I'm new here!
I had upgraded my Atom Rom to Atom Exec Rom (Chinese Rom 0721) weeks before.
Firstly, it ran faster, stable and seemed nothing wrong.
However, when detached the battery and then reinstalled, the nightmare appeared -- screen flicked, system unstable.
Then I tried to downgrade the rom, but error found even it was in Boot loader Mode. Someone suggested to copy "Eboot.nb0" into SD card and restart the device in Boot loader. It should then allow to downgrade any Rom.
However my story is ...
I copied, not only, but ALL files extracted from Rom (0426) into SD card and then restarted in Boot loader. The device loaded something and then reboot automatically. From that time, I no longer enter the Boot loader mode.
Every time I press CAMERA + RESET, my Atom just RESET and REBOOT. CAMERA button worked when in WM5. I don't know why.
I guess the Boot Loader Mode has been deleted or corrupted.
Can somebody help?
Thx.
Try this .. link.
http://forum.xda-developers.com/showthread.php?t=314896
jeffkewin said:
Try this .. link.
http://forum.xda-developers.com/showthread.php?t=314896
Click to expand...
Click to collapse
Thanks Jeffkewin. I will try leaving my Atom without the battery for a long period.
Related
I've tried a search but couldn't find anything that'd help me so...
I've just flashed my phone and it completed fine, rebooted and stuck on the first splash screen. Tried a soft reset and it stuck on the Windows Mobile splash screen, 5 mins later it's still there...
I've got HardSPL7 installed, so how can I flash the previous Rom I was using back onto the phone?
Ta
Off to have another search while I wait
Copy your chosen ROMs .nbh file to the root of your SD card and rename it to hermimg.nbh. Reset device in to bootloader and it should detect the hermimg.nbh and instruct you to press ther Power buton to update. Sometimes you need to go into bootloader a few times before it picks it up.
See WIKI here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
It is a good thing you have HardSPL v7 installed.
When this happened to me a while back, the best way to recover for me was to extract and copy the OS's .NBH file to the root of my SD card (formatted as FAT32) and naming it HERMIMG.NBH.
If you go into the boot screen (Pwr + OK + SR), you will get a prompt to start flashing the image. After the flash, my device was OK.
I am now using this method every time I flash my OS.
EDIT: Seems Maaron beat me to it.
Thanks guys, now re-flashing to my previous rom.
Was surprisingly easy
Yeah it was lucky I've got HardSPL, glad I put it on
Again ta for the hlep
I first used the SD method to fix a bad flash but now I use it evey time. It seems to flash much quicker this way and it doesn't matter what OS you have on your PC, whether you have incompatible USB controller, version of Activesync etc etc...
Had to do the radio the same way as it still wouldn't boot, but now back in action.
Ta
Good thread w/ information. I too am glad that I flashed HardSPL on my device as well
Out of interest, does the SD card have to be blank except for the image? Or can I just bung the .nbh on there and flash with loads of other stuff on the card?
Ta
The WIKI mentions to copy the nbh file on to a blank SD card but I have found it to work on my card containing numerous files and folders as long as it is in the root of the card.
I have tried that wicki (I was using schnaps and it has for some reason failed on booting after 2 weeks working fine...)
When i press the ok, power and reset buttons it takes me to a screen with red/green/blue/white bars (4 of them) showing
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro
I have done a flash of the SPL to http://www.mrvanx.org/cms/index.php...ask=view&id=38&Itemid=26&limit=1&limitstart=2
I did this and it said it was successful 2 weeks ago!
What can I do? Help!!!
EDIT: Did a hard reset by pushing the button above the start button, button above the ok button and hitting the reset with the stylus. This seems to have fixed the issue, but what worries me is that apparently hardspl v7 is not on there! :|
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
try a hard reset. turn the phone off, hold down both volume buttons, and turn the phone on, keeping the vol buttons held down. then when prompted,press vol up to reset it.
yes, you'll lose any data and modifications on your phone, it will be back to how it was right after you flashed it, but at least it will start up. better than how it is now, right?
nishankyadav said:
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
Click to expand...
Click to collapse
What an utterly unfortunate situation!! Couple of questions/remarks:
1. Did you install HTC 3.14 ROM with your S/N from HTC's website before flashing Artemis?
2. You already removed HSPL, so I would advice to extract the 3.14 RUU file to your desktop and copy the custom.nbh file to your SD Card after having it renamed to leoimg.nbh (insert SD CArd into PC to do that).
3. Reinsert SD card in device and enter bootlader mode and the installation of 3.14 should start automatically.
4. After that download Artemis 43 and extract it to the folder where you're SSPL_RUU,exe resides. Bothe the custom.nbh and the SSPL file must be in the same folder!
6. Start SSPL_RUU and flash Artemis
7. After that first a hard reset and then a soft reset.
Also read page 1 - Flashing notes
This should to it for you,
regards, Kuzibri
P.S. I posted this also in Artemis thread
same problem
i've got the same problem, but i didn't install the rom artemis,
i restart the installation many time but i've got always the same problem
the display showing loading..... please wait with the chucky logo.
someone can help me???????
thank you
Hi..I am new to this android thing and i have a problem.
My phone was recently stuck at the lg logo when i turn it on..i waited but it didn't boot..sa i decided to use KDZ to flash it with an original firmware at 10a..It all went ok..After finishing i again booted my phone but i got stuck at the green circle logo of android..I tried again but still the same..
I also noticed that isn't it that the android logo should be a in pure wordings if its the original firmware and not the green circle with an android word below it?
Guys I've found one original firmware that eventually worked..it's the vodafone v10q..I tried to flash it with KDZ and my phone booted to the desktop screen..
However i can't root it anymore and every time i try to downgrade it the boot loop recurs again..One more thing that puzzles me is that the applications that i previously had in my prime v2 was there..It seems like it wasn't totally flashed..
help me pls! i'm puzzled and i don't know how to root it anymore..
By the way i was previously using prime v2..due too my foolishness, I insisted on flashing a circular battery theme made for void..After rebooting, that's the time i experienced the boot loops..
I dont know if this is possible but u can try,
While setting partition, set 0 mb ext and format sd then repartition with ur required size and flash the rom.
ccdreadcc said:
I dont know if this is possible but u can try,
While setting partition, set 0 mb ext and format sd then repartition with ur required size and flash the rom.
Click to expand...
Click to collapse
i just tried formating my sd card and repartitioning it with an ext2 of 620 mb but when i mounted it to my phone it wasn't recognized anymore..i formatted it with fat 16 system
this is the last line in the kdz log before the word finished: OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
take out the battery, put it back in then press HOME+VOLUME UP+POWER that should put you in recovery mode and should boot up fine after that.
Omnichron said:
take out the battery, put it back in then press HOME+VOLUME UP+POWER that should put you in recovery mode and should boot up fine after that.
Click to expand...
Click to collapse
i'd try this..
Omnichron said:
take out the battery, put it back in then press HOME+VOLUME UP+POWER that should put you in recovery mode and should boot up fine after that.
Click to expand...
Click to collapse
wow..it did work!..great..thanks
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
crandroid99 said:
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
Click to expand...
Click to collapse
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
Click to expand...
Click to collapse
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
xaocot said:
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
Click to expand...
Click to collapse
This update was seven months ago. It did not claim to bring 6.0, just minor fixes.
Thank you for clearing that up, now I just have to figure out how to download and use it xD.
Also I have figured out how to enable the hidden administrator account in Win10 and use that to get around the security warning, still tries to boot partway through flashing. Unless there's some other part of Win10 that's disagreeing with it.
Sent from my ONE A2005 using Tapatalk
the same problem with me!
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
plz someone too guide me ,the same problem is happening but there is no appearance of a loading screen,when i switch on the tab ,it showws the lenova logo and goes to a black screen thats keeps on flahsing!! i dont knwo what to do ,when i connect to pc and try to flash it doesnt work,i dont what to do plz help me!!
Click to expand...
Click to collapse