Which Chip? - G4

Does anybody know what the model number for the DiskOnChip in the G4 wizard is please?
Riptos

riptos said:
Does anybody know what the model number for the DiskOnChip in the G4 wizard is please?
Riptos
Click to expand...
Click to collapse
Search is your friend...
http://forum.xda-developers.com/search.php?searchid=421354
http://www.google.com/search?num=30...chip+g4+site:http://forum.xda-developers.com/
--M

Many thanks, as i suspected its alot more different to the G3 chip hence the unlocking problems.
Riptos

Now i just need the source for pdocwrite and we can see what is going wrong...
Riptos

Related

HTC Hermes with SPL 2.06. 0001

How can i unlock this phone?
With what one software?
I think i have to downgroad SPL, but how?
Thx in advance!
BR!
More information :
IPL 2.06.0001
SPL 2.06.0001
GSM 02.19.21
OS 2.6.2.28
Try this
http://forum.xda-developers.com/showthread.php?t=284401
Are you sure it's a HTC TYTN Hermes?
Never heard 2.06 bootloader
umm, that sounds like the wizard with a G4 chip... and good luck on that one... you should go hit the wizard boards
lpapp said:
How can i unlock this phone?
With what one software?
I think i have to downgroad SPL, but how?
Thx in advance!
BR!
Click to expand...
Click to collapse
i think it's T-Mobile MDA Compact II
its definitely a wizard with a G4 chip... you need to go to the wizard board for G4's
http://forum.xda-developers.com/forumdisplay.php?f=343

G4 downgrade to G3

Hy everyone...tomorrow i will have a qtek s200...but i don't know if it is G4 or G3...i saw that for G3 exists app for unlock...but for G4 does exist? and if not, can i downgrade the G4 to G3 for unlocking? or does exist another solution? thx a lot...
ady_uaic said:
Hy everyone...tomorrow i will have a qtek s200...but i don't know if it is G4 or G3...i saw that for G3 exists app for unlock...but for G4 does exist? and if not, can i downgrade the G4 to G3 for unlocking? or does exist another solution? thx a lot...
Click to expand...
Click to collapse
Firstly what kind of unlock are you talking about. SIM-unlock is possible for G4 and G3. Use Lokiwiz, (search for it)
If you're thinking about CID-unlock, for G4 the only solution is to pay for it. (as far as i know) www.imei-check.co.uk can provide the unlock, but you'll have to pay. Quite a lot, actually.
Downgrading from g4 to g3 is not possible, since it's hardware. That is also the reason you have to be REAL careful. Read a lot before trying to do something you're not sure about. (It's a lesson i learned the hard way.)
up
ok...I understood what you have said to me...i was talking about operator unlocking...for example, if it is from vodafone spanish, and i want to use it on orange romania, with Lokiwiz I can do it?...cid unlock for what does help?
G3 or G4
i have the qtek s200 in my hand...and the spl is something like this: 1.09.00.01 - it is G4?
G3 or G4
i have the qtek s200 in my hand...and the spl is something like this: 1.09.00.01 - it is G4?
and it is in spanish...I can make it in english?
Beerend said:
Firstly what kind of unlock are you talking about. SIM-unlock is possible for G4 and G3. Use Lokiwiz, (search for it)
If you're thinking about CID-unlock, for G4 the only solution is to pay for it. (as far as i know) www.imei-check.co.uk can provide the unlock, but you'll have to pay. Quite a lot, actually.
Click to expand...
Click to collapse
As far as I understand your link, they provide only SIM/Network unlock, not the CID-unlock. Or may be one schould write them and ask about it?
No... Those guys at imei-check.com have the solution to unlock CID of G4, but you'll have to pay for it...
EDIT: Hey... This is my 100th Post at this forum!!
If people would read the Wiki, all the answer are in there.
as said before, you can't downgrade a G4 to a G3, its hardware.
the .co.uk website, will unlock all both the sim and the CID for both G3 and G4, however you have to pay for it, you can simunlock a G4 for free, info is in the wiki, a free CID unlock for the G4 is not available (yet, people are working on it)
ady_uaic said:
i have the qtek s200 in my hand...and the spl is something like this: 1.09.00.01 - it is G4?
and it is in spanish...I can make it in english?
Click to expand...
Click to collapse
Just to remind one more time, if your SPL version finishes with 0001 IT IS A HARD HEADED G4 and if it finishes with 0000 IT IS A BEAUTIFUL LOVELY G3.
up
i understood that, but i'm curious if i can make it in english...when does apear for him cid-unlock for free?
You have to wait for free cid-unlock (for ever?)
My opinion is that free G4 cid-unlock will never come.
Because G4 is used since several months and if nothing came so far, thus the chances get lower and lower every day (source: a probability theory)!!
I suggest you take the solution mentioned above and pay for it.
up
ok...but, tell me exactly what does this CID-unlock do? for what i can use it? i just want to change the rom in english...i can't? without that cid-unlock?
alright just a quick check after cid unlock you can flash whatever you want right? even if I just wanted to flash a rom of totally different device it would do it my phone would be bricked afterwards but it would do it right?
I also could downgrade ipl/spl. Does anybody know if the prophet unlocker would work with a wizard bootloader on a prophet?
38 $ is not to much if your phone is bricked I think...^^
i-meicheck is unlock CID or use JAFWM to path CID
can jafwm also unlock cid?
no man. JAFWM can path check CID, not crack CID
Can anyone help me
My SPV M600 is in bootloader with IPL 2.10.0001 and SPL 2.G3
How to update ? how to repair it
Jesterz said:
If people would read the Wiki, all the answer are in there.
as said before, you can't downgrade a G4 to a G3, its hardware.
the .co.uk website, will unlock all both the sim and the CID for both G3 and G4, however you have to pay for it, you can simunlock a G4 for free, info is in the wiki, a free CID unlock for the G4 is not available (yet, people are working on it)
Click to expand...
Click to collapse
still no news? I need to unlock cid of a G4 S200 and it's impossible to me to find any solution...thanks anyone!
If theres a free solution itl be here quicker than the speed of light, as its not on the Wiki you can be assured theres no free ones!

htc herm200 unlock solution

modelnr:hera100
rom version 1.10.172.5NLD
Rom datum 11/13/06
radio version 02.71.90
any solution to unlock
thx in advance
Please use search and the wiki you found all you want !!
here the model
can't find any solution
!!!!
http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
You can see : How to SIM unlock the Herald not ready yet, research to be done!
i try it but always problem in upgrading rom
Free HTC Hermes SIM & CID Unlocker Available (v3a)
how to solve this problem
(have u an icq number or messanger ? )
If your snapshot is correct, you do not have a Hermes but a "Herald". Please check the correct forum but as I understand, the unlocking procedure is not yet available.
hbstun said:
i try it but always problem in upgrading rom
Free HTC Hermes SIM & CID Unlocker Available (v3a)
how to solve this problem
(have u an icq number or messanger ? )
Click to expand...
Click to collapse
YOU DONT HAVE A HERMES
YOUR DEVICE IS A HERALD
YOU CANNOT UNLOCK A HERALD YET.
mrvanx said:
YOU DONT HAVE A HERMES
YOUR DEVICE IS A HERALD
YOU CANNOT UNLOCK A HERALD YET.
Click to expand...
Click to collapse
IMEI-CHECK CAN UNLOCK THE HERALD
hbstun said:
here the model
can't find any solution
!!!!
Click to expand...
Click to collapse
oh my.....that's the hermesrald...
*sniff sniff*
I smell a tasty brick cooking up. Yum.

PLEASE HELP...I BRICK MY G4 PHONE WITH CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE

PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
What i did was to install CUSTOM__RUU_Wizard_1050412_WWE_101_11210_ NK.NBF file via soft spl method...... i repeat i know now what i have done ( installing G3´s IPL/SPL into a G4 ) but if someone has a software method for fixing this problem please HELP.....
information is your friend, post EXACTY what you did and EXACTLY what the phone is doing now.
AYALA445 said:
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
Click to expand...
Click to collapse
The CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE only has G3 IPL/SPL.
This means that if you forced the SPL OR IPL on the phone, you have bricked it.
Block sizes from a G3 are different from the blocksizes on a G4, so you won't be able to flash the correct IPL/SPL back to the phone iusing any software method.
Only method which "could" work is the still unavailable JTAG method.
But because the Omap 850 datasheets (complete datasheets, not the simple block diagram) aren't available, it's impossible to find the JTAG pins.
AYALA445 said:
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
What i did was to install CUSTOM__RUU_Wizard_1050412_WWE_101_11210_ NK.NBF file via soft spl method...... i repeat i know now what i have done ( installing G3´s IPL/SPL into a G4 ) but if someone has a software method for fixing this problem please HELP.....
Click to expand...
Click to collapse
I think you can try this if your phone still can get into bootloader mode, i got mine fixed this way hehehe.... good luck man
here is the link to my post in the forum:
http://forum.xda-developers.com/showthread.php?p=2159021#post2159021
goodluck

help with a G4 QTEK9100

I have a G4 with
IPL: 2.21.0001
SPL:2.21.0001
GSM: 02.07.10
OS:2.18.7.2
i have WM 5.1.xx and i want to upgrade the rom, i'll see TNT and SNN 3.0 but i can upgrade because the upgrade tool give me ERROR300, do you know how can upgrade? witch is the best ROM image for this phone?
And one more question, what's a G4 phone, with diferrences have from a G3 and other's
Sorry this questions, but, i'm a begginer.
Thank's
Tony
tony-coimbra said:
I have a G4 with
IPL: 2.21.0001
SPL:2.21.0001
GSM: 02.07.10
OS:2.18.7.2
i have WM 5.1.xx and i want to upgrade the rom, i'll see TNT and SNN 3.0 but i can upgrade because the upgrade tool give me ERROR300, do you know how can upgrade? witch is the best ROM image for this phone?
And one more question, what's a G4 phone, with diferrences have from a G3 and other's
Sorry this questions, but, i'm a begginer.
Thank's
Tony
Click to expand...
Click to collapse
Read and fully understand the guide posted here in the Wiki, it'll answer all your questions and procedure to upgrade a G4 device to wm6.
BTW,you can't just download any wm6 Rom and upgrade your phone with it,its first requires to do CID unlock the phone,but a G4 device cannot be CID unlocked like a G3 phone,coz it has different M-System Flash Chip type DOC Chip with altogether different IPL/SPL (Bootloaders),which are specifically made not to be easily CID unlocked like the G3 devices. This is the only difference in a G3 and G4 devices,otherwise,they are basically same as regards to specifications and features.
However,a G4 device can still be upgraded to wm6 Roms with other methods called 'HardSPL' and 'SoftSPL',check out this link or the 'Stickies' posted at the top of this thread as "hardSPL' and 'SoftSPL' for upgrading to wm6 :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
Read and fully understand the guide posted here in the Wiki, it'll answer all your questions and procedure to upgrade a G4 device to wm6.
BTW,you can't just download any wm6 Rom and upgrade your phone with it,its first requires to do CID unlock the phone,but a G4 device cannot be CID unlocked like a G3 phone,coz it has different M-System Flash Chip type DOC Chip with altogether different IPL/SPL (Bootloaders),which are specifically made not to be easily CID unlocked like the G3 devices. This is the only difference in a G3 and G4 devices,otherwise,they are basically same as regards to specifications and features.
However,a G4 device can still be upgraded to wm6 Roms with other methods called 'HardSPL' and 'SoftSPL',check out this link or the 'Stickies' posted at the top of this thread as "hardSPL' and 'SoftSPL' for upgrading to wm6 :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Click to expand...
Click to collapse
My phone is unlocked, I think, because i can insert any SIM from any provider... and it works
tony-coimbra said:
My phone is unlocked, I think, because i can insert any SIM from any provider... and it works
Click to expand...
Click to collapse
Its SIM unlocked not CID unlocked. SIM unlock is very different than CID unlock,with SIM unlock you can insert and use any SIM of any other network,but with CID unlock you can flash or upgrade to any wm6 or latest Rom. The reason you have not been able to upgrade to any of the above mentioned in your first post is coz your phone is CID locked,it won't upgrade untill its CID unlocked,ok
tony-coimbra said:
My phone is unlocked, I think, because i can insert any SIM from any provider... and it works
Click to expand...
Click to collapse
Hello once again, I red about t, and I was trying to make the procedements off the manual, but i get 2 problems:
If i try to Run HARD_SPL in the PC with XP, when Open the Dos window, the program gives Error, don't copy the files to device and windows close, i try in a different PC and the problem is the same.
When I Run in vista, pass the dos windows, and copy to device, the screen stay White, but when i make next in the update TOOL, the program crach, windows give me a messagem, program don't responding....
Can anyone help me?
try running it from Command Prompt.
starkwong said:
try running it from Command Prompt.
Click to expand...
Click to collapse
I do that test with XP or Vista?
tony-coimbra said:
I do that test with XP or Vista?
Click to expand...
Click to collapse
Win XP is recommended.
zabardast_1 said:
Win XP is recommended.
Click to expand...
Click to collapse
Hello, run from Command Prompt don't resolve the problem, when the apliccation try to copy to pda give me---> cecopy.exe -> apliccation error

Categories

Resources