Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
Related
Hi,
I did the popular mistake, tried to unlock with Universal Unlocker , thinking that this is the staff to unlock all the HTC phones.
Ok. What I have now:
NO GSM - we know that
Tried to install radio roms from here, nothing. I got the information about "Checking the information...." and it is hanging like this.
I made reser and HARD RESET aswell.
I tried to install a lot. Nothing helped.
I had radio ver. 1.05.... I remember that. I have my phone from T-Mobile from UK. I had everything nice, now I have four stripes - RED GREEN BLUE and WHITE and ther is written:
HERM300
IPL-1.01
HERM300
SPL-1.04
Can anybody help me ? I tried to download mtty.exe and put all the commands (not PASTE and it still not working.
Now is 6am in Lisbon. I was sitting all that night and I am finishing writting this post.
Help if you can, regards.
Ben
Have a look on this topic http://forum.xda-developers.com/showthread.php?t=280733
It did not help. Where I can get this Qtek rom ? Is that OK for my device ? I have VARIO II from T-Mobile.
I woul like to try instal this - DUMPED English ROM from TMobile Vario II from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
but i dont now how. There are 3 .raw files, how to put them to my phone ?
That solution didnt help: http://forum.xda-developers.com/showthread.php?t=280733
What else I can do ? I was trying with QTEK rom and a got white screen on the phone and 0% on the computer. It was hanging. I tried 5 times. Then I tried to install the Radio Rom from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
I choosed all of them. Nothing. All of them are hanging on:
Chencking the information on your device... Please wait..
Then there is a screen to update. After long time. So when I press the button is still the same info. Checking the information on your device... Please wait..
And its hanging. When I reset to bootloader again the soft telling me:
This ROM Upgrade Utility does not design for your device.
Please get probper ROM Upgrade Utility and try again!
Where can I get the radio version 1.05 for T-Mobile Vario II ???????????
Is there possibility to download from somewhere ?
Or maybe I should try other solution ?
Read "problem 5" here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Yes, I was tying point 5 few times. The problem is, I can connect through mtty.exe without any problems, but after soft reset, I am pressing POWER and OK button and going to bootloader mode again, and when I am trying to flash the extracted radio ROM (i tried all of them = 4) and there is a problem. nothing is working. I am waiting and waiting, and there is only info: Checking your device information or something like that. What can I do ? Sorry for my English guys.
Instead of flashing an extracted radio image try to flash a normal shipped rom (if possible matching your cid). Capture the process using usb monitor to see where exactly it fails and which error you get.
Where can I download
pof said:
normal shipped rom (if possible matching my cid).
Click to expand...
Click to collapse
?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Benone said:
Where can I download ?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Click to expand...
Click to collapse
No rom matching your cid is available then, use the TyTN 1.18 rom.
pof said:
No rom matching your cid is available then, use the TyTN 1.18 rom.
Click to expand...
Click to collapse
I tried that ROM 2 times, once I plugged with holding camera button and second time without. I made monitor of QTEK rom aswell, because its the one which is changing phone screen from red green blue stripes to completly white. But nothing else is doin...
A attaching logs in zip file below. I have 3 files from each session, I dont know which are correct, 2 of them i saved and 1 is exported.
What do you think ?
I used USB-monitor from http://www.hhdsoftware.com/
very weird... usb seems not working but for what you say bootloader seems to be ok. Are you sure this was after patching the radio with universal unlocker? it seems totally a different problem :-$
I guess you'll have to wait until t-mob releases a ROM matching your CID and then flash it using the hermimg.nbh sd-card flashing method.
You can also try to connect to it via serial, I have no experience on that, but a search on these forums might tell you how...
keep us updated
How long I have to wait ?
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Do I really have no chances to repair it by myself ?
Benone said:
How long I have to wait ?
Click to expand...
Click to collapse
Until t-mobile releases a rom with your cid... it can be today or next year, I don't know.
Benone said:
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Click to expand...
Click to collapse
I don't think you lost the warranty. They usually charge about 100 eur for flashing it back in the service centre. They do it by inserting a diagnostics sd card, but we don't have it for the Hermes
Benone said:
Do I really have no chances to repair it by myself ?
Click to expand...
Click to collapse
You can try flashing over serial port, and you can try sd-card flashing, but for sd-card flashing you need a rom matching your CID first.
Eureka!!!
Finally I made my device working again!
And I dont have simlock !
After trying everything.... ufffff.
THX !!!!!!
1) I downloaded ftp://xda:[email protected]/Hermes/Tools_and_Programs/HTC_Hermes_SIM_Unlock_v1.zip
2) Reset my phone in bootloader mode.
3) Plug USB cable.
4) Run HTC_Hermes_SIM_Unlock_v1.
5) After 20 min. my phone said ELO to meeeee He did not have simlock when was saying that.
YE YE YE
That was simple. If you have any Hermes radio problem, try that first - HTC_Hermes_SIM_Unlock_v1.
Will be more often here, forum seems to be really interesting.
YO!
Yipie
Glad it worked
dial panel still have some problem
cann't install the third panel,for explam,htc dial
ha,all people can report this rom bug in this Thread
thanx
good job
mun_rus
3rd party Touch Dialer acts the same as it did in WM5,but I installed most of the WM6 HTC apps and they work fine. No PocketMSN,though. Send/receive through activesync is slow and problematic.
3rd dialer also has problem in mine. and the internet sharing also do not work,
it seems to have conflict with the activesync, the two can not work at the same time
Windows Live Messenger Won't Connect
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Mobem CE-Star Problem
another problem in Asia here, i manage to install mobem CE-Star (Chinese IME) on it, but after restart, the touch screen not responding, hardware button not working, but device not hang, still receive incoming call, but no way to answer it...
Could not install certificate
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
riddhwaj619 said:
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=363226
See here all the steps are expained
Strangely I'm unable to install some programs [like Kaspersky, Pocket Mechanic, etc] that were earlier working with WM5 !
shahkh said:
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
Click to expand...
Click to collapse
Device has no root certificates installed & I cannot add any.
As such I cannot sync with my Company Exchange server which requires SSL.
transcriber
transcriber is missing
and often (most of the times) ... when i open anything where u have to type something (eg. sms) then the keyboard soes open automatically.
otherwise its justt perfect!!!
(any idea how do i get my smses in a thread>>>>
thx
Audio booster
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
pankaj4u said:
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
Click to expand...
Click to collapse
I used the booster with TCMP to play flv files. Worked fine.
Unable to use USB sync
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Issue resolved
cooldnkid said:
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Click to expand...
Click to collapse
Dont bother answering. Had to change the settings in activesync on my mobile device...
GPRS
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
GPRS/EDGE Working in MUN_RUS WM6 Rom
^^rac said:
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
Click to expand...
Click to collapse
Yes its work. I am using it now.
Can't record phone call with notes or audio recorder
I've upgraded to wm6 and i've tried to record the phone call but the only voice i hear is mine. In the recording i can hear the other persons voice, but it is so low that i think it's the microphone picking up the sound from the earpiece.
I never tried it to record with wm5, so i don't know if this is specific to wm6 or not.
can anyone confirm?
rexypow said:
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Click to expand...
Click to collapse
Same problem here... any help?
best keyboard ever
For all the key board problems... here is the best key board which you can get in the windows environment..! works amazing with gene!
here is the link to down load
http://www.freewarepocketpc.net/s.php?querywords=touchpal
there are two versions, beginers try version 1.0 . It might find a little wierd at the begining but bileve me its amazing.! i am using it since 4 months..
Dont forget to watch the video in the link , it shows how to use it.
Enjoyyyyyyyyyyyyyyyyyy
Hello everybody.
I have some questions regarding my new Niki.
1.: What is the difference between HardSPL 1.16 and HArdSPL 1.15-mfg ?
One of the developers recommendet hardspl 1.15-mfg, but i wasn't able to install it. It installed hardspl 1.16 earlier and just ran the 1.15-mfg exe later. It flashed OK but when flashing radio afterwards, the screen still said "HArdSPL 1.16". PLease enlighten me.
2.: Has anybody ever tried to build an 20 key hardware keyboard to a 16 key niki ? i have my niki from t-mobile and i dont need the f*cking wnw and email key
3.: Can I go online over BT ? (I know, no customizing questions sry.)
Thanks in advance for you help
Best regards, Paul
1. the hardspl 1.16 is the oldest and the first hardspl. the 1.15mfg have special commands for futur development and enhanced hacks, like SIM Unlock.
For normal OS flashing ... you dont need 1.15mfg!
your error is ... you havent read the thread carefully ... to over write a hardspl, you need start a sspl first and then you can overwrite it. hardspl is protected ... this is why you cant easy flash a new over it :->
2. try it ... i think it works ... tell use you experience!
3. what you mean? online with what? laptop? yes ... its possible!
NetrunnerAT said:
2. try it ... i think it works ... tell use you experience!
Click to expand...
Click to collapse
Do I have to make anys Software modification ?
Or does the Niki recognize the hardware Keyboard model and changes the Layout automatically ?
NetrunnerAT said:
3. what you mean? online with what? laptop? yes ... its possible!
Click to expand...
Click to collapse
No, the other way around . GPRS and UMTS is ridiculously expensive with my provider. But I got it to work by configuring BT ActiveSync. Unfortunately, it has to be initiated by Hand on the phone every time.
Does anyone know a software solution for automatic ActiveSync over BT (like with the cable).
Is there a program that disables BT radio when the phone is in standby (display off radio on)?
1. he regonize the right kayboard and start the right drivers ... try it!
3. if you are in the activ sync mode ... all ip transfer runs over your PC ... buy a other dataplan from you provider!
NetrunnerAT said:
1. he regonize the right kayboard and start the right drivers ... try it!
3. if you are in the activ sync mode ... all ip transfer runs over your PC ... buy a other dataplan from you provider!
Click to expand...
Click to collapse
1. just ordered the Keyboard, i'll keep you up-to-date .
3. Thats exactly what i want ... IE synch up all my RSS Feeds / ActiveSync and Stuff while I'm at Home.
But I'd like to have BT all the way enabled so that I don't have to remember starting BT and starting ActiveSync everytime i come home.
I think I will try to implement sth like:
- Once an hour, startup BT
- and scan for devices
- if my Home PC is found, start Active Sync Connection
- after 2 Minutes, kill BT Connection
I think with this scheme the battery will go a long way AND I can just put the device somewhere near my Home in the evening and pick it up fully synchronised in the morning :-D.
I'm a software developer and when all the Interfaces are accessible with .NET Compact Framework and I don't find a solution on the internet, i will write it myself.
Any input on this topic would be highly appreciated (or get the Niki to talk WiFi (-: ).
best regards
Paul
you need to change the power profile of your bt connection. its a registry tweak! what settings you need ... i dont know :-> but i think ... easy to find!
Hi.
I tried to find this on the forum and wiki, but i couldn't, so i want to ask.
I got a used Softbank X01HT, and seller said it was unlocked, but when i put in my sim i can do things for about 30 seconds, and then there comes a U-SIM screen and it asks me to enter something, i guess ( It's in japanese ).
How can i get this to go away? Is it even unlocked?
ROM: 1.33.761.4
Radio: 1.16.00.00
When i make call to phone i does to through and people can all even though U-SIM screen is there, and when people call, it is possible to go to the menues and such.. But when they hang up it goes back to U-SIM screen.
Please help
I have already read the Post april X01HT thread, though it is not relevant in this case because this is model from 2006.
Thank you
this is SIM unlocked phone (radio version 1.16.00), but your Windows Mobile ROM is the original SoftBank Japanese version that enforces USIM message...
You can flash to some other Windows Mobile ROM, but make sure you check Hard-SPL thread first (sticky in Hermes upgrading etc)
Hi thank you again!
I read something like that in the SIM unlock thread.
So i just need to install Hard-SPL and then flash a ROM?
Do i also need to do CID unlock? (http://forum.xda-developers.com/showthread.php?t=293665)
I would like to be able to write japanese with the phone, so is that possible if i flash? I saw a thread about installing japanese input/output support, is that possible to install on every rom?
And can you reccomend a rom or post link to ROM you think i should install?
THANK YOU! can't wait to start using it.
Now i just tried the Hard-SPL thing. But i get Update error 260 saying my device is not connected. I have ActiveSync 4.5 open and i have synced..
so i don't know.
I don't know if it has anything to do with the USIM screen being on all the time?
I see Active sync closing down as soon as it starts updating.. but then it can't update, right?
easiest way is to use SoftBank SIM for flashing everything, that way you avoid USIM message...
if you dont have SoftBank SIM available, search for welcome.exe on this forum.
SoftBank put a software SimLock in the ROM which can be removed with welcome.exe from imei-check unlocker. (http://www.imei-check.co.uk/m3100unlock.php) Start it up with you phone connected to USB and ActiveSync enabled... After the program asks for some password file, just close it! (close dos prompt window)
About Japanese IME (kanji & kanna input), i prefer flashing some newer English WM6 ROM + installing separate Japanese IME from cab. Old SoftBank's ROM is very slow and limited...
Super CID is just there if you flash HardSPL....
HI, thank you!
I found out that the USIM screen goes away if you just press on the signal bar and say that you don't want to receive signal.. den i can ue it.. And then i could do the Hard-SPL which i did with no problem. thank you!
Ah so if i just download that program and close it down at that time the USIM screen with never come again?
Yea i want to flash it to newer. But i'm not sure which one because i've heard a lot of people broken their phone :/
could to give me a link to a few "good" English WM6 ones?, though i there is probablt many.
i will try out the imei-check thing now ^_^!
Once you flash HardSPL; when you want to flash only Windows Mobile ROM only you dont have to worry about bricking (destroying) your phone. Only flashing different radio could be dangerous.
For the version, you have to find out yourself, there are so many... Check Hermes Mobile 6 threads, there are even some special Japanese cooked ROMs if i remember correctly. Also check user signatures for what versions are different people using...
thanks so much! i managed to get the USIM screen gone with your help.
Ahh i see, but install new version wont it also change the radio? wasn't that dangerous?(sorry if i ask dumb question)
so if i chose this for example: http://forum.xda-developers.com/showthread.php?t=359458 i can still make it with Japanese IME?
i think i will try hehe!
that link you provided is Schap's WM6 Pro 4.31 ROM... It is one of the most stable out in the wild, and it comes without radio, so flashing that one should be safe.
Oh ok thank you! then i will try this.
Last question before i do anything
This that ROM it is still possible to do the Japanese IME thing?
I found this thread
http://forum.xda-developers.com/showthread.php?t=298919
It explains something of getting japanese on phone, was this what you meant by japanese IME? or is there an other method, if yes, please telle me/ give link.
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
THANK YOU!
That solution you mention should work fine, but newer solution is available. Check http://forum.xda-developers.com/showthread.php?t=445550
Hi! THank you very much! i was finally able to flash the ROM!!
And i have installed the Japanese fonts and Input thing!
It works. but after install i can not sign onto MSN Live Messenger. Is there anyway to fix this problem?Maybe i should change something in Regedit?? Or should i uninstall the fonts again? :/
It gives me this message: There's a Connectivity problem. Make sure you're in an area with good reception and try again.
I have tried over and over and WIFI is up and working..
So any answer i would be so greatful and finally be able to use the phone like i dreamed of !
Thank you.
sorry, i dont use msn, i have no clue about it...
明けましておめでとう。
Ok thank you anyway!!
明けましておめでとう〜
良い年でありますように♪o(^-^)o
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Sim0cYz said:
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Click to expand...
Click to collapse
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Hakim Rahman said:
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Click to expand...
Click to collapse
hey thanks! I'm trying this way. will let you know
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Sim0cYz said:
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Click to expand...
Click to collapse
You should first understand the instructions and tried to install WMDC for Windows Vista 64bit on your own computer! WMDC can you get on http://www.microsoft.com/download/en/details.aspx?id=3182
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Sim0cYz said:
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Click to expand...
Click to collapse
Ok, seems to work on WinXP @ VBox, but now I got stuck at two first lines
=== Niki SuperCID and Security Unlocker (c)2008) by jockyw2001
=== Donations happily accepted, paypal to [email protected]
but the tool won't continue doing his job..
I have the same problem: I have followed all the steps (Security Unlock, ROM isntallations, RADIO installations) but still no service (and with a Nokia I have full signal).
Ok, the problem was that I had installed HardSPL 1.22 instead of 1.15.
I flashed an official ROM, flashed HardSPL 1.15, flashed the suggested radio (1.58.21.23).
After that I ran the SuperCID, on my VirtualBox Windows XP based, disabled usb connection in ActiveSync, then it worked in a second. Nice! At the boot now I get "Security Unlocked".
Now I flashed the radio "RUU Nike Radio 1.58.21.23S Modded"
Going to insert my sim and check out
Ok, the Connection Setup installed the vodafone IT config, trying to reboot now..
Always the same.No Service.
If I try to press "Find Network", it takes very very long, after that I get "No Service"..
if I choose Network Selection "Manual", it can't retrieve the list of networks, says:
Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again.
Same if I try "Set Networks".
What can I do?
Tried another Radio,
1.58.21.23S Modded
1.64.08.21K
1.71.09.01K
Are not working for me.
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Thx @Rataplan, indeed I have HD2. This is my wife's phone (she replaced her BB with this one). I tried also an original ROM, but doesn't work. The thing is that in my house I don't have signal, but outside is ok; so this means that the antenna is a little bit weaker than others.
Rataplan said:
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Click to expand...
Click to collapse
OK, i'm trying the ITA rom (i'm from italy). Will let you know for sure.
tried. it's not working..
Sim0cYz said:
tried. it's not working..
Click to expand...
Click to collapse
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Rataplan said:
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Click to expand...
Click to collapse
Thanks for your help, do you know how could i fix it?
Sim0cYz said:
Thanks for your help, do you know how could i fix it?
Click to expand...
Click to collapse
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Rataplan said:
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Click to expand...
Click to collapse
hey thanks, u're a PRO! let me see!