Net monitor for Dual... - Touch Dual, MDA Touch Plus ROM Development

hi to everyone,
I'm new WM user and i 'd like to install a program like spb GPRS to monitor the Internet connection, but it should also work on UMTS and HSDPA channel, not only GPRS connectivity.
Could anyone help me?
Bye

spb gprs monitor IS also working for your umts / hsdpa connection.
go to the settings and select all your internet connections as to be monitored.

hi, try this sequence
*#*#364#*#*
it work.

sorry, you only know if you try first to see if you have hsdpa coverage, in this sequence.
its not really what you want but it will help, i beliave

see in \windows\fieldtest.exe - connection info

Related

How can I stop GPRS from O2 XDA ?

Hi
In my country, Viet Nam, have 2 GSM providers: Vinaphone & Mobiphone.
With Vinaphone sim, I can use GPRS & make call or answer without any problem
But with Mobiphone sim card, GPRS confict with GSM, so can not make call or answer any call,
The problem here is GPRS from Mobilphone, I can ask mobiphone to stop GPRS for my Mobil simcard, then can make call without any problem.
The question is: Can I stop GPRS from O2 XDA , not from Mobiphone System.
O2 XDA II can work with mobiphone with GPRS without any problem
Pls help.
Thanks & Best Regards
Hai Nguyen, you could delete your GPRS connection settings - no settings,
no GPRS! If you just wish to stop GRPS after using it for a while, press
and hold the red key for a few seconds, and that should disconnect you.
I am surprised that VMS and Mopiphone have a different setup - in almost
all other respects they are very similar, since they are heavily leglislated.
The only real difference I have found is on hte edge of their rural coverage,
especially around Long Xuyen.
Good luck anyway,
Dave.
There is a Freeware where you are able to choose whether you want GPRS to stay connected once you no longer use it. It installed ok on my unit, no strange behavior.
http://www.gb-soft.cz
Thanks all for your help
But the problem here is not GRPS software, This is a GPRS signal conficted with GSM Signal
GPRS software, connect or not is not this problem
I call Mobilephone to stop my GPRS so I can use Mobiphone simcard with O2 XDA (Running SX56 2003 rom, Radio Stack 4.21),
When I call back Mobilephone to active my GPRS signal. this problem come.
SO
This can not use GPRS software to stop or solve.
It is only solve by stopping GPRS signal from provider, so I look for the way to stop from handphone (some modify in registry or radio stack)
Pls advise

Newbuy question: No [3G] sign... Only [G] or [E]

Hi,
Apologies for this question, but i cant get 3G sign in my mobile, while other Nokia n73 can get it. I updated my radio to v1.43, and still no [3G] sign...
In some areas i get [G] which means GPRS signal, and in other areas i got [E] which i don't know what does it mean... Any ideas??
Thx in advance
E = Edge...
Thanks Madcap... But as far as i know that Edge (EGPRS) is an extended version of GPRS whilst 3G is based on WCDMA.
My question now is why my Nokia n73 Reading always 3G, and my HTC is not reading it??? Is there is something wrong in HTC? or i must do some settings for that one?
Thx
pop20032004 said:
Thanks Madcap... But as far as i know that Edge (EGPRS) is an extended version of GPRS whilst 3G is based on WCDMA.
My question now is why my Nokia n73 Reading always 3G, and my HTC is not reading it??? Is there is something wrong in HTC? or i must do some settings for that one?
Thx
Click to expand...
Click to collapse
Hello,
You say that your Nokia can receive a 3G signal and the Hermes cannot - are they both using SIM cards from the same provider and if not then do both providers supply a 3G signal where you are trying to use the Hermes?
If you should be able to receive a 3G signal on your current provider then I'd suggest you try the following:
1. Check the settings of the Hermes Phone. Try looking at the band selection setings by going to Settings - [Personal] Phone - Band Tab then checking that the Network type is set to Auto. The screenshot below shows the screen that I mean. If this is set to GSM then change it to Auto and see if that fixes the problem. If not then try...
2. Force use of 3G. Even with Auto selected your Hermes handset may be using 2G because that signal is much stronger than the 3G signal. You can force the handset to try 3G only by using a 3rd party application such as Bandswitch (an excellent product by Daniel Herrero - see his posts here: http://forum.xda-developers.com/showthread.php?t=286844&highlight=bandswitch). You can download Bandswitch here: http://commmgrpro.com/_wsn/page2.html. Try using this application to set the handset to 3G and see if that works.
If you should have a 3G signal but none of this helps then it seems you have a problem that may need warranty attention. Is the handset new?
Hope this helps
Hello Tony,
Thank you for your reply. I tried what you advised. Still Cant Capture the 3G signal...
Also, i tried an application called "fieldtest_157.exe". It is described somewhere in this group. I can't find any signal (zero values) for anything related to WCDMA, UMTS, and 3G
This is weird.. I just went into settings>phone .. and there is no BAND tab.. wtf?
Madcap180 said:
This is weird.. I just went into settings>phone .. and there is no BAND tab.. wtf?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=283797http://forum.xda-developers.com/showthread.php?t=284201
Mike
Hi Mike,
Have added this reg tweak. It added WCDMA & a couple of protocols in the band section of phone settings. Non of them is working... Is it possible that my radio has a problem? I'm using GPRS very well, and i have excellent GSM connections... What could be the problem?

AT&T/Cingular Internet Settings for HTC S740 in U.S.A

Hi, I need help a.s.a.p
I just bought a Data Only Package for the HTC S740, I'm having problem accessing the Internet w/ the phone. I keep getting Connection Error & telling me to verify my Settings. Can someone please help me set it up or is there a place where I can download the settings. I need it set-up as soon as possible.
Thanks
Closest thingie I've found is here. Nevertheless, if it's really s740 (not s743), you can expect only GPRS/EDGE and WiFi hotspots connectivity. European s740 will not work on american 3G networks (unlike s743).

X10i fluctuates between HSDPA & EDGE, doesnt browse or connect to the web on EDGE

Hi,
I am an android noob and would really appreciate some help here. I recently acquired a Sony Ericsson Xperia X10i running on Gingerbread 2.3.3. The phone however has failed to live up to my expectations as its connectivity to the internet is very terrible. The mobile networks in my location provide either 3G or HSDPA. The phone however is predominantly on EDGE and even then there is no connectivity with EDGE. Only Opera Mini manages to pull down pages after many minutes of requesting the page and constant refreshing. The same SIM when inserted in a USB Modem dongle gives stable HSDPA internet connectivity. When connected to HSDPA though, the phone's connectivity i trouble free. My question is: Why am I unable to browse or use any of the apps (facebook,play store, twitter, bbc news, Y! Messenger etc) with and EDGE connection? I have tried to restrict connectivity to only WCDMA in settings but this only results in long periods of loss of network on the phone. Help please. I need the phone to operate on EDGE as well as HSDPA as most parts of Nigeria has EDGE coverage with HSDPA only being rolled out in stages in select locations. Thanks
airsay said:
Hi,
I am an android noob and would really appreciate some help here. I recently acquired a Sony Ericsson Xperia X10i running on Gingerbread 2.3.3. The phone however has failed to live up to my expectations as its connectivity to the internet is very terrible. The mobile networks in my location provide either 3G or HSDPA. The phone however is predominantly on EDGE and even then there is no connectivity with EDGE. Only Opera Mini manages to pull down pages after many minutes of requesting the page and constant refreshing. The same SIM when inserted in a USB Modem dongle gives stable HSDPA internet connectivity. When connected to HSDPA though, the phone's connectivity i trouble free. My question is: Why am I unable to browse or use any of the apps (facebook,play store, twitter, bbc news, Y! Messenger etc) with and EDGE connection? I have tried to restrict connectivity to only WCDMA in settings but this only results in long periods of loss of network on the phone. Help please. I need the phone to operate on EDGE as well as HSDPA as most parts of Nigeria has EDGE coverage with HSDPA only being rolled out in stages in select locations. Thanks
Click to expand...
Click to collapse
Try to change the network mode to GSM/WCDMA preferred.nd in ur area if there is no full coverage of hsdpa.then the network mode fluctuates to edge to hsdpa.so if u want nly 2g.then select GSM only.then the network wnt fulctuate to hsdpa.
if helped hit thanks
any other queries reply
hi,
thanks for the reply. that solved the issue of the flunctuation. but i really need the phone to browse on 2g because I'm often at remote rural places where you'll dance for joy if you have 2g coverage. why is the phone unable to utilize 2g. thank you
Sent from my X10i using xda app-developers app
airsay said:
hi,
thanks for the reply. that solved the issue of the flunctuation. but i really need the phone to browse on 2g because I'm often at remote rural places where you'll dance for joy if you have 2g coverage. why is the phone unable to utilize 2g. thank you
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Lke you said if its hard to get a 2g connection the x10 may not be capable of it for some reason in your area :/
If u want to switch between 2g n 3g ,that depends on.ur network provider ( I in India went and ask Docomo service company if I could switch between 2g( EDGE) AND 3g . I got a flat ' no ' reply) .
If u only want 2g go to network settings, and change to GSM only. It may work provided ur service provider doesn't use 3g on it.
Sent from my X10i using xda premium
Just switch your network to GSM only in network settings and it would only pick up 2G.
Sent from my X10i

[Q] how to enable 2G mode

hello to all i have recently purchase a tab but there is a problem with the internet connection when ever i plug my dongle it only catches 3G network
not 2G i have tried to go to setting but i can't find anything i have found there is a option in access point to connect with ehrpd network and lte network there is nothing like 2g or Gprs help me to find it guys i need it !
i am on ics

Categories

Resources