Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
koenie said:
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
Click to expand...
Click to collapse
My problem is same to you ,
Any one can help?
leeleeguo said:
My problem is same to you ,
Any one can help?
Click to expand...
Click to collapse
which bluetooth stack are you using?
toshiba?
gokhanmoral said:
which bluetooth stack are you using?
toshiba?
Click to expand...
Click to collapse
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
leeleeguo said:
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
Click to expand...
Click to collapse
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
gokhanmoral said:
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
Click to expand...
Click to collapse
It's ok,also need to del the unused serial port
Thank you
Hello
I've managed to select the incoming port in Activesync to COM6
and set the outgoing port on my S200 to COM6
but the pda is reporting that he doesn't find a computer that supports Activesync, although they are paired
I'm using the Widcomm stack
the widcomm program is reporting these 3 services are available on the pda:
- Connect NPA & Dialup & voice Gateway, serial port is not one of them
Related
Does anybody connect to internet from PC thru wallaby GPRS by USB ?
Ive tried almost everything , wmodem with USB option, my PC didn't recognize new device, also HTC USB Modem driver do not shows under windows add modem.. huh .. I almost giving up, if somebody have a sollution please help.
cnupo said:
Does anybody connect to internet from PC thru wallaby GPRS by USB ?
Ive tried almost everything , wmodem with USB option, my PC didn't recognize new device, also HTC USB Modem driver do not shows under windows add modem.. huh .. I almost giving up, if somebody have a sollution please help.
Click to expand...
Click to collapse
First, make sure you mobile has connected to your pc thru usb.
"At the PC side"
next, open Microsoft ActiveSync, open menu File->Connection Settings...
and, make sure 'Allow usb connection' is checked, and the value of drop-down list 'This computer is connected to' is either 'Automatic' or 'Internet'.
"On the Mobile"
I am not sure the exact words in English edition, as my mobile is Chinese edition. So i will try to use the words which fit into the meaning that they described.
Start->Set up(maybe Setting)->Connection tab->Connection.
make sure the value of drop-down list 'Network Adapter is connected to' is 'Internet'
so, everything will be fine.
hope you enjoy it.
it's not working
On your PC
// -- Microsoft ActiveSync --//
"File"->"Connection Settings" ->
(1) check 'Allow USB connection'
(2) 'This computer is connected to' -> 'Internet'
// -- On your device -- //
"Start"->"Setting"->"Connections" tab ->
(1) "Connection" -> "Advance" tab -> "Select Network"
-> the options for "Programs that ... the Internet should connect using:"
choose the option "My Work Network"
(2) "Network Cards" -> "My Network card connects to" -> "The Internet"
(3) "Network Cards" -> "Remote-NDIS Host"
Select "Use server-assigned IP address"
// -- Now test your connection before trying the option below -- //
If "Use server-assigned IP address" above doesn't work use
"Use specific IP address"
IP address: 196.254.2.2
Subnet mask: 255.255.255.0
Default gateway: 196.254.2.1
// -- How to test your connection -- //
- Unplug your USB cable (if it is plugged-in when you change the setting)
- Plug your USB cable
- Wait for your activesync to complete.
- Use IE in your device to test connection
ps: Some software (i.e. WorldMate) doesn't seems to work even I have connection on other sofware (i.e. IE).
my dopod 818 pro cant connect to my laptop using bluetooth serial port.can anyone who is familiar with this way help me ?
i can detect my laptop n followed all the direction in activesync's help note but it still cant connect..im receiving a message saying that d COM port that ive chosen is used by other application...i checked it again n again but none is using them..please help,...
ADDITION :
ive been searchin thru out xda wiki about upgrading n flashing roms..n i got some questions that are still not answered n confused
1. if want to flash my locked g4 prophet with other roms, what TOOLS/software should i prepare in advance ?
2. is flashing roms like reinstalling PC with different OS ? n i will lost the files in d main memory ?
3. n i cant find d download section in xda developers...
anyone kindly pls help me thanks
for two days I finally got my bluetooth-activesync to work, which just wouldn't want to work in the past. remove the bluetooth dongle, search google for a howto about how to make old devices visible inside the windows device manager, remove everything bluetooth related, com ports, the devices and the network related stuff. then reinstall the bluetooth dongle, let windows install all the driver . when this is finished you can follow the procedure described in the activesync helpfile about how to create an outgoing com port etc.
you should be just fine, as I said I could never make it work until I cleared out all the junk that windows likes to collect and carefully hides from you ;-) thats windows folks.
hope this will work for you,too.
thanks for the message, but i cant find the article on google..im using a built in bluetooth btw.....can u PM me with the directions ? really appreciate it if u can help...
To the Guy with the bluetooth sycronization problem. yes it does work on the s200. I am using it now.
Here is how to do it for windows XP.
1.disconnect your phone from your pc if it is connected.
2. Find the bluetooth icon in the windows control panel and open it.
3. Under the device tab if you see your phone delete it.
4.under the Options tap check the turn discover on box. The other 3 should already be checked.
5.go to the COM Ports tap and click add.
6.select Incoming (divice initiates the connection ) and click ok.
7. Look at the the com port # given in the table. And write it down.
8. Click ok and close the bluetooth devices window.
9.right click the ActiveSync icon on
Your system tray and click on connection settings.
10.check the allow connections to one of the following check box. And in the drop down right below it pick the same com port as the one you had written down.
11. Click ok to close the connection settings window
12. Open activeSync on your phone. (i made a short cut to it in my start menu.)
13. Click menu and click on connect via bluetooth.
14. You mite be asked to make a bluetooth partnership on your phone. Click yes.
15.click new partnership on your phone. Then click your pc from the list when you see it.
16. Then click next.
17. Enter a pass key on your phone.
Click the bluetooth icon on your pc and enter the same pass key.
18. Click next and finnish on your pc and when asked do the same on your phone.
19. Now it is set to setup to use activeSync via bluetooth.
20. To use it. open activeSync on your phone. Click menu and click connect via bluetooth. That should get you on.
G40 said:
To the Guy with the bluetooth sycronization problem. yes it does work on the s200. I am using it now.
Here is how to do it for windows XP.
1.disconnect your phone from your pc if it is connected.
2. Find the bluetooth icon in the windows control panel and open it.
3. Under the device tab if you see your phone delete it.
4.under the Options tap check the turn discover on box. The other 3 should already be checked.
5.go to the COM Ports tap and click add.
6.select Incoming (divice initiates the connection ) and click ok.
7. Look at the the com port # given in the table. And write it down.
8. Click ok and close the bluetooth devices window.
9.right click the ActiveSync icon on
Your system tray and click on connection settings.
10.check the allow connections to one of the following check box. And in the drop down right below it pick the same com port as the one you had written down.
11. Click ok to close the connection settings window
12. Open activeSync on your phone. (i made a short cut to it in my start menu.)
13. Click menu and click on connect via bluetooth.
14. You mite be asked to make a bluetooth partnership on your phone. Click yes.
15.click new partnership on your phone. Then click your pc from the list when you see it.
16. Then click next.
17. Enter a pass key on your phone.
Click the bluetooth icon on your pc and enter the same pass key.
18. Click next and finnish on your pc and when asked do the same on your phone.
19. Now it is set to setup to use activeSync via bluetooth.
20. To use it. open activeSync on your phone. Click menu and click connect via bluetooth. That should get you on.
Click to expand...
Click to collapse
Thanks man. Now it works .
G40 said:
To the Guy with the bluetooth sycronization problem. yes it does work on the s200. I am using it now.
Here is how to do it for windows XP.
1.disconnect your phone from your pc if it is connected.
2. Find the bluetooth icon in the windows control panel and open it.
3. Under the device tab if you see your phone delete it.
4.under the Options tap check the turn discover on box. The other 3 should already be checked.
5.go to the COM Ports tap and click add.
6.select Incoming (divice initiates the connection ) and click ok.
7. Look at the the com port # given in the table. And write it down.
8. Click ok and close the bluetooth devices window.
9.right click the ActiveSync icon on
Your system tray and click on connection settings.
10.check the allow connections to one of the following check box. And in the drop down right below it pick the same com port as the one you had written down.
11. Click ok to close the connection settings window
12. Open activeSync on your phone. (i made a short cut to it in my start menu.)
13. Click menu and click on connect via bluetooth.
14. You mite be asked to make a bluetooth partnership on your phone. Click yes.
15.click new partnership on your phone. Then click your pc from the list when you see it.
16. Then click next.
17. Enter a pass key on your phone.
Click the bluetooth icon on your pc and enter the same pass key.
18. Click next and finnish on your pc and when asked do the same on your phone.
19. Now it is set to setup to use activeSync via bluetooth.
20. To use it. open activeSync on your phone. Click menu and click connect via bluetooth. That should get you on.
Click to expand...
Click to collapse
Thank you. It works on my TD2.
I was looking for a way to do quick GPS when I am on a trip in a hotel room with cabled internet connection only.
Hi Guys, I just took my old XDA2 out of retirement (it died as I broke the sim card reader) And decided I want to use it as an about the house Internet Browser and possibly media player.
I know what software to put on it to make it do what I want but I'm stuck with getting it to to connect to the net
I have tried several ROM's (I hate the official o2 rom just because of all the crap) I like the WM6 ROM as it is the latest software But when I put it back into my cradle it comes up unrecognised and wont sync with active sync.
I cant get it to sync over bluetooth either? I can pair it with my PC via bluetooth but cant synch it. As I have windows Vista I am trying to sync with windows mobile device centre and still no joy. personally i dont care f it does sync but I'm sure I need it to so that i can browse the internet on my xda????
Now I'm stuck... do I flash it with an older ROM in the hope it will start to sync with one of my 2 PC's (It really needs to work with the vista PC)
Or is there another way I can set this up regardless of the rom so I can have some kind of local bluetooth network where I can access the net and my PC via the XDA2?
I would prefer the latter as I can Use the newer WM6 ROM.
my xda2 sync just fine over bluetooth
i set the xda2 in descoverymode and add it from vista bluetooth setup
and the xda2 see the vista pc and let me add it and then
in activesync on the xda2 i pick sync over bluetooth
otherwise you can take a look at this
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
I have a lot of problems with sync over bluetooth, but my reason is really simple, I turn off microsoft firewall on my PC with WinXP and It is work fine..I can be on net and icq...
Internet over activesync???
Hi, is there a way to connect my xda to internet over activesync?
unless you have disabled it on the pc or on the pocketpc
your pda is always connected to the same network internet and otherwise when
connected to activesync
can u teach me how? after disabling connection from the pc, wat will i do nxt?
"can u teach me how? after disabling connection from the pc, wat will i do nxt?"
hhmmm at no point did i tell you to disable connection from the pc.....
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
Ei man, kinda misunderstood it. sorry. I'll try it later. BTW, u know how to upgrade wm2003se to wm5 or wm6? can u teach me step by step how to's? or possibly know a clear steps by steps procedure threads?
this is a copyPaste directly from the file in all the roms called READMEFIRST.txt
"Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe (or HimaUpgradeUt_NoID.exe if flashing on any Himalaya other which is from than O2)
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES"
Ei man, thnx, ur advice work with activesync.
Now having prob. with upgrading stuff. cant find any ROM, can u suggest one? is wm2005 1.50 ok??? bTW, i have 02 xda II with wm2003se.
Ei myt, got a question.. u know where can i find the .exe file for on/off button???
i can sync my hima on both connection (bluetooth and USB) but the difference is:
i can only access internet through bluetooth connection but when pluging or sync in it on a cradle..internet connection stops (or no connectivity on the net)..
can somebody help me with my problem?..thanks
in newer roms under settings->connection there is an shortcut called
usb to pc
make sure the checkbox there is checked
Rudegar said:
in newer roms under settings->connection there is an shortcut called
usb to pc
make sure the checkbox there is checked
Click to expand...
Click to collapse
i have a newer rom..and the box is checked..and nothing happens..any solution?..
Hello people,
As everyone knows, there are people who cant connect the new Roms with ActiveSync, for those who cant, we will post here the rigth ones.
Let´s go guys, let's do some work for us... and encourage the people to cook for us too!
The Roms tested:
BD's v5 (Blackdragon) - Thanks mkoch5 for test it.
Best Regards
have u tried this?
1. Keep the WM device connected.
2. Go to Start > Start Search.
3. Enter Device Manager or devmgmt.msc to launch the Device Manager window.
4. Look under the Network adapters node for Microsoft Windows Mobile Remote Adapter. If this is not present, skip to step 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter and choose to Uninstall.
5. Look under the Mobile Devices node for Microsoft USB Sync. If this is not present, skip to step 6. Otherwise, right-click Microsoft USB Sync and choose to Uninstall.
6. Disconnect and reconnect the WM device. The device driver for the PPC Phone will re-install and Windows Mobile Device Center will launch.
exakt said:
have u tried this?
1. Keep the WM device connected.
2. Go to Start > Start Search.
3. Enter Device Manager or devmgmt.msc to launch the Device Manager window.
4. Look under the Network adapters node for Microsoft Windows Mobile Remote Adapter. If this is not present, skip to step 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter and choose to Uninstall.
5. Look under the Mobile Devices node for Microsoft USB Sync. If this is not present, skip to step 6. Otherwise, right-click Microsoft USB Sync and choose to Uninstall.
6. Disconnect and reconnect the WM device. The device driver for the PPC Phone will re-install and Windows Mobile Device Center will launch.
Click to expand...
Click to collapse
I´m using the activesync 4.5 in windows XP. I can connect the Niki while i´m using older ROMs, but newest, i cant.
regards
can´t help but same with my Niki100
Michael
Please Guys, can anyone cook some ROMS with the old active sync function for those who can´t connect with computer?
Best Reagards
I tried the same ROM on a NIKI200 (the other one is a NIKI100) and Active Sync works perfectly
Someone knows where the difference is between 100 and 200 ?
I have same problem on my XDA Star too. On newer rom (Phoenix and latest Lilly) can not connect with activesync
hmmmmmm flashed the NIKI100 again ...and now it works with Activesync
and also in FAST Mode
Don´t know why ... but it works
Michael
Awsome!
What ROM do you used?
regards
I used BD´s V5 .... and it works ...nearly perfect
Michael
Anyone tested the New LILLY ROM v1.4.5 (Build 20757.1.4.0)?
Has anyone sollution about this problem????