Code:
Rom Version 2.26.10.2 WWE
Radio Version 02.25.11
Protocol Version 4.1.13.12
IPL 2.21.0001
SPL 2.21.0001
I try out this ROM
Code:
http://forum.xda-developers.com/showthread.php?t=290155
but it show me error 300 "Invalid Update tool"
I'm searching whole Forum XDA-developer but i still can not unlock CID that's why when i use ROM WM5 AKU 3.3 it give me error 300 "Invalid Update tool"
I tried "HTC Wizard Unlocker UPDATE Version 0.2b " following this link
Code:
http://forum.xda-developers.com/showthread.php?t=249474
but the result is the same...
Please help me to unlock G4 CID then i can use this nice ROM
many thanks...
If you read around the forums you would have read that there is currently no way to unlock the CID for free. Only way is on www.imei-check.co.uk for £20. We are currently working towards a soltuion however.
Related
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Could anyone provide me with info on how to downgrade to WM5? I need to do this for warranty purposes. The guide isn't online anymore for a few months at http://www.mrvanx.org/.
I would like to downgrade my wm6.1 to wm5 or wm6 (official roms T-mobile NL).
Thanks for your help
Since the guide to downgrade is still offline, I don't know how to handle.
I have searched the forums, but everyone keeps on linking to this guide of mrvanx.
I found this thread where mrvanx provides
this link to download SPL 1.10.oli. Since I understand I will first have to flash to 1.10 olipro before flashing the factory default SPL.
After I have used this I keep on getting ERROR [260] : UPDATE ERROR
Can anyone please tell me how I should downgrade my Device?
I have WM 6.1
Radio version: 1.54.07.00
And still 2.10 olipro
thx
I stuck there now.
No guide for downgrading to WM5,
My phone is dopod 838pro, and SPL now is 2.10 olipro
Anyone can tell me where to get it?
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have read and read and I am even more confused. Your advices are appreciated.
Just got me an I-mate K-JAM with WM5.
It is both CID/SIM unlocked as reported by WST 4.2.2
IPL 2.16.0001 G4
SPL 2.16.0001 G4
Radio 2.07.10
I am using it on T-mobile.
I would like to upgrade it to WM6 or WM6.1 in as easy steps as possible.
Since it is G4 and CID unlocked, do I still need to do the SoftSPL or HardSPL on it as some guides say?
Can I just load a new ROM ? Please tell me which one(s) I should look at ? And will they keep my IPL/SPL at 2.16 ?
If I get responses to this thread great and thanks.
if it is unlocked you should be able to load it no prob hard spl will cid unlock (what you say your phone already is so you shouldn't need it).... but you will no for sure when you try and flash.... you won't be able to. as for ipl spl not sure depends on the rom you'll have to check with the developer.
IPL 2.16.0001 G4
SPL 2.16.0001 G4
A G4 device cannot be CID unlocked,you are wrong here,WST_4.2.2 will never read and confirm a G4 phone as CID unlocked.Run the WST_4.2.2 and read carefully,it'll definitely confirm it CID locked.
YES ! as G4 cannot be CID unlocked at all,however,it can only be upgraded through either 'SoftSPL' or 'HardSPL',there's no other way.
zabardast_1 said:
IPL 2.16.0001 G4
SPL 2.16.0001 G4
A G4 device cannot be CID unlocked,you are wrong here,WST_4.2.2 will never read and confirm a G4 phone as CID unlocked.Run the WST_4.2.2 and read carefully,it'll definitely confirm it CID locked.
YES ! as G4 cannot be CID unlocked at all,however,it can only be upgraded through either 'SoftSPL' or 'HardSPL',there's no other way.
Click to expand...
Click to collapse
Well this is what WST is giving me when I click on CID Actions:
Reading CID block...
Calculating CID block sum...
CID checksum: F7A6B943
Decrypted stored sum: D15C1E02238D38E4
Decrypted calcd sum: D15C1E02238D38E4
Key index : 21 - Block index: 171
CIDkey: 5kŠ” *ñ[
CID IMEI: DBB52205AB7818F
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
So !!!!
Is it locked or unlocked? Am I doing anything wrong? Is there another way ( other than flashing ) to see if it is locked or unlocked ?
Dont pay WST any attention, your phone IS NOT CID unlocked, G4 devices CAN NOT be CID unlocked, they can only be made to think that they are.
What you need to do is apply HardSPL to your phone, which will make your IPL and SPL read 2.26.0001 and 2.26.olip or something similiar(read the thread on HardSPL for the specifics), you can then upgrade to any G4 safe Windows Mobile 6 or 6.1 ROM that is availible here. I recommend using the latest TNT version(20273), as it is currently the most stable version available.
I have made a guide that is available in the G4 section that includes some screenshots and all of the neccesary programs to get you up and running. You just need to download it, and the ROM of your choice and off you go!
I hope that helps yah out some!
Can you post 'Device Info' report generated by WST_4.2.2 here.
I HAVE XO1HT SPL 1.06 what tool i can use to downgrade spl to 1.04 i see marvn'x guide but all the download site not found if any body could give me the right tool to donwgrade spl to 1.04 ineed to unlock my phone im a newbi i can read but im not familiar with the tools if anyone could guide me and give me link to what software i should use...
thanks
br martians
I dont know exactly the problems with softbank devices but as far as I understand everything you need to know to SIM unlock it is here http://forum.xda-developers.com/showthread.php?t=293665 and here http://forum.xda-developers.com/showthread.php?t=301952. Tell if is usefull.
HTC Tytn
SuperCID
SPL: 2.10.Olipro (HardSPL v7)
ROM: Shamanix WM6 Ultimate v2 Final
RADIO: 1.48.00.10
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
yes, you can
o0opaniko0o said:
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
Click to expand...
Click to collapse
hi, yes, you can flash a new rom, but first of all, read , read, read and then read again, the process is very simple once you have readed the faqs (stickies)
good luck !!!1
Thanx for your answer!
I´ve read the Wiki and the sticky´s in this forum, i´ve searcht for my IPL/SPL Build and read this topics too.
But i´m unsure.
In the past (when the Wizard was new for me) i´ve read that the IPL/SPL 3.08.0001 (AKU3) wasn´t possible to upgrade .
Now i can´t find anything about that but i´m unsure.
Then i´ve read about Soft an HardSPL Flash but what is the best for me?
I´ve read that SoftSPL was better if you have warranty on your phone but my phone havent any warranty because it´s to old.
Should i use HardSPL to permanently remove the CID lock (then i should use only G4Save Rom´s - Right?)?
So Steps i want to do now to upgrade my Wizard :
1 . G4 Hard SPl CID unlock
[Solution] G4 Hard SPL (CID unlock)
But this tutorial say´s (After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip) can the IPL 2.21.0001 boot the "old" AKU3 T-Mobile Germany Rom or must i update the rom with Mun's RUU imediatly?
2. I Update the rom with Mun's RUU after i´ve read this ROM Features, Ratings, Information and Program List topic to chose the best rom for me, G4 Safe only!?
Right or have i forgot some steps?
It´s done,
i´ve read some topics again and again und then i used the SoftSPL CID unlock and flash my wizard succesfull.
Thanx!