Hi
I just tried the upgrade for my Orange SPV m1500 - the HimaupgradeUT.exe application that I downloaded from this site.
I'm getting an Error 100, which is supposed to mean it's not the right version for my phone.
Now the thing won't even switch on or even hard reset.
Please can someone help? If anyone's got a link to the original ROM even that would be a start
At you not Himalaya ttp://pokupki.com.ua/descr.php?id=23680
Orange SPV m1500 It not Himalaya(spv 1000 pokupki.com.ua/descr.php?id=23680) аnd HTC_Alpine (http://wiki.xda-developers.com/index.php?pagename=HTC_Alpine )...
Related
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
Hi everyone
I'm new to this message board and need some help I hope some one can help. Ok here goes I have today tried flashinng the ROM on the SPV M1000 which is the same phone as an XDAII just orange branded.. when I went to teh orange site and downloaded the rom update v3.66.1.230 and followed the instructions and got the following error message ERROR 120 : COUNTRY ID ERROR 0-0-4-4-4 and the phone / Pda is constantly stuck on and on the screen of the phone it reads Serial on the top of the screen and v1.06 at the bottom.
can anyone please tell me how to fix this problem. I'm not very technically minded when it comes to these things so instructions in laymans terms would be greatly appreciated.
Thanks to every one in advance.
[email protected]
m1000
the unit is stuck in what is known as bootloader mode.
Did download the rom that matches your contry of origin, ie uk for uk phones.
I flash these units all the time at work and dont have a problem.
You can sometimes get the phone out of bootloader by re-running the upgrade. Try downloading it again and running it.
Hi guys
I have the ROMs of an Orange c550 and Dopod 566 in the.BIN-format! How can I convert them into a .NBF-file so that I can flash them during MiniSD to my german SDA II?
I tried out the method with psdwrite to write the Image on the MiniSD via CardReader! During and after 40-50 % the phone is the meaning to show me "Checksum Error"! What's that??? How can I fix that?
[bookmarked!]
I'm very interested if you succeed!! I have been searching for rom's and ways of getting them on my own sda2 for weeks now.
Good luck and sorry i could not yet help you.
btw. A checksum error usually means that your file is corrupt and that one should try to obtain it again.
any luck on this? I have two different roms both in .bin format and would liek to know how to turn it into a nbf???
cheers
veef13
SPV C550 Rom Back
I am new to this forum. Can anyone help to copy ROM from one SPV C550 to other SPV C550?
hello I´ve recover my m3100 from a dead brick (after used of universal sim lock) to full working phone
Her is my way
1. I´ve first try flashing a windows mobil 5 rom from my qtek 2020 on the m3100 for 2-3 times
2. then I´ve flas it with the new rom from Cingular ther are using bootloader 1,06..... and IT COME BACK ALIVE....
and if you have a HTC HERMES Then you just find a rom with you phons cid her
"http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades"
BUT REMEMBER IF YOU HAVE A ORANGE M3100 YOU CAN´T FLASH OTHER ROMS
BECAUST YOU HAVE TO USED A ORANGE CID ROM AND IS´T NOT OUT YET..
Good to hear That your device Is up now Congrat's , Wht if it's possible with human being
Why u've instal qtek 2020 on this hermes ?
I´ve just wanted to try somthing after 30 days looking at a £450 brick
@kimbay:
I have some questions for you, in order to understand how you fixed it and provide a "solution" for the others:
1) About the Qtek2020 flashing:
- Did the Himalaya flashing process did anything on the hermes?
- Where did the Himalaya flashing process stopped?
- What did you see on the Hermes screen?
- What error did you see on the Himalaya upgrade utility?
- Which rom did you exactly use? (post the ftp link of it please)
2) About your M3100
- Which CID does your hermes have? If it's a M3100 from UK, i guess it is ORANG001, right?
- Which ROM, radio rom and bootloader version did you have on your device when you fixed the problem?
If there's anything else I am missing and you think can be useful, please post it too...
Yes, please fill us in because I'm sitting on a brick'd TyTN
congrads on bringing it back to life
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
Hi POF
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Then I just try the new cirguler rom.
yes my m3100 is a orange001 cid -bootloader 1,04
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
P.S. now my problem is that I can´t unlock the phone because imei-unlock do not suport bootload 1,06
regards
kim
Izzard-UK said:
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
not for the moment I´am also stuck on cingular rom
Click to expand...
Click to collapse
kimbay said:
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Click to expand...
Click to collapse
OK, but which rom did you exactly use? (post the ftp link of it please)
ftp://xda:[email protected]/Himalaya/
kimbay said:
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
Click to expand...
Click to collapse
It's ok, it was original rom from M3100... no problem, no need to upload anything.
If you have dead Hermes try to flash with Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship.exe For me - it`s work.Regards
SPV M3100 Freez
Hello
I have A SPV M3100 anyoane write same ... for unlock and new freez in "Windows mobile"
when i put in 3 color and i see:
"Herm100
IPL-1.01
Herm100
SPL-1.04"
And when is in 3 color and connect to PC ActivSync get error cannot recognize this device
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs