7 mins and then the settings screen opens, from there it freezes and i can't select anything
Hi all.
I am greatful for you help and support up till now.
I have managed to fixmy problem.
When putting the xda devellopers rom on the pda, ther eis an option calledGSM Band in the programs list.
Well turns out it was set to 900, so i changed it to 900/1800 and rebooted the xda.
WELL HEY PRESTO, IT FOUND THE OPTUS NETWORK
So all is good and all works.
As I mentioned before I am greatful for all the support and thankyou to all who racked their brains over this.

[Q] "Restricted access changed" + "Voice call service blocked"

Hi,
I purchased a Chinese Android mobile which has the MTK6573 chipset. It is called a Star A3.
Love the phone however I regularly see the alert/error "Restricted access changed" in the status bar and the signal drops off both SIMS. If I pull down the status bar and check details it says "Voice call service blocked".
What is interesting is that it is always the Vodafone NZ SIM card even if I swap cards between SIM slots. Other SIM is 2Degrees.
I've searched the internet but there seems very little info on this subject other than to say that some HD9 users have had the same issue and have Spice Mi 350n users.
Some suggest it could be a IMEI issue but I'm not so sure.
Does anyone have any ideas?
Can provide more info on request.
Thanks in advance.
*** Additional info... I've turned off my SIM data connection which was linked to my 2Degrees SIM and now both SIMS manifest the same error. If I re-enable data on the 2Degrees SIM only the Vodafone SIM gives the error ***
I have the same issue on an IHTC HD2 bought on fastcards with the same chinese android. I don t know what the problem is. Everytime I turn the phone on there is available network, but after 5sec it gets blocked for good. I only have one SIM card and data connection doesn't work. This is freaking annoying ...
Thanks for the attention
Sounds like a slightly different issue than the one I have as my phone will reconnect and I can use it but it frequently drops off.
Perhaps turn your phone on without the SIM card in it and get your IMEI numbers.
You can google websites to check your IMEI numbers are valid. Perhaps they are not valid and your carrier blocks the phone?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Have found one other thing...
If you go into mobile network settings and change the network mode from say Auto to WCDMA only or GSM only you receive the "Restricted access changed" error notification immediately so I'm guessing it is related somehow?
It would appear the "Restricted access changed" notification appears whenever the network mode is changed from 2G to 3G either automatically or manually.
Images attached.
Occam's Razor strikes again
I had this same problem with an unlocked phone on AT&T network. Seemed to happen totally at random. It was driving me nuts, and nobody from AT&T could figure it out.
It occurred to me that the problem might be physical when the phone failed to recognize the SIM at all one time. Seems to be that the SIM card wasn't making good contact with the socket. I put a few pieces of scotch tape on the SIM card so that it fit a lot tighter and made really good contact, and I haven't had a single problem since.
(I don't know enough about it to explain why this worked for me, but I theorize that a loose or weak connection somehow fails out and introduces some kind of garbage data that the phone and/or network doesn't like, and it gets blocked as a result.)
Thanks for the post.
The problem is that between me and my friends there are about 5 of the exact same model all doing the exact same thing.
And ALWAYS when you go into network settings and change from say AUTO (WDSA/GSM) TO GSM ONLY.
Cheers
I'm curious to know if taping the SIM card so it makes better contact solves the problem for you. Does this problem happen with different SIM cards of different brands and networks or do you and all your friends have the same?
Hi again, tapping the SIM card does not appear to make any difference. I've also tried thickening the SIM card by sticking a layer of tape to it.
Seems to happen in low reception areas where the phone may lose signal and then reconnect to the network... I guess similar to how it is replicated by changing network mode.
Can you repliacate it on your phone by change the network mode? e.g. auto wcdma/gsm to gsm only
Hi i had the same version Star A3 iam frome Egypt and had the same problem i tried to put different sims from different agents but the same problem any person can tell me how to connect my android mobile with pc or from where can i get its driver
Thank you
Dr.Ahmed Hassan
I just changed my htc desire to a one S. Same Sim. It keeps popping up 'preparing sim' and 'restricted access changed'. Never did this in the desire. Only the handset has changed. It's not a poorly fitting sim. You can shake, bash, etc. no effect. It'll happen quite often. Could certainly be as others state when switching from 3g to gsm etc.
It seems I spoke too soon. My phone (Blu Studio 5.3) started doing it again. I can produce the "restricted access changed" message by switching from WCDMA/GSM Auto to GSM or WCDMA only and from WCDMA to GSM or vice versa. It's something with the switchover.
I have noticed that I get Restriction Access Changed message only when 3G is turned on. I turn 3G off and the phone does not lose the network any more. Yet to figure out why it happens...
This started happening to me today and like the post above mine only after switching 3G off does the restriction go away. This is annoying but I'm about to reinstall my rom and see if that helps.
Just had the same problem on my SGS3. Only thing that fixed it was a powerdown and a battery pull. Hope it doesn't happen again.
Same problem
I have tried putting in 2 different sims. i bought a fake iphone 5 from china. it is saying no service: restricted access changed. Please help!!!
I'm getting this today with a Nexus 4 running on O2 UK. I've never seen it before on any phone and have been on O2 for years.
I sometimes can't dial out and calls in are going to answer phone. Also, texts are not getting through.
Airplane mode off/on seems to work.
The weather is appalling here today (Snow) I wonder if it is to blame.
I have contacted O2 and spoke to a guy (who knew a lot less that I did about the device/network). Anyway, a new SIM is being sent out. We'll see.
---------- Post added at 03:16 PM ---------- Previous post was at 03:06 PM ----------
Update. My wife's phone also not working (O2) although she is not getting the "Restricted access changed..." error in her notification tray.
I can confirm this is happened on my Nexus 4 also. cell reception disappears for a moment then comes back. after that all seems to be working as normal and hasn't caused any problems with me, except for the mystery and intrigue. does anyone know what causes it? I receive the notification "restricted access changed" and then when i pull down the notification bar to look at the notification, the notification is GONE ! it does not stay in there.
I'm definitely putting my Nexus 4 issue with this down to the heavy snow that day. It hasn't happened since.
New Nexus 4 here with t-mobile prepaid. Had it happen last night when I got home for the first time. It was showing 2 notifications, one for voice and one for data. When you click them, they go away. Saw them appear a couple more time through the night and this morning they were also showing.
No snow here though...

Not Registered on Network

Woke up this morning with everything working. Got out of bed and place my phone on my desk and turned on my computer. I then looked back at my phone to see i had not service. Confused, i restarted my phone to see if that worked and it didnt. I tried another sim and it didnt work either. i then put both of the sims in a iphone and it worked there. I restored the phone to stock and 2 other roms and it still isnt working. The weird part is when on stock i get signal bars even when their is no sim. When i try to dial out i get "Not Registered on Network"
Any help is great help
Wrong section, ask in the general or Q&A.
Sent from my SGH-T999 using Tapatalk 2
Thread moved to Q&A
Also found out the phone now only works on rogers or fido. Which is really weird because i regularly use it on telus and its unlocked
Sent from my GT-I9300 using xda premium
Have u just unstalled any cfw???
Sent from my GT-I9300 using Tapatalk 2
Have you checked your Settings? Still got IMEI? ([Settings] [About Phone] [Status]) Phone connected to correct Network Operator? Access Point Names has correct data in it? [Settings] [More Settings] [Mobile Neworks]
Thanks for the responses. I had a rom running on it for a little bit over a week and didnt make any changes since. I also do have an Imei and an apn
Journyman16 said:
Have you checked your Settings? Still got IMEI? ([Settings] [About Phone] [Status]) Phone connected to correct Network Operator? Access Point Names has correct data in it? [Settings] [More Settings] [Mobile Neworks]
Click to expand...
Click to collapse
It doesnt even show my network operator, thats the weird part it only shows rogers and when i put a sim in for fido (Rogers>Fido) i got service but no h+ even with the correct apn i only got edge
My Network operator doesn't show as a normal either - I do a Search and get (after a wait) Telstra, Optus and Voda - choose Telstra and it pops up a 'Registered on Network' msg.
Journyman16 said:
My Network operator doesn't show as a normal either - I do a Search and get (after a wait) Telstra, Optus and Voda - choose Telstra and it pops up a 'Registered on Network' msg.
Click to expand...
Click to collapse
yeah when i search i only get rogers???? This is the single most awkward thing ive ever seen
EDITTZ Found the problem. The phone switched itself to only look for one band not all. +_+ dont know how it got their and how it pertained through all the wipes but got it working DDDDDDDD
i had the same very exact problem..and yes when its in auto mode it only detects gsm signal so the data is slow signal is E.
i usually use the wcdma only option so that the phone on searches for 3g h and h+ but now when i select that option it only gives me
not registered on network..and no data signal at all.. and also the weird thing is that there is a signal bar on it plus when i scan for
network it searches the other two carrier brand on our country not the sims own carrier. help anyone
ronaldjanr13 said:
i had the same very exact problem..and yes when its in auto mode it only detects gsm signal so the data is slow signal is E.
i usually use the wcdma only option so that the phone on searches for 3g h and h+ but now when i select that option it only gives me
not registered on network..and no data signal at all.. and also the weird thing is that there is a signal bar on it plus when i scan for
network it searches the other two carrier brand on our country not the sims own carrier. help anyone
Click to expand...
Click to collapse
same problem here.. what i did is.. i change the mobile network to other provider.. on my case. im using Globe, i switch to smart.. fixed my problem.. but unfortunately.. im forced to change my service provider :\
xTristinx said:
yeah when i search i only get rogers???? This is the single most awkward thing ive ever seen
EDITTZ Found the problem. The phone switched itself to only look for one band not all. +_+ dont know how it got their and how it pertained through all the wipes but got it working DDDDDDDD
Click to expand...
Click to collapse
Hey xTristinx, glad you got your phone working.
I have the same problem on my Galaxy S, my SIM wouldn't register a network on it but it worked on a different phone. My Galaxy S still gets a signal but always says "out of service". I think this might be a problem because my friend used his SIM card in my phone and it f***** up the bands. Could you give me any suggestions on how you fixed your problem?
Thank you.

[Q] Only data network available - no calling/texts

I picked up an unlocked TMo One in New York last week. I used it there with my Norwegian SIM with no problems.
Back home, I get "No Service" using the exact same SIM-card. Using the *#*#INFO#*#*-menu, I can see the SIM-card is recognised because it displays my carrier in the "Current Network" field. I am suspecting the TMo-infused Sense OS to reject my card, since to my understanding the phone is compatible with EU networks. Will i be fine if i flash another ROM, like the stock GPe, and get rid of the TMo-stuff altogheter, or is there another rock in the road here?
I used my Tmobile HTC One with the stock ROM in Norway using a Telenor SIM and in Greece using a Vodafone SIM.
I would make sure you have the proper APN info (I can't remember the appropriate one for the Norwegian carriers). I believe it should work without issues (mine did). If it worked with that SIM card already, it's not locked and it's not rejecting it.
Also, I found that when I returned home to the US, I had to choose Settings -> Mobile Data -> Network Operators and choose Select Automatically (even though it was already chosen). Maybe you need to do that too.
Currently I am running Android Revolution and that also works fine with my Norwegian and TMOUS SIM cards.
Good luck!
Thanks! I've at least made some progress. I tried setting Network Selection to automatic, and got reception, however only for about half a minute. I then tried adding my provider's APN info. This has given me permanent data connection, but still no GSM reception for texts and phone calls. I do get 2g data when in low coverage areas. I am finding this weird. Can anyone shed some light?
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
laberkis said:
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
Click to expand...
Click to collapse
Have you tried taking the phone to your provider? Maybe you need an update which or setting which they can provide.
I find it strange that it wouldn't recognize your phone number, usually that's a sign of some type of incompatibility with the phone and the network.
Sent from my HTC One using Tapatalk 2
I have contacted my provider to see if there's anything they can do. But they're playing a little hard to get.. I was afraid there would be an issue with compatibility at first, by since my data connection is all right, I'm not so sure. Also erdelyt above here says he has used the TMo phone in Norway without trouble. He has another provider, however. They run their own network, so I will be trying with one of their SIM cards next, if my provider NetCom aren't of any help. Thanks for your help so far. I'll be posting my findings further!
So, I got to try a Telenor SIM card the other day, and the issue is still there. Although, with that card the phone number was read and displayed in the phone info menu. The owner of the card suggested there was an unlock issue - but I did make calls with my phone and SIM card in the US, so I don't see how that could be.
So that's a small step further, but now I just have to wait to see what my carrier says..
I changed the title for this thread after my findings.. I got a new SIM-card for my carrier, and i got coverage to make one phone call, but after i hung up, it was gone. I am really in the dark here.. It can of course be a hardware fault, but that's a bit strange for an entirely new product..

need some help troubleshooting network issue

Hi
I bought a second hand Sony Xperia M4 Aqua E2303 and I'm having trouble making and receiving calls. I'm hoping someone can shed some light on what may be the problem.
The phone recognises each of the different sims ive tried (showing the network name in the top info bar) but none of them are able to make calls, the call just times out and ends without any dial tones.
The signal strength is always very low for each network so I wondered if there was a hardware issue with the antenna. While searching for some information I ended up on the Service Menu > Sim Lock screen. As each of the sims I've tried have been recognised, I assumed the phone was unlocked. However, the SIM Lock screen details are confusing me. This is what is displayed -
[X] Network: 0
[X] Network Subset: 0
[X] Service provider: 0
[X] Corporate: 0
]X] SIM: 0
From what I've read so far, when an "X" is next to either Network or Service provider, along with a number, the phone is locked with a certain amount of tries left to unlock it with a network unlock code. If Network or Service provider is marked with an "X" and has a "0" after it, the phone is hardlocked to a network.
What is confusing me is that every sim I've tried in the phone has not asked for any network codes, so again I am assuming the phone is already unlocked to all networks, but why is every line of the above info marked with an "X" and a "0"? Every screenshot I've seen of the SIM lock screen only shows an "X" next to Network, but why does every line of my phone show an "X"?
Thanks for any info you can provide.
It could be that the phone u bought was a defective one. But I will try to do some more research into that issue as it a unique issue and I never experienced this.
Update:- It might be locked to a carrier of some sort or it just could be some antenna cable inside the smartphone just came plugged off or its just some software bug.
Also have you tried resetting your phone like wiping the data completely from your Xperia? If not try that or you have reset it but its still showing that issue, well I cant help much after because I have ran out of what could go wrong on your device.

Categories

Resources