Related
Firstly, forgive me if this has been covered - I tried searching for this but didn't find an answer...
I'm trying to upgrade my Orange M1000 to WM5 and am worried that I'll totally destroy my machine, so I'm treading as carefully as possible.
I've been following the instructions from xda2jojo but came across something very quickly:
The instructions say to search for nb.nbf. I guessed this might be a typo (?) so I downloaded nk.nbf instead.
I went to patch it but I get an error: "Sorry, this file cannot be patched!"
Also, when in the ROM editor, there is no option for Orange - which should I use instead?
Am I being really dumb or is this a real problem?
Thanks
MkS
The Same Problem in TSM500
I also have the same problem
I tried to patch NK.nbf but it fails, showing the message "Sorry, this file cannot be patched"
I also tried to update my TSM500 without editing this file, but it doesn't seem to connect. And when it connects, it shows a message saying that tuere is a language error.
I used HimaGetDeviceData to get the language configuration, but un file "Devicedata.txt" there is only a "U" and nothing else. There isn´t language nor version number, nothing...
copy the file Devicedata.txt to your pc and open it there.
Use this Himaupgrade file that bypases country and telco identity
ftp://xda:[email protected]/Himalaya_SEs/HimaFiles/himaupgradeut_197.exe
I hope that this help...
Does that also get around the fact that the patch1.exe program claims that nk.nbf cannot be patched?
What this patch for ?
Sorry for question . What this patch for ?
I have no idea, but the instructions for upgrading to WM5 say you've got to patch nk.nbf.
I had the same problem
:arrow: I had the same problem ... so I did upgrade without patching .
By the way Sprite Back Up is not working .
Pocket Informant impossible to install .
Hi - get the same problem with the patch. Am treading carefully too to ensure i don't have an expensive paperweight.
Anyone know if the patch is mandatory or is the file linked via the wiki for w2k05 ROM already patched and ready to go and therefore need to skip this step according to the FAQ
Thanks
Finally updated
Finally I got my xdaII updated. I didn't patch nk.nbf, I only uploaded the file.
The xda started correctly, and after an hour since I updated it, I only saw that the buttons "camera" and "recording" (left side of tha xda) doesn't seem to work.
I think that the memory is too low. Maybe I chose a wrong version of WM2005.
Storage
Total: 14.57 MB
In use: 1.74 MB
Free: 12.83 MB
Program
Total: 24.35 MB
In use: 14.94 MB
Free: 9.41 MB
Anybody else have the same memory problem?
Thx
(Pd: Voice recording key only works when display is off)
patch NK.nbf but it fails
hi guys
I also have the same problem
I tried to patch NK.nbf but it fails, showing the message "Sorry, this file cannot be patched"
Can any one help us
tKS
Upgrade successful
I had the same problem. I did not patch and performed the upgrade. Everything works fine except the record and camera buttons. Vito Button mapper does not help either, but it does allow you to make the contact & calendar buttons multi-functional so they can replace the for-now missing buttons.
Good luck.
Who else to ask ?
I did PM to xda2jojo and I have no answer ? probably he is busy .
sorry to edit this....give me time to edit the procedure---xda2jojo
if you received the "Sorry, this file cannot be patched" error message ..
there are only two reason .. maybe you downloaded a corrupted nk.nbf ..
exact size of nk.nbf
1.50f.00WWE
is 33,554,496 bytes(32,769kb)
1.50f.blWWE (BuzzMobile 2005)
is also 33,554,496 bytes(32,769kb)
but if you think you downloaded it right and still receive this error ..
it only means that you downloaded a already patched ROM and no need to patch it anymore ..
just skip the procedures about patching the rom
and go directly to upgrading
now if you receive a country id Error .. just use modified Himaupgradeut.exe
read the wiki
http://wiki.xda-developers.com/index.php?pagename=Himalaya_2005
to know where you can get the file
Thanks
Thanks
That's cool - thanks!
Bugger - I had to go back down to 2003SE.
No MMS, no Messenger, and no working Activesync. It looked so great too. It was the MMS and Activesync issues that were key for me though. Will wait till a definitive fix is found and try again.
Thanks for your help, though, guys. If I hadn't tried, I'd never know.
Messenger works OK on mine. Activesync works OK on my laptop, but not my Desktop. MMS doesn't work though, yet.
same problem
hey ppl i 2 have the sameproblem my file size of nk.nbf is 32,769 kb is that ok i also do not ahve active sync 4 installe dnither do i have service pack 2 isntalled is it sensible 2 insatall or will it screw up myprecious xda2?plz let me kno asap
thanx
This is how i did it, works to the T 4 me (I Have A Zipped NK.NBF)
Step 1
Unzip From First Part, (It Should Automatically Unzip Second Part)
(Ignore this if you already have unzipped NK.NBF)
Step 2
Using WM2005patch1.exe Patch The NK.NBF File
Step 3
Using ER2003Edit Change The Country Code 2, O2 WWE
Step 4
Run HimaUpgradeUt.exe
Step 5
Once All Installed Reboot Fone And Run ExtROM_WM2005.cab,
ExtROMUnlocker(for_WM2005Only).cab And BuzzWM2005RAMDisk-Full.cab
2 unlock hidden memory!
(Shows 124mb Ramdisk & 15mb Storage formaly known as ExtRom)
Not sure if there is updated ramdisk or not...
My activesync 4 works flawlessy With Win XP Service Pack 2,
MMS Doesn't Work For Me Either,
I have downgraded back 2 wm2003se for this reason...
Well just untill Someone gets it running again...
Good Luck, & Ave Fun! The general layout onWM2005 is great.
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
Someone reported the same problem as me with Crystal V1 here: http://forum.xda-developers.com/showthread.php?p=1499973&highlight=certificate#post1499973
I'm having this same problem with Touch V7. CE Star (or all other SIP input methods for that matter), the program simply doesn't install at all!
for CE Star, the shortcut does appear in the program list, but launching it will say "winxe cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
is there anyway to solve this issue? i'm on the verge of smashing the phone already!
appreciate all helps! =)
no one knows why?
Stratix said:
Someone reported the same problem as me with Crystal V1 here: http://forum.xda-developers.com/showthread.php?p=1499973&highlight=certificate#post1499973
I'm having this same problem with Touch V7. CE Star (or all other SIP input methods for that matter), the program simply doesn't install at all!
for CE Star, the shortcut does appear in the program list, but launching it will say "winxe cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
is there anyway to solve this issue? i'm on the verge of smashing the phone already!
appreciate all helps! =)
Click to expand...
Click to collapse
i installed CE-Star without any problem....... penpower hand writing works good too.
btw.... which version of CE-Star u installed?
The problem is not consistent and therefore it's hard to isolate the cause. One member managed to get rid of it by reflashing and start all over again.
the first step to sort the mess out
rondol1 said:
The problem is not consistent and therefore it's hard to isolate the cause. One member managed to get rid of it by reflashing and start all over again.
Click to expand...
Click to collapse
I'm under the impression that users sharing this problem seem to install Ce-star before things weng wrong. I used to install the one and only one application, Ce-star, to Gullum's roms including V7.
Many other dlls being trigered by apps whose shortcuts been put into the startmenu folder from the SD card rather than fully installed, of course, might also have a hand in the fault.
So, my idea is users having the same problem leave a note to tell whether Ce-star's installed as a first step to sort the mess out.
Certification of files...
I usually post on the Univeral forums but if you have a problem with certification of files you may try this cab file - hopefully it will help (though since it was originally in Helmi's WM6 1.1 ROM I take no responsibility for it causing problems though! )
View attachment SdkCerts.cab
Hello everybody...
This Message I left on an other thread for someone who asked for experience in using this app on a wm 6+ system:
"Just tested pocket Radiologist v2 on a stock 6.5 system of the htc HD2 and ready to revive this thread by now!
1. ADOCE had to be installed - otherwise the executable of the the app ****s up the executing.
2. installation of adoce is a bit tricky ... switch the OS-language (wm5 or 6 or 6.5) to englisch (british) if you use a foreign system. finally restart & install ADOCE. no matter if you switch back to your native language after installation.
3. start pocket radiologist - works but...
4. on the thc hd2 the font/character size is wrong. the toolbar/list which should be docked on the bottom of the screen floats about the half of it. trying to switch the screen to landscape with bsb tools doesnt work. I'm very sorry for this now!
5. Tried WVGA Fix 4 already - the characters' still far too big..."
Anyone's got an idea how to fix this character a/o resolution-problem?
Hope someone can help in the end.
I'm using the palm version on the palm emulator, works ok. the images are not great
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
jsmccabe78 said:
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
Click to expand...
Click to collapse
I did only the install procedure as described. first adoce, second the needed module. i installed it on main memory. execution after installation in that order made me no pain. i didn't transfer anything at all.
hope someone can solve the problem with this software...
Install completed succesfully, but I have the same problem as ppcppcppc (TS), so I hope someone can give input about a possible solution??
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.