Related
When I first got my xda many months ago, whenever someone called me I would get their number displayed before I pick up. Now it just says "Unknown" and no number. This is an intermittent problem. Occassionally it works, most of the time it doesn't. I have tested this from many phones.
Has anyone else experienced this problem and what can I do about it?
Thanks in advance
Stephen
PS I am using Special edition rom 1.1 and my SP is O2 :?
If it's the same problem with other XDAs or mobiles, then it's related to your SIM or your service provider network. Call them and ask about the service CNIR (Caller Number Identification Restriction). It's a GSM network parameter for each SIM. I believe that some one has activated this service on your SIM by mistake.
Does that cause a intermittent problem? I thought it would either show caller display or not, not a bit of both or am I wrong?
Cheers
Stephen
If it's that intermittent, check in different locations ... sometimes it's a location based problem ... as a good practice, replace the SIM in all cases.
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
marinic said:
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
Click to expand...
Click to collapse
I think it is normal if you are calling someone with the call waiting feature enabled, we won't hear anything either engaged tone or ringing tone as our calls in waiting/queue mode. Only he/she will hear the beep sound stating that someone is calling.
Me too,
I'm come from Bangkok, Thailand and All Rom i ever install is at the same problem (WM5 Original, WM5 O2asia, WM6 Charteux last edition, WM6 Charteux current edition)
Problem is sometime calling, It just no any sound at all and keep showing "Dialing" and may be nothing happen (may be freeze or long wait) when press end key on screen or hangup button. But i don't sure about the reach is busy or cann't connect (Used to ask my friend that his call is busy when i'm calling, he told not) Sometime cann't reach the network, it could happen again, It's seem better when use WM6 (Can ending, not wait for long time)
Is it may be radio ROM?? Or Bug??
Thanks marinic to bringing the issue up.
All my friends using ATOM and me too is facing the problem from the very first ROM to till today the latest ROM of Jiggs.
All other devices show status Waiting while ATOM show status Dialing.
Is this a problem of DialPad or anything else.
Does anyone have any solution. Please inform....
Thanks guys for your responses.
For clarification to powerwoot, my experience so far with call waiting from other handsets like Nokia, Motorola, Sony-Ericsson is the display shows a message "Call Waiting..." and then ringing tone is played. So I come to know that other party is busy with some other conversation.
Hope I make you all understand the problem. For your information this feature worked perfectly in O2 XDA II mini with the official ROM.
Regards,
Marinic.
Bosses...
Why silent? is it very much tough for you guys? Can anybody explain the problem technically in more details??
Best regards.
yes
you are right i have the same problem
is there any way to have the user notified of the status of the party that you are calling?
ie/ if i make a call, and it will display "call waiting..." when i'm trying to reach someone on the other end...
I have a WM6 device. Thanks
This may help...
Hi,
Go to Start>Settings>Phone in Services tab set the settings for Call Waiting to Notify me.
I am not sure, but it may help cause I get status Busy... now at least.
its problem with all windows mobile....
Please people i need your help and yours knowledge... I'm really tired of not receive all sms's!
I'm a busyness man, and i for my work i need sms... So i really need your help... i have installed all the roms and all the radios on my pda... an whats up with my pda? They dont receive all the sms... I have installed batary plugin to count the sms's and i note i'm not receiving some sms's some sms's stay by the way.... But the most interessant is when i conect the pda to pc, and i conect jeyo mobile, i receive all sms's... This is really strange.... so whats is the big problem? Please, can you help-me please? :/ Any software to resolve this? :/ I really apreciate your help!
P4k1t0 said:
Please people i need your help and yours knowledge... I'm really tired of not receive all sms's!
I'm a busyness man, and i for my work i need sms... So i really need your help... i have installed all the roms and all the radios on my pda... an whats up with my pda? They dont receive all the sms... I have installed batary plugin to count the sms's and i note i'm not receiving some sms's some sms's stay by the way.... But the most interessant is when i conect the pda to pc, and i conect jeyo mobile, i receive all sms's... This is really strange.... so whats is the big problem? Please, can you help-me please? :/ Any software to resolve this? :/ I really apreciate your help!
Click to expand...
Click to collapse
Dear P4k1t0
in order to be helped by the power in this forum.... you need to make precise pin-outs,
1. Which rom are you using?
2. make a manual hard reset after fresh wm6 upgrade already?
3. same situation when the Prophet is being newly use?( no 3rd party softwares)
4. radio rom version?
5. where are you?
In my own opinion, check your softwares and contact your TSP (Teleservice Service
Provider),
Actually, I am currently using Korand 3.1 with no problem at all, and many of the rest WM6
roms here I had tried and never like that before ( twice serious delay in receiving SMS and
had been proved that the mistake from the Teleservice-Provider.)
Good Luck and enjoy the warmth here... ^_^
Do you have that issue with tiagofa PT Qtek rom?
Hi first of all thnks for your replay
1. I'm using micro v2 Edited by myself!
2. Yes i have do it.
3. Yes... I have tried with some apps on... and with all apps off. With a hard reset to, and i have not receveing sms's
4. Radio .69.
5. i´m from portugal
So, did you think if i use korand 3.1 is better for that? I will try it
dioxda2 said:
Dear P4k1t0
in order to be helped by the power in this forum.... you need to make precise pin-outs,
1. Which rom are you using?
2. make a manual hard reset after fresh wm6 upgrade already?
3. same situation when the Prophet is being newly use?( no 3rd party softwares)
4. radio rom version?
5. where are you?
In my own opinion, check your softwares and contact your TSP (Teleservice Service
Provider),
Actually, I am currently using Korand 3.1 with no problem at all, and many of the rest WM6
roms here I had tried and never like that before ( twice serious delay in receiving SMS and
had been proved that the mistake from the Teleservice-Provider.)
Good Luck and enjoy the warmth here... ^_^
Click to expand...
Click to collapse
kram3r said:
Do you have that issue with tiagofa PT Qtek rom?
Click to expand...
Click to collapse
yes, i have tried the official pt qtek rom :/ But with no diference in sms's
Hi,
Your problem sounds more like a possible network issue rather than anything to do with your pda. Can you try your sim in an ordinary gsm handset, nokia, sony ericsson etc just for a few hours to see if it improves your service?
Check with your servoce provider and they can check the BTS in your area.
Hope this helps
Rivendell63 said:
Hi,
Your problem sounds more like a possible network issue rather than anything to do with your pda. Can you try your sim in an ordinary gsm handset, nokia, sony ericsson etc just for a few hours to see if it improves your service?
Check with your servoce provider and they can check the BTS in your area.
Hope this helps
Click to expand...
Click to collapse
Some days ago... i have tried this sim card on a nokia, for a day, and i have received all the sms's :/ So what did you think are hapening here? :/
And i think the problem is on the phone, because when is conected to pc, to jeyo mobile, i receive all the sms's! :/ ????
Do you get the text message if you send one to yourself ?
Are you still getting voice calls thru without problem ?
When you send a text does this prompt the downloading of any sitting on the network ?
Is you PDA set for manual network selection or automatic ...? If auto, then change to manual.
Do you stay within the same area or do you travel around (30K radius) during the day ?
Is Jeyo Mobile your service provider ? What network do you use normally ?
Rivendell63 said:
Do you get the text message if you send one to yourself ?
Are you still getting voice calls thru without problem ?
When you send a text does this prompt the downloading of any sitting on the network ?
Is you PDA set for manual network selection or automatic ...? If auto, then change to manual.
Do you stay within the same area or do you travel around (30K radius) during the day ?
Click to expand...
Click to collapse
Yes i get a text message if i sent to me!
No problem with voice calls!
'When you send a text does this prompt the downloading of any sitting on the network ?' I dont have understood that question :s
Hun... ok ok i have changed to manual Lets see if i have any diference
I do the two thinks Stay on area or travel around!
If you haven't had any texts thru for a while and you then send a text, do you then receive texts or not ?
Rivendell63 said:
If you haven't had any texts thru for a while and you then send a text, do you then receive texts or not ?
Click to expand...
Click to collapse
I have tried that, sometimes works... but not allways... like 10% :/ This is really a dificult situation :S
Did you think if i install Arcsoft MMS i will get something for this problem?
Ask your service provider to send you a sim update.
Do you have another sim card to use in your PDA ?
Rivendell63 said:
Ask your service provider to send you a sim update.
Do you have another sim card to use in your PDA ?
Click to expand...
Click to collapse
Yes i have!... What is your ideia?
Arcsoft MMS should'nt make any difference as MMS are dealt with differently by the network.
Hve you tried switching to airplane/offline mode for several minutes and then back on again? If you try this do you then get texts thru ?
Check with your service provider for downgraded transmitters in your area or where you know you'll be using the phone during the coming days
Try using a different sim in your phone and see if it gets the same problems.
Sim update from service provider should refresh settings on the phone etc.
I'm not convinced your phone is the problem as there are lots of network related issues that can delay messages being delivered thru to your phone.
Do the messages come from any particular network ?
Time of day, possible network congestion in the area. Check with your provider and ask them to check the coverage for you.
Rivendell63 said:
Arcsoft MMS should'nt make any difference as MMS are dealt with differently by the network.
Hve you tried switching to airplane/offline mode for several minutes and then back on again? If you try this do you then get texts thru ?
Check with your service provider for downgraded transmitters in your area or where you know you'll be using the phone during the coming days
Click to expand...
Click to collapse
Hun... i dont have tried that at all! But i will try and tomorrow i will come back with some news! thanks for your time and disponibilitie And sorry my bad english! x) I'm portuguese!
don't worry bout it... you english is way way better than my portuguese ... I'll check back tomorrow evening if I get the chance.
I think, if you are businessman, you should stay with factory-software and support ... if you should get issues, like now.
Hello, I Have Just Upgrade My Rom to windows mobile 6.1 b199 from windows mobile 5 , thanks to helloworld,, but i have got a big problem, my 6828 always freeze when i make a call or receive a call,, the speaker jammed and the call ended. If that happen, i have to end the call and the phone data connection will be closed and the phone will find the network again,,it always happen if i make or receive a call longer than 30 seconds ,, help me , i can make a call anymore,, is there any solution ?? i have done a hard reset many times, but it didn't work ,,thank you
I hv the same problem with my MWG Atom Life White Limited Edition, using PDAVIET ROM WM6.1 Manilla 2D (Core 20764), already use 20924 & 20755 before...both of them always have the same problem..
If i make a call, after talking a few seconds, my phone 'hang' for a minute...
If i receive a call, my phone 'hang' for a minute...
sorry for my bad english...
any solution from Expert here Please...?
Thanks before
Somebody please help...
dody_software said:
Hello, I Have Just Upgrade My Rom to windows mobile 6.1 b199 from windows mobile 5 , thanks to helloworld,, but i have got a big problem, my 6828 always freeze when i make a call or receive a call,, the speaker jammed and the call ended. If that happen, i have to end the call and the phone data connection will be closed and the phone will find the network again,,it always happen if i make or receive a call longer than 30 seconds ,, help me , i can make a call anymore,, is there any solution ?? i have done a hard reset many times, but it didn't work ,,thank you
Click to expand...
Click to collapse
Hi dody_software,
When my radio driver 0.33, I ever encounter this problem, not only it, my data connection always bad, and need to reset to establish it. So I upgrade the radio driver to 0.34, and after that no one of that problem happened again. I suggest you to upgrade your radio driver to 0.34.
I'm having same problem. It seems the phone or maybe network problem.
Try manualy switch to 3G only on: Setting -> Phone -> Network -> Network Selection.
But in some places, I can leave it "Auto" coz I can call or receive with 3G or GSM without any problem.
Hope this could help.
Maybe somebody else could give us a better explanation.
Hi guys. I've same problem. Where can i download radio driver 0.34 and how to upgrade?
Hello guys i have problem. When people call me they say that i don't pick up the phone,but actually i don't have incoming call at that moment when they call me. I can call them or send sms but they cant. Restart helps this problem,but actually i don't know even when this bug appears to reboot the phone. i have 2.3.4 version at&t unlocked atrix. can you help me with solution? thanks in advance