I'm stuck on the screen that says SPL-1.20.01 Olipro did I brick it ? please help!
No, it is not bricked. You should just have to flash the Titan Unlocker, refer to this thread->http://forum.xda-developers.com/showthread.php?t=423177
That should get you going. After that you will need to flash a rom with radio.3.4+ (perferably 3.42.50), or flash the radio, then flash the rom.
If that doesn't resolve your issue just search for Titan Relocker
Thank you !! greatly appreciate it trying it now
theintrospect said:
No, it is not bricked. You should just have to flash the Titan Unlocker, refer to this thread->http://forum.xda-developers.com/showthread.php?t=423177
That should get you going. After that you will need to flash a rom with radio.3.4+ (perferably 3.42.50), or flash the radio, then flash the rom.
If that doesn't resolve your issue just search for Titan Relocker
Click to expand...
Click to collapse
Dude I dont want to be mean to you but I have noticed the past couple days you jumping right in.. With knowledge or not.. What are you trying to do? Your answer is wrong as the User states that he is stuck in bootloader, to flash a bootloader needs to be done from a functioning OS.. Also by the looks of his bootloader it was never unlocked so how could he use the re-locker?
There are far more steps then just flashing an unlocked bootloader from where he is at in stuck bootloader. He may need to run ExitBootloader before trying anything depending on if he can reset the phone and it doesnt go right to bootloader (that would mean stuck bootloader)
Hint * Exitbootloader fix (if stuck in bootloader meaning even a reset will not get out of it), then Branded Carriers Stock ROM (User should know if it was GPS or not), then Olipro 2.40 Unlocked bootloader, then Custom ROM and GPS Radio.
Thank you Ryan ! I'll search for exit bootloader now ...
suhas2000 said:
Thank you Ryan ! I'll search for exit bootloader now ...
Click to expand...
Click to collapse
Here I cringe and wince to have to post this link at ppc dorks but its the first thing I found with easy instructions. Read the part about the titan, disable usb connections by right clicking active sync icon in taskbar and then plug the phone in after putting into bootloader (i know its stuck, just do it anyways, power + camera + reset button for couple seconds) Then run the Exitbootloader.
http://forum.ppcgeeks.com/showthread.php?t=9229
Then from there follow my previous instructions, you need to put the Stock ROM back on the phone whatever carrier its branded to. Then while in the Stock ROM's OS re-enable active sync connections and plug the phone in and make sure its synced and working properly. Then flash the Olipro 2.40 bootloader. Then while the phone is still in the olipro 2.40 bootloader flash the Custom ROM you want to use and then the GPS Radio. Perform a hard reset and pull the battery for a couple minutes. Then you should be set to jet.
Ok I think I rushed into it without waiting for your advice & now I'm out of the first screen but stuck in htc mobility/ no radio screen.. wtf ? am I that dumb ?
It keeps saying that my device is not connected to the PC... I made sure about the USB option in active sync & stuff... pls help
suhas2000 said:
Ok I think I rushed into it without waiting for your advice & now I'm out of the first screen but stuck in htc mobility/ no radio screen.. wtf ? am I that dumb ?
Click to expand...
Click to collapse
Make sure you are using Active Sync 4.5 and not using a Hub. Make sure to plug the USB cable into a main port on the PC. While the phone is unplugged. Manually put the phone in bootloader (power + camera + reset "little hole near memory card slot" buttons for couple seconds and release), make sure the active sync usb connections are disable from active sync connection settings on your PC's taskbar. Then plug in the phone (while in bootloader in to computer) and flash your Stock Branded Carriers ROM by running the Rom Update Utility EXE, RUU or exe however it comes. Once that is done you can unplug the Phone and let it boot up customize and all. Then re-enable the active sync usb connections in connection settings (PC Taskbar Active sync icon) and plug the phone in. Should sync up. Icon will turn green. Now flash the Olipro 2.40 bootloader and let it do its thing make sure to pay attention. When it is done it will still be in bootloader, then you can go ahead and flash your Custom GPS Titan ROM and GPS Titan RADIO followed by a hard reset and battery pull for a couple minutes.
You're a great teacher.. awesome step by step instructions... after all this, I think I'm gonna stick with the stock ROM ... so much for the flashing & all that !
I'll keep you informed about the progress .. thanks a million !!
It did it again ! at 11 % it stops & goes back to that original SPL 1.20.Olipro screen what am I dong wrong ? I feel such an idiot !
suhas2000 said:
You're a great teacher.. awesome step by step instructions... after all this, I think I'm gonna stick with the stock ROM ... so much for the flashing & all that !
I'll keep you informed about the progress .. thanks a million !!
Click to expand...
Click to collapse
No problem, well if you stay with the stock ROM stop before the Olipro 2.40 bootloader. That is for GPS ROM's only.
So if you are a little nervous and wish to remain stock follow my instructions up until the Olipro 2.40 part.
If you wish to continue and go the Custom ROM route thats up to you. Just remember if switching Carriers you need to Load PRL, Do PST and QPST settings. Plus the Custom ROM may need a Carrier CAB installed and registry edits for MMS. With my Custom ROMs you do not need Carrier cab or registry edits (but you still need to do PST/QPST and PRL) . I have 5 carriers to choose from right now for example.
suhas2000 said:
It did it again ! at 11 % it stops & goes back to that original SPL 1.20.Olipro screen what am I dong wrong ? I feel such an idiot !
Click to expand...
Click to collapse
If you are using Windows XP, Try installing these drivers to your Computer, restart your Computer, make sure you are plugged in to only a main port on the pc, unplug every other usb device just to make sure. and go over the steps again. You may need to pull the battery and let it sit for awhile, then put the battery in (do not power up) and charge for a little bit. Then try again.
Thanks for your patience ..greatly appreciated !
suhas2000 said:
Thanks for your patience ..greatly appreciated !
Click to expand...
Click to collapse
No problem, I am pretty sure the Stock ROM you need to flash has to be NON GPS as per the bootloader that is on there now. Just making sure you know that.
Ok all I want is to get the GD my sprint stock 3.56 ROM back on.. but it only goes till 11 % & stops ..what the hell am I doing wrong ? Ryan you don't understand how much I admire your patience with dummies like me !
suhas2000 said:
Ok all I want is to get the GD my sprint stock 3.56 ROM back on.. but it only goes till 11 % & stops ..what the hell am I doing wrong ? Ryan you don't understand how much I admire your patience with dummies like me !
Click to expand...
Click to collapse
Try an earlier NON gps stock sprint ROM.
I'm so sick of looking at that SPL 1.20 screen... lol can we start from scratch again pls ? I know it is annoying
I tried to flash to sprint stock 3.35 which is the older 6.0 rom.. still it too stopped after 11% ... what's the matter ? Ryan pls help !
suhas2000 said:
I tried to flash to sprint stock 3.35 which is the older 6.0 rom.. still it too stopped after 11% ... what's the matter ? Ryan pls help !
Click to expand...
Click to collapse
3.35 is still GPS. You need the NON GPS Sprint ROM.
Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
I tried to upgrade ny Orange SPV M 600
IPL 2.10.0001
SPL 2.10.0001
with wm6_smart1_v1.3 using ROMUpdateUtility_Wizard_NoID.zip and now its not booting up it stuck up with the three color boot loader screen and i tried hard to hard reset but even after keep pressing the camera and communication button together and pressing the soft reset button with stylus for more than one minute it gave no response plz help its my friends phone and I am doomed if I cant make it up working.
If you disable the connect through USB option in ActiveSync, and then put the SPV in bootloader. Then flash it with a AKU2.2 ROM (Any will do including PV temp), then follow this: http://forum.xda-developers.com/showthread.php?t=310452.
How do i put SPV in boot loader????
AKU2.2 ROM where do i find this the link(rapidshare) which is given in thread u told is not working and plz tell me if I will have to download a new rom after that or this wm 6.0 by smart1 will work
Hold the Camera button, and insert the stylus into the larger of two holes on the edge of the SPV with the power connector.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hardreset_bootloader
ya i tried this by reading the thread u mentioned but it puts me back on the same three color screen however I have been able to hard reset and after I press send it said formating FAT something like this
You must enter the bootloader (three colour screen), Then set ActiveSync to not connect through USB (ActiveSync->Settings->connection Settings), Plug the phone into your computer through USB, Then run any of the RUU's from any Part One of here: http://forum.xda-developers.com/showthread.php?t=308755.
Using the AKU2.2 ROM Update Utility, you should get a basic WM5 ROM. You MUST flash an AKU2.2 ROM before you flash a WM6 (AKU3.5) ROM.
Right now i am downloading this original roam from this link
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/OrangeUK/
will this do????
Can I directly install AKU 2.20 after downloading or will I have to do anything more like putting some file in boot loader which u just said???
I dont want WM 6 anymore plz just advice in steps what I should do to get my phone up and running..............
Put the phone in bootloader, change the active sync settings, and then run the upgrade program!
Good Luck!
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
absharaslam said:
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
Click to expand...
Click to collapse
It will do no harm, and there is a high chance it will work.
The RUU is fairly self explanatory-Double click on it and do what it says. The battery charge level is not a problem, so long as there is some charge.
Thanks a lot dude it worked I am relieved now
Thanks again boss
Salute!!!!!!!!!!!!!!!!!!
Glad to hear it
If you now feel experienced enough to upgrade properly, read this thread very carefully http://forum.xda-developers.com/showthread.php?t=310452 (or at least the first post) and then this post: http://forum.xda-developers.com/showthread.php?t=308755
atleast for now i dont have courage.............
This phone belongs to my bro and currently he is out on vacation and when he will come back i thought it will be a surprise that his phone become so good anyways no risk anymore..........
may be next time on my phone only
Well atleast he shouldn't notice the change.
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
absharaslam said:
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
Click to expand...
Click to collapse
No problem. Glad to make a difference
hey guys,
I tried to update the new custom ROM's, but after I ran the new SPL-unlocker (I installed dcd's new rom while at bootloader =))....now I stuck!!!! my phone won't connect to my activesync anymore....it just froze at i guess "startup"?.....have that silver symbol "htc," "smart mobility."
humnz what should i do now? is there anyway of fixing this problem? anyone know???
Thanks in advance guys...
ps. i understand what i did was a purely an idiotic thing....please pull me out of this mess...........
HellpppPp!!! anyone??? Pleaseeeee
I'd try flashing a different ROM. you could try doing the stock ROM, or you could try a custom one like DCDs.
did you run "titanunlocker.bat" and follow all the instructions?
I think if you hold down the power and camera buttons when you hit reset it will come up and the multi-colored boot screen and you can reflash from there.
I could be mistaken on the key sequence. do a search, I bet you can find it if that don't work.
Thread Close!!!!
Thanks For The Help....
OK I got this too on 6.1 the first time.
Listen.
Turn off allow bt connection and actviesync autoconnect when first connected under connection settings.
Put your phone back into bootloader 2.4 and then flash DCD's rom again.
Let us know if that doesn't work.
oops forgot last part.
After successful Flash ... Re-check options you un-checked.
if its hanging at the splash you dont have all parts installed. spl, rom, AND RADIO
Ok i have been trying to just get my phone to work not really looking into getting nething new for it right now but the other day i turned off my phone to charge it and then when i went to turn it back on it was stuck in the bootloader screen if im not mistaken (red green blue white bars) and i cant get it to boot up my phone i tryed useing the never brick method and i got a new spl but dont know what to do after this can someone please help thanks
"Never brick method"? Who's your source for ills and leaving you hanging? What new SPL and what are you attempting to achieve?
Use the Wiki link in my sig (also linked with a sticky thread at the top of the forum entitled 'NEED HELP?? LOOKING FOR GUIDES?? NEW?? Read the XDA-Wiki for the Titan before posting'.
Return back with what you've attempted and read if you still cannot resolve your problem.
my objective is just to have a working phone turned this phone off to charge it and then went to turn it back on and the phone boots to the red green an blue stripes cant get rid of it
i dont know what to do thats why im posting does anyone have a clue where i can start i dont care if it has modified firmware or w/e on it i just want my phone to work i think verizon isnt gonna give me another warrenty replacement so im just wondering if neone can help me fix it without dealing with buyin a whole new phone
marcus556 said:
my objective is just to have a working phone turned this phone off to charge it and then went to turn it back on and the phone boots to the red green an blue stripes cant get rid of it
Click to expand...
Click to collapse
So you are saying your phone is just stock rom and it did this?
Are you sure you have not messed with flashing anything?
what version does it say the SPL is?
you said you flashed an SPL? What version?
These things all need to be compatible versions. This can be fixed pretty easy, but the method to fix it depends on what you have done, and what versions of SPL, Radio, and Rom you had when it broke, and what Versions you have now.. and what you did to try and fix it.
Reply with accurate information and I'll tell you what to do to fix it.
Any method I give you may require an SD card thats less than 2GB and non SDHC. You'll need it formatted to fat32... do you have this?
i dont know if it will help since i am still new to this, but does the power+camera+soft reset reboot the phone back into the bootloader ? and if so can you just reflash via sd card?
maniakx said:
i dont know if it will help since i am still new to this, but does the power+camera+soft reset reboot the phone back into the bootloader ? and if so can you just reflash via sd card?
Click to expand...
Click to collapse
Thats pretty much it... but depending on the SPL it's got to be flashed with the right versions.... so once we know at LEAST what SPL, and hopefully the radio.. it'll be simple.
Also... What provider do you have? (sprint, verizon, etc...)
AND do you want DCD 3.2.6 or do you wanna stay with a stock rom.. I can help you either way.. no difference in ease to get it done.
marcus556 said:
i dont know what to do thats why im posting does anyone have a clue where i can start i dont care if it has modified firmware or w/e on it i just want my phone to work i think verizon isnt gonna give me another warrenty replacement so im just wondering if neone can help me fix it without dealing with buyin a whole new phone
Click to expand...
Click to collapse
marcus, you have start by demonstrating a motivation to help yourself.
Starting a thread with the rather ambiguously useless title of "Help" is already a big no-no.
Second, I have given you the links to the Titan Wiki that will explain what you are seeing and routes to go from there.
Third, people here can directly rehash info from other sources (such as the wiki or their own knowledge) but it's rather like shooting in the dark since you don't seem to be too concerned by helping yourself as you still haven't stated that you have bothered to read the forum's fundamental resources and return to specifically state where you are at.
Common upgrading problems explained and solved is found from the main page of the Titan Wiki under the heading of Problems and Questions
(!Pleeeease read here before posting on the Forum):
P: My device is stuck at the Red, Blue and Green Screen?
S: 1. To exit the bootloader, press the reset.
2. Connect your Titan to your PC's USB and then on your PC execute titan_exitbl.exe
3. You may need to reflash the Radio/Operating system ROM
Click to expand...
Click to collapse
From what you have described, those are the routes to attempt.
ok i never messed with the phone tryin to upgrade it or nething it jus happened one day after i turned the phone off and wwas chargeing it when i tried to turn it back on it was at that screen and i cant get it off so thats all the information i can give u other then that spl-1.04.0000 thats all i can give u sorry im not as smart as some of you guys with this stuff oh and yes i have a card
marcus556 said:
ok i never messed with the phone tryin to upgrade it or nething it jus happened one day after i turned the phone off and wwas chargeing it when i tried to turn it back on it was at that screen and i cant get it off so thats all the information i can give u other then that spl-1.04.0000 thats all i can give u sorry im not as smart as some of you guys with this stuff oh and yes i have a card
Click to expand...
Click to collapse
Sounds like it is a stock Verizon phone pre MR1. If you are not interested in free GPS then get the MR1 update from Verizon and run it with that boot screen on the phone connected via USB to your computer.
If you do want free GPS then follow the WiKi basically starting from scratch with a new phone. You could also try to hard reset the phone and see if it will come back alive as well.
Just to clarify, you can actually get third party GPS working on MR1 (see this thread).
i got a warrent replacement and shouldnt have even mesed with it i went to update to windows mobile 6.1 and it will start to update but make a noise on the computer like it was disconnected and say error my spl no is 2.07.000
i am starting to really hate this fing phone!!!!!!!!!
marcus556 said:
i got a warrent replacement and shouldnt have even mesed with it i went to update to windows mobile 6.1 and it will start to update but make a noise on the computer like it was disconnected and say error my spl no is 2.07.000
Click to expand...
Click to collapse
2.07 I believe is the "Locked" spl from Sprint or used with NueSPL relocker. If you want to flash the latest MR1 update from Verizon, I'm assuming, don't quote me on this, you can do it with this spl. You still may have to "Relock" it to 1.07 or below using Titan-Relocker, not NueSPL's version. What does your phone display now? Still 3 color?
the phone is displaying tita100 spl-2.07.0000 below that it says cpld-9 and at the top right it says ruunbh and where can i get the relocker at?
It's stuck in bootloader mode. Use the attached utility to "Unlock" the bootloader "MODE"
OR....
if you are going to flash to a custom rom... copy a TITAIMG.nbh file to your MicroSD card and hit reset.
its saying cannot open usb port. please make sure, that usb connection in activesnc is disabled. Also make sure, that your usb cable is properley connected. i went an made sure it was disabled and it is connected right
marcus556 said:
its saying cannot open usb port. please make sure, that usb connection in activesnc is disabled. Also make sure, that your usb cable is properley connected. i went an made sure it was disabled and it is connected right
Click to expand...
Click to collapse
Best steps to take....
Disconnect cable.
Get into bootloader mode.
Open activesync and uncheck the Allow USB Connections and Allow Connectsion to one of the following. Click OK to make sure it takes.
Then connect the USB cable.
When Bootloader says USB instead of Serial... then execute the titan_exitbl.exe
ok it didnt work i unplugged everything the cable from the computer the cable from the device and went into activesync and unchecked the boxs went back in to make sure they were unchecked they were then i plugged the cable up waited like you said for the usb and ran the file got the same message......thanks for your patients with me.......
by the way i dont know if u know this but it is stuck in bootloader i cant get into the phone at all so the micro sd card wont work
i just bought my hd2 fromt-mobile and naturally couldn't resist but to modify it
So i installed and flashed the HSPL2 with no problem it worked perfect and very fast and easy....and i installed Mesus Rom and love it did my registry tweeks got the phone running awesome!!!
Now i woke up early was browsing on htcpedia and glanced at the new DOPOD version radio.... well..... it installed fine no errors but when it got to 100% to reboot BLACK SCREEN. I've tried getting the phone into bootloader mode nothing, tried a master reset holding down the volume up and down at the sometime and press power nothing, i've tried to plug it in the computer it recognizes it my computer makes the connected to a device noise but when it goes to initialize the hd2 i get this driver error:
Qualcomm CDMA Technologies MSM failed.
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
the radio i flashed that caused this was 2.051.03(DOPOD)
poulosjr said:
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
Click to expand...
Click to collapse
I hope so for your sake, however... When you say you have a HD2(T-Mobile), do you mean the US one?
Flashing guide for TMOUS HD2 states:
mskip said:
PLEASE READ ALL THE INFORMATION IN THIS GUIDE BEFORE INSTALLING HARDSPL OR FLASHING A ROM/RADIO. IF YOU FLASH AN INCOMPATABLE ROM OR RADIO ON THE 1024LEO THEN THERE IS A POSSIBILITY OF BRICKING YOUR DEVICE SO PLEASE BE VERY CAREFUL!!
Click to expand...
Click to collapse
poulosjr said:
the radio i flashed that caused this was 2.051.03(DOPOD)
Click to expand...
Click to collapse
Is that this one (2.09.51.03)?
Says in the post there it doesn't support 576MB RAM. That would probably mean it's not compatible with the TMOUS HD2. I vaguely remember that being the case for any version with 51 in it.
Sorry to be completely unhelpful here, but I wouldn't have a clue on how to revive your HD2.
Perhaps people in the TMOUS HD2 Flashing guide thread might know something?
----
meptik
chalk another non-starter up to a ..51.. radio on a tmous phone.
still not seen a fix
is the tmobile us hd2 recoverable or is it bricked out?
sorry, not sure. see other threads HERE (post three) and HERE , , it's also mentioned in the mtty and the HSPL (regular HSPL and tmous HSPL) threads.
As far as i can gather so far, roms below 2.10 cause not to boot, but can recover from bootloader, radios with a ..51.. in them cause it not to start at all. (because ..51.. radios don't support the 576mb, presumeably)
Best of luck.
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
brandon2004 said:
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
Click to expand...
Click to collapse
sounds more like a dodgy phone than a bad flash. wait for stock and get it exchanged.
bricked
I have the same problem. I just wanted to go back to stock rom and i downloaded this bull crap rom
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship.exe
BRICKED MY TMOBILE USA HD2!!! DO NOT LOAD THIS ROM!!!!
took it to the tmobile and i now have to wait till tomorrow for them to get more in stock... im pissed!!!
sk8er982 said:
im pissed!!!
Click to expand...
Click to collapse
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
i am...
samsamuel said:
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Click to expand...
Click to collapse
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
they need to remove the .51 versions, i just bricked mine and all i saw really was to not install it, not that it would completely brick it. I'm really upset.
donalgodon said:
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
Click to expand...
Click to collapse
I hope that was sarcasm LOL
sk8er982 said:
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
Click to expand...
Click to collapse
That info is still in the same thread that y'all should have read before bricking your HD2's. Many (and I mean many) of us flash our HD2's all the time, run ROM's custom built to even let us run the latest and greatest Android builds available.
When you and the OP (iirc) get some fresh HD2's, read the info and links in the stickies here. There's enough info in those to get you well on your way to mastering your HD2's destiny.
Best of luck.
So true. ALL chefs always warn ab NOT flashing .51 radios on TMOUS HD2 or they posting links to HOW TO FLASH TMOUS HD2.
Dont rush with first flashing! Thats the best way to brick ur phone!
Always read the forum! Thats the bast way to make ur phone happy
htc hd2 after installing andriod
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
sherko_bax said:
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
Click to expand...
Click to collapse
it is tmous yes? it sounds like he flashed a bad radio,
If that is the case, i would be MAD AS HELL and demand they pay for the replacement of teh motherboard.