Hello everybody from Russia (Moscow).
My phone model is O2 Xda Neo (Germany)
I have used this
278638-ruu_prophet_215746_2157138_023021_qtek_rus_ship
RUU_215737_2157135_023021_QTEK_s200_RUS
and return back to original O2 Germany without problem.
But I have installed next:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
Now I cannot install any other software. only this english version.
In install time (on 95%) I got next message
error 326: invalid command - the NBF file could not be used for your PDA phone - please check your NBF file
Boot screen has
IPL 2.15.0001
SPL 2.20.0001
The phone is ok. I can install this english version again, but I would like return to original German version or Russian.
I tried to use
pdamobiz.com_downgrade_and_unlockcid
and RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
but it does not help.
Can you help, please?
piece of cake:
what do you need is
reCOOK the ROM using molski.biz devpack...
just be sure to remove the ipl/spl nb file after you've extract the nb.nbf file
downgrade
Hi,
I have searching for a long time and used so much tools to downgrade my Qtek S200 Pocket PC to JAMin_WWE_1000925_10009114_11420_ship.exe (SPL 1.xxx, IPL 1.xxx)
When directly run "JAMin_WWE_1000925_10009114_11420_ship.exe" I get this error: the NBF file could not be used for your PDA phone - please check your NBF file
JAMin_WWE_213923_2139123_022021_shi.exe ROM is not my solution. I need to change my IMEI. iWizard and Lokiwiz03a don't help me to change IMEI.
Can anyone help me how to do Rom Cooking for SPL 1.xxx?
http://www.molski.biz/ here the rom cooking program and it is complicated a little bit.
Related
Sorry for my bad english
(i will now be responsible if something happens in your device)
reply for much more clarification
******************
Specially dedicated to the Filipinos!! MABUHAY TAYONG LAHAT
******************
Well first of all i like to say Thank You very mush to WAXX who helped me in upgrading my o2 1.66 to 1.72. Thanks You WAXX.
********************************************************
Well... firstly download this file came from WAXX.
http://forum.xda-developers.com/download.php?id=1261
After the download extract the zip file inside it, you shoul be seen 7 files.
I recommend you to extract it in desktop/new folder.
Plug the cradle in your USB.
Insert your XDA II in cradle
Run HimaUpgradeUT.exe, Then follow the steps.
if error appeared, remove the device in cradle and soft reset it, then run the HimaUpgradeUT.exe again.
if error appeared again do a soft reset again.
If no error then it will now smoothly running up to 100% of the proccess.
For me the process takes only 15 min. There are stage 1 to stage 5 for completion.
That's it.
********************************************************
Goodluck.. GodBless..
(i will now be responsible if something happens in your device)
You can approach me for some questions.
Take note this ROM was came from MAXX.
Thanks WAXX for your help.....
CONGRATULATIONS !!!!
I would like to know to your device information (list of rom) !!!
Ok, downloaded the ROM
How do i backup MY rom incase anything goes wrong ?
will the upgrade work with a XDA II for O2 UK Network ???
cheers
Hi
I downloaded the file and unzipped it, when i try the upgrade it says error 120 country id error. my rom is 1.60.00 wwe dutch what is the problem?
Thanks
I would strongly afvise anyone who wants to upgrade to use the 'manual; by dcs together with any ROM Upgrade to prevent (future) country-id errors.
see http://forum.xda-developers.com/viewtopic.php?p=62760#62760
double_ofour,
pare i certainly hope you modified WAXX's ROM to set your Device to O2, instead of CDL You may have had a successful ROM upgrade now, but setting your device to CDL has major implications for future ROM upgrades (Hint: You cant use official O2 ROMS).
Pare how can i convert CDL to o2? step-by-step please
A splinter topic from DCS's post Fix and prevent ROM upgrade/downgrade Country ID errors.
Okay here's the skinny. I believe there are two parts to this problem.
One the user is not complying to the procedure in changing the codes.
Two the user has previously upgraded using a foreign Extended ROM ms.nbf file (filled with own modified CABs).
I have included the ms_.nbf files of various operator IDs. They do not have any Extended ROM CABs or Splash screens (to be inserted by user according to your locale and fancy later when upgrading to the WM2003SE ROM).
Begin the repair.
Run HimaUpgradeUT.exe together with the ms_.nbf, HimaClearJumpCode.exe and HimaGetDeviceData.exe files. Do not add any nk and radio_ *.nbf files.
After completion of the fix you can start with your WM2003SE upgrade.
Or you can simply remove HimaGetDeviceData.exe and upgrade if you can live with the foreign ID in your Himalaya.
I need help!!!!!!!! :? :? :? :? :?
My freind upgraded my imate to win2003se. After booting the imate gives only black screen with the word serial or usb when cradled.
We tried to re-upgrade or re-downgrade but no hope. Always the same error message: Error 120: Country ID Error.
is that any way to find out which rom I have now on my mashine or to do anything to get it back booting.
Thanks in advance.......
Flash
Remove your battery for awhile.
Pop it back in and hard reset.
Then try to flash with the four different ms_.nbf I attached.
Thanks Dr.Stein
I did what you described in you reply but no chance.
I am getting the same Error 120.
Do you have any idea what to do?
Thanks in advance
when you get stuck in boaltloader screen, thing you can do is soft reset and continue to upgrade again. but if still can't work just downgrade with base rom (1.03 for boatloader 1.02) and (1.60.44 for baotloader 1.03)
Well I have the bootloader 1.02.
Where can I find this rom
Thanx. :? :?
What did this error means: N-O-N-8-N after Error code 120
Thanks
:lol: Thank you Dr Stien i somehow managed to change my country id.
But Thanks to you its all how it should be Thanks Again
Spliffy
8)
Thanks guys, I solved it.
Mabrook... :lol:
your friend "Roaydak" :wink:
if I understand correctly :
these file will set your country ID /operator ID to O2 so the WM2003SE upgrades (which all have O2 has operator ID ) will work.
depending on if yours is now Qtek, CDL, TMOBILE or O2 you have to start from the right file.
Which means that afterwards when you want to downgrade to your original Qtek, CDL or TMOBILE ROM you will get Country Id error ?
unless you have manipulated offset 74 in the WM2003SE upgrade.
plz correct me if I'm wrong
Fix
M4io said:
if I understand correctly :
these file will set your country ID /operator ID to O2 so the WM2003SE upgrades (which all have O2 has operator ID ) will work.
depending on if yours is now Qtek, CDL, TMOBILE or O2 you have to start from the right file.
Which means that afterwards when you want to downgrade to your original Qtek, CDL or TMOBILE ROM you will get Country Id error ?
unless you have manipulated offset 74 in the WM2003SE upgrade.
plz correct me if I'm wrong
Click to expand...
Click to collapse
No Bro these files will set your Himalaya to it's original state - select Qtek, CDL, TMOBILE or O2 accordingly.
Afterwhich you should alter the WM2003SE ROM to your individual Himalaya - Qtek, CDL, TMOBILE or O2.
Only then can you do your upgrade.
Hi,
About the QTEK2020 ROM:
------------------------------
My current ROM is the HI_TMNL_17200_190_11700_Ship from the official T-Mobile.NL site.
I want to upgrade to WM2003SE, where can I get this ROM ?
I downloaded some WM2003SE roms here,but always country ID error.
This can be fixed with a rom editor i read, but it looks complicated, if anyone could post me a link with the SE ROM link (or send me a short simple text to edit & modify a rom to clear the country error)
Thanks!
Innovator/Belgium
try this link
" Fix and prevent ROM upgrade/downgrade Country ID errors "
http://forum.xda-developers.com/viewtopic.php?t=12101
and this
"Genuine English WM2003 SE upgrade for Himalaya uploaded here"
http://forum.xda-developers.com/viewtopic.php?t=13588
Hi Innovator,
try it this way:
Unpack the WM2003SE
Delete HimaClearJumpCode.exe and HimaGetDeviceData.exe
Start your XDA2 in bootloader mode manually
Connect the USB cable
Run the upgrade HimaUpgradeUt.exe
If it doesn't work, you need to get modified HimaUpgradeUt.exe, which doesn't check for countr/operator ID.
Or you can do it "traditional" way by editing all .nbf files manually.
If you'll run into problems, just let me know...
good luck
buzz
Hi
My phone is I-mate k-jam (kind of G4).I unlocked my phone’s CID by hard SPL program from your website . I could not install phone’s original rom. Then I installed original rom by shelltools program. My phone is not operated after hard resetting. When I switch on my phone, it stopped in three-colored page. Please be kind enough to conduct me.
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
randomgoon said:
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
START-sSPL.exe error : no device connected please help
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
LancerV said:
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
Click to expand...
Click to collapse
is not installed
error [294] : invalid vender id
please help
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
hi
i installed K-JAM_Arabic_2160901_21609102_20710_ship.exe
error : [296] : upgrade only
this nbf file cannot be use for your pda phone. please get newer nbf file help please please
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
ipl : 2.17.0001
spl : 2.17.0001
behzad_sedat said:
ipl : 2.17.0001
spl : 2.17.0001
Click to expand...
Click to collapse
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
the-equinoxe said:
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
Click to expand...
Click to collapse
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
behzad_sedat said:
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
Click to expand...
Click to collapse
tyr the ,wizard love, rom did the trick for me
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
i cant download wizard love rom
You have requested http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar (54413 KB).
You have reached the download-limit for free-users. Want to download more?
Get your own Premium-account now! Instant download-access! (Or wait 92 minutes)
lol.. Wait 92 minutes then
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
Dear Sir
I installed rom of wizard love and my phone is operated.
Thank all of you
In the past I have installed a WM6 rom without having first installed on my Jamin the HardSpl G3, and accordingly pda I crashed ...
I followed the steps outlined here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
to get the pda and so fortunately happened ...
I have tried in every way but since I can not install on HardSPL G3 pda I decided to return to the original rom Imate Jamin WM5...
I was now trying to reinstall the original rom on my jamin, the
JAMin_ITA_2130921_21939111_02.07.20_ship.exe
But the pda connected to the computer, with the starting procedure, the pda comes into bootloader tricolor with the following words:
IPL 2.20
SPL 2.20
RUU
USB
but after a few seconds on the computer appears the follow message:
ERROR [296] UPGRADE ONLY
This NBF file cannot be used for your pda phone, please get newer NBF file
Some of you know what it is and how can I do to reinstall the original rom?
Thanks in advance for your help
Hi
IF you want reinstall the original rom
You must
1/The battery up 50
2/ Install Prophet_PV_Temp rom into bootloader
3/Install HardSpl G3
Finally Install the original rom>>>
mmmh, bad problem
the phone refuses to "upgrade" to a lower version if it is not hardspl.
The original bootloader only accepts upgrades not downgrades.
Did u try this tool
http://forum.xda-developers.com/showthread.php?t=377904
I fear if u cannot hardspl there is no way to another rom anymore