I tried to upgrade ny Orange SPV M 600
IPL 2.10.0001
SPL 2.10.0001
with wm6_smart1_v1.3 using ROMUpdateUtility_Wizard_NoID.zip and now its not booting up it stuck up with the three color boot loader screen and i tried hard to hard reset but even after keep pressing the camera and communication button together and pressing the soft reset button with stylus for more than one minute it gave no response plz help its my friends phone and I am doomed if I cant make it up working.
If you disable the connect through USB option in ActiveSync, and then put the SPV in bootloader. Then flash it with a AKU2.2 ROM (Any will do including PV temp), then follow this: http://forum.xda-developers.com/showthread.php?t=310452.
How do i put SPV in boot loader????
AKU2.2 ROM where do i find this the link(rapidshare) which is given in thread u told is not working and plz tell me if I will have to download a new rom after that or this wm 6.0 by smart1 will work
Hold the Camera button, and insert the stylus into the larger of two holes on the edge of the SPV with the power connector.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hardreset_bootloader
ya i tried this by reading the thread u mentioned but it puts me back on the same three color screen however I have been able to hard reset and after I press send it said formating FAT something like this
You must enter the bootloader (three colour screen), Then set ActiveSync to not connect through USB (ActiveSync->Settings->connection Settings), Plug the phone into your computer through USB, Then run any of the RUU's from any Part One of here: http://forum.xda-developers.com/showthread.php?t=308755.
Using the AKU2.2 ROM Update Utility, you should get a basic WM5 ROM. You MUST flash an AKU2.2 ROM before you flash a WM6 (AKU3.5) ROM.
Right now i am downloading this original roam from this link
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/OrangeUK/
will this do????
Can I directly install AKU 2.20 after downloading or will I have to do anything more like putting some file in boot loader which u just said???
I dont want WM 6 anymore plz just advice in steps what I should do to get my phone up and running..............
Put the phone in bootloader, change the active sync settings, and then run the upgrade program!
Good Luck!
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
absharaslam said:
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
Click to expand...
Click to collapse
It will do no harm, and there is a high chance it will work.
The RUU is fairly self explanatory-Double click on it and do what it says. The battery charge level is not a problem, so long as there is some charge.
Thanks a lot dude it worked I am relieved now
Thanks again boss
Salute!!!!!!!!!!!!!!!!!!
Glad to hear it
If you now feel experienced enough to upgrade properly, read this thread very carefully http://forum.xda-developers.com/showthread.php?t=310452 (or at least the first post) and then this post: http://forum.xda-developers.com/showthread.php?t=308755
atleast for now i dont have courage.............
This phone belongs to my bro and currently he is out on vacation and when he will come back i thought it will be a surprise that his phone become so good anyways no risk anymore..........
may be next time on my phone only
Well atleast he shouldn't notice the change.
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
absharaslam said:
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
Click to expand...
Click to collapse
No problem. Glad to make a difference
Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
Right, This is the basic Hard-SPL package; if you already have applied Hard-SPL with the unlocker then DO NOT BOTHER TO USE THIS PACKAGE.
This program is now foolproof as the SPL is flashed directly from the bootloader rather than from the OS so there's no opportunity for anything to go wrong.
for this to work, your device MUST BE RUNNING WINDOWS MOBLE and MUST BE SYNCED WITH THE PC.
to recap: IF YOU ALREADY HAVE 1.20/1.25, DO NOT USE THIS.
Thank you! I won't be waitin', though...
Whatever Trevor.
laikos said:
Hi I'm trying to downgrade to Hard SPL 1.1olipro to try to restore Factory SPL (Hoping that it will fix my WLAN Dead issue) however I can't seems to downgrade from IPL 1.04 + SPL 2.10.0lipro
I've followed the instruction from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
and I keep getting [error 260] Anyone knows how to get around this?
Thanks
Click to expand...
Click to collapse
it WILL NOT fix your dead WLan.
secondly, don't start spamming other threads by crossposting. Idiot.
Olipro said:
it WILL NOT fix your dead WLan.
secondly, don't start spamming other threads by crossposting. Idiot.
Click to expand...
Click to collapse
With all due respect I don't mean to SPAM neither crossposting, anyway I've make mistake by putting the device in Bootloader mode when I'm trying to downgrade the SPL. Yea I figured out it will NOT FIX the Dead WLAN either. Sorry for the inconvience
How do I go backward on my SPL
I upgraded to SPL 2.10, but my touch screen keeps failing, I f I leave the battery out for 30 min to an hour the touch screen works for about 30 min then goes touchless. I need to go back is it possible.
DRACO00 said:
I upgraded to SPL 2.10, but my touch screen keeps failing, I f I leave the battery out for 30 min to an hour the touch screen works for about 30 min then goes touchless. I need to go back is it possible.
Click to expand...
Click to collapse
The SPL has nothing to do with it.
Also, this is the Athena forum, so piss off.
DRACO00 said:
I upgraded to SPL 2.10, but my touch screen keeps failing, I f I leave the battery out for 30 min to an hour the touch screen works for about 30 min then goes touchless. I need to go back is it possible.
Click to expand...
Click to collapse
Take out the plastic cover and THEN try ))) I kinda keep hearing that a lot and this "fix" fixed a lot of those...
AThena broken, any help ???
Problem_Description: Hello,
My Athena bought since last may si out of order because i ve tried to install english rom for WM6 instead of the french one !!!.
I realise that a big mistake but how can i make it starting again, it's blocking in the wm6 upgrade screen ???
I ve tried to make hard reset to restore default parameters but no resultat and the original rom is dammaged and however has erased.
MS activsyn can'nt connect to the device because of no wm system is reconized ....
I'm waiting for your help because I can't work without Athena !!!!
Nothing work (tried soft reset or hard reset) but only a 3 colors screeen and no more ...
I m reelly sad and i'm wainting for your help.
Olipro said:
OK... just to make this clear.
Go to the Athena forum and download the unlocker; do Step 1 to flash Hard-SPL.
after that you can close the program if you don't need to unlock.
if I come out with new releases of Hard-SPL, the package will be posted here.
Click to expand...
Click to collapse
Have you used Olipro's unlocker before?
All theree steps ?
Can you enter the Bootloader Mode?
hey olipro! nice work i have a htc advantage x7500 and i try to hard spl it but it's not working!!! at the Step 1 when the cab was copied to the device i've installed it but my device was working and it hadn't gone idle!!! what can i do now? could you help me?
oh GOD i think i brick my device!!! i install RUU_Athena_DOPODASIA_WWE_2.19.707.4_1.45.00.10_Ship without doing any of the steps and now it's like this can anyone hel me????
Unlocker for x7501?
Is this unlocker suitable for the x7501 WM6 unit as well? Also do you still need to flash the SPL on the x7501?
Lastly what is "SPL" and why can you brick your device if you don't carry out this upgrade?
simonsalo said:
Is this unlocker suitable for the x7501 WM6 unit as well? Also do you still need to flash the SPL on the x7501?
Lastly what is "SPL" and why can you brick your device if you don't carry out this upgrade?
Click to expand...
Click to collapse
try reading around to find out. or did you think I was bullshitting. I'm struggling very hard not to insult you for your laziness.
Advantage Problems
-----------------------DO NOT USE UNLOCKER ON UNLOCKED HTC 7501 ADVANTAGE ------------------
Oli,
I have (had) a brand new unlocked 7501 Advantage. I followed your unlocker advice above to do step 1 very carefully and now have a bricked device after I saw the same error trying to backup my SPL file like others. Can you place a big bold warning on your SPL Flash link so that other people may not see the same fate...from reading the comments on this thread we are lead to believe that you suggest that we should flash to your SPL before trying a cooked ROM on the 7501 Advantage...
TIA
-Lol! Some big Advantage, now Im out 900 bucks !
photon2 said:
Oli,
I have (had) a brand new unlocked 7501 Advantage. I followed your unlocker advice above to do step 1 very carefully and now have a bricked device after I saw the same error trying to backup my SPL file like others. Can you place a big bold warning on your SPL Flash link so that other people may not see the same fate...from reading the comments on this thread we are lead to believe that you suggest that we should flash to your SPL before trying a cooked ROM on the 7501 Advantage...
TIA
-Lol! Some big Advantage, now Im out 900 bucks !
Click to expand...
Click to collapse
If you can get to bootloader, there might be hope yet. Follow this solution , if you can
http://forum.xda-developers.com/showthread.php?t=326953
Still no luck- been trying all day but nothing - not able to see anything except red LED lit up around the joystick when I am on AC and the battery is removed.
I am going to try warranty repair but probably am out of luck
photon2 said:
Still no luck- been trying all day but nothing - not able to see anything except red LED lit up around the joystick when I am on AC and the battery is removed.
I am going to try warranty repair but probably am out of luck
Click to expand...
Click to collapse
Are you able to get into bootloader? If I read correctly the answer should be no but I wanted to confirm either way. If no, how have you tried to get into bootloader? Key sequence in other words? Have you removed the SD card also?
You are correct, I cannot seem to get into the bootloader or even get the device to come alive at all. I tried camera + reset, volume down + reset, volume down + camera + reset, I looked all over the forum and found a few others but still no luck. All I see is the red LED around the Joystick either become solid lit (without battery in and on AC) or blink lit (with battery in and on AC). The light stays solid lit with battery out and all key combinations tried and does the quick blink lit with battery in and all key combinations as long as reset is pushed. Basically, it would seem that the reset key is working by resetting the circuit to the battery but the device just wont boot up.
I will be sending this unit back anyway due to a manufacturing defect of the SD card slot. When this particular unit was built, I guess no one actually checked to see if the a (mini not micro) SD card fits in, cause IT DON'T!! The slot was missed by about 2mm being to narrow in width...GEESH!!
I am not too happy with hardware of the 7501 right now and probably will look at getting the 7500 or Dopod version for "cooked ROM" pleasure but my advice to others reading this would be to not run out and get the 7501 at the lower price given the problems I am seeing. However, on a positive note, the few hours I did get the 7501 running, it was a blast and I still give the overall performance a 4.5 out of 5 star rating being the most complete and fastest PDA Phone I have had the pleasure to work with.
photon2 said:
You are correct, I cannot seem to get into the bootloader or even get the device to come alive at all. I tried camera + reset, volume down + reset, volume down + camera + reset, I looked all over the forum and found a few others but still no luck. All I see is the red LED around the Joystick either become solid lit (without battery in and on AC) or blink lit (with battery in and on AC). The light stays solid lit with battery out and all key combinations tried and does the quick blink lit with battery in and all key combinations as long as reset is pushed. Basically, it would seem that the reset key is working by resetting the circuit to the battery but the device just wont boot up.
I will be sending this unit back anyway due to a manufacturing defect of the SD card slot. When this particular unit was built, I guess no one actually checked to see if the a (mini not micro) SD card fits in, cause IT DON'T!! The slot was missed by about 2mm being to narrow in width...GEESH!!
I am not too happy with hardware of the 7501 right now and probably will look at getting the 7500 or Dopod version for "cooked ROM" pleasure but my advice to others reading this would be to not run out and get the 7501 at the lower price given the problems I am seeing. However, on a positive note, the few hours I did get the 7501 running, it was a blast and I still give the overall performance a 4.5 out of 5 star rating being the most complete and fastest PDA Phone I have had the pleasure to work with.
Click to expand...
Click to collapse
Man that sucks. Seems like you've tried the correct combination of keys to get into bootloader...just make sure you were pressing that camera button firmly because it's known not to take unless you do this.
What operating system is on your computer BTW? Windows XP/Vista?
I'm not sure I understood the problem with the SD Card. Do you mean to say that when you tried to put in a mini-SD card (not Micro), it wouldn't fit into the slot?
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dia_dxo and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
..
..
..
Please check you battery..
..
..
..
what do u mean by checking my battery it's fully charged 98%
crazy_luv said:
what do u mean by checking my battery it's fully charged 98%
Click to expand...
Click to collapse
1. How long have you been using your battery?
2. 100% charged is not equal to a healthy battery,
3. normally, the longer year the battery you use, the weaker the battery performs.
4. just .... if you have the other new battery, test the result, or
5. you can also check if the your problem will be the same if AC charger is plugged.
just wanna assist.
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
crazy_luv said:
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
Click to expand...
Click to collapse
1. you may connect the usb power to make a softreset, and to see you problem exists or not,
if no more problem, that means the battary MAY BE not healthy enough to bear the
high(for micro electronics) electric consumtion for prophet rebooting.
Good Luck. Just one of the ways to find your answer logically.
By the way, for monitoring your battery, you may use the battery status.
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
rondol1 said:
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
Click to expand...
Click to collapse
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
dioxda2 said:
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
Click to expand...
Click to collapse
Together we will manage... But you are talking about battery condition as a solution for his "stuck in bootloader" problem? I am under the impression that you misunderstood his question. But then again, it could also be me who misunderstood!
I think the 'battery' may be something to do with the power provided by the USB port.
Try entering bootloader with the AC supply in.
RE:1. am not able to send DTMF during the phone call
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
About this "1. am not able to send DTMF during the phone call "
try to find in registry this key (EnableDTMF) and change it to 0
i know is very strange, but it works...
I'm stuck on the screen that says SPL-1.20.01 Olipro did I brick it ? please help!
No, it is not bricked. You should just have to flash the Titan Unlocker, refer to this thread->http://forum.xda-developers.com/showthread.php?t=423177
That should get you going. After that you will need to flash a rom with radio.3.4+ (perferably 3.42.50), or flash the radio, then flash the rom.
If that doesn't resolve your issue just search for Titan Relocker
Thank you !! greatly appreciate it trying it now
theintrospect said:
No, it is not bricked. You should just have to flash the Titan Unlocker, refer to this thread->http://forum.xda-developers.com/showthread.php?t=423177
That should get you going. After that you will need to flash a rom with radio.3.4+ (perferably 3.42.50), or flash the radio, then flash the rom.
If that doesn't resolve your issue just search for Titan Relocker
Click to expand...
Click to collapse
Dude I dont want to be mean to you but I have noticed the past couple days you jumping right in.. With knowledge or not.. What are you trying to do? Your answer is wrong as the User states that he is stuck in bootloader, to flash a bootloader needs to be done from a functioning OS.. Also by the looks of his bootloader it was never unlocked so how could he use the re-locker?
There are far more steps then just flashing an unlocked bootloader from where he is at in stuck bootloader. He may need to run ExitBootloader before trying anything depending on if he can reset the phone and it doesnt go right to bootloader (that would mean stuck bootloader)
Hint * Exitbootloader fix (if stuck in bootloader meaning even a reset will not get out of it), then Branded Carriers Stock ROM (User should know if it was GPS or not), then Olipro 2.40 Unlocked bootloader, then Custom ROM and GPS Radio.
Thank you Ryan ! I'll search for exit bootloader now ...
suhas2000 said:
Thank you Ryan ! I'll search for exit bootloader now ...
Click to expand...
Click to collapse
Here I cringe and wince to have to post this link at ppc dorks but its the first thing I found with easy instructions. Read the part about the titan, disable usb connections by right clicking active sync icon in taskbar and then plug the phone in after putting into bootloader (i know its stuck, just do it anyways, power + camera + reset button for couple seconds) Then run the Exitbootloader.
http://forum.ppcgeeks.com/showthread.php?t=9229
Then from there follow my previous instructions, you need to put the Stock ROM back on the phone whatever carrier its branded to. Then while in the Stock ROM's OS re-enable active sync connections and plug the phone in and make sure its synced and working properly. Then flash the Olipro 2.40 bootloader. Then while the phone is still in the olipro 2.40 bootloader flash the Custom ROM you want to use and then the GPS Radio. Perform a hard reset and pull the battery for a couple minutes. Then you should be set to jet.
Ok I think I rushed into it without waiting for your advice & now I'm out of the first screen but stuck in htc mobility/ no radio screen.. wtf ? am I that dumb ?
It keeps saying that my device is not connected to the PC... I made sure about the USB option in active sync & stuff... pls help
suhas2000 said:
Ok I think I rushed into it without waiting for your advice & now I'm out of the first screen but stuck in htc mobility/ no radio screen.. wtf ? am I that dumb ?
Click to expand...
Click to collapse
Make sure you are using Active Sync 4.5 and not using a Hub. Make sure to plug the USB cable into a main port on the PC. While the phone is unplugged. Manually put the phone in bootloader (power + camera + reset "little hole near memory card slot" buttons for couple seconds and release), make sure the active sync usb connections are disable from active sync connection settings on your PC's taskbar. Then plug in the phone (while in bootloader in to computer) and flash your Stock Branded Carriers ROM by running the Rom Update Utility EXE, RUU or exe however it comes. Once that is done you can unplug the Phone and let it boot up customize and all. Then re-enable the active sync usb connections in connection settings (PC Taskbar Active sync icon) and plug the phone in. Should sync up. Icon will turn green. Now flash the Olipro 2.40 bootloader and let it do its thing make sure to pay attention. When it is done it will still be in bootloader, then you can go ahead and flash your Custom GPS Titan ROM and GPS Titan RADIO followed by a hard reset and battery pull for a couple minutes.
You're a great teacher.. awesome step by step instructions... after all this, I think I'm gonna stick with the stock ROM ... so much for the flashing & all that !
I'll keep you informed about the progress .. thanks a million !!
It did it again ! at 11 % it stops & goes back to that original SPL 1.20.Olipro screen what am I dong wrong ? I feel such an idiot !
suhas2000 said:
You're a great teacher.. awesome step by step instructions... after all this, I think I'm gonna stick with the stock ROM ... so much for the flashing & all that !
I'll keep you informed about the progress .. thanks a million !!
Click to expand...
Click to collapse
No problem, well if you stay with the stock ROM stop before the Olipro 2.40 bootloader. That is for GPS ROM's only.
So if you are a little nervous and wish to remain stock follow my instructions up until the Olipro 2.40 part.
If you wish to continue and go the Custom ROM route thats up to you. Just remember if switching Carriers you need to Load PRL, Do PST and QPST settings. Plus the Custom ROM may need a Carrier CAB installed and registry edits for MMS. With my Custom ROMs you do not need Carrier cab or registry edits (but you still need to do PST/QPST and PRL) . I have 5 carriers to choose from right now for example.
suhas2000 said:
It did it again ! at 11 % it stops & goes back to that original SPL 1.20.Olipro screen what am I dong wrong ? I feel such an idiot !
Click to expand...
Click to collapse
If you are using Windows XP, Try installing these drivers to your Computer, restart your Computer, make sure you are plugged in to only a main port on the pc, unplug every other usb device just to make sure. and go over the steps again. You may need to pull the battery and let it sit for awhile, then put the battery in (do not power up) and charge for a little bit. Then try again.
Thanks for your patience ..greatly appreciated !
suhas2000 said:
Thanks for your patience ..greatly appreciated !
Click to expand...
Click to collapse
No problem, I am pretty sure the Stock ROM you need to flash has to be NON GPS as per the bootloader that is on there now. Just making sure you know that.
Ok all I want is to get the GD my sprint stock 3.56 ROM back on.. but it only goes till 11 % & stops ..what the hell am I doing wrong ? Ryan you don't understand how much I admire your patience with dummies like me !
suhas2000 said:
Ok all I want is to get the GD my sprint stock 3.56 ROM back on.. but it only goes till 11 % & stops ..what the hell am I doing wrong ? Ryan you don't understand how much I admire your patience with dummies like me !
Click to expand...
Click to collapse
Try an earlier NON gps stock sprint ROM.
I'm so sick of looking at that SPL 1.20 screen... lol can we start from scratch again pls ? I know it is annoying
I tried to flash to sprint stock 3.35 which is the older 6.0 rom.. still it too stopped after 11% ... what's the matter ? Ryan pls help !
suhas2000 said:
I tried to flash to sprint stock 3.35 which is the older 6.0 rom.. still it too stopped after 11% ... what's the matter ? Ryan pls help !
Click to expand...
Click to collapse
3.35 is still GPS. You need the NON GPS Sprint ROM.
hello folks,
first off thanks to all the people who help make this forum better and better.
have used you're help a few times especially trying to flash a rom. but now there's a problem... I've installed artemis Rom a couple of times but I wanted the newest so I've downloaded it, flashed my hd2 with task29 like always. pressed vol. down button it restarted until white boot screen. ok, possible, so I reset it and press vol. down again. but still white boot screen. after trying it for 70(!) times. I used the forum. saw that maybe hooking it up to pc and starting custom rom .exe should work. but no. wont even start when hooked to a computer. so please help!
Info:
Cotulla hspl 1.42.00
Task29 by dooloop performed( got stuck after that)
Rom Artemis. 31.5 (current) 35.1 (wanted to install.
Thanks In Advance
Maajelvv
Two possibility's;
Tray to do a hard reset,
Ore tray to install Stock Rom!
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
I'm out off Idea; tray to send Sir Sternas a PM with your question, maybe he get some Ideas; ore tray to ask this question on the Artemis Thread, there are also helpful peoples out there!
Edit; I just add your question on the Artemis thread!
http://forum.xda-developers.com/showthread.php?p=8450678#post8450678
you haven't made hard reset. if you wont to do hard reset you have to press both volume buttons and then pres power buton ( or press red button near batery ).
also try to make a goldimage ( search the forum ).
regards
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
As Luka1111 said, you haven't done a hard reset. Check this out:
http://www.smartphonegurus.com/forums/topic/8829-hd2-how-to-soft-reset-hard-reset-and-place-in-bootloader-mode/
Dmm;
That I didn't see/read it correctly the way he did a hard reset??
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
What´s the size of your SD-Card? Flashing from SD works only with max. 8 GB - Card, 16 GB or more won´t work! (Own experience!)
Can you connect your device to ActiveSync? Or otherwise stated: What happens when you connect your device to your PC? Does ActiveSync or Windows Mobile Device Center even startup?
BTW, what happens when you start your device now? Does it hang or just load your old Artemis version??
regards, Kuzibri
uli71 said:
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Click to expand...
Click to collapse
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hey guys,
maybe you haven't read my whole posting: Have you tried to get access to tricolor bootloader without pluged in SIM and SD?
If you had trouble with your answer button before flashing, is it possible your volume button is also without function? Therefore it seems to be a hardware problem.
Sorry, if this is not the answer you would like to read, but the advise to test without pluged in SIM and SD is my last. Entering bootloader is a basic system feature, as far as I know.
Best regards,
Uli
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hi,
I have send you a PM. Please read this ASAP!!
regards, Kuzibri
Hey Uli,
I've tried both. with and without sim or SD cards. still no functioning....
I've thought about the fact that it might be broken but it worked right before flashing....
thanks for your efforts though..
Maajelvv
As I already mentioned, this poor guy has a major problem with his device, which seems to be hardware related (either volume down button does not work or the on/off key). After having extensive contact with him by phone, the only solution seems to be to bring it back to the store to let it repair. Unfortunately, he will have a great chance to loose his warranty, because HTC probably will be able to found that there is another ROM installed. Whish Maarten good luck with his problem!! Also very sorry I could not help you to solve your problem. I'm personally very disappointed by that!
regards, Kuzibri