I have a Verizon 6800 and being stupid I installed the 3.16.651.0 Sprint Rom on my phone. I reverted back to the original Verizon stock rom with no problem and I'm back on the Verizon network.
But now I have installed DCDs Verizon beta 2.0 rom with the new radio and somehow I am stuck on Sprints towers again. I can tell because it tells me *228 isn't a valid feature code.
My guess is that the "unofficial" Sprint Rom wrote something to the phone that the new radio rom refers to when installed. Is there a way to get it to the Verizon network with the new rom and radio installed?
ryotgz said:
I have a Verizon 6800 and being stupid I installed the 3.16.651.0 Sprint Rom on my phone. I reverted back to the original Verizon stock rom with no problem and I'm back on the Verizon network.
But now I have installed DCDs Verizon beta 2.0 rom with the new radio and somehow I am stuck on Sprints towers again. I can tell because it tells me *228 isn't a valid feature code.
My guess is that the "unofficial" Sprint Rom wrote something to the phone that the new radio rom refers to when installed. Is there a way to get it to the Verizon network with the new rom and radio installed?
Click to expand...
Click to collapse
try and load a verizon PRL.
dcd1182 said:
try and load a verizon PRL.
Click to expand...
Click to collapse
Thanks for responding. But I am having trouble locating one. Do you have a link to a download?
I found a PRL from 2004, would that be too old?
Try here: http://www.corolada.com/prl/
JimSmith94 said:
Try here: http://www.corolada.com/prl/
Click to expand...
Click to collapse
Thank you so much
Fantastic, I am back on the Verizon towers for phone calls.
But now when I try to use the data I get an error:
Error Code: 11
PPP Connection Error
Any clues how to get data back?
ryotgz said:
Fantastic, I am back on the Verizon towers for phone calls.
But now when I try to use the data I get an error:
Error Code: 11
PPP Connection Error
Any clues how to get data back?
Click to expand...
Click to collapse
maybe try a hard reset then dial "*228"?
TopGun2000 said:
maybe try a hard reset then dial "*228"?
Click to expand...
Click to collapse
I tried that and still the same error. I even put the Stock Verizon Rom on and same thing.
ryotgz said:
I tried that and still the same error. I even put the Stock Verizon Rom on and same thing.
Click to expand...
Click to collapse
When I was still w/ vzw, I once logged into my online account and disabled/enabled my data feature to make it work ... give it a shot
Try this to see what your settings are
1. ##778
2. View
3. View Info soft key (bottom left)
4. Modem settings
this is what i have
slot cycle index 2
Preferred serving Auto
Preferred Mode Auto
Hdr Hybrid Enable
Clear mru No
5. View info again
6. Data Parameters
Packet Dial #777
then cancel
if all of that is right then go to settings and set up a new conn. if you need help on that just let me know
if any body else thinks of any thing else please let me know to.
s10onn2o said:
Try this to see what your settings are
1. ##778
2. View
3. View Info soft key (bottom left)
4. Modem settings
this is what i have
slot cycle index 2
Preferred serving Auto
Preferred Mode Auto
Hdr Hybrid Enable
Clear mru No
5. View info again
6. Data Parameters
Packet Dial #777
then cancel
if all of that is right then go to settings and set up a new conn. if you need help on that just let me know
if any body else thinks of any thing else please let me know to.
Click to expand...
Click to collapse
All of my settings are setup just like yours. When I was on the phone with Verizon we created two new connections and didn't work either.
To rule out being a tower refresh issue, I am going to put a non-pda phone on my account then put the 6800 back on.
ryotgz said:
All of my settings are setup just like yours. When I was on the phone with Verizon we created two new connections and didn't work either.
To rule out being a tower refresh issue, I am going to put a non-pda phone on my account then put the 6800 back on.
Click to expand...
Click to collapse
Ok that didn't work either. So it is something definitely on the phone itself. Any ideas anyone?
AKEY?
are you getting an authentication error when dialing *228 or *86? If so, then your AKEY is probably blank. You'll need to contact VZW for it. I might have to call them again cause me being an idiot didn't write it down when I called them for it the 1st time.
I'm getting authentication errors again and lo and behold, my AKEY is missing. I didn't even do a hard reset or flash another rom/radio. Weird.
I'm getting the same error now. I just got my A-Key refreshed from VZW tech support, but now I can't connect to the data network.
Same error here. I updated to new Sprint rom and DCD 3.0.1..
I think i messed up the first time and let Sprint customizations run. I have tried to flash back to original vzw rom, but still can't connect to data network. I have had vzw gen new A key and refresh my data package.
Anyone have a solution for this?
Vancelot said:
Same error here. I updated to new Sprint rom and DCD 3.0.1..
I think i messed up the first time and let Sprint customizations run. I have tried to flash back to original vzw rom, but still can't connect to data network. I have had vzw gen new A key and refresh my data package.
Anyone have a solution for this?
Click to expand...
Click to collapse
Search my posts from 3/11. I posted a solution.
Geckotek said:
Search my posts from 3/11. I posted a solution.
Click to expand...
Click to collapse
I can't find a solution for re-flashing the radio - what did you do there?
I think you did flash the Sprint rom - and let the customs run - are you fully resolved there (*226, epst @ 000000 etc...)?
josh77b said:
are you getting an authentication error when dialing *228 or *86? If so, then your AKEY is probably blank. You'll need to contact VZW for it. I might have to call them again cause me being an idiot didn't write it down when I called them for it the 1st time.
I'm getting authentication errors again and lo and behold, my AKEY is missing. I didn't even do a hard reset or flash another rom/radio. Weird.
Click to expand...
Click to collapse
Just for sanity, the AKEY is always blank. You can't see it after you enter it on Verizon. You also can't re-use it. It's a one shot deal.
I have had this error regardless of any rom (DCD or NexVision). The issue is not being able to connect the vzw network. I don't receive it when I am on wifi but I do if there is a wifi I cannot connect to due to a security key. BTW I have a data block. I phoned support once on the issue and that is the best they could do. Sorry if this isn't helpful.
Related
Carrier: Alltel
Started with WM5 ROM.
Flashed to DCD's 2.1 WM6 ROM last week, no issues noted.
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
I've moved back to 2.1, used no2chems 6.1 ROM and back to DCD's 6.1 ROM. Same problem all around now.
Radio problem maybe? Or user? If radio, anyone get me a link to the original 1.4?
Thanks in advance if anyone has any tips, I've tried looking around but only find people with MMS or other issues.
---------------------
This solution apparently only works for Alltel customers, if anyone finds solutions for Sprint/Verizon/Telus I'll add the solution to this post.
ALLTEL:
1. Enter EPST (##778), Edit (password= 000000).
2. View Info (left soft key).
3. Choose the "Security" item.
4. In the "HDR AN AUTH Password(LONG)" field, click to highlight.
5. Menu (right soft key), Edit
6. In the "Value" field, enter your Hex ESN (make sure all characters are CAPITAL, lowercase will FAIL).
7. Ok. Menu. Ok to save, then reset.
--------------------------------------------
SPRINT:
MADMARTlGAN said:
Hey in case you guys are still having problems with this, I can tell you what worked for me with Sprint.
You'll need your unlock code, if you don't have it, you've gotta get it from either Sprint or from one of the tutorials i've seen floating around here and other forums.
1. Sync your titan to back up your data.
2. ##786# Choose edit, enter your unlock code, then choose menu>restore. This will reset everything to factory settings.
3. Reset
3. ##UNLOCKCODE# Again choose edit.
4. Both MDN and MSID should be your wireless number (this was confirmed by Sprint T2 tech support)
5. Reset
6. Call your voicemail to make sure your phone service is working.
7. Connect to the internet. It should trigger IOTA/Provisioning and then EVDO should be working.
8. Resync your **** and you're good to go.
Hope this helps, it worked for me.
Click to expand...
Click to collapse
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Americanmetal said:
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Click to expand...
Click to collapse
Thanks for the response, I've been through that already and same results...
I even went back to the stock Alltel ROM and Radio, same thing.
With PRL 30029 AND 40029...
Oh well, I'll figure something out as I love the speed of DCD's 2.2!!!!
jake1s said:
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
Click to expand...
Click to collapse
Did you check Start->Settings->Personal->Phone->Services->Mode of Operation to make sure it wasn't set to 1X only? I think that was the default setting on my phone.
I had this same problem, and then I reflashed with the 3.16 sprint rom twice and it went away.
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
jake1s said:
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
Click to expand...
Click to collapse
With the newest Advanced Config app, you can unhide the "mode of operation" option in there. I got it from here somewhere, do a search. I doubt this is your issue. I had this problem yesterday with Sprint. I got data in 1xRTT, but not EVDO. I ended up calling Sprint and they had to deactivate and reactivate the internet services on my phone. Immediately it worked like a champ.
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
THANK YOU! THANK YOU! THANK YOU!
That did the trick (after I did it a second time and made the letters capital) and now I'm cruising EVDO style!!
Thanks!!!!
Hi I have this same issue.
i typed ##778 send
and get the view, edit , and cancel options.
do i find the hdr password under the edit?
when i choose edit, i get a password prompt and i do not know the password.
i am on dcd rom 2.2.0
i edited mine, and it does get on ev instead of 1x so i was glad but when i opened ie i cant get a data connection up now at all???
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
My HDR password is also extended ASCII characters, has been for every ROM version I have run, and I get EVDO and on the Internet as well. I thought that was a problem when I had no data connection from a previous ROM, but it wasn't.
What worked for me was to go all the way back to the official 2.17, then to the leaked 3.16, etc. I made sure everything was set up and working properly on each version before moving on to another ROM.
excess4 said:
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
Click to expand...
Click to collapse
not true there is a program to find out the msl code for your phone if i was on computer i would give u guys the link
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
Again, I'm on Alltel so maybe for some unknown reason there is more to it for you Sprint users.
But, my MDR Password field was goofy stuff, deleted it and put in my Hex ESN in ALL CAPITALs and I stay at EVDO when my data connection is made now.
Deleted MDR PASSWORD and put esn hex, internet not working
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
yes i also have a bunch of giberish in there. i am afraid to change it becuase there will be no way for me to put that giberish back in there with all those weird looking characters.
i found the edit password which was a bunch of 00000 as many as the field would take
and i understand some people now get ev but no data connection now. i am on verizon and i dont know if that will happen to me as well.
my connection now says ev and doesnt change back to 1x anymore so i am going to leave this as is for now and not change it.
also my a-key is blank if that makes a difference. phone works fine though.
whatbish said:
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
Click to expand...
Click to collapse
you mean hdr password right? I did not see an mdr password listed anywhere
I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
jamesfelarca said:
I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
Click to expand...
Click to collapse
It sounds like you let the Sprint customizations run. Sound about right?
Here's what I had to do after the Sprint customizations locked me out of the PST:
Geckotek said:
I flashed back to the stock VZW ROM (third time I think), I made sure all of my provisioning issues with Verizon were worked out (finally had the tech "kick the switch").
1) Then I proceeded to load the 2.4 bootloader,
2) then the 3.16 Unauthorized Sprint ROM w/ radio,
3) then finally installed a cooked DCD 2.3.2 ROM.
Things to note:
1) I never let the Sprint ROM boot up
2) I had no signal so ran *22802 then hit End as soon as it connected
3) Still no signal after reboot
4) No A key, MSID, or MDN issues, but I did re-enter the MSID and MDN as discussed in other threads
5) After re-entering MSID and MDN then after reboot I had signal
6) never had to run *228 to OTA program (in the past programming with *228 has reversed the effect of re-entering the MSID and MDN)
In general, I feel that the OTA from VZW sends down some programming that conflicts with the 3.27 radio...but I have nothing to prove that.
GPS is running great (I just loaded the AstroGPSLauncher)
Not sure about Rev A. It does seem snappy. What's a good site to test from the phone?
I'm happy and not re-flashing until a solid radio for Verizon arrives.
Click to expand...
Click to collapse
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
I have Alltel and DCD's 1.7.x ROMS are GREAT! No GPS but I don't need it.
you have a link to the ROMs??
jamesfelarca said:
you have a link to the ROMs??
Click to expand...
Click to collapse
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
jamesfelarca:To change the PRL you can put ##775 in the dial pad and send. Then enter the 000000 for the unlock code and select update PRL ->Menu->Edit and select the current PRL (probably a good idea to have this on your memory card) http://www.corolada.com/prl/ The one you want is 30031. Also you may want to do the ##778 unlock code 000000 and then check the NAM settings MDN and MSID should be your 10 digit number.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
A) What my instructions help with is flashing a Sprint ROM to a non-Sprint phone
B) My instructions show you the only way I've ever seen how to remove the MSL from the phone.
So if you want your phone to work correctly, I suggest you give it a try. Your mistake was letting the Sprint customizations run....as far as I know, that is not easily reversible.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
Click to expand...
Click to collapse
Based on my experience, reflashing the ROM doesn't remove the MSL lock applied by the Sprint ROM. That's why I reverted to the stock bootloader and ROM/Radio.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine.
Click to expand...
Click to collapse
Glad it works for you. I had problems with the radio. I was only receiving about 2/3 of sent SMS and OfficeSync did not update properly.
Here is a link to DCD's 1.7.0 here: http://forum.xda-developers.com/showthread.php?t=372853
I used the kitchen and it works very well for me.
i have alltel and update my ppc6800 fine all i had to do to remove the indicator icon was to do *228 option 3 wich is activate.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
I'm not sure how to change the MCL back to 000000 but if you haven't already you should be able to use GetSPC to obtain the code for your device. Once you're in EPST check your Home SID to make sure this is correct. If not there's a good chance you'll be roaming all the time. Also make sure you have the newest PRL (*228 Option 2)
For your internet connection, check EPST Security and M.IP Default Profile and make sure your NAI and UserIDs are set to your phone number @alltel.net and your AAA shared secret and PPP Password should be "alltel" without the ". Your HDR AN AUTH Password should be your ESN (Hex).
I recommend dcd 2.32 also. It's what I'm using and it's working great.
Sounds like everyone else covered the how to's... but before you try anything else you might want to wait for DCD's new kitchen which will work with the official radio released for Sprint today.
Roaming Order
Does anyone know if there is a way to change the order of carriers my phone tries to roam to?
I have Alltel and apparently Sprint is at the top of there list. I live in an area where Sprint service sucks and there is no EVDO, but the Sprint tower is just close enough to be seen so I never get onto the Verizon Towers. I would like to set my Roaming order to be Verizon first then Sprint etc...
Thanks,
mr.ellsworth
I just updated to the current Alltel 6800 ROM. After setting up the phone and doing a hard reset, I noticed I have no data connection. I put in my#@alltel.com in the connection settings for the Alltel wireless connection. Tried *228 to update either the PRL or activate the phone, but get a message that programming could not be completed. I've tried to ##775 and ##778, but 000000 is not accepted when I'm asked for the unlock code. Any suggestions?
just got off the phone with Alltel
They had no idea what was going on. I spoke with their level one and two reps and they referred me to the insurance replacement number (glad I paid for that!). It's weird since I can make and receive calls on the phone.
**228 Not working
I upgraded to the new Alltel ROM and am having a problem when I dial **228 I can't do either option '2' or option '3'. I am able to receive and send calls and my data connection works fine, but I've got a flashing triangle on the today screen saying that I'm roaming. I talked to Alltel and they didn't give me any help. Does anyone know what I'm doing wrong?
Thanks,
Keir
Keir333 said:
I upgraded to the new Alltel ROM and am having a problem when I dial **228 I can't do either option '2' or option '3'. I am able to receive and send calls and my data connection works fine, but I've got a flashing triangle on the today screen saying that I'm roaming. I talked to Alltel and they didn't give me any help. Does anyone know what I'm doing wrong?
Thanks,
Keir
Click to expand...
Click to collapse
Are you performing **228, or *228? If so, that's your problem right there. You only need to dial with one "*".
Verify what's the PRL version in your phone. If you're area has EVDO it should be 40036, if not, it should be 30031.
Keir333 said:
I upgraded to the new Alltel ROM and am having a problem when I dial **228 I can't do either option '2' or option '3'. I am able to receive and send calls and my data connection works fine, but I've got a flashing triangle on the today screen saying that I'm roaming. I talked to Alltel and they didn't give me any help. Does anyone know what I'm doing wrong?
Thanks,
Keir
Click to expand...
Click to collapse
If you can't get it working from Gelial's instructions, you may also want to check the SID in EPST. After I upgraded and activated, it still didn't set my SID correctly for whatever reason so I was roaming all the time. You can manually go in and change it in EPST assuming you wrote it down beforehand.
kirzan said:
They had no idea what was going on. I spoke with their level one and two reps and they referred me to the insurance replacement number (glad I paid for that!). It's weird since I can make and receive calls on the phone.
Click to expand...
Click to collapse
Sounds like somethings not setup right in EPST but if you can't get in.... that's a whole other issue. I didn't have any problem with the upgrade changing my unlock code, I did see this in the past with the Sprint upgrades though. You may want to try GetSPC to see if the MSL code it generates for you works. It may be worth a shot...
I've since solved my boot screen issue. I've installed :
dcd 3.2.5
Titan_Radio_ROM_3.42.30
dcd USCC Carrier 20080801
I have no data connection, I deleted it says my username and password are incorrect. I've tried every combination of my 10digit number and uss.net that I can think of. I've also reinstalled the uscc carrier cab, did the *228 and a soft reset. I can connect for 2 kilobyts then after that I can't connect. I'm not finding much on these forums to help me out. Does anyone have any ideas?
additional info
Sorry, the phone is a USCC 6800
hey just to let you know I have the 6900 and I dial #777 not sure if u wanna try that
I've had the same problem everytime I change ROMS. I have Verizon and found after I've "activated" the phone using the *228 then option 1, I then do *228 and option 2 (update my roaming capabilitys). That has always enabled my data connection.
kmanuel74 said:
I've had the same problem everytime I change ROMS. I have Verizon and found after I've "activated" the phone using the *228 then option 1, I then do *228 and option 2 (update my roaming capabilitys). That has always enabled my data connection.
Click to expand...
Click to collapse
If that doesnt work and you have an old cell phone around you can swap the ESN's on VZW's web site under customer service. When you do this you reset all the security information for the handset. I find this way to be the quickest method that has never failed. I use it so much I have the other ESN almost memorized!~
Scott
k3an said:
I've since solved my boot screen issue. I've installed :
dcd 3.2.5
Titan_Radio_ROM_3.42.30
dcd USCC Carrier 20080801
I have no data connection, I deleted it says my username and password are incorrect. I've tried every combination of my 10digit number and uss.net that I can think of. I've also reinstalled the uscc carrier cab, did the *228 and a soft reset. I can connect for 2 kilobyts then after that I can't connect. I'm not finding much on these forums to help me out. Does anyone have any ideas?
Click to expand...
Click to collapse
Run EPST and make sure that your PPP user name and password in there are correct.
If you didn't back up your phone's programming with QPST before and after flashing there is a chance that your EPST information is corrupt which would cause data to not work.
You will need your SPC/MSL in order to access EPST. You can try 000000 if nothing else works, and if it is 000000, you will need to set it back to the correct SPC/MSL otherwise *228 won't properly update your phone. Also USCC doesn't offer an option 1 or 2 after dialing *228, they don't have an OTA reprogramming of their phone.
If those changes don't work, you can try posting your entire EPST on here (removing any personal info, i.e. phone #, ESN, etc) and one of us USCC folks can compare it to ours and let you know what other areas look corrupt.
This is the one downside to USCC customers, we have to take extra steps while programming our phones to get them up and running, luckily it's a one time thing, once the phone is flashed the first time, these settings stick.
BTC
Hi i just unlocked my titan, I am a sprint carrier and i flashed 2.40 on my cell. I before had windows 6.1. I just put the titan reloaded 1.3.4 rom on and now i dont have data services and nor can i get the gps to work can some one help me please
seanpage624 said:
Hi i just unlocked my titan, I am a sprint carrier and i flashed 2.40 on my cell. I before had windows 6.1. I just put the titan reloaded 1.3.4 rom on and now i dont have data services and nor can i get the gps to work can some one help me please
Click to expand...
Click to collapse
Search for DCD's carrier specific Data.cab . Load that and you should be in business.
Tyler
I installed that on my phone and is there something else im suppose to do because the internet is still not working
seanpage624 said:
I installed that on my phone and is there something else im suppose to do because the internet is still not working
Click to expand...
Click to collapse
Go into your connections folder. Settings-Connections-Connections.
Click Manage Existing Connections.
Then if you have Data Network there, click edit.
Name doesn't matter. Number should be #777. Username should be [email protected]. Pass should be vzw.
Click finish. Hold over the connection and hit connect. See what happens. If it says you have the wrong password try programming your phone via *228. Try option 1 or 2.
Tell me what happens.
Tyler
Verizon or sprint
Is this settings for verizon or sprint?
Haha. Good catch. I forgot you were on Sprint. Sorry, I don't know the correct settings for sprint. But you could still look in the connections section and see if everything that should be filled in, is.
Tyler
iota
i got this screen iota and gave me a 1012 error code and then a screen poped up about puttin a user name password and domain
seanpage624 said:
i got this screen iota and gave me a 1012 error code and then a screen poped up about puttin a user name password and domain
Click to expand...
Click to collapse
Yeah, like I said, I don't know sprints settings. Hopefully someone on sprint will chime in for you.
Tyler
Help
Ya i hope someone does Help anyone who can solve this problem
On the reload 1.3.4 under documents is scott rom pack and after installing it . You can install carrier under documents\scott rom pack\carriers.
All I have ever had to do is install carrier cab and open url. Running iota under phone services after install of carrier cab works also.
Maybe a bad flash?? Have you tried hard reset and reinstall carrier cab?
If you know your [email protected] then you don't have to install carrier cab. You can add connection #777 with user name and password that was set up on your original contract with sprint. Maybe you can call sprint for that, I don't know I never have had to.
Did you change anything under ##778# ?
Thanks alot matt
Also i noticed you had a different radio rom then me and i was wondering if thats better then 3.42.02 and also why is it that you have two roms one that
that reloaded beta and the 1.3.4 one
seanpage624 said:
Also i noticed you had a different radio rom then me and i was wondering if thats better then 3.42.02 and also why is it that you have two roms one that
that reloaded beta and the 1.3.4 one
Click to expand...
Click to collapse
I have the newest radio version available. Really have not noticed too much difference. I would upgrade though.
I have two roms listed because I can hit the camera button and switch between roms. LOL not really I have two phones.
Oh haha but i just ran into a problem iota works and allows me to use data services, but then if i just leave my phone alone for awhile my data services wont work and i have to run iota again