Related
I know this is not supposed to be able to happen, but on two occasions today and since upgrading to new radio and DCD 3.0 my wifi has turned on and detected networks with the wifi switch set to off, not sure why this is happening and I can not duplicate it on demand, trying to turn on wifi with the switch of via comm manager still does not work. Trying to find some kind of pattern but it has only happened twice.
Perhaps with the new radio there is a way to turn it on and off via software, or perhaps my switch is malfuntioning.
I had a similar experience as well.
I noticed it when I soft reset (not all the time, but 1/10 maybe?) and when trying to activesync, it would sometimes turn on.
I wish there was a way to figure it out, this means that it should be possible turn on wifi via software doesn't it?
Now that you mention it one of the times it came on was right after a soft reset.
Yep, this is becoming a well known problem.....well, for me not a big problem, just a slight annoyance....in the new ROM/Radio. It must have something to do with the radio, because I never experienced this in any other ROM. I'm wondering if WLAN may be turning on when there are short lapses in carrier coverage, and when an app (like activesync....I sync my e-mail using outlook)is trying to be connected to data (the internet). I just turn it back off when it turns on by itself. It doesn't ever seem to turn OFF by itself when I'm actually using WLAN.
EDIT:
one thing that may support my theory is that when you do a soft reset, it takes a bit to connect to the carrier network, and this just happens to be one of the times that WLAN turns itself back on..
And yeah, the battery usage definately sucks....plus when WLAN is turned on, and you're not connected to an access point, you could have data throughput issues as it keeps trying to see if it can connect through WLAN and/or radio......
I need it fixed , I didn't catch it earlier and my battery lost 85% today wihtout me even using my phone. Normally I get 2 full days I haven't really used my phone today and was fully charged this morning now I am at 15%, very poor performance for my typical use.
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Same here, but has only happened a of of times.
louderjw said:
I am running dcd's 3.0.1 on my XV6800 and noticed that the wifi will turn on with the switch in the off position. It has happened to me a half dozen times or so. It only does it while I am on a call. Any suggestions? Has a solution been found yet? Any help is appreciated!
Click to expand...
Click to collapse
It only appears to happen while in a call for me as well...it happened with no additional software installed at that point so I'm certain it has something to do with the rom itself...I'm guessing the new radio but who knows for sure...
shame here
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Except that I've never installed WiFiRouter...
I don't have WifiRouter either.
cdoggwsu said:
Except that I've never installed WiFiRouter...
Click to expand...
Click to collapse
And I hvae never had the problem. (and I do run wmwifirouter)
i saw this when the kitchen first came out as well. i also saw that it wanted to connect to a roaming alot more than it should as well.
sprint will tell you to set you phone roaming settings to "sprint only" the phones and ROMs come with "automatic" enabled.
my sprint buddy told me long ago to change this from auto to sprint only. soft reset. let it conect to a good sprint connection. then switch back to "auto" and soft reset.
i haven't did this for a year or so, but when i started seeing the roaming icon after many of the soft resets i thought about it. since i did this i haven't seen the roaming nor the wifi bug.
i think it is the theory that when you softreset the phone set on auto looks for the first tower, which could be a roaming tower. this takes a little too long to conect. in this longer than normal connection time when something like activesync wants to connect and has no internet connection it will enable wifi to connect if it has to.
i have noticed in the past with other ROM's as well that if your phone is in flight mode and you soft reset. as soon as activesync tries to connect and cant it will turn on wifi.
try this. turn on flight mode. soft reset. open active sync and hit sync. you'll see.
so for the record... this is not a dcd bug, but rather a windows mobile bug. wm 5 and 6. the best fix is to set it to sprint only or do the trick i stated above.
Are any of you running the HTC Home Plugin with the weather patch?
Because I installed it on my XV6800 and on a soft reset the WiFi was acting wacky. As if it was looking for a signal.
All I did to correct this issue was to disable automatic roam / download of the weather.
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
jjlwork said:
Well what I noticed so far is this, mostly happens after a soft reset, but sometimes it does it at random. Only happens when I have DCD 3.0.1, I am not seeing it with any other custom rom and I think I have tried them all. I have not had any roaming icons or the like and with telus customizations on you have two options for network, there is standard and automatic.
The only reason I hold on to it being dcd 3.0.1 is that no other version 3.35rom I've installed has done it, the ones I have installed off the top of my head are the stock sprint rom, DCD 3.0, 3.0.1, no2chem 5053, and two others that I can't remember as well as my own stripped down version of the stock sprint rom.
Click to expand...
Click to collapse
Did you have this issue with your Stock ROM?
I only ran the stock 3.35 rom for about a day but I seem to recall it happened then as well. I didn't think it was necessarily DCD's rom but was an issue with the new radio. I'll try the steps cody recommended and see if that does the trick.
llmo128 said:
i know what it is guy its wifirouter setting changes it makes all phones with this app will have the same deal!
Click to expand...
Click to collapse
Nor have I.
I just switched to sprint only, and after a soft reset, the wifi did not turn on as usual.
[email protected]$ said:
Did you have this issue with your Stock ROM?
Click to expand...
Click to collapse
No I did not, however I also did not have it on there very long. I flash often, and I am constantly tweaking, "My name is jjlwork have a flashing problem" lo
Interestingly enough I am able to reproduce by following cody's instructions with the flight mode -> soft reset -> activesync
Hi all,
Got a problem that I can't seem to find any suggestions on how to fix here on the forums.
My i-mate Jamin's wireless doesn't automatically detect wireless networks, and even when I specify the configuration manually, it won't connect either. So, there is no detection of wireless (the wifi does turn on alright), and the 'wifi on' tower icon appears, but doesn't try and search or connect.
I was starting to think this was a 100% hardware problem, but I found that if I try and create an ad-hoc network with my Jamin, other devices can see it. However, when actually trying to connect to the ad-hoc network, the Jamin still keeps trying to connect unsuccessfully.
This problem existed on WM5 (my original rom) and has still been the same on all WM6.1 roms I've used (ShadoW, iProphet etc).
Any suggestions on a software angle, or what to look for in terms of 'broken' hardware if I were to pull the device apart?
Cheers
try to update the ROM and the SPL, but be carefull
Thanks for the suggestion, but I've done both. I've got the HardSPL on my device, and I've got CloudyFa's WM 6.1 rom (and as I mentioned, I've tried about 3 other WM6 and WM6.1 roms too)..still no luck though.
It does, however, come up with the signal strength icon (like it can almost see the network) if you try and manually configure a network you know exists (eg my home network). It doesn't manage to connect to it though - just comes back and says 'unavailable'.
check if it is encrypted with WPA2. I think that version of cloudyfa is not compatible with that kind of encryption.
Zero|Cool said:
check if it is encrypted with WPA2. I think that version of cloudyfa is not compatible with that kind of encryption.
Click to expand...
Click to collapse
Definitely is only WPA here at home. Tried disabling it to no encryption, and likewise it doesn't work at my university (WPA) or at public wifi hotspots (no encryptions) or if you use WEP either. I've tried every setting on my router - and like I've mentioned, tried it in various other locations and routers...
Definitely something wrong with my device..but who knows what it is
RockDJ20 said:
Definitely is only WPA here at home. Tried disabling it to no encryption, and likewise it doesn't work at my university (WPA) or at public wifi hotspots (no encryptions) or if you use WEP either. I've tried every setting on my router - and like I've mentioned, tried it in various other locations and routers...
Definitely something wrong with my device..but who knows what it is
Click to expand...
Click to collapse
Try updating the radio ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
same problem here...never found a solution....
thycpt737 said:
same problem here...never found a solution....
Click to expand...
Click to collapse
Try a WM5 official ROM with a different Radio ROM.
l3v5y said:
Try updating the radio ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
Click to expand...
Click to collapse
Any suggestions as to the best version? I've upgraded from the base one to 2.20.21.
Also, how does the main memory go during this update (can't remember from last time I did it) - does it get erased / should I back things up?
Thanks
RockDJ20 said:
Any suggestions as to the best version? I've upgraded from the base one to 2.20.21.
Also, how does the main memory go during this update (can't remember from last time I did it) - does it get erased / should I back things up?
Thanks
Click to expand...
Click to collapse
Main memory should be fine, nothing is wiped.
As to the best version, I'd suggest trying a few, personally, I think 2.19.21 is the best, but that may just be me and my Prophet...
l3v5y said:
Main memory should be fine, nothing is wiped.
As to the best version, I'd suggest trying a few, personally, I think 2.19.21 is the best, but that may just be me and my Prophet...
Click to expand...
Click to collapse
Yep, main memory was fine. I've upgraded to the latest radio rom on that page, but still no luck.
So I've tried that one, your one was my original one (2.19.21) and my last one (2.20.21). Doesn't seem like it's a fix unfortunately..
Thanks for the help all the same. Anything else I could try?
Have same problem after I installed :touchflo 3d look.
RockDJ20 said:
Hi all,
Got a problem that I can't seem to find any suggestions on how to fix here on the forums.
My i-mate Jamin's wireless doesn't automatically detect wireless networks, and even when I specify the configuration manually, it won't connect either. So, there is no detection of wireless (the wifi does turn on alright), and the 'wifi on' tower icon appears, but doesn't try and search or connect.
I was starting to think this was a 100% hardware problem, but I found that if I try and create an ad-hoc network with my Jamin, other devices can see it. However, when actually trying to connect to the ad-hoc network, the Jamin still keeps trying to connect unsuccessfully.
This problem existed on WM5 (my original rom) and has still been the same on all WM6.1 roms I've used (ShadoW, iProphet etc).
Any suggestions on a software angle, or what to look for in terms of 'broken' hardware if I were to pull the device apart?
Cheers
Click to expand...
Click to collapse
Same problem here
Hey there, as I said befor I had the SAME EXACT PROBLEM (Vodafone S200 initial firmware - flashed several ROMS with no succes on wifi and finally decided to stay with bikertibi's 23102).
I think I somehow came across the solution (or the solution came across me) about the "when I turn on the wifi..."
It does:
1) look like its turned on as the upper icon appears and it says "on" on the display.
2) beeps the green led on the front speaker (or whatever is that)
BUT
It does not:
1) beep the radio signal (two waves) on the "wifi on" icon.
2) Find networks available
warning: my level of knowledge on PDA's is somewhere over the bottom limit so basically my interpretations of the solution will be more of that (interpretations) than it should be. So I beg for someone that knows what he's doing to try it and explain again.
Okay, after searching the unsearchable and MAKING SURE that it was DEF. NOT the USB cable, decided to give it a try to that icon "ADD NEW". That icon appears instead of the available networks, 'cause as I said my prophet wasn't detecting them.
So, I "added" a new one with ad-hoc (that is: tab on "add new", select ad-hoc, put a silly name and say yes to all) and then INSTANTLY and MAGICALLY (yes, Im THAT lamer) it all started to find networks all over the howse.
Other thing that might have been something on the process is that I was having my laptop with the wireless connected. At the first moment I connected the adhoc with the laptop but then tried to connect to another next door network with SUCCEED.
Finally, deleted the new added silly named network and it is still recognizing networks available.
PLEASE, SOMEONE THAT KNOWS ABOUT THIS, EXPLAIN IT WITH CLEAR WORDS!!!!
Hope it helps
Re:
Maybe you should check your network to see anything wrong with it...
There's nothing wrong with the network you guys. I've been having the same problem for over 3 years? Couldn't quite remember.
I STILL have my Qtek s200 with me now. Alive and kickin'. I still have a problem with my wifi. I can connect alright, and browse alright. BUT only if I'm 2 feet near my router. The reception is extremely poor 3 years back, still is extremely poor now. This is not a coincidence. I think something's wrong with our devices. Tried doing everything. cooked, uncooked, stock. original radio, ALL radio. Still the same. Same exact distance, the reception weakens after 2 feet. AND 2 FEET is way to short for WIFI browsing.
To add more that there is nothing wrong with my network at home:
1. got no password
2. I have a old Nintendo DS lite. Works Fine.
3. Got a Wii
4. Got an Old Xperia X1 (not quite old)
5. Wifey's on C905
6. Got a China Iped
7. Using an HTC HD7
8. My OLD MSI Laptop has WIFI connectivity.
9. My Sis got an Aino.
that's basically it, an everyday home WIFI activity connectivity. AS for my Prophet. Still looks black good. but still connects no good. everythng else connects fine though, beaming IR things, bluetoothing things. pretty much normal. All except WIFI.
3 years ago, I thought it was just me.
Hi Guys.
So I was finally able to get a cooked ROM on my Fuze using an older XP machine that I had. But now, after trying both ROMeOS and DCS, I'm not getting any 3G signal. What i do get at times is the hsdpa signal, but i don't actually receive it; none of the data services are working (internet, weather, youtube, etc.). Could someone please tell me how to get 3G on my Fuze?
EDIT: It seems like I am getting the HSDPA signal at times but its very tempermental
anyone have a solution?
djcaston said:
anyone have a solution?
Click to expand...
Click to collapse
In start>settings>phone>band do you have the auto in both drop menus on??
also try start>settings>connections>advanced network> in the HSDPA try to see which option is used. try to use 'enable HSDPA Only' or even disable it completely and see what happens.
had the same issue and this seemed to fix it.
Advanced Config Tool>menu>more settings>Comm manager - Add 3g to comms manager.
Open comms manager and switch 3g off > soft reset > switch 3g on > soft reset
Good luck
thanks ill try that out when i get a chance. what rom were you using?
EDIT: nvm saw it in your sig
did you run the network config wizard after flashing the rom?
it prompts (or detects) your country and operator and configures most things for you.
if it's not part of your cooked rom, look for it as a .cab
yea i ran the config but it still doesnt connect to 3g. I'm trying the suggested solution now
still not working....
I still cant run apps like cellular video and the youtube app. Youtube just wont load the vids, and CV gives me a message that says it's only supported to 3G phones. I really hope theres a solution to this since I really love ROMeOS but I want apps like youtube and CV
haha i give up. I officially ***king hate this. I feel like I spent 300 bucks on a phone that is perfectly engineered and has crap software on it. Im so agitated i can't even think straight. I'm really close to just getting rid of this phone and i dont even know.
Well... felt good to tell someone.
I am having the same problems. I am using an ATT Fuze and I flashed ROMeOS last night and now I cant to connect to the internet or use the youtube app via HSDPa/HSUPA, 3G, or Edge. I can use these applications if I turn on Wi Fi, but if I use cellular internet I get a big red sign that says "ERROR" and then followed by "the remote server refuses to perform the request. This address is not available". It also shows an H on the top bar if anyone was wondering. Any fix for this or just try a different ROM?
Update: I tried a new ROM and same thing. Does anyone have a solution? I am sure us two aren't the only ones with this problem!
I am getting pretty desperate, can anyone help?
same problem here, my area supports hsdpa but with a speedtest i have between 24 and 36kbit
whenemusattack said:
I am having the same problems. I am using an ATT Fuze and I flashed ROMeOS last night and now I cant to connect to the internet or use the youtube app via HSDPa/HSUPA, 3G, or Edge. I can use these applications if I turn on Wi Fi, but if I use cellular internet I get a big red sign that says "ERROR" and then followed by "the remote server refuses to perform the request. This address is not available". It also shows an H on the top bar if anyone was wondering. Any fix for this or just try a different ROM?
Update: I tried a new ROM and same thing. Does anyone have a solution? I am sure us two aren't the only ones with this problem!
Click to expand...
Click to collapse
go to start>settings>Connections>Advanced network>GPRS "make sure CHAP authenticaion is selected. that is what ATT network uses. then go to Start>Settings>Connections>Connections> select manage existing connections and then go to the proxy tab. make sure your remove both check marks and you should be good to go.
Wow, thank you HackMimic that worked! I tried everything I could think of and was about to go back to stock ROM just to use 3G, but now I can continue using flashed ROMS. To the original poster of this thread try the above and it should work as I had the exact same symptoms you described and now I am cruising along on HSDPA! Once again thanks HackMimic!
no problem. i had the same issue back in the day when the connection setup app first cam out i noticed that it always seem to set the GPRS Settings to PAP instead of CHAP which is needed for MMS and the net over here in america. also noticed issues with proxy selected. glad i could help.
Yea I tried HackMimic's fix but not directly from you . I was reading on how to configure skyfire and they said to do that, and what ended up happening is all of the sudden the youtube app worked and so did everything else. Regardless, thanks for the solution. I'm a little more amazed everyday by the wealth of knowledge on this forum
Hi everyone,
I've been running a WM6.5 ROM lately, and the stability was great - less crashes, hardly any problems with the device just turning off... but it was extremely slow because most of the RAM was used just for running the system.
So I went back to a WM6.1 ROM, and I noticed that the device was freezing in standby mode when left alone for a while - the screen won't turn on any more... apparently the CPU locks to 100% when the freezes happen, because after a restart the battery is drained to 50% (from 100%!) and the device is very hot. This used to happen on other WM6.1 ROMs as well...
Any idea why this is happening? Why only on WM6.1 ROMs? Is my device just ****ed up? Or am I doing something wrong?
same with me.. ..but i think that my device haw this freezing on sms receiving, sometimes it vibrate without stop. ..
Do you use BatteryStatus by any chance? I've just uninstalled it on a whim and so far no crashes. Won't be able to tell for sure until in a few days though...
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
Prophet doesn't have 3G.
bemymonkey said:
Prophet doesn't have 3G.
Click to expand...
Click to collapse
read the post fully he is saying select what your phone supports
Did you try suggestion in post #4 ?
Just might be the answer your looking for
So how would I have gone about selecting something that my phone doesn't support in the first place?
As far as I can tell, there is no possible way I could have set my Prophet to use 3G
Oh and by the way, your ROMs are great and all, but using the comma, period and Shift key every now and then will make what you're trying to say a lot more easy to understand...
As for the problem itself - I've just reinstalled a completely blank ROM (one of dioxda's) and only sync'd my contacts and appointments - NO third-party software whatsoever. And looky here, no crashes. Now I can install one app per day and see which one causes the SODs...
bemymonkey said:
As for the problem itself - I've just reinstalled a completely blank ROM (one of dioxda's) and only sync'd my contacts and appointments - NO third-party software whatsoever. And looky here, no crashes. Now I can install one app per day and see which one causes the SODs...
Click to expand...
Click to collapse
I understand what you are saying on the HTC Tytn II and HTC Touch Diamond 2 the phones I had the Standby of Death with it was due to the phones network/band type being set to AUTO 3G/2G, changing this setting to either 3G only (WCDMA + UMTS 2100) or 2G only (GSM + AUTO) solved the problem completely.
In your case its most probably due to something you've installed which is a lot easier to solve, I suppose when you look in your phones network type setting GSM is the only option and the band is probably already set to AUTO.
I didn't know the Prophet did not support 3G before I posted this, on all phones that support 3G with this problem my solution often solves the problem but it can happen because of certain software installed also.
Hi
Since last update (9 dic) everytime I restart the phone I can see the 3G icon on the systembar but the 3G data connection is off on settings.
I have to set the 3g data connection on and then off to make the 3G icon disappear.
With the 3G setting off I reboot the phone and the 3g icon is back again ...
Any one is having the same problem ?
Thanks Iosu
How did you turn off 3G? Did you just turn off "Data Connection".
I am trying to figure how to do it on me AT&T HTC Titan.
http://forum.xda-developers.com/showthread.php?t=1383198
nemets said:
How did you turn off 3G? Did you just turn off "Data Connection".
I am trying to figure how to do it on me AT&T HTC Titan.
http://forum.xda-developers.com/showthread.php?t=1383198
Click to expand...
Click to collapse
yes I turn off data connection
I think your issue is different
Hello Iosub,
The 3g icon could be just indicating that you are using the 3g voice ( not the data). On my old Nokia's they would show the 3g icon even though I never used data.
Hello nemets,
Unfortunately not all the carriers allow the 3G connection setting in their Cellular setting. Though the option does exist as evidenced by the How-to Cellular settings page on the Microsoft website.
lavieest said:
Hello Iosub,
The 3g icon could be just indicating that you are using the 3g voice ( not the data). On my old Nokia's they would show the 3g icon even though I never used data.
Hello nemets,
Unfortunately not all the carriers allow the 3G connection setting in their Cellular setting. Though the option does exist as evidenced by the How-to Cellular settings page on the Microsoft website.
Click to expand...
Click to collapse
thanks for your answer.
i don't think that is the issue.
1. Because when i go to settings the data connection is off
2. Because if I turn on and the off the data connection the icon disappears
3. Because this was not happening with firmware 1.08 this is new with version 2.1
i think is a bug with the new firmware , lets see if someelse has the same problem..
Thank you
found a fix
I have found a fix.
I have turn on flight mode and reboot.
then I have turn off flight mode and reboot
I have reboot 5 times and no more 3g icon on startup. Only if I have the data connection on prior reboot witch is the correct behavior
hope is no back again
Iosu
I've noticed strange behavior with 3G (H) indicator.
Sometimes the icon appears even with Data Cellular off, I also see that restart behavior.
Will try the Air Plane mode trick and see if it solves this ODD thing.
What I don't understand is: why in the H**** this is done by firmware? Shouldn't this be controlled by the OS?
PS: when Cellular Data is OFF, even if the icon is in the screen, there is no connection working.
[]'s
Pimentel
cpimentel said:
I've noticed strange behavior with 3G (H) indicator.
Sometimes the icon appears even with Data Cellular off, I also see that restart behavior.
Will try the Air Plane mode trick and see if it solves this ODD thing.
What I don't understand is: why in the H**** this is done by firmware? Shouldn't this be controlled by the OS?
PS: when Cellular Data is OFF, even if the icon is in the screen, there is no connection working.
[]'s
Pimentel
Click to expand...
Click to collapse
I was having the same issue.. After my trick it has been fixed.. try it
also. now my batery live is longer
Iosu
I also noticed this bug, once yesterday and twice again today.
However, I couldn't identify what triggers the issue, it seems to be happening out of the blue on my phone.
At first I thought I've fixed it by turning cellular data on/off but that proved to be only a temporary fix (as it occured again).
I also agree the issue has an impact over battery life. Usually my battery drains very slowly overnight (~2%) but last night it drained 10%. I examined the Battery Status graph and it clearly showed the battery drain going down abruptly around 5 o'clock.
I will try the airplane mode fix and report back.
UPDATE
I tried it but didn't work, maybe I didn't do it right:
- turn cellular data ON
- turn flight mode ON
- reboot
- turn flight mode OFF
- reboot
- turn cellular data OFF
After a few hours, the H icon appeared all of a sudden on the status bar...
the issue is back
Now the trick does not work :-(
Time to find a way to fix it
HTC response is to reset.. Why in the hell they always give the same answer ?
Iosu
Hello,
My Titan has this problem too.
I have made the "Airplane" solution but since yesterday the 3G icon appeared again.
Any solution for this or should I reset the phone?
Thanks
Santos
Another Trick
Hi
I have found another trick.
step to fix
1.- Set DataConnection ON
2.- Go to a place where you lost the antena coverage connection completly, example a garage
3.- Go to DataConection turn OFF
Now move to a place with Antenna coverage
you will see that there is no more 3g/h simbol.
Hope this helps
Hi to all,
Unfortunately I ve got the same annoying problem after the last update through Zune. Hope this trick works,but maybe a permanent solution is another HTC update to correct this bug...
The above trick worked for almost 24 hours,now the bug appeared again. Thanks for your help anyway. One question please : what if I hard reset the phone? That means no more updating through Zune? Thanks in advance and Merry Christmas!
mdcharis said:
The above trick worked for almost 24 hours,now the bug appeared again. Thanks for your help anyway. One question please : what if I hard reset the phone? That means no more updating through Zune? Thanks in advance and Merry Christmas!
Click to expand...
Click to collapse
You can Hard Reset your Titan the times you want You have always access to further updates, no problem with that.
The problem is that if the Hard Reset solves the problem...
Thank you,
José Santos
---------- Post added at 02:51 PM ---------- Previous post was at 02:48 PM ----------
Hello,
Did anyone tried to make a Hard Reset to see if this problem disappears?
Thank You,
Santos
I guess that hard reset may be the solution since the bug came up after the last update.
I think I m gonna try it.
mdcharis said:
I guess that hard reset may be the solution since the bug came up after the last update.
I think I m gonna try it.
Click to expand...
Click to collapse
I think that I will try too.
Later today or tomorrow I will put information if it solved the problem.
Thanks
Hello,
Just did a Hard-Reset on my Titan and the problem continues.
HTC must see this for sure.
Thanks,
Santos
zeka1974 said:
Hello,
Just did a Hard-Reset on my Titan and the problem continues.
HTC must see this for sure.
Thanks,
Santos
Click to expand...
Click to collapse
hi
Report to HTC support, we all have to report if we want them to fix it
Thanks
I have already report it to HTC Greece,they have not replied yet...I'll also report it to HTC international support. By the way, I have not mention any effect on battery life or any other function. It is just annoying...
Thanks
---------- Post added at 10:01 PM ---------- Previous post was at 09:54 PM ----------
It looks like a Mediterranean bug... Spain, Portugal and Greece!
Just kidding...
Greetings to all.