Hi
i had an imate jamin and i tried to upgrade it to wm6 today. but after i performed a hard reset my device has stucked in the imate blue screen and didnt boot!!!!
i managed to enter the three color bootloader screen by pressing the camera button while restarting the device, then i ran the RUU_Prophet_220734_2207114_024721_NVID but it constantly gives me the error 260 (cannot connect to device).
i am using vista
what can i do now???
please help meeeeeee!!!!!!!!!!!
can you please stop using words like pleaseeeeeeeeee,help meeeeeeeeeeee?
can you please start reading the wiki first?
can you please read the wm6 upgrade guide second ?
if you have done all of the above,did you understand not to upgrade your device under windows vista,and try to do it under windows xp,because wmdc is causing troubles with rom update utility?
thanks for attention.
Heyyyy
I used xp now but still the same problem
can anybody help me???????????
do you have activesync installed on your windows xp?
yes
i have installed activesync 4.5
but
it cant recognise my phone because my phone just cant boot
even when i try the 3 color bootloader screen (soft reset + camera key)!!!!!!!
any advise on how to fix my imate jamin??
To the user with all the Eeeeeeeeeeeeeeeeeeeeeee's...
Try to look into Wiki, like other members have suggested.
Then you might try to use the search functions in this forum.
And maybe after you have tried these options, you could look into similar cases - like for instance this one: http://forum.xda-developers.com/showthread.php?t=337003
for instance...
Related
I would deeply appreciate someone informing me how to reload the rom on my PPC i-mate from scratch. I completely zapped it . The screen just shows USB V1.01 and thats it.
What do I do from here?
How do I talk to the device to reload the image file?
Is there a hard reset and some kind of installer program to run that the computer will detect the device from this state.
Active synch is not detecting the device i assume because there is no operating system on the device.
Another form said to get a new rom and reflash but how do I do this , where do I start.
Regards Jim Mete :?:
reload rom from boot loader stage
I am interested to know how to reload the rom from scratch.
Jim
Come on, Jim.
The forum is full of topics and postings with the informations you're asking for.
Move your mouse, click on and search the forum.
Chuck
Hope anyone can help me - i' am still stuck - after trying and reading posts for 6 hours. i tried to flash the touch flo w6 rom on my charmer. activesync disconected during the flash proces. charmer does not start anymore - but i can get to bootloader screen.
But all roms i found and tried to flash need an activesync connection. could someone pls let me know how to flash from bootloader without active sync and where to find such a rom - if possible a w6 - if not w5 is also very very welcome!
Thanks a lot in adv!
are you using Vista ?
Good morning Urkraft!
Actually I do - but if nessecary I have ease access to a Computer running XP.
you need to use a PC running XP, then please try to flash the base ROM as Vdlock mention in his thread : http://www.tm-phonedownloads.com/fil...ileUK_Ship.exe
Reset to bootloader then connect teh USB cable to an XP machine and run teh above shipped ROM installer
Please make sure you do this before your goes flat, if you notice now it might not be even charging ...
Charmer is running again! Tks a lot Urkraft
And yes - I tried again - WM6 is running fine!
the link doesnt work is there a new one?
The link is dead... Please.... somebody help
Please update the link, it's dead and i'm in really need. Thanks in advance!
I am using CE OS 5.2.20753 Build 20753.1.4.0 PV SB on O2 Atom Exec. I am trying to flash my ROM with any of the provided ROMS in this forums rite from WM5 till Jamies latest ROM.
As a background, I have already configured my mobile in VISTA laptop using the MANUALS & RAR files, provided around a year back.
The problem is as follows:
1. I run the package, which internally unzips all the files in C:\Windows\Temp
2. DSUU starts executes and provides a screen to select OS, OS+Extended ROM, OS+Eboot only, etc....
3. I tried using both ALL, OS only, OS+Extended ROM but i get the error as mentioned below.
4. I get a screen which speaks about all the my current RADIO, ROM version and the TO BE new versions.
5. I select OK / Continue.
6. Program reboots my Atom exec and stucks in "USB CONNECTED" black screen. This continues untill i try to manually terminate the DSUU process.
7. To recover from this, I remove the battery manually and insert and start the phone.
8. Phone starts working from the stage where I started flashing with new ROM.
I am totally confused as i tried a lot of ROMS rite rom Wm5, WM6 & WM6.1 which also includes all the ROMS, which i have already used in the past on the same phone.
Gurus, please suggest the possible wayout, as i am stuck on this ROM for a long time and unable to test all these new wonderful ROMS.
ASH
use win xp not vista in flashing roms...
Use the search function, there is an answer to Your question in some of the forums at xda-developers and it is posible to flash roms from VISTA, but after doing some reinstalation on USB drivers and some tweaking....try to find VISTA ROM UPGRADE
My experience is:
I followed the instructions and they worked 2 times and I have flashed the ROM twice, I dont know what happened to my computer because after that never again make it to work in vista.
I whish You Could!
Thanks
Thanks for the suggestions. I have flashed this mobile around more than 20 times out of which atleast 10 times in Vista.
My problem is, after flashing the current ROM, i am unable to flash on this device. i tried flashing other device from the same laptop and it works
When i start the flashing procedure, mobile enters into Boot mode and then nothing happens. i remove battery and mobile boots up with the same old ROM.
Please helppppppp
ASh
I tried to install wm6.1 on my SDA2, but an error occured.
When i try to start my phone now, i only get a white display and i can't even load the boot manager by holding the camera button an connecting the USB cable...a connection with active sync isn't possible and so i can't flash it back.
is there a possibility to rescue my SDA2 or is it unpossible to bring it back to life?
thx for your answers
I'm also interested in a solution.
Is it possible to restore the bootloader ?
My phone (SDA II) doesn't do anything after the update crash.
Hi All,
Yes I searched, could not find a helpful post that I could understand (unfortunately a lot of not-so-good english on these forums!).
I used the file 'windowsmobile2003se.exe' here;
http://forum.xda-developers.com/showthread.php?t=230279
It started loading fine, then when it came up with the progress bar to start updating, my device rebooted and is now stuck in bootloader.
When I try himaupgradeut.exe, it gives me a ERROR 101: Connection Error. USB is disabled in ActiveSync and I can see the device as "Microsoft USB Sync".
The USB still works (I can use mtty and xda2unlock in Windows XP and they both work fine). Is the device still recoverable?
I have hard reset (Power + Reset), removed and re-inserted battery and tried a normal reset, none of these work.
Can I please have some step-by-step instructions on how to recover the phone? The bootloader version is 1.06
Thanks.
can you get some pics?
Have you tryed leaving the battery out for 1 day or over night. Because that fixed some problems for me.
try it
flyboy
Yeah I've left the battery out overnight (about 12 hours to make sure the backup battery ran flat). It's still stuck on the boatloader.
It's just got the normal bootloader screen (Serial up top and 1.06 down the bottom) and this changes to USB when in the cradle, so the device seems to be fine.
Any ideas?
Solution found!
I HAVE FOUND A SOLUTION FOR RECOVERING FROM BOOTLOADER!
Full props and thanks go to utak3r of buzzdev.net
Please go to this thread.
http://buzzdev.net/viewtopic.php?f=8&t=36437&start=0
MODS: Please sticky this. Please.
Hi All,
I have made a script that people can use to easily flash their Himalaya without performing all the above steps manually.
My extreme and eternal thanks go to utak3r (from BuzzDev), xda-developers.com and buzzdev.net for building such great communities and for providing so much help and information (even if it is a little hard to follow sometimes!).
You can download it from;
http://members.iinet.net.au/~nomicakes/MakeSDBoot.zip
http://www.clonnyserver.com/uploads/tools/himalaya/MakeSDBoot.zip
The zip file contains the script and the tools neccesary to do this.
As above, if you aren't familar with flashing devices and the possible outcomes, DO NOT USE THIS TOOL.
Hi there,
Yesterday I tried to upgrade my Qtek 2020 to the last rom available but something went wrong and now my PPC only shows the bootloader screen.
After hours of researching on Google I found this forum and this topic. I tried to do what is in utak3r tutorial but I can't connect to my PPC using mtty (usb port can't open) and I don't know why. :\
When I try himaupgradeut.exe, it gives me a ERROR 101: Connection Error too...
And finally when I run this script made by Clontarf it fails on the last step on writing to the SD card. It gives me a Error - Access Denied.
I don't know how to solve this. Would you please help me?
Problem solved!