Related
I'm seriously tempted to buy one of these devices, as my MDA Pro is abit big for work.
Has the Missed Call Issue been resolved yet?
As far as I followed the discussions on various boards, the "Missed Call Issue" has only occured with U.S. carriers, I haven't seen a complaint by someone outside the U.S.
I am using my 8500 for the last three weeks, and I never had a missed call....
Additionally there seems to be a workaround!
hi i m really interested in changing from prophet to startrek, i would really appreciate it if you guys could help me out on the following:
1. battery life - mp3 + bluetooth (2 hours), calls (30 minutes), PDA (1 hour). would i have to recharge it everyday?
2. dust problem - will dust slip in between the display and the phone?
3. the ringtone - is it too soft? what if i change it to MP3 ringtone would it help?
4. AD2P - is it just mono sound using bluetooth headset and is there AD2P?
Thanks in advance guys!
oh and one more thing, can i activesync my existing contacts and schedules to the startrek?
From my experience:-
1) No, every other day.
2) No, the screen is sealed.
3) I use the oldphone ringtone from the PDA's and it's pretty loud.
4) A2DP is stereo, but you have to set a reg key to make it that way.
Bonus question: Yes, you can active sync your stuff.
thanks for your answer wwaveydave!!
Derrick said:
oh and one more thing, can i activesync my existing contacts and schedules to the startrek?
Click to expand...
Click to collapse
Yes it syncs well however, I have had a few conflicts as I have a QTEK S100 sync'd with 2 PCs and wanted to also sync the 8500. I first needed to upgrade from activesync 3.8 to 4.2 which was supposed to be easy. Bl**dy microsoft, no way was it. Had trouble connecting and also 4.2 seemed to think my phone was never ever connected.
Got it sync'd now and all seems well. Problem for me was activesync 4.2 syncs more information and this didn't help. It now sync's contact photos which is nice.
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
I use BatteryStatus, It can place a (bluetooth, wifi) shortcut on today....
Have a look also to Ilauncher....
With that you can have what ever icon you want on your today....
So bluetooth, wifi, shortcuts to other program ecc.....
You can also edit the icon with your own...
That is a very nice app...
Thanks for the reply but what I am actually looking for is similar to jetware which adds extra profiles to the bluetooth stack not icons, it helps with devices or bluetooth car kits that can read sms etc
Battery status does not actually add anything or extend the bluetooth stack.
I wonder if we can contact the author of the jetware extension to release the source code. He's obviously not doing anything with it anymore.
Top! UP! UP!
Yep UP! i'm also looking for a way of extending the BT stacks functionallity without having to replace the stack itself. Perhaps we really should try to contact the author of jetware
No other app in this world to function like Jetware extension?
Woody_XDA said:
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
Click to expand...
Click to collapse
may i ask why are you looking for a similar one and not use this one?
i am asking 'cose i found myself long time ago that is causing some problems
with the BT communication....do you have the same problems?
In my case there are some minor problems with BT connection and it also does not deliver entire functionallity that i require - like PBAP and other stuff
Same here. It's not finished and the developer just kinda dissapeared two years ago. Sooo we're looking for someone to take over. Someone please take over on this! There could be a lot of money involved. I would pay up to $100 to get this done!
I'm on the case
Also, what is PBAP?
Ok I think I've found everything I need to get started on this. Since I don't have a device to test this with, I need to know what feature you think would be easiest to implement or what feature you want the most. ie: List contacts, list messages, etc.
This way, I can focus on implementing this one thing, and once it's working i'll know i'm on the right track and can move on from there.
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
i'm gonna go try this on my pioneer bluetooth
*update* pocket bluetooth works perfect with my pioneer in-car bt unit.
HI guys
Just wondering does Jetware 1.31 work well enough with car kits? I tried my Polaris with the Alpine KCE-350BT and it doesn't work so am about to test it using Jetware. Just wanted to know do you need to run Jetware each time or just for the initial phone book upload? Once the contacts are uploaded i think it should work properly without running Jetware correct?
Just can't really place anything on the today screen or a shortcut, so interested to hear if there is anything else better.
thanks,
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
this didn't seem to work on my HTC TC.
Anyone else close to a working alternative? I really need something to replace OBEX and use the PBAP format to upload contacts to Alpine car kit.
Are there any registry fixes or does WM6.1 get around the problem as claimed by MS.
Cheers,
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
KeithXP said:
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
Click to expand...
Click to collapse
How do you go about disabling synchro phone profile - is it the same with touch cruise?
I never really 'got' Jetware. Do you just need to send contacts once to the car kit? Also i assume you are meant to toggle bluetooth on/off using the Jetware shortcuts, not the normal bluetooth??
Thanks- i'm going to go bakc to the shop and test it now i've got a 6.1 Rom on, as the OBEX was a problem so perhaps with this turned off in adv. config. it may work (fingers crossed).
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts. The huge plus is that if you use automatic synch, you will get duplicate entries for every phone number held for a given contact. If you use the Jetware Extension to send contacts, you get one entry per contact, with all the numbers correctly identified as mobile, home, work.
Then when you dial, you say the contact name, then 'home' or 'work' etc. If you use voice dialling this is essential, otherwise you have to record every number individually (voice tag "John Doe home", "John Doe work" instead of one tag "John", then "mobile" or "home" when prompted for number type).
I hope that makes sense, but since your message is two weeks old (sorry, haven't been here for a while) you may have it figured out.
AFter all that, it seems the developers at Jetware have given up. They don't respond to email and the link to purchase the software is broken/dead. That's a bummer as I have lost my activation code and just got a new phone....
KeithXP said:
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts.
Click to expand...
Click to collapse
Thanks for the reply - I have never seen this option of 'disable synchro' anywhere on the phone, jetware options or on the car kit interface.
It seems to be working well enough now, but the phone book did get corrupted and couldn't fix it till i paired another phone then mine again. (contacts were mixed up - some first name last name, and didn't show /H or /M for home or mobile etc but seem ok now).
Part of it could be having to be patient with the Alpine BT kit, as it takes a while 'updating' on pairing to copy all the info again. Still doesn't work as fast or as reliably as i'd hoped, but probably good enough. May not have this phone forever, but don't want to get another one yet.
It's a shame they aren't supporting their product any more. Hopefully someone else could improve it or write something better, as the one annoying thing now is that i can't put the phone into sleep mode when i press the button - keeps powering back on to full lit screen, every few mins which wastes the battery as well as distracting when the phone is in the car mount- now i just have to lock the device as a workaround.
I've connected bluetooth GPS to 3125, seemed to be OK (it asked about pin and after that info about equipment beeing connected).
Unfortunatelly GPS software doesn't communicate with GPS equipment. It is searching for bluetooth GPS but doesn't find it. I tried to set connection (port, baud rate) manually but I don't know which COM port is assigned to bluetooth
Is there any way to check this on ?
P.S. I've installed WM6.1 standard by Erofich
try 6.1 pro
I found that bluetooth is using COM6.
The biggest problem was in finding properly working GPS software
hi bchrubas,
Which GPS software are you actually using on WM6.1 standard?
I tried WM6.1 pro for a while but found WM6.1 standard more handsome since I manly want to use my phone simply as a phone
Anyway I'm still missing a good GPS program for navigation which is not intended for touch screen devices.
For now I stucked with Sygic McGuider (http://www.sygic.com/)
It doesn't need touch screen and StarTrek (or At&T 3125) is on the list of compatibile devices. MCGuider runs on STK quite fairly, I didn't noticed any major errors, maybe if it was little faster? (I know that it is possible to overclock this phone but i'm not quite sure about it
Anyhow, I'm stiil searching for some simple GPS track loging software
I looked around a bit and on smartphone-freeware.com I found these two programs:
gpsVP
chtiGPS
both seem to be able to do the loging. And the first one might even be worth trying as a navigation software for me.
not bad, especially this gpsVP
if it really support Garmin format maps it could be very useful
Hi @ all,
since a few days i am a proudly HTC Hero owner. Its quite an amazing phone with many features and a steady growing Market.
At the weekend i tried to couple my Hero with my bluetooth handsfree set installed in my car. But what i recognized wasn't so much pleasing: The Hero didn't display the handsfree set in the list of available bluetooth devices.
Before i got the Hero i had a HTC TyTN II aka Kaiser and it worked well with the handsfree set.
Perhaps anybody else have some similar trouble or experience with this and maybe a solution, fortunately. It would be great to keep usage of my handsfree set furthermore.
Thank you and best regards
On handsfree there are some buttons right ? You need to press them in a combination so the handsfree can be detected by your Hero. Just search on the handsfree guide or internet. I cannot help you because I don't have it and don't know the button combination. When you find it go to settings and turn on Bluetooth on your phone. Just search it and connect to it
Hi omokas,
yes, you are right.. but i've done this.
The users guide says you have to press the main button for 1 second. After that you will get a feedback sound and the led gets flashing... so far so good.. everything is fine but the Hero doesn't recognize.
Hopefully there are no different bluetooth protocols or whatever the devices can't communicate.
Have you tried an application from Market ? It may to the job
But if not then your handsfree must be an older version that your Hero can't recognise. Before buying a new one make sure your phone works with other handsfrees.
Have you tried an application from Market ? It may to the job
Click to expand...
Click to collapse
No, i haven't tried yet. Can you recommend one?
At the moment i'm not able to try an other handsfree. But i've just seen the handsfree is able to store seven pairings... maybe there is the problem.
So i'm going to delete all pairings and give a next try.
Thanks
Yes try that. You could try the application "Bluetooth+Headphones".
Sorry if I am not able to help further but I don't use handsfree because I am 13 and I don't know how to drive.
No Problem... I am appreciate for any Help!
Did you get any results yet? E.g. did the removal of the other pairings work? Or the app from the market?
I'm quite interested in this since I'm still looking into getting the CK-100 build in my car
I am planning on getting that carkit wired up outside of the car, so I can at least give it a try and see if it wants to work. But don't have that much time to give it a try yet, end of next week perhaps...
I have a CK-7W and it works with my Hero (official orange ROM).
It was a bit of a nightmare to get paired in the 1st place, the hero failed to find it but I kept trying and it eventually found it. I think I might have reset the hands free though (pull the power for a few minutes).
The device usually pairs pretty fast, sometimes it takes a min or two but not often.
My only gripes are :
1: some times it doesn't send the audio to the speaker keeping it on phone requiring you to use a menu option to do so.
2: The ring tone isn't the one set on the phone but a generic ringer.
3: Occasionally the phone doesn't disconnect properly when the other end hangs up requiring you to do so manually.
I have a CK-15W car kit
and its fully supported
it even downloads the phonebook very well
ck7w and hero
My hero worked first time! To pair you need to leave ignition off and hold the button in until it beeps, not just a short push as that just turns the car kit on. Once its beeped search for it and then pair using code. As yet I have had none of the problems mentioned here. I hope this helps
I have the same phone (Android 1.5 stock ROM) and the same Nokia CK-7W handsfree set.
For me this works fine. Didn't have to press the button on the handsfree set. Just searched for BT devices and paired.