Hi all,
i'm just about to flash my pda.. and i'd like to know if what i've done so far is correct:
first af all, my Qtek2020 is German, and the first OS was German. When i upgraded to 1.72.128 ITA i rembember i changed the language by using ER2k3 Edit..
now, i've downloaded SinMerged 1.x and extracted all the files.
then i've opened all of the 3 files (ext rom, radio and rom image) with er2k3edit and changed the "language" field from WWE to GER
i've also edited the field "Operator" and changed from O2 to Qtek
i wonder if it's correct...
Oh PS: btw do you know any program do backup SMSs? thx!
you can check what your qtek is now by running getdevicedata.
just to be sure it is a GER Qtek.
thanks for the advice..
i'll let you know asap
here's what i got:
Code:
U S B 3 2 1 . 7 2 . 0 4 I T A P H 1 0 Q t e k I T A 1 . 7 2 . 1 2 8 1 . 1 4 . 0 0
so language id is ITA :/
mmm i tought it was GER.. anyway.. is it correct to edit those fields on each of the 3 roms (radio, main and ext) ? or just on the main one?
thx again!
Edit on all three, I never tried otherwise.
some side information :
* All 3 upgrades (nk, radio,ms) have an operator and language which has to be the same as your machine.
* ms has also another operator and language your machine will change into when you upgrade
These are located on offset 74 and 94 in the decrypted MS_.nba
http://forum.xda-developers.com/viewtopic.php?t=12101&start=0
If you don't want to change the operator and language in your machine, for guarantee reasons, you should follow DCS's post about country code error.
Although downgrading to your official rom might also be possible if you modify its headers with ER2003Edit. But sometimes a downgrade is no longer possible before claiming guarantee.
I just downlaoded Himalaya_SE_2.06.00_Imate.zip from ftp and after running this I it started without any problem. But after installing, my ppc is not being restarted and just on initial screen.
Now the mistake which I made because I didn't read the whole article.
1. I have not get any device data using GetDeviceData
2. I also verified that on ftp, nk.rar was corrupted and because of this, it didn't give any country error and just installed radio file
3. For exact country, I can give it had some arabic software installed.
I am requestion all to help me asap.
Thanks
Shahzad Godil
Able to restore after getting orignal file from my freind.
U S B 3 2 1 . 7 2 . 0 0 W W E P H 1 0 C D L W W E 1 . 7 2 . 1 2 6 1 . 1 4 . 0 0
Hello everyone,
Searched a lot, but couldn't find a solution. Or did i miss somthing?
Ik have a Himalaya device. Upgraded succesfull to WM2003SE, and later to WM5. Really great, but hated the 'loss' of memory.
Now i've found a new WM5 ROM with memory
So i ran HimaGetDeviceData.exe and copied the DeviceData.txt to my pc and... the OperatorID is empty:
"U S B 3 2 1 . 6 0 a . 0 0 W W
E
1 . 1 0 . 0 0 "
Now i don't know how to change de operatorID of de NK.nbf. And when i just try to use HimaUpgradeUt.exe, i get the expected COUNTRY ERROR
Can i change the OperatorID of my device? Or is there an other solution? Or am i just doing something wrong?
Thanx in ahead!
I'm using pArtizAn's WM 6.1 Pro Rom, but this amazing Rom only supports xt9 for Russian and English. I'm a German and writing SMS without t9 really sucks!
So I was looking for a Language Pack like they exist for the Standard-Roms.
I found this Language Pack from MoDaCo. I installed it and - contrary to all other exisiting Language Packs - the t9-key was working and I was able to write with the dictionary, but the keymapping was totally mixed up!
Eg. my Hardware-Button 2 was mapped to 1, e & r (so if I wanted to type an r in the ABC-Mode, I had to press the HardwareButton 2 twice !)
Or if I wanted to write "test" with dictionary I had to press 3,2,6,3 instead of 8,3,7,8!
So I tried to copy only the 2 Files "hpd.5x4.German.kdb" & "DElsUN_xt9.ldb" from the cab to my windows-dir and I modified/created this 3 registryvalues:
"HKLM\Software\Tegic\eT9\IME\KDbFiles\0607" value = "hpd.5x4.German.kdb"
"HKLM\Software\Tegic\eT9\LdbFiles\0107" value = "DElsUN_xt9.ldb"
And appended on the 3 value (HKLM\SOFTWARE\Tegic\eT9\AvailableLanguages) ",0107"
After that, the keymapping was correct! But after selecting German in the XT9-Menu, it wasn't displayed in the XT9-Menu to be selected, but by typing with the dictionary the t9 suggested me some german words and by selecting them, the xt9-bar freezed and was visible everywhere until I did a softreset.
Let's simply say: It acted really confused!
My guess is, that this is connected with the file eT9.HQD.kdb
So. Is there any genius out who can help me???
post german language pack here.
i will add it in the next release, maybe.
Yes, please! I'd really appreciate that! Thank you!!!
XT9 German.zip:
The 2 language-files I suppose to be responsable for german.
Is this enough or should I try to upload the cab including Czech, Danish, German, English, Spanish, Finnish, French, Italian, Dutch, Norwegian, Polish, Portugese, Russian & Swedish ???
I had some troubles uploading this file - I guess my Connection is too slow (512 kbit up) and the server is getting into a timeout. But I can also put the file on my server and send you a direct download link via PM for this file (also tried to upload it via URL - no chance!)
When are we going to get the pleasure of a new wounderful release? I'm looking almost every day on this site to be the first downloader of the new release
Hi
Same Problem here... I hope Erofich can do this...
StefanV3
Med0ric0 said:
When are we going to get the pleasure of a new wounderful release?
Click to expand...
Click to collapse
In the middle/end of May, when i will get startrek.
Erofich said:
In the middle/end of May, when i will get startrek.
Click to expand...
Click to collapse
... So you are going to make me a birthday-gift
PS: Thanks for all your past, present and future work on this ROMs!!!
Hi
Yesterday i've played araound with the files from HTC Touch Dual. Is there anyone who can tell me how to edit key mapping??? The current keymapping is:
Code:
key letter/symbols
"1" !; w; q
"2" 1; e; r
"3" 2; z; t
"4" 3; u; i; ü
"5" .; o; ö; p
"6" ?; s; a; ä
"7" 4; d; f
"8" 5; h; g
"9" 6; k; j
"0" ,; l; s
The files are from http://forum.xda-developers.com/showpost.php?p=1672748&postcount=4 and the howto i used is here: http://forum.xda-developers.com/showpost.php?p=1946530&postcount=263
I know that these are files from HTC Niki that uses a 5x4 keypad but how to change to 3x4??? I couldn't find a 3x4 xt9 kdb file for pocket pc.
StefanV3
Hi
Thanks for mailing me. But there is no need to upload it because it is available here at http://melgurth.ovh.org/index.php?page=downloads .
But, could you tell us how to activate it??? I installed it but i don't know how to activate it. There is no menu entry...
StefanV3
Hi
@ husbender
Thanks, i will try it again. Did you really mean the '#' key??? In private message you told me that you holding down the '*' key. '#' key gives me the list with symbols...
Back to Topic:
I've played around again with the files from the XT9 lang pack from the first post of this topic. It should be that the problem is related to the kdb files that Erofich uses for english and russian xt9. It should be special ones for the qtek keyboard. Is this right Erofich??? Could you tell us how to develope a german kdb file???
StefanV3
Hi
Please send it...
Stefan
Thank you very much for your help, husbender.
But this t9 languagepack isn't working on my WM 6.1 Pro Rom. After the installation I'm only able to write numbers and I'm unable to open the t9 menu by pressing the *-key! So I've uninstalled it and everything went back to normal - without a German t9...
I'm looking forward to Erofichs new rom /w german t9 or someone who could remap the keys from the t9 shadow languagepack.
But thank you husbender!
I'm looking for Spanish xT9
Hi, does somebody have the file Spanish xT9 only?
because I found a international languages, but i don't need all the other ones.
Thanks
Hi
I just bought a samsung bkc 1B1 bluetooth keyboard, and I'm trying to use it with my galaxy tab 2 10.1 (p5110) with Cyanogenmod 10.1.1.
My problem is that is recognized as QWERTY keyboard, which it's not. So I decide to write a custom keylayout for the keyboard. First I searched for the vendor and product id :
Code:
$ : cat /proc/bus/input/devices
I : Bus=0005 Vendor=04e8 Product=7021 Version=0001
N : Name="Broadcom Bluetooth HID"
P : Phys=
S : Sysfs=/devices/virtual/misc/uhid/input9
U : Uniq=
H : Handler=sysrq kbd event8
B : PROP=0
B : EV=2001b
B : KEY=1f 0 0 0 0 0 0 0 0 0 0 10000 0 0 0 10013 2000007 ff9f307a c9405fff febeffdf ffafffff ffffffff fffffffe
B : ABS=f00 0
B : MSC=10
B : LED=1f
I duplicated Generic.kl and rename the copy "Vendor_04e8_Product_7021.kl". I tried to change a letter, but it seems the modification has not been taken into count even after a reboot.
I also tried "Vendor_04e8_Product_7021_Version_0001.kl" and "Broadcom Bluetooth HID.kl" but none of them seems to work.as well.
Is that normal ? How can I fix it ?
Mouarf said:
I also tried "Vendor_04e8_Product_7021_Version_0001.kl" and "Broadcom Bluetooth HID.kl" but none of them seems to work.as well. Is that normal ? How can I fix it ?
Click to expand...
Click to collapse
Try using "BroadcomBluetoothHID.kl" or "Broadcom_Bluetooth_HID.kl" instead.
Any update? Did you ever get this working? I'm experiencing the same issue. logcat shows that it never touches my custom kl file and just uses the Generic.kl. I can modify that file and my changes work fine, but that's obviously not the right solution. I'm working with a Nexus 7 stock Android 4.4.2 ROM. According to the documentation, this should work!
http://source.android.com/devices/tech/input/key-layout-files.html
Thanks