I can entry the 3 color level, use usb connect. Someone told me can flash with original rom, but I couldn't find it in FTP or HTC.COM. Hard reset is not possilbe to solve this problem.
cwmaster said:
I can entry the 3 color level, use usb connect. Someone told me can flash with original rom, but I couldn't find it in FTP or HTC.COM. Hard reset is not possilbe to solve this problem.
Click to expand...
Click to collapse
If you've CID unlocked the device with Olipro's unlocker then you should be able to flash any ROM, so long as it's for the correct device!
leoni1980 said:
If you've CID unlocked the device with Olipro's unlocker then you should be able to flash any ROM, so long as it's for the correct device!
Click to expand...
Click to collapse
Thank you for your responds, but the problem is I can't activesync with my PC, It means if I want get the CID unlocked, I must get the software can be used in Bootload( in 3 color level with USB line). But I could not find it. Another way is find the rom for HTC x7500(de), WM5 or WM6, same problem, I can't find them from internet or from the HTC.COM.
cwmaster said:
Thank you for your responds, but the problem is I can't activesync with my PC, It means if I want get the CID unlocked, I must get the software can be used in Bootload( in 3 color level with USB line). But I could not find it. Another way is find the rom for HTC x7500(de), WM5 or WM6, same problem, I can't find them from internet or from the HTC.COM.
Click to expand...
Click to collapse
Find a friend's xp (or even another vista) computer and use it. Surely you do have friends
victoradjei said:
Find a friend's xp (or even another vista) computer and use it. Surely you do have friends
Click to expand...
Click to collapse
I have done it by 5 PC
Related
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
Ok, I've been trying to update my 8525 for hours...here is my problem. First, I tried to HardSPL-v7 but I kept getting an "Error [240] File open". I think this is preventing me from doing any ROM update. When I try to run the Cingular ROM update activesync shuts down and I get a connection error, I think it is "error [260]". I have wiped or cleaned out my 8525 so that I am back to day one. I have tried both ROM updates on 2 separate computers and I get same error messages on both computers. I have searched the Wiki's but have found nothing, so please help. As you can tell, I am a virgin to ROM updates so please go gently.
I should add, my present ver. ROM AKU 2.3 (1.34.502.7018.01H) SPL 1.06 IPL 1.01. Radio is 1.16.
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
mrvanx said:
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
Click to expand...
Click to collapse
I have, I have even tried the mtty "fix" but I had problems with that as well. I get a modem connection screen but there is nothing about a USB connection.
Bit more info would be nice, which ROM are downloading, and where from??
Also what procedure are you doing to update?? EXACT info please.
mrvanx said:
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
Click to expand...
Click to collapse
Ok, I just tried it 2 more times, Hard-SPL. It flashes to the 8525 and goes into bootloader and shows the following "HERM100 IPL-SSPL by Des HERM100 SPL-1.09.ds" at this point activesync 4.5 shuts down the 8525 is stuck in bootloader (it never reboots) and after a few minutes I get "Error [260] Upated Error". Hard SPL shuts down and the 8525 is stuck in bootloader mode. At this point I have been disconnecting the USB cable and doing a soft reset, once the phone is on, I go into bootloader and the old info shows up SPL 1.06 and IPL 1.01.
Let me have a think, firstly do you have the latest versions of the .net framework installed?
I was able to finally run HardSPLv7, I had to do it on another computer. Now, I would like to update to RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe. I assume I should use the same computer that I used to successfully run HardSPL. Do I need to rebuild the rom file with RUUWrapper.exe (CustomRUU by olipro) & Dutty's Good NBH Tool, before running the RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe update?
mrvanx said:
Let me have a think, firstly do you have the latest versions of the .net framework installed?
Click to expand...
Click to collapse
I have .Net 1 thru 3.5 (pre-release) installed on the computer that I can not get to run any ROM updates.
9
compudds said:
I was able to finally run HardSPLv7, I had to do it on another computer. Now, I would like to update to RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe. I assume I should use the same computer that I used to successfully run HardSPL. Do I need to rebuild the rom file with RUUWrapper.exe (CustomRUU by olipro) & Dutty's Good NBH Tool, before running the RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe update?
Click to expand...
Click to collapse
Yes if you carry on the guide past flashing hardspl you will get the radio updated aswell.
Can i ask, what is different on the computer you used???
mrvanx said:
Yes if you carry on the guide past flashing hardspl you will get the radio updated aswell.
Can i ask, what is different on the computer you used???
Click to expand...
Click to collapse
Off hand, the major difference would be Intel (worked) vs. AMD (failed) but I doubt that is the problem, you would be flooded with questions due to so many computers that have AMD chips. The USB cable was the same as well. I'll have to think about that...
Definatly check your "failed" computer is up to date with .net and everything else, most likely a software problem.
I have this problem as well..
AT&T 8525 windows moble 6 trying to install the hardspl v7.
v3.5 and 3.0 .net framework.
the RUUwrapper program gets to the 'verifiying info' screen then give me an erroe 240 message. 'the update utility can not open the requested file.'
any help would be great. Looking to add the touch it interface.
thanks,
Mike
Read the post Hard SPL at the top of this forum and go to page 116 ( I believe its post #1160) and use the sd card method. You don't need to use the pc at all. I generally flasah ALL os's using the sd card method as it seems to be safer then using the usb method. No "sync errors" to deal with.
Cheers...
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
blackphnx said:
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
Click to expand...
Click to collapse
I loaded it thru the sd card just as the post above suggested. It loaded the hardspl just fine. My PPC seems to run faster as well.
Thanks for the help! it is much appreciated.
blackphnx said:
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
Click to expand...
Click to collapse
One thing that i have learned from flashing my 8525 is to remove any USB device except the 8525. This has worked for me.
swimmy said:
One thing that i have learned from flashing my 8525 is to remove any USB device except the 8525. This has worked for me.
Click to expand...
Click to collapse
But my mouse is on USB. I might try on different computer and post back the results.
UPDATE
I tried using my friend's laptop and it installed without a problem. I think the issue is with the .NET framework. I installed the latest one before flashing and it worked fine. Hmmm.. Im not sure about this tho.
Hello.... Try the sd card method. You don't need the computer...
Sorry if I sound condescending, but, I seem to find a lot of people saying that they have sync problems. Solution, Take the pc out of the equation (except to load files onto sd card). It is SOOO much safer then using the pc, no "sync" problems, no chance of usb being disconnected, reset button being hit or , worst case scenario, power failure...
You have to either have little or no battery power or MANUALLY hit the reset button with the stylus to stop the flash...
And thats my 2 cents....
Refer to post #13 to find out how to use sd card method to flash hard spl...
Cheers...
sd card method???
how?
This Rom is best for all those who have tmobile ameo stuck on bootloader
ENJOY
http://rapidshare.com/files/50715004/My_WM6_TMOB005.rar
Thanks very much. 2 Questions: Do I need to unlock my Ameo to use this and will GPS work afterwards?
Thanks
no neeed to unlock
gps works flawlessly
strange for me it says wrong vender id. I could really need the help because im stuck.
That is impossible, it will work for one countries ameo, but you cannpt have one thta will work for all ameos.
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Sorry I wasnt very clear, I was talking to the thread creator, your problem is due to the fact that his claims are false...
Ok i understand, can somebody supply me plz with the orignal german tmobile rom. My ameo is screwed. plz help
Cant the Tmob005 ROM be used on all Ameos?
adamelphick said:
Cant the Tmob005 ROM be used on all Ameos?
Click to expand...
Click to collapse
No, I don't think so.
For example, T-Mobile in Germany has the code T-MOB101
So, it's maybe for US-Ameos or GB-Ameos (I don't know)
all i know it doesnt work on my, and i need a rom for that i dont need to unlock the ameo because i cant untill i have it restored.
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Hi
Try get into bootloader (press "camera button+stylus reset for atleast 10 seconds") then try to unlock with Olipro's unlocker (read the unlock thread first) then you can load any Rom as you want. If you unlock you can revive the device.
Good luck
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Sexxmax said:
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Click to expand...
Click to collapse
Hi Sexxmax,
I'm new to this forum (getting an Ameo tomorrow) so I may be wrong but the problem may be because you have Windows Vista. I remember reading on the Universal forum that flashing and unlocking is almost impossible to do on a Vista PC.
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Sexxmax said:
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Click to expand...
Click to collapse
No, I'm getting the English Ameo. There's a member on this forum called tupisdin. From what I can tell he/she is quite the expert at recovering devices that are experiencing errors. Try messaging him/her or searching for his/her posts.
Hey guys today i downloaded the latest shipped rom from htc for advantage not knowing that the spl was 1.10! and mine was 3.50 so now i'm stocked in bootloader screen now knowing what to do and cant flash any rom! i tried some cmds with mtty but not working. tried removing battery but not working and still stocked in bootloader... i know that this can be fixed but dk how. plz help guys and gals.
before upgrading i was usin Sogarth's base rom and now i get spl 3.50 olinex on the screen.
the ruu cannot connect through usb with bootloader... stocked! anxious
you may want to try this
check that spl3.5 is still in your device (it says in bootloader)
If 3.5 is there
disconnect your device
switch off computer
reset device ( it probably boot stray into bootloader)
switch on your computer
connect the device
install appropriate room for your SPL
that worked for my
( I believe that enable rapi is there to allow for usb comms, but when you connect the device bootloadeR will change from serial to USB
As long as spl 3.5 is in the device OK you should be able to recover
p.s. if room install comply follow recovery procedure, (remove battery)
good luck
room = rom?
hirad_sabaghian said:
room = rom?
Click to expand...
Click to collapse
yeah
anyway, yes please tell us what your SPL version is now. I'm sure it is still 3.50.
also, have you tried reflashing the OS? the RUU can most certainly connect to bootloader. just run it in the normal way..as if the Athena was running WM
the only prob was that pc couldnet connect through usb with bootloader tnx PBL1 and tnx cmon... i solved it! i was shocked cause i thought i mixed up the device! tnx anyway
Originally Posted by hirad_sabaghian
room = rom?
Click to expand...
Click to collapse
Lol never trust a spell checker, they are treacherous criters and will get you in the most embarrassing situations at the lest expected moment.
Any way glad you problem is solved, some times the PC mess up the usb connection.
Hey there, ...
I was trying to flash hspl to get a costum rom on a friends HD2, but it is somehow not possible. it wont recognize the usb connection after changinging to bootloader (windows does though). Ive got a german vodafone rom on there right now, the one that it was sold with (1.66). Also when I try to put another version, it wont work.
Are there other possible locks i might have forgot about?
thanks
Hanni
SirHanni said:
Hey there, ...
I was trying to flash hspl to get a costum rom on a friends HD2, but it is somehow not possible. it wont recognize the usb connection after changinging to bootloader (windows does though). Ive got a german vodafone rom on there right now, the one that it was sold with (1.66). Also when I try to put another version, it wont work.
Are there other possible locks i might have forgot about?
thanks
Hanni
Click to expand...
Click to collapse
Run the hspl as administrator.
also, when hspl.exe times out, leave the phone in bootloader, and run hspl.exe again (right click, run as administrator)
try all your different usb ports, , leave the phone in bootloader all the time. plug it in, wait 20 seconds for 'serial' to become 'usb' then run hspl.exe
SirHanni said:
Hey there, ...
I was trying to flash hspl to get a costum rom on a friends HD2, but it is somehow not possible. it wont recognize the usb connection after changinging to bootloader (windows does though). Ive got a german vodafone rom on there right now, the one that it was sold with (1.66). Also when I try to put another version, it wont work.
Are there other possible locks i might have forgot about?
thanks
Hanni
Click to expand...
Click to collapse
Try this.....
thank you very much for your help, ...
i'll try it as soon as I get my hands on the phone again