Ok i get 15 messages a day at least asking how to do the install, so here is the instructions and all the files that you will need for upgrading using farias rom on a g4 device
it contains the instructions, links to t-mobiles original roms, cab files for shell tool , shelltool, farias nbf file, the extended rom and the 2.611 radio rom.
Read the instructions and follow them
Please use your providers original rom to flash to first and only use this on G4 devices i included the two most common links.
I am not responsible if u screw your device i only made this available to stop all the i am frozen at the rainbow screen i ran the faria exe and screwed my device, etc this should provide a nice easy install
http://www.megaupload.com/?d=VRYOZ4GO
Thanks a lot for this post. But the instructions don't seem to open, I click the file and it opens with word and then goes to some encoding screen.
Does this happen to any of you?
ok i have redone the instructions in HTML format available here
http://www.megaupload.com/?d=Y0VDAICW
original was done in open office maybe thats why
Thanks!
works perfectly
The best instructions I've ever seen in this forum!!!
Works perfectly and flawlessly
Thanks mate
Guys
PLEASE help me
I have followed the Thread and suggesstions.
I have tried not miss any steps.
I have been flashing phones for years so am not a noobie.
I have flashed this phone quite a few times
Problem
I have a G4 ( unlocked via website)
I am stuck on bootloader when flashing this rom
I used WizardLove to get my phone back and then T-mobile US 2.26 to give me a clean system
I have changed the Radio to 2.19
I have rerun the unlocker in case I wasnt really unlocked
Is there any other suggestions to help me get past the loader?
Am at present using MB and am impressed but know that Faria always comes up with good stuff and want to do get this one my phone.
Thx
Bhayani
eddieitman said:
ok i have redone the instructions in HTML format available here
http://www.megaupload.com/?d=Y0VDAICW
original was done in open office maybe thats why
Click to expand...
Click to collapse
Kudos to you, and of course Faria and the team.
The guide works perfectly.
My advice to people thinking of trying it...
If you don't understand 100% of the guide, DO NOT attempt it.
Thanks again to all involved
Just a newbie's question,
How do we turn off the radio module?
It worked great except now my keyboard on my XDA mini s shows the wrong symbols on the middle and bottom row for a UK layout. Does anyone know a fix for this?
I have seen some regedit fixs, but they dont work for me, every time i reset the phone it reverts the settings.
It was really a nobie question?
turn on flightmode.
Hi everyone...
as my first post i must say thanks to everyone!
this forum is the best one for htc's
i have a wizard g4 running Wizard_MB_1010811_21911 or Most beautiful...
flashed using the shelltool...
sometimes the phone gets a little weird so... i want to try this faria's rom...
can someone please upload this guide to rapidshare?
i cant access megaupload here...
or just post the steps to follow...
i already have the farias rom
thank you guys!
nanow said:
can someone please upload this guide to rapidshare?
i cant access megaupload here...
Click to expand...
Click to collapse
I will grant you that wish!
http://rapidshare.com/files/22275022/G4_step_by_step_install_wm6.rar.html
It's 75mb, as is has EVERYTHING you need to get the Faria WM6 rom on your G4 Device.
eddieitman said:
ok i have redone the instructions in HTML format available here
http://www.megaupload.com/?d=Y0VDAICW
original was done in open office maybe thats why
Click to expand...
Click to collapse
Cant get the download. mind emailing to me [email protected]
churchwa said:
It worked great except now my keyboard on my XDA mini s shows the wrong symbols on the middle and bottom row for a UK layout. Does anyone know a fix for this?
I have seen some regedit fixs, but they dont work for me, every time i reset the phone it reverts the settings.
Click to expand...
Click to collapse
change the setting then wait 1 minute and hard power off the mda NOT a reset
with the button on the top as a reset clears changes a hard off will save settings
gazzrenn said:
I will grant you that wish!
http://rapidshare.com/files/22275022/G4_step_by_step_install_wm6.rar.html
It's 75mb, as is has EVERYTHING you need to get the Faria WM6 rom on your G4 Device.
Click to expand...
Click to collapse
Thanks very much man!
Thanks for the help, i managed to do the power down and it has retained the reg settings.
BUT, it still has not made the keyboard symbols work properly, they all seem to be one to the right or one to the left. Any ideas?
Am i doing the correct thing by adding the control panel settings as a dword in hex?
eddieitman said:
change the setting then wait 1 minute and hard power off the mda NOT a reset
with the button on the top as a reset clears changes a hard off will save settings
Click to expand...
Click to collapse
see this article i have to use the US settings on mine despite being uk
http://forum.xda-developers.com/showthread.php?t=280042
No Keyboard support for UK XDA's
WOW, ok so this is a big warning to all people with UK XDA Mini S's. You cannot get the keyboard to work properly with the faria rom!!
More people should be made awear of this.
churchwa said:
WOW, ok so this is a big warning to all people with UK XDA Mini S's. You cannot get the keyboard to work properly with the faria rom!!
More people should be made awear of this.
Click to expand...
Click to collapse
Or you can try using the registry wizard under settings, system and enabling the keyboard in whatever format is needed there.
depends where the kbd layout is is your @ sign on the letter d?
and # on F?
or did you do an operator config? under accesories
Here are the letters and what is prineted on the keys. I have put in brackets afterward what i am actally getting when i press the key.
a = ! (~)
s = @ (!)
d = # (@)
f = $ (#)
g = % ($)
h = & (%)
j = * (&)
k = ( (()
l = ) ())
The last 2 being correct mappings.
I have tried the operator config for O2 uk, should i try something different?
Related
Hi!
I am thinking of upgrading to a Vodafone v1605 on Monday.. and I can see lots of information about changing languages etc... but it is getting confusing for me...
Is there are concise account on how to install Japanese on a UK Vodafone V1605?
I am new to this and only have experience with Palm PDA's. I am a bit worried about editing registeries etc..
Ofiaich
search the forum
hanmin
yes,
been there, done that.. that's why I posted.
Ofiaich
Have you read this?
http://forum.xda-developers.com/showthread.php?t=282997&highlight=
What have you read?
Hi hanmin,
thanks for your reply,
" Have you read this?
http://forum.xda-developers.com/show...997&highlight= "
Yes, I have read aquasesh's thread and also the links posted within.
I think perhaps. this thread is most useful.
http://forum.xda-developers.com/showthread.php?t=281617&page=8
and I can see these links to asukal's site.
http://www.asukal.jp/WM5/LetsJapanNo5.zip
then install this
http://www.asukal.jp/WM5/BagojsINPUT.zip
I have also read this over at Brighthand
http://forum.brighthand.com/showthread.php?t=217045
Reading all of these makes the process seem quite simple, but later on in the threads people post idffierent problems. I know it is perhaps true that they did not follow the instructions to the letter.....
I have also read this thread
http://www.aximsite.com/boards/showthread.php?t=103305&pp=20
So you see, I did use the search, but was hoping to find a summary of how to install full Japanese support, like a beginers guide.
I will read these again to try to get the process into my head. And will also read these pages thoroughly
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Currently I use a Tungsten T3 PDA paired to a 802SE and can see Japanese in my email, and also reply in Japanese. But my T3 's battery only lasts an hour when out and about.
I also use a Sony Vaio VGN-TX51B which has the Japanese OS but of course, it is not always convenient to carry it around.
I know very little about the TyTn and things like re-flashing roms. and am wondering whether to buy a sim free unlocked no branding TyTn or just go for a Vodafone one as my upgrade is now due.
Thanks again for your reply,
Ofiaich
Ofiaich,
Read this one if you read Japanese. It has the step by step comprehensive instruction on how to do it.
http://www.yasukawa.com/blog/archives/000297.html
Well, from my experience, Asukal's works.
http://forum.xda-developers.com/showthread.php?t=262918&highlight=
Anyway, I personally wouldn't suggest a ROM flashing for other language support unless you very much prefer having interfaces in other languages. I had my Chinese language support from Asukal, it works wonderfully. I did a beginner's guide at the Wiki under WM5.
Anyway, I'm sure you can get your stuff working. It is difficult to judge the difficulty of a certain task based on posts as many that got the thing working won't post at all. So, the success rate may be much higher than what you thought.
Anyway, Tytn or Hermes are waaaaay out my league (I'm poor), so I can't comment on which one you ought to be getting. You can look for some other thread discussing this issue.
Anyway, if you can, once you got your thing working, do a begineer's guide at the Wiki then.
Thanks harryk1372 and hanmin!
harryk1372, I will check out the link you gave now,
hanmin,
Yes, many people who have success do not post.
I did find this page just a few minutes ago,
http://www.suninet.org/japinput/_README.TXT
and deleting the _README.TXT reveals fonts, cabs and exe files.
http://www.suninet.org/japinput/
" Anyway, if you can, once you got your thing working, do a begineer's guide at the Wiki then. "
Yes, I will do !
Thanks again !
Ofiaich
ofiaich said:
Thanks harryk1372 and hanmin!
harryk1372, I will check out the link you gave now,
hanmin,
Yes, many people who have success do not post.
I did find this page just a few minutes ago,
http://www.suninet.org/japinput/_README.TXT
and deleting the _README.TXT reveals fonts, cabs and exe files.
http://www.suninet.org/japinput/
" Anyway, if you can, once you got your thing working, do a begineer's guide at the Wiki then. "
Yes, I will do !
Thanks again !
Ofiaich
Click to expand...
Click to collapse
the rough process is as follows. i think you can find details yourself.
1) override wince.nls
2) install a japanese font
3) change font registry
4) install atok for ppc (don't reboot yet)
5) install DefSipChange to change default sip from atok to something else
6) install pqzii to map a key to start ime
the key is that atok tries to become default sip after installation. when atok is the default sip, the system just gets hung up, and all you can do is hard-reset. defsipchange detects and prevents atok from becoming default, and you can choose another sip as default. english key map does not have KANJI (ime) key. pqzii is a very useful program to map the ime start function to any key.
if you wanna save disk space, i recommend you use docomo rom.
thanks qtotter!
I got the idea but need to do more serious reading, looks daunting for a beginner !
I got a chance to buy an unbranded, unlocked TyTn, or use my Vodafone upgrade and get a V1605.
Ofiaich
qtotter said:
the rough process is as follows. i think you can find details yourself.
if you wanna save disk space, i recommend you docomo rom.
Click to expand...
Click to collapse
qtotter,
i had a problem when i was experimenting the docomo rom that you can find at the wiki site. no matter how many times i tried flashing it, it stopped exactly at 47% all the time giving me an error that there is a communication error. looks like there are many of those who succeeded flashing it though. were you able to flash it?
harryk1372 said:
qtotter,
i had a problem when i was experimenting the docomo rom that you can find at the wiki site. no matter how many times i tried flashing it, it stopped exactly at 47% all the time giving me an error that there is a communication error. looks like there are many of those who succeeded flashing it though. were you able to flash it?
Click to expand...
Click to collapse
i am using docomo rom on x01ht since it does not have a sim-monitoring process although i don't want to see docomo logo everyday. i could update the rom w/o any problems, but i did not download it from here.
try to download the file from here again or look for "Herm_China.rar" (it was named like this, originally) elsewhere on the net.
and before you update the rom, be certain that your device is fully charged, that there is no anti-virus software, no screen saver, no unnecessary software running on PC, and that there is no sim or no microsd left in the device.
if you still get the same error, simply chage the cable or try on another pc.
Hi qtotter,
thanks for your reply...
i do have "Herm_China.rar" downloaded but just thought that the one uploaded here by pof is from that and is the same thing. i too didn't want to see docomo bootsplash on x01ht and flashing it was only experimental after seeing Asukal's post on his web that he succeeded flashing it on x01ht.
i personally prefer i-mate roms and i have i-mate rom flashed on my Universal although i have changed the bootsplash by following the instructions on buzzdev.net and i don't have to see i-mate logo on a Dopod device. i now have TyTN rom flashed on my x01ht as it doesn't have any brand logos other than HTC bootsplash. I'll stick with TyTN rom until someone finds the way to cook nbh roms and the way to change bootsplash and so forth.
thanks again for your advice anyways...
change bootsplash and rom cooking will be possible soon
Hi pof,
that's fantasitic. you are the man!
pof said:
change bootsplash and rom cooking will be possible soon
Click to expand...
Click to collapse
wonderful news! i really hate the docomo logo.
ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar is something i am interested in using and i am looking for a link to a tutorial of how to instal this type of stuff...i have a locked G4
killacam13 said:
ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar is something i am interested in using and i am looking for a link to a tutorial of how to instal this type of stuff...i have a locked G4
Click to expand...
Click to collapse
What about that ROM interests you? Is it even appropriate for a G4? Perhaps a search of the forums for info on that ROM might help. There is also the WIKI http://forum.xda-developers.com/showthread.php?t=277976
--M
(please read, re-read, and read some more before you flash your G4. You don't want a really expensive paper weight.)
http://forum.xda-developers.com/showthread.php?t=284189 is were i got it from...it runs on g4s that r locked...which is what i have so i wanted 2 no how to put it on my wizard...i mean every1 there that did it never asked for a tut or anything so i thought there was a link to a tut i was missing...so if u kno how to install this or anything else like this plz do tell
charge phone to 100%
download rom, attach phone remove storage card.
run exe
tick boxes
Avanti in italian is next, avanti all the way till the end (tick boxes) and mda will re-boot to three colour screen progress bar and when 100% it will reboot and will run the first time setup allow the extended cab to install after allignment and welcome reboots itself and all done an MDA running faster
Add your settings GPRS.
,etc
but there r 3 exe's in it... i took newromupdateutility_wizard_noid.exe and updated my rom...but now there is still RUUResource.dll, RUUGetInfo.exe, EnterBootloader.exe, and nk.nbf so what do i do with all these other things in the folder...?...help plz
the first one the noid one
the other files are what it uses to put the mda in bootloader menu, etc if you ran the noid and the mda finished thats it
ok...i did it and on mine b4 it says E and connects to the internet but after i dled it and tried 2 get to ther internet it said and i couldnt connect so i went back to the original version...anyway to get this working?
yes that just means that you need to add your provider gprs settings to get on the internet for your device what service provider do you have?
i have t-mobile...and another wuestion...wat exactly does wizard love to 2 ur ppc...makes it faster? adds somethin 2 it...wut?
it makes it faster yes
t-mobile us settings for gprs can be found here you just need to add a new connection under connection
http://support.t-mobile.com/knowbase/root/public/tm21625.htm
theres no instant messenger on wizard love!??!?!?!?
No worries I haven't bricked my phone yet.
I bought a G4 Cingular 8125 that was advertised as unlocked. I know its sim-unlocked at least because i'm using it w/ a t-mobile sim card.
Trying to figure out if it is CID-Unlocked. How do you do this? I've ran EnableRapi and Cert_SPCS, rebooting after each and then tried to use the shell tool to even just view the current ROM info... all it shows in Comments is "This is a custom rom". Have also tried to use Wizard Service Tool to view information about my Wizard but to no avial I can't seem to get that program to run.
Any suggestions? I'm lost right now because everything I try doens't seem to get me anywhere. Only thing I haven't tried is running the Rom Updater Utility with a new Rom, as that seems my only option left to see if its unlocked or not right?
Three Key Topics - MUST READ - and a word or two
Make sure ... Is it a G3 or a G4? Soft reset if you don't know for sure, and look for the 0001 on the end of the IPL./SPL version numbers.
three zeros and a digit on the end - G4
less than 3 zeros-digit - G3.
Ket Reading - How to tell - http://forum.xda-developers.com/showthread.php?t=284292
G4 -- it's very unlikely to be CIDunlocked - you can only do it by paying imei-check for the software and unique key .. and it's unlikely the previous owner did that without telling you about it - it's a key selling point !! But nowadays it's not so vital anyway. The ShellTool method works perfectly IF YOU FOLLOW THE INSTRUCTIONS EXACTLY - and will allow you to change ROMS without threatening the sanity of your bootloader ... I've done it three tinmes so far.
Key Reading Shelltool - http://forum.xda-developers.com/showthread.php?t=293480
G3 -- just search the forum for LokiWiz and unlock it yourself ... CAREFULLY .. if its already unlocked, doing it twice won't kill it.
Key reading - the first post and the links in it http://forum.xda-developers.com/showthread.php?t=285435
Yes I did read almost everything. I have a G4 My IPL/SPL is 2.25.0001 so yes its a G4...
I've read each item you posted about 3 times each. Even the bs responses to them I read not just the first page or so. I've also read the faria install tutorial and tried that. I've also done the shell tool tutorials and i'll explain the problem that arises.
Also EVERY time I follow the directions EXACTLY on shelltool nothing happens.
I've installed both Cert_SPCS, and EnableRapi on the phone then reset it. Once it boots back I turn on flight mode to disable the radio then open shell tools and click Get ROM info and nothing comes up. I'm assuming that the ROM info is from the phone? or is it from the nk.nbf of the rom you want to put on the phone?
Then just to see what happens extract takes about 10 seconds to complete and flash takes about 21 seconds to compete. The phone is connected to active sync so not sure whats up with it but oh well. I put on Wizard Love and it does what I was trying to accomplish. Still would like to try out a WM6 Rom to see the differences but not the big of a deal to me anymore.
Also if you read my post... I bought my phone from craigslist... advertised as unlocked. Trust me when you meet a guy you can barely understand for a phone that costs $220 you don't wanna sit around in his car and idle chit chat. Specially in the area that we met. When I asked the guy if it was fully unlocked he said yes or it should be because I paid for it. Also my phone isn't branded with cingular 8125... not sure if it makes a difference but it is branded with HTC
have a G4 My IPL/SPL is 2.25.0001 so yes its a G4...
Click to expand...
Click to collapse
It's a G4 - so it's unlikely to be CID unlocked whatever the vendor told you. Proceed as though it is CID locked.
I've installed both Cert_SPCS, and EnableRapi on the phone then reset it.
Click to expand...
Click to collapse
Sorry to ask a dumb question, but I assume you installed AND executed Cert_SPCS, and EnableRapi ??
Once it boots back I turn on flight mode to disable the radio then open shell tools and click Get ROM info and nothing comes up. I'm assuming that the ROM info is from the phone? or is it from the nk.nbf of the rom you want to put on the phone?
Click to expand...
Click to collapse
It's from the nk.nbf rom file you put into the same dir as shelltool. If its there, you'll get the info, if it isn't - you didn't read the instructions properly ...
Then just to see what happens extract takes about 10 seconds to complete and flash takes about 21 seconds to compete. The phone is connected to active sync so not sure whats up with it but oh well. I put on Wizard Love and it does what I was trying to accomplish. Still would like to try out a WM6 Rom to see the differences but not the big of a deal to me anymore.
Click to expand...
Click to collapse
I had the fast flash problem too. Turned out to be a corrupt ROM file. Get one of the ROMs from the list that's regularly posted around the forum. Alternatively I used the one from http://forum.xda-developers.com/showthread.php?t=297762 this thread. Don't forget to use the password when you unpack it !!
I'm afraid that's the best I can do as far as help is concerned .. good luck .. it worked for me
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
hanissusa said:
I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
This thread was hardly 1 hour old and you make a rather rude statement. This forum is supported by volunteers, not people that sit around all day waiting for posts to come in and find a solution that drops out of no-where.
hanissusa said:
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
You are not going to make any friends this way mate. If you want quick solutions then read all the material that's on here and search for the answer yourself.
If you don't want problems then leave your phone in its standard state.
WB
@camus_dvd: have you checked out the wiki? There may be a solution there. If not, you need to give us more info?
Have you ever successfully flashed before?
Give us Versions? Windows, ActiveSync, .NET, ROM, RUUWrapper (e.g. is it the custom or a standard shipped), etc.
Did you try removing the battery for a couple minutes?
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
These answers will help us help you.
Oh, and about the volume issue, try using the google search link in my sig to search the forum for "hermes low volume tweak" or something like that. I had a similar problem, but cannot remember the tweak. I do not THINK It was the one you posted.
Heck - onew final edit. I got curious and did the searching. You will find a thread HERE and it references a tweak in the wiki HERE HERE . Hope this helps.
@hanissusa: sorry you did not get any "intelligent" answers. If you are unhappy, you are not a prisoner here.
If you want quick solutions then read all the material that's on here
Click to expand...
Click to collapse
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
The reason I tried to flash my radio bootloader is because suddenly the phone started to freeze(about every 30 mins). I thought may be the operator has a new radio version so I need to upgrade in order to get the best connection and most importantly never have my phone freezed again.
Did you try removing the battery for a couple minutes?
Click to expand...
Click to collapse
Tried about 20 times, still unable to flash radio rom with any of the available versions. Always freezes at 0% thru RUU, if I use SD card method freezes in the 10-15% range. I am able to flash everythin, including SPL, operating system, but not the radio rom !!!
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
Click to expand...
Click to collapse
Tried that as well. Tried using MMTY, checksum gives me radio error.
sorry you did not get any "intelligent" answers
Click to expand...
Click to collapse
I got several answers of this type:
"Go read Wiki"
"Go try this method"
and I have done all of it and nothing helped the problem.
You can consider above answers very intelligent, however I did not get a single anser form POF or Olipro - people who actually created this software and know most of the tricks.
for me same problem, only that i can't use my device anymore( : I tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%
hanissusa said:
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
Click to expand...
Click to collapse
I wonder what kind of institution gave you said degrees? I have a degree in Japanese and Linguistics but I suck at both.
hanissusa said:
"flashed my device and made super CID, so its fully unlocked"
Click to expand...
Click to collapse
Flashed and superCID does NOT mean fully unlocked. If you can read programming and or networking text books, I don't understand what is so hard about the wiki?
If you read everything and actually tried to understand it all, then you would know that flashing the radio is inherently dangerous and that 9/10 times the radio is not the issue.
camus_dvd said:
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
Click to expand...
Click to collapse
Read here:
http://forum.xda-developers.com/showthread.php?t=332565
then here:
http://forum.xda-developers.com/showpost.php?p=1177210&postcount=5
or from here:
http://wiki.xda-developers.com/
then read the stickies and do a search.... it's all been discussed before
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Is there a senior, experienced member on this forum from London, UK ? Please help me fix the radio, beers and drinks are on me.
ady_uaic said:
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Click to expand...
Click to collapse
Is this what you are looking for?
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
@hanissusa,
Why don't you just send your device back to the repair centre, foot the bill, and put it all down to experience? You may have a hardware problem that nothing on here might solve.
You might be better off going down that route than going through the pain of trying to sort it and not getting anywhere. Also stops you p**sing people off on here. You can't claim that just because you have had a bad experience we should all stop flashing our devices.
We are all aware of the risks and if we can't fix it then its put your hand in your pocket time and send it back to be repaired.
Good luck with it; hope it all works out.
WB
thx a lot. I will try it, 'cause i'm tired to use all kind of stufs
my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?
how can i downgrade my SPL ?
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
hanissusa said:
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
Click to expand...
Click to collapse
Have you called the repair centre to see whether they will fix it or not? Your worse case scenario is that they say no. There again they might say yes, especially if you are willing to foot the bill, or put you in contact with another company who can sort it out for you.
I really do hope you can get it fixed; however I think you have started out on the wrong footing on this board and you may well find that people on here now just don't want to help you out (please don't shoot the messenger).
Good luck with it.
Cheers
WB
ady_uaic said:
how can i downgrade my SPL ?
Click to expand...
Click to collapse
You can't without a running OS setuped on your device. If you don't have the HardSPL you should try to flash with the default flasher AND a rom matching your CID.
If there is a rom matching your CID out you may have quite good chance to get your hermes back to live. Toying without hardspl is a really bad thing
and that hardSPL how can i do it?
Have you called the repair centre to see whether they will fix it or not?
Click to expand...
Click to collapse
Which centre should I call if I live in London, UK ? Maybe somebody wants to help me fix this and get paid ?
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
One last thing - i tried to use the update tools again but it says there is no device connected so I did a hard reset and tried again but no go, after a hard reset i can flash the other roms though
cheers all
No Panic !!
andytof47;1862521 said:
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
cheers all
Click to expand...
Click to collapse
No Panic~~~
Pls try to have a look to the link at my signature
( HardSPL easier)
please reply if ok!
I thought The sticky on top of the forum covered this
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
andytof47 said:
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
Click to expand...
Click to collapse
that is good and for experience users, mine is mostly for juniors. Please read and nothing bad.
The jumpspl... 100% work, and follow the steps, never fail.
Will your method work when not booting?
Just read your method and I hope to try it soon, but will your method work if it is not booting --- the method sounds like it needs the system to boot is this correct?
I hope it will work on this system while it is not booting...... I will let you know
OK I just read the whole post -------- The only file I can see is the jump spl.zip --
is that the hard spl or what?
dioxda2 I see how helpfull you are and thanks so far but how do I get the phone out of recovery mode or whatever mode that is??? what is the file I need??? please
thanks heaps