I don't get it, my sx56 has no sound at all , diagnostics audio work perfectly,once out of diagnostics it won't play any sounds,would this be a firmware or hardware problem knowing that i can't hear people callling me and they can't hear me either!
Any clues lads!!!
many thanks
check this http://forum.xda-developers.com/showthread.php?t=222433
ok , suppose that my XDA is like in this thread "grumble" which i doubt very much, why is it so expensive to repair.... 1500 dollars!!!
which piece of hardware has to be replace.what should i look for if i dismantle the beast?
thanks
right so i've done a bit of research on other wallaby forums, some units had the same problem and that was sorted by flash a new radio version, i might try this out, but i don't know how to do it or where to get one?
i'm currently running on the following:
ROM version:4.01.12 english
ROM date:12/22/03
Radio version:A.20.10
Protocol version : 324e4
any suggestion you geniouses??
cheers!
before you flash your wallaby make SURE! that you do it with the right type of radiostack 900/1800 vs. 900/1900 or you can brick it for good
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
http://www.yorch.net/
well i've manage to upgrade the radio version to 4.21.00 protocol32s54
but the GSM doesn't work anymore nor the sounds, and to top it all off i can't find the old radio version stated above, do i need a software to install it?
HELP!!!
A.20.10 Radio Version Needed !!
Has anyone got a link to download the above radio stack version as the one on
www.yorch.net doesn't come in exe file, or am i doing something wrong ?
many thanx GENIOUSES
Just unzip the exe and you should get the Files to run on the Walalby.....
Stefan
that's it problem sorted ! just realised that i had to put the RSu update in the windows file of my XDA.
Now i need to sort out the sound problem, if i got it right , at the moment i do not have any sound at all but if the headphones are working , does this mean that thhe fault is coming from the speaker and microphone,in other hands if the headphone isn't working then does that mean that it's the sound chip(UDA1341).
Or should i just change the lot full stop( sound chip, speaker and microphone) ??
many thanx
http://forum.xda-developers.com/showthread.php?t=225372&highlight=connector
minijack detect connector issue
Very nice thank you mate, but it doesn't tell me if my deductions are making sense, would changing the lot sort my problem?
many people have reported that their detect wiredheadset spring
in their minijack getting stuck so
the device believe there is a headset connected
all the time and will then not use the normal speaker at all
some report having it solved by inserting the 2.5mm minijack and pulling fast out a few times
others seem to have to resort to changing the connector which include the spring
so the fact that both speaker and microphone not working could be link to a faulty headset connector?
sounds like a suspect
well, that's it , sound problem sorted this morning!!!
i just used a 2.5 mm jack and played along with it and guess what!!
It 's working !!
At last a PDA fully fonctionnal!
many thanx to this great community!!
Related
Hi Folks~
I have an XDA (QTEK 1010) had been working perfectly fine, until yesterday. After taking a call, when I tried to make a call I noticed the Speaker Phone activated automatically. I can't hear anything even the tried to play an MP3 from the Media Player but still didn't work.
Then I plugged in the Hands-Free, could listen to the Sound but the Mic seems to be have been disabled. (Even after plug-in of the Hands-Free, the Speakerphone still remains activated).
Pl. HELP !
Thanks !!
the manual say something about holding down the phone button turn the speaker phone on and off
Doesn't work, I've already tried it
Btw am using the following, pl. let me know if the ROM/Radio Stack Versions have to do something with it
DEVICE : QTEK 1010
Model No.: PW10A1
ROM Version: 3.18.04 ENG
ROM Date: 05/22/03
Radio Version: 3.25.00
Protocol Version: 32S54
Thanks !!
You could back up your data and try a hard reset, a bit drastic I know but its pretty useless as a phone at the moment.
Apologies for the Information in Bit & Pieces (am a newbie).
I've already checked after Soft & Hard Reset to the Device, the problem is still there.
Regards
This is exactly what happened to me back in November, after my little Xavier (an XDA) went for a swim in a flooded gutter.
I'll bet that if you go into the Wallaby BootLoader and try the diagnostics, it'll behave itself.
Unfortunately, the news was not good for me: $1500 to have it repaired.
"Liquid Ingression", they call it. *grumble*
I decided against it. My XDA still works as a soundless PDA (or, as it turns out, a hopelessly overpriced Universal Remote Control).
deemacgee said:
I'll bet that if you go into the Wallaby BootLoader and try the diagnostics, it'll behave itself.
).
Click to expand...
Click to collapse
Can you guide me through ? How to run the diagnostics ?
Any help with the Diagnostics ?
I've tried over-writing the ROM, still didn't work ...
rana said:
Any help with the Diagnostics ?
I've tried over-writing the ROM, still didn't work ...
Click to expand...
Click to collapse
http://xda-developers.com/bootloader
Thank you!
Let me try it out .. :arrow:
Still not working ..
Should I upgrade it to PPC2003 from the YOrk Kitchen ?? Will it help resolving the problem ?
I was thinking if it could be bcz of a loose connection inside the device (altough the device never fell down since I've got it).
Any help would be appreciated.
Rgds/
There's a good chance that it needs vendor support.
Take it back to the place you bought it... if you didn't drop it or get it wet, the warranty should cover it.
Hope this helps. Good luck!
The problem is that there is no Local Support for XDA in Pakistan yet ...
The Only Option I've got is to ship it internationally, which would be Expensive :roll:
Just tried Updating the Stack, didn't Work either .. Pretty Strange what else could happen.
If I attach a Hands-Free I get to hear the Sounds, but no Sounds on the Speaker .. person calling me can't hear me nor can I hear them. The Situtation is same I try to make a Call "Speaker Phone On" Pops-UP.
Though I tried to records the Recording, When I speak while the recoding on the playback just gives a huffing sound, no clear Audio.
Stuck with an Expensive XDA with No Phone & No Speaker Sound !!!
From the limited information provided to me by the repair centre, and looking over the details on xda-developers.com, I think your audio chip (or something related to it) may have fried. Mine was caused by water damage... a lot of water damage, at that...
Without the Sound, there's no charm in using it anyways ... bought a new Nokia 6600 a few days back and am using it ... now waiting for the Battery to be drained & when re-charged expecting a miracle to happen
I hope it works again !! I love the XDA !
Guess What .. the XDA is working perfectly fine now.
The only thing I did was to place it in my Drawer for a couple of Days .. Keeping it outta my Sight )
Miracles do happen ;-)
I have this problem now... Although it has not got wet?? Exact same as described as above...
Although in bootloader diagnostics the mic/speaker work fine. When booted in to windows I get the speaker phone coming on automatically, and no sound
Guys,
This problem drives me crazy constantly. The only explanation I found (by empirical approach) as follows:
My XDA works fine always except at winter, when I stay outside, and the XDA surface covered with steam condensate because of temperature differences. Condensate may not be seen visually, but some electronics inside has short circuit or changes in chains resistance which cause XDA to think that ‘speakerphone mode’ is on and misbehave.
To resolve this problem I just keep XDA in the worm place (like stay in apartment) for 30 min and / or plug it to charger which bring XDA to normal mode (by warming it up and thus removing steam condensate). No other ways found so far.
Regards, Andrey
Let me know if you know how to resolve it once and forever (do not advice me to thru it out :wink: )
This solution doesn't work for me
Amazing.. I've tried banging my XDA off of my desk, sticking all sorts of crap in the headphone socket (at this point, I didn't really care if I broke it more lol)... nothing worked..
Then just now, I thought.. hm.. I'll just blow as hard as I can in the little hole... I did this for a good five minutes.. and it now works
:lol: :lol: :lol: :lol: :lol: :lol:
Hi,
I recently upgraded my ROM to version 2.06, radio 1.18 and used Sins Ext Rom version 3.5. Since the upgrade, when I use by Jabra 250 BT handsfree, people are complaining that i sound faraway or on the other side of the room when i talk. I can hear others fine. I never had this issue with my 1.60 rom that came installed with the phone.
I actually have 2 of the Jabra 250 and tried bonding with both devices to rule out a hardware error with the hands free itself and the problem occurs with both units.
I did have Pocket Bluetooth tools installed at one point and removed the program from my device and that is the only thing i can think of that might have screwed with the Radio or the BT.
Anybody out there have any ideas,
Thanks,
Danny
Hi Danny,
I did the upgrade this week end.
I have the same problem.
Regards
JoseF
Hi,
New upgrade to Rom 2.20
The bt Jabra works ok.
Heya Universed,
I had the same problem when I bought my BT250, I realised that why I sounded so far away was because the headset's mic was disabled and my voice was being picked up by the XDA mic.
There are a few forum topics regarding loss of mic depending on ROM version.
I am using ROM 2.06, radio 1.18 and sins EXT rom 3.5, but I am using pocket blue tooth tools and only bonding the 250 as a headset (there are work-arounds for handsfree but the 250 doesn't seem to like them ie the mic gets disabled).
I haven't yet been able to have a handsfree solution for my 250 though hopefully a proper (not converted) ROM 2.20 may solve this.
Craig.
Well,
I ended up reflashing my ROM and building everything over from scratch and the problem has gone away. So there must be some sort of configuration issue between the 2.06 ROM and other 3rd party software that I had installed.
This time around i have yet to install Pocket Blue Tooth Tools and have yet to reisntall Voice Command 1.5. So don't really know the underlying cause but have rectified the problem just for today.
I like the idea of upgrading to 2.20 Rom but i am understand there is no English version out for my Asia copy O2? Lemme know ifI I am incorrect on that count?
Thanks,
Danny
Ok...
I haven't found anyone else that would admit to trying these headphones with my phone (Dopod 838 Pro).
The headphones themselves are pretty cool. They fit pretty well, don't look toooo dorky, and the buttons click nicely etc. I haven't had them go flat on me yet. They could have come with a protective case though, and you have to take the microphone off to charge them, and I'm always afraid I will lose it.
When I first got them, they sounded crap. AM radio crap. I updated them to the latest firmware from the BlueAnt website (what a drama).
Tested, and they worked ok with the dongle - not exactly hifi sound, but the quality was ok to listen to.
Next I called BlueAnt HQ here in Australia, and after getting put through to a tech support guy he told me "They should work fine, I tried them with an iMate JasJam - no problems. Do a reset and try re-pairing them" (Duh).
Then I called the Dopod support line in Australia. During business hours. It goes through to an answering machine that doesn't even have an introduction message. Left a message. No reply.
Just as I was about to return them, I found the A2DP software tweak/patch on the wiki. First let me just say:
AAARRRGHHHH! What they hell are Microsoft thinking? Why have a registry setting \HKLM\StereoMusic\MakeMyMusicSoundLikeCrap=1 setting in the first place, and THEN why ship all phones with that enabled as the default? How many people have returned perfectly functioning Bluetooth headsets because of that? STUPID. I reckon Microsoft/HTC owe BlueAnt (and others) a truck load of money.
Secondly, that helps. Music is now stereo. I've been using them every day for a few weeks now. The bad news:
1) The quality is still very poor. There is a metallic hissing/sizzling/sibilance sound, especially noticeable on female vocals, which sounds (to me) exactly like a poor bitrate encoding error. The quality is much worse than when I pair it to the dongle it came with. I suspect it is the phone (or the MS BT stack) at fault not the headset. I would really like to be able to fix this.
2) With Wifi enabled, the music cuts out every few seconds. Unlistenable.
3) With Wifi disabled, I get the occasional glitch. I can live with that (if I must)
4) Using the headset profile during a phonecall, the sound I hear isn't too bad (a little muffled) but people tell me I sound really distant and hard to hear.
5) The AVRCP support is dodgy. Most of the time it works. Often when I first hit Play, it plays for a few seconds and then stops. I have to hit Play/Pause again and it starts. Track seek and volume up/down seem to work well. Answering a phone seemed hit and miss at first, but seems to mostly be working now. Not sure if this is the phone or the headset.
The iMate JasJam listed in the compatitabilty section of the BlueAnt website, but the Dopod 838 Pro is not. I emailed BlueAnt with my findings, and suggested they add the A2DP hack to their FAQ for other users. Hasn't appeared yet.
So, my questions:
1) Has anyone tried these headphones on a Hermes device? Does your experience mirror mine? Or is one of my devices faulty? Is the voice quality on the headset profile ok?
2) Is there a Widcomm (?) stack that works on the Hermes that may fix the problem, or...is it likely to be any better with WM6?
3) Does anyone have an A2DP headset of any brand working on a Hermes with "Crystal clear CD quality sound" like it says on the box the headphones came in. If so, what brand? If it is possible to get a good sound out of the MS BT stack, it might be worth pushing BlueAnt to release a new firmware to fix the issues.
4) Would a Bluetooth 2.0 headset give a better result? (Is it a bandwidth issue?)
Any replies would be helpful.
Thanks guys,
Zilch.
Yep I have an X5 unit connected to my Imate Jasjam and have not updated the firmware.
Yes it did skip when I first tried it but after a bit of experimenting, discovered turning off WiFi fixed it.
Yes it was mono till I did the reg hack to make it stereo.
No I don't get any hiss and think the quality is great (I know this is subjective but I tested female vocals as you suggested and they were great -Croncrete Blond, Eurythmics, Dyvinals, and even Chris Issac)
You may want to go here http://blogs.msdn.com/windowsmobile/default.aspx to realise the complications/dificulties the Ms WM guys are up against. I am sure they had a good reason to set the default to mono (maybe some devices didn't work at all with it set to stereo)
I would have to suggest there are other issues with your setup that are compromising the playback quality. I honsetly am impressed.
I don't use it as a phone headset as I use the X3 model to connect to two phones (I like Blue Ant stuff), so I can't comment on the mic quality.
When you consider that most people are having a nightmare with their stereo headsets (read the Widicom thread, if you have a lifetime to spare), then I am totally impressed with Blue Ant.
Sorry to have to disagree with you.
esseff said:
Yep I have an X5 unit connected to my Imate Jasjam and have not updated the firmware.
Click to expand...
Click to collapse
Thanks for the reply!
Yes it did skip when I first tried it but after a bit of experimenting, discovered turning off WiFi fixed it.
Yes it was mono till I did the reg hack to make it stereo.
No I don't get any hiss and think the quality is great (I know this is subjective but I tested female vocals as you suggested and they were great -Croncrete Blond, Eurythmics, Dyvinals, and even Chris Issac)
Click to expand...
Click to collapse
Hmm...ok. Are you saying that the quality from your JasJam is the same as if you used the supplied Bluetooth Dongle that comes with the X5? (That's my goal currently)
If so, maybe there is some sort of configuration difference between the JasJam and the Dopod. (The JasJam is on the compatibility list, and the support guy did say he had used it ok)
I'm not just being an anal hifi buff here. The sound quality is obviously poor, and quite noticeable. You probably don't have it, but if you listen to the track 'Lithum' by 'Evanescense' it makes you cringe when the vocals come in (the piano sounds relatively normal. It's noticable in all tracks, but specifically in tracks like that.
Did you use this utility to tweak the A2DP sound settings? Or edit the registry manually (if so, can you tell me what settings you used?)
You may want to go here http://blogs.msdn.com/windowsmobile/default.aspx to realise the complications/dificulties the Ms WM guys are up against. I am sure they had a good reason to set the default to mono (maybe some devices didn't work at all with it set to stereo)
Click to expand...
Click to collapse
I don't really accept that as a valid reason. Sure they have problems. The least they could do is make a user tweakable UI to change that setting. It's not acceptable to have a protocol designed for stereo music set to mono and no way for a user to change it.
I would have to suggest there are other issues with your setup that are compromising the playback quality. I honsetly am impressed.
Click to expand...
Click to collapse
Ok, good to know. I haven't given up yet!
Sorry to have to disagree with you.
Click to expand...
Click to collapse
Not at all! Thanks again for the reply.
Edit: If you get a chance, can you do me a favour and check if yours is the H1 or the H4 model? (First two digits of the serial number, under the battery of the left headphone).
Zilch.
esseff said:
Yep I have an X5 unit connected to my Imate Jasjam and have not updated the firmware.
You may want to go here http://blogs.msdn.com/windowsmobile/default.aspx to realise the complications/dificulties the Ms WM guys are up against. I am sure they had a good reason to set the default to mono (maybe some devices didn't work at all with it set to stereo).
Click to expand...
Click to collapse
Ehh... they could pay up and get a proper BT-stack from Widcomm....
Zilch said:
Thanks for the reply!
Hmm...ok. Are you saying that the quality from your JasJam is the same as if you used the supplied Bluetooth Dongle that comes with the X5? (That's my goal currently)
If so, maybe there is some sort of configuration difference between the JasJam and the Dopod. (The JasJam is on the compatibility list, and the support guy did say he had used it ok)
I'm not just being an anal hifi buff here. The sound quality is obviously poor, and quite noticeable. You probably don't have it, but if you listen to the track 'Lithum' by 'Evanescense' it makes you cringe when the vocals come in (the piano sounds relatively normal. It's noticable in all tracks, but specifically in tracks like that.
Did you use this utility to tweak the A2DP sound settings? Or edit the registry manually (if so, can you tell me what settings you used?)
I don't really accept that as a valid reason. Sure they have problems. The least they could do is make a user tweakable UI to change that setting. It's not acceptable to have a protocol designed for stereo music set to mono and no way for a user to change it.
Ok, good to know. I haven't given up yet!
Not at all! Thanks again for the reply.
Edit: If you get a chance, can you do me a favour and check if yours is the H1 or the H4 model? (First two digits of the serial number, under the battery of the left headphone).
Zilch.
Click to expand...
Click to collapse
I haven't used the dongle for a long time but when I did it was thru my HiFi playing CDs not MP3 so there may have been a difference in quality but never bothered to compare as I never had a problem with the playback quality from my Imate.
I did a manual reg fix using the wiki recommendations of 48 and 0.
I have model H1.
You may be right that the Imate is configured a little differently but I also run it very clean.
I have so few problems compared to what I read that I feel embarressed that I'm so lucky. As an IT consultant I just luv it as my work phone - I use VPN, Terminal Services, WiFi, Push Email, internet access, etc... and it's a phone! Constantly impressed.
Rant>
Can't believe the way people on this forum butcher their devices and end up with something that is full of broken things... oh but I'm sooooo cool because I have WMXL .20.1 with radio rom 6.47.803 - don't care that nothing works anymore. Juss wanna be soooo cool.
esseff said:
I did a manual reg fix using the wiki recommendations of 48 and 0.
Click to expand...
Click to collapse
Did you set a bitrate?
I have model H1.
Click to expand...
Click to collapse
I wonder if this is the difference. Mine is an H4 version.
You may be right that the Imate is configured a little differently but I also run it very clean.
Click to expand...
Click to collapse
Just for the record, I got the headphones a few days after I got the phone. The only thing I had done was put my SIM card in, copy a few MP3s and change the default theme (since the Dopod one is grey).
There were no mods/hacks/cooked ROMS/tweaks etc. Just the ROM it came with which is also the latest version on the Dopod website. My phone is supplied to me by work, so I need it to be as reliable as possible - I can't afford to mess around with it. (Which is one of the reasons I resent having to edit the registry to get some stereo headphones to play in stereo)
Note: Today I have a few apps installed. An RSS reader, train timetable, TomTom etc. Only hack is the registry change for A2DP, and a util which sets the soft input to Block Recognition mode on startup. None of these seem to have affected the quality of the A2DP stream in any way though.
Unless I can try my headphones with someone's JasJam, or another Dopod I'm not sure I'm going to be able to narrow down the issue. I think it has to be a difference in the X4 hardware/firmware or an issue with the Dopod ROM (compared to the JasJam one)
I have so few problems compared to what I read that I feel embarressed that I'm so lucky. As an IT consultant I just luv it as my work phone - I use VPN, Terminal Services, WiFi, Push Email, internet access, etc... and it's a phone! Constantly impressed.
Click to expand...
Click to collapse
I have it as a work phone too - and work in IT. I haven't had any issues with it except Windows Media Player losing the tracks on the storage card, and the device locking up from time to time (this is always when I am not using it - it is turned off and does not turn back on). Overall it's a great phone!
Rant>
Can't believe the way people on this forum butcher their devices and end up with something that is full of broken things... oh but I'm sooooo cool because I have WMXL .20.1 with radio rom 6.47.803 - don't care that nothing works anymore. Juss wanna be soooo cool.
Click to expand...
Click to collapse
Dude. You are hanging around the xda-developers forum. Each to their own. Tweaking is fun for these guys. It's like mechanics cars. You and I are in a different position as our phones are a work tools and have to be reliable. I'm more than happy to benefit from people experiences hacking theirs though
Zilch.
esseff said:
I don't use it as a phone headset as I use the X3 model to connect to two phones (I like Blue Ant stuff), so I can't comment on the mic quality.
Click to expand...
Click to collapse
I was actually considering getting an X3 as well (they look cool), but I will wait until I have worked out the issues with my X5.
Just thinking about this. How does it work? You are bopping along to your perfect A2DP sound, and you somehow hear the phone ringing, so you take off the stereo headphones, get your X3 out of your pocket, insert it in your ear, and answer the phone!?
Zilch.
Zilch said:
I was actually considering getting an X3 as well (they look cool), but I will wait until I have worked out the issues with my X5.
Just thinking about this. How does it work? You are bopping along to your perfect A2DP sound, and you somehow hear the phone ringing, so you take off the stereo headphones, get your X3 out of your pocket, insert it in your ear, and answer the phone!?
Zilch.
Click to expand...
Click to collapse
Don't use X5 at work, but when I'm relaxing at the beach or around the pool. Use X3 connected to my Imate and my private phone at work. AT the time it was the only headset that would connect to more than one device and works great.
>
Dude. You are hanging around the xda-developers forum. Each to their own. Tweaking is fun for these guys. It's like mechanics cars. You and I are in a different position as our phones are a work tools and have to be reliable. I'm more than happy to benefit from people experiences hacking theirs though
Zilch.
>
... but i shake my head in disbelief when I read some of the things ppl do.
Kupur was applauding an admitted newbie who, after 1 hr of owning his device decided it wasn't right and flashed it with some cooked rom, upgraded the radio, and SIM/CID unlocked it!!
How can this guy have any point of referance? How can he know he has made an improvement if he never bothered to use it properly in it's std state? And he will no doubt curse and abuse Ms and HTC for producing crap hardware and software.
As you say each to their own but it's hard for me to understand some ppls mentality.
esseff said:
>
... but i shake my head in disbelief when I read some of the things ppl do.
Kupur was applauding an admitted newbie who, after 1 hr of owning his device decided it wasn't right and flashed it with some cooked rom, upgraded the radio, and SIM/CID unlocked it!!
Click to expand...
Click to collapse
If I was tempted to do that, right after getting it is probably when I would do it. Reloading all your stuff sucks. Plus if he needed it SIM unlocked to use it that could be why.
Plus, what a better way to learn than bricking a $900 brand new phone?
Zilch.
Zilch said:
So, my questions:
1) Has anyone tried these headphones on a Hermes device? Does your experience mirror mine? Or is one of my devices faulty? Is the voice quality on the headset profile ok?
...
3) Does anyone have an A2DP headset of any brand working on a Hermes with "Crystal clear CD quality sound" like it says on the box the headphones came in. If so, what brand? If it is possible to get a good sound out of the MS BT stack, it might be worth pushing BlueAnt to release a new firmware to fix the issues.
Click to expand...
Click to collapse
To answer my own question in case anyone else is having this issue...it's all fixed with the official WM6 ROM. Works perfectly. (Except for the dropouts when WiFi is enabled)
yeah I have them and have had for quite some time now ... first used them with my Eten G00 then the G500+, then I changed phones to a nokia n73 and things didn't seem so good. anymore I lost the remote functions and even though I like the new phone I missed some things like nav and others so i went back tot he g00+. I have now updated to the HTC Tytn II I think sim to your hermes ....
I find nothing wrong the x5 controls a re great and quality is exceptable... I have no issues with Wifi.. I have the updated firmeware on my x5 and the stock firmware on my tytn II..
I also have a hs850 paired to the device the only thing I deslike on the hole issue is that everytime I use the x6 I have to fiddle around getting them to resume the pairing.
where as my hs-850 I just turn on blue tooth and turn on the headset... and off we go...
I have the x5 set as default headset and default stereo headset... the hs850 is just another device listed and pairs up soon as its turned on.
Can someone post me the headset firmware and how to use it?
SunnyRio said:
Can someone post me the headset firmware and how to use it?
Click to expand...
Click to collapse
I got it from blueant.com I think. (Was some time ago). It was updating the phone that fixed the issues though.
Zilch said:
I got it from blueant.com I think. (Was some time ago). It was updating the phone that fixed the issues though.
Click to expand...
Click to collapse
I can't seem to find it. can you upload it somewhere? Or give me a link?
hello forumer
im new here...
i need ur all suggestion
im using 818 pro for 1 year....
after warranty finish a few days
my propphet having a problem
when i make or received a call....
i can't hear anything, same with other person....
is it speaker and mic problem?
but i can play music, video and ringtones as good as new....
some person said i can try to flasing to wm6.1...
can anybody help me.....
tq.....
HARDWARE Problems.
charlies_uno said:
hello forumer
im new here...
i need ur all suggestion
im using 818 pro for 1 year....
after warranty finish a few days
my propphet having a problem
when i make or received a call....
i can't hear anything, same with other person....
is it speaker and mic problem?
but i can play music, video and ringtones as good as new....
some person said i can try to flasing to wm6.1...
can anybody help me.....
tq.....
Click to expand...
Click to collapse
1. if you can make recordings with you prophet, that means the mic. of it is working fine,
2. can hear music, that mean the speaker in fine.....
3. well, did you mute your phone?
4. or alternatively, you may try to flash other roms, but,
5. you can also try to hard reset you phone before starting any further.. ^_^
Good Luck~~
i am saeidba i have this problem
hello
i have this problem too
i sure this problem is not hardwarly.
when i use the handsfree bluetooth its work fine.
pleas help our.
thanks
i mail : [email protected]
saeidba said:
hello
i have this problem too
i sure this problem is not hardwarly.
when i use the handsfree bluetooth its work fine.
pleas help our.
thanks
i mail : [email protected]
Click to expand...
Click to collapse
is it really can solve our problem?
can handsfree bluetooth can help me?
i've try using original handsfree but still can't solve this matter...
i will try to use bluetooth handfree...
i hope i can use back my prophet.....after buying new phone...
hehhe
hardware problem...
ive had this several months back...
its due to using the headphone a lot of the time that causes the metal in the audio jack to damage or lose its "spring"ity..hehe...
theres way to fix it...try find some post in xda
d4rkfun3ral said:
hardware problem...
ive had this several months back...
its due to using the headphone a lot of the time that causes the metal in the audio jack to damage or lose its "spring"ity..hehe...
theres way to fix it...try find some post in xda
Click to expand...
Click to collapse
my problem not fram audio jak . i tryed that .
i cann't use headset and handsfree whit wire . i can only use hadsfree bluetooth . and when i chenge my device ROM the headset work but after 10 min or 15min or few more that not work . early after softrest that work but after few hours again headset not work . and when i use over and over for several time of headset that work and again after few minutes headset not work .
saeidba said:
my problem not fram audio jak . i tryed that .
i cann't use headset and handsfree whit wire . i can only use hadsfree bluetooth . and when i chenge my device ROM the headset work but after 10 min or 15min or few more that not work . early after softrest that work but after few hours again headset not work . and when i use over and over for several time of headset that work and again after few minutes headset not work .
Click to expand...
Click to collapse
1. You case did sound like the ear-piece of the prophet is getting aged. (hardware matters)
2. Aging of electrical components cause unstable performance of the hardware,
3. I am afraid you need to replace the ear-piece of your prophet to dig your way out.
( or re-flash you prophet will be an alternative, to see if really a chance for software problem)
if so, feel free to flash with the tool from my signature.Error free anyway~ ^^ )
Good Luck ~~
dioxda2 said:
1. You case did sound like the ear-piece of the prophet is getting aged. (hardware matters)
2. Aging of electrical components cause unstable performance of the hardware,
3. I am afraid you need to replace the ear-piece of your prophet to dig your way out.
( or re-flash you prophet will be an alternative, to see if really a chance for software problem)
if so, feel free to flash with the tool from my signature.Error free anyway~ ^^ )
Good Luck ~~
Click to expand...
Click to collapse
hello
now . what i shold to do ?
sory for English .
saeidba said:
hello
now . what i shold to do ?
sory for English .
Click to expand...
Click to collapse
1. flash other rom (you may click and follow the steps @ my signature ),
2. bring your phone to repair
Strange, my other prophet (Xda Neo) has this issue, I think it is HW. I tried flashing Radio Rom, but no luck, also I changed earpiece but no luck. I will try flashing WM6, bluetooth headset works fine, very strange.
hello all...
im back again...
thanks so much for ur all suggestion and opinion
last choice for me...
ehehhe
i have send it to 3 shops to repair....
1st shop said board problem....to replaced very costly better buy new 1
2nd shop --- can repair but no spare part
3rd shop --- ic problem..after replaced the ic my prophet back to normal again...
tqq
3rd shop --- ic problem..after replaced the ic my prophet back to normal again...
Click to expand...
Click to collapse
I think it is audio ic, TI TWL 3027
charlies_uno said:
hello forumer
im new here...
i need ur all suggestion
im using 818 pro for 1 year....
after warranty finish a few days
my propphet having a problem
when i make or received a call....
i can't hear anything, same with other person....
is it speaker and mic problem?
but i can play music, video and ringtones as good as new....
some person said i can try to flasing to wm6.1...
can anybody help me.....
tq.....
Click to expand...
Click to collapse
There are separate speakers for hands free and earphone on xda neo (htc prophet) as i know, i had a problem with hands-free (music) speaker but i could still hear when making calls.
I don't know if this is going to help you, or you already solved it.
hi there,
1) after upgrading ny hermes-200 the ear speaker 9nit the loud speaker from the rear) stopped working. Now I cannot make phone calls and put the phone near my ear.
Does anyone familiar with such a problem? Or is it just a hardware failure?
Is there some way to Diagnise or solve this issue?
My cuurent rom is: Schap`s 3.60a
2) I`ve read almost every word In the hrmes wiki and I couldnot finde any WM6.1 cooked Rom for the hermes-200. IS there one availeable?
Or i`ll have to cook one by myselfmad:don`t like being in the kitchen)
Regards
You looked but ddn't read then as THIS IS A HERMES FORUM.... EVERY ROM on it is compatible with a Hermes device.... In the WM06 section any ROM that says 6.1 is compatible with your HERMES...
However, there is no OFFICIAL wm6.1 ROM as HTC don't support the Hermes anymore.
As for the speaker, did you drop your phone as this could have jarred the connection and the speaker connection may no longer be in contact. The front speaker connection is a mongrel to get to as the phone has to be completely broken apart.
Here is the tutorial on what you need to look for - http://forum.xda-developers.com/showpost.php?p=2001027&postcount=5
You will need to open your Hermes.
Cheers...
Tnx
Appreciate your reply.
I`ll try to open and fix the speaker.
Can you direct me to a wm6.1 rom.
I could not find it.
I think that a new organization of this wonderfull project
can help a lot new users
TNX