Killed my phone ? - HTC Startrek

Ok, thats what i have done: Tried to use the newest Windows Mobile 6.1 rom (WM6.1 Build 5.2.19202 AKU 1.0.0 by pArtizAn ) .. it all went fine till about 25% of the updater tool - result: communication error. I then tried to boot my phone in recovery mode (2 button press + usb insert). From now on every update of every rom i have tried yet (almost all wm6 roms) stop at about 5% with the same error message: Rom is damaged. I have successfully flashed many roms before - but now it wont work anymore. Have i killed my qtek 8500 `?

tabaz said:
Ok, thats what i have done: Tried to use the newest Windows Mobile 6.1 rom (WM6.1 Build 5.2.19202 AKU 1.0.0 by pArtizAn ) .. it all went fine till about 25% of the updater tool - result: communication error. I then tried to boot my phone in recovery mode (2 button press + usb insert). From now on every update of every rom i have tried yet (almost all wm6 roms) stop at about 5% with the same error message: Rom is damaged. I have successfully flashed many roms before - but now it wont work anymore. Have i killed my qtek 8500 `?
Click to expand...
Click to collapse
Install a stock ROM which you can start without the SPL thingy

tabaz said:
Ok, thats what i have done: Tried to use the newest Windows Mobile 6.1 rom (WM6.1 Build 5.2.19202 AKU 1.0.0 by pArtizAn ) .. it all went fine till about 25% of the updater tool - result: communication error. I then tried to boot my phone in recovery mode (2 button press + usb insert). From now on every update of every rom i have tried yet (almost all wm6 roms) stop at about 5% with the same error message: Rom is damaged. I have successfully flashed many roms before - but now it wont work anymore. Have i killed my qtek 8500 `?
Click to expand...
Click to collapse
I had the same problem on my friends phone (I have flasshed mine a dozen times) when getting into the tri-colour screen it shows version 3.06 I have seen another post on here who also had this version and could not get any rom to load. I have tried the stock roms and these also do not work the PC just doesnt see the phone when in tri-colour screen.

Related

Calling all users who had windows boot screen freeze issue!

Calling all users who had windows boot screen freeze bug!
I personally am getting this bug. It's preventing me from using PDAViet's rom which I love. I need to know the following to help track down the cause:
0) What version of ROM were you using?
1) Applications installed when it happened
2) Radio ROM version (2.19.21, 2.47.21, etc...)
3) Device model (dopod 818, imate etc...)
4) Device version (G3 or G4)
5) How long it was since last hard reset (1 day,6 hours, etc..)
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
8) any other significant info you think will help:
9) Do you have the HTC Homeplug today plugin enabled?
10) have you populated your PIM apps via pimbackup or via activesync?
11) Do you have the "HTC_default" today theme enabled?
Edit3: Another possible cause is the "htc_default" black theme. Please report if you had this theme enabled when the boot freeze is encountered. Added question 11.
Edit2: Tracked down a very possible cause for this bug/issue. the new 6 button HTC Homeplug (today screen plugin) seems to be the problem. After disabling the homeplug, users have reported no more boot screen freezes. Read this thread for more information
Edit: Added question 9 & 10
If you've posted, please edit your post to answer new questions. THANKS!!!
0) What version of ROM were you using?
- started happening with PDAViet 40005a Cross
- reproduced on PDAViet 40006 Touch
- As far as I tried, never happened with PDAViet 40005 cross (first edition)
1) Applications installed when it happened
- Resco Explorer
- HTC Phone Pad
- Calligrapher
- Memmaid
- Batterystatus
2) Radio ROM version (2.19.21, 2.47.21, etc...)
- tried v2.19.21, 2.47.21, 2.61.21, and 2.69.21
3) Device model (dopod 818, imate etc...)
Dopod 818pro
4) Device version (G3 or G4)
G3
5) How long it was since last hard reset (1 day,6 hours, etc..)
- sometimes a few days,
- sometimes within a few hours of flashing
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
- 5-10
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
- 5-10
8) any other significant info you think will help:
- Someone mentioned it could be related to the IE temp files/cache being set to storage card. But I don't think so because PDAViet had IE temp directories on storage card earlier than 40005cross.
9) Do you have the HTC Homeplug today plugin enabled?
- Yes, HTC homeplug was enabled
10) have you populated your PIM apps via pimbackup or via activesync?
- I think *most* (but not all) crashes occured after i activesynced with outlook
0) What version of ROM were you using?
- I got it with PDAViet 40005a Cross
- still have it with PDAViet 40006 Touch
1) Applications installed when it happened
- Resco file explorer V6.00
- Resco photo viewer pro V6.31
- SPB Backup V1.6.1
- Flexwallet rev5 build570
- Tube 2
- Igo 2006 plus
- HiCalc V1.8
- HButton V1.8.1
- Slide2Unlock V1.184
- HappyTappingKeyboard
- BatteryStatus V1.04.203 beta
2) Radio ROM version (2.19.21, 2.47.21, etc...)
- 2.47.21
3) Device model (dopod 818, imate etc...)
- Qtek S200
4) Device version (G3 or G4)
- G3
5) How long it was since last hard reset (1 day,6 hours, etc..)
- 12 hours
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
- 1-5
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
- 0
8) any other significant info you think will help:
- I noticed that when I do a backup by SPB backup, I got the following error log :
unable to read from \Windows\History.IE5\index.dat
unable to read from \Windows\Cookies\index.dat
unable to read from \Windows\Temporary InternetFiles\Content.IE5\index.dat
In fact these files are moved to the SD directly by the PDAViet rom.
But after moving back these path on the device (by SkTools), the error log is not there anymore, but the freeze can happen anyway.
So it may be caused from something else.
PS : on earlier versions than the 4.0.0.5a cross, there wasn't any error log with SPB backup.
9) Do you have the HTC Homeplug today plugin enabled?
- Yes
10) have you populated your PIM apps via pimbackup or via activesync?
- via pimbackup
ok I had freze one in one of my beta roms and at that time I was using the WiFiInit.exe from PDAVIET and I also found that when I was using their WiFiInit in startup folder the phone would stop at welcomehead.96.png screen with battery and wifi lights blinking so that might be the problem ? I'm now using an other WiFiInit.exe for my rom
The freeze I'm getting does not have LED's blinking. but the question about the Wifiinit is very interesting.
Can someone (maybe Cloudyfa???) confirm whether or not wifiinit changed from PDAViet 40005 to PDAViet 40005a + higher?
The WiFiInit.exe on 40006 Touch is 7120 bytes.
0) What version of ROM were you using?
- PDAViet 40006 Touch
1) Applications installed when it happened
- Batterystatus
- SPBBackup
- Isilo
- Monster Chinese
- PocketZenPhone
2) Radio ROM version (2.19.21, 2.47.21, etc...)
- 2.69.21
3) Device model (dopod 818, imate etc...)
Dopod 818pro
4) Device version (G3 or G4)
G3
5) How long it was since last hard reset (1 day,6 hours, etc..)
- sometimes a few days,
- seems can be reproduce on one copy I backup using SPBbackup, after I restore it, install an apps (mapking), it'll die
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
- 10 -15
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
- 0
8) any other significant info you think will help:
0) What version of ROM were you using?
- PDAViet 40006 Touch
1) Applications installed when it happened
- HTC Phone Pad
- SPBBackup
- SPBGprs Monitor
2) Radio ROM version (2.19.21, 2.47.21, etc...)
- 2.69.21
3) Device model (dopod 818, imate etc...)
Dopod 818pro
4) Device version (G3 or G4)
G3
5) How long it was since last hard reset (1 day,6 hours, etc..)
- usually every 1-2 days but sometime two times a day
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
- 10 -15
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
- 2
8) any other significant info you think will help:
GOOD NEWS!!!! or actually maybe bad new...
I think i am able to reproduce the boot screen freeze!!!
I have 40006 installed and have softreset and powered down 10+ times. Installed random apps, and reset with wifi/bt/vibrate on and off, and nothign works.
*finally* I decide to sync the phone to my outlook. It syncs up, no probs,
I unplug the USB cable, and hit the reset button again (wifi, bt, and vibrate were still on) and BAM. i'm stuck on the windows mobile screen again.
So perhaps there is an issue with the memory. my outlook calendar isn't that big and neither is my contact list. Maybe something critical in the ROM is getting overwritten?
going to try again now
Hi,
Actually I have this problem several times (>5), but everytime involves an activesync at the very begining with synchronize to my outlook. My outlook do have around 200 contacts, but after the synchronization, not each time i got this problem immediately, sometimes, after sync for so many times, install so many apps, and one time, after a reboot, just stucked...
It happened to me once and I then attributed it to installing sipchange. This was very shortly after installing 4.0.0.6.touch.
After that I flashed my phone again, first with NVID and then with 4.0.0.6.touch and it hasn't happened yet.
radio 2.47.21 on a Qtek S200 G3
I've only got HTC Dark Phone Pad, PocketCM and PHM regedit installed.
I do not sync with outlook, but I do use DirectPush. If I connect to my pc, I use Bluetooth, not the USB cable.
Only problem I have so far is that I can't dump the memory contents to an SD card Something about not having enough permissions
edit: I've got the homeplug active.
3 times happened when soft reset after charging my handset(818pro) to 100% power by PC USB port.
It may be caused by long time USB connection with PC.
I suspected the USB charging as well, but I've soft reset with the USb plugged in, reset after shortly pulling the usb plug out, reset after syncing, reset after unplugging and syncing...
It's very hard to reproduce.. The most reliable way to reproduce the freeze is to pull the USB cable out, wait a few seconds, (the orange charge light should still be on), and then after 4-5 seconds, press the softreset.
It's not 100% but that's how i got it to freeze the last two times... maybe I'm wrong.. i dunno..
So i still haven't been able to reproduce the problem reliably. I chatted with Cloudyfa and he said the main difference between PDAViet 40005 and PDAViet 40005a (when this problem started happening), was the addition of the HTC homeplug from kaiser.
I've disabled the homeplug for now and will try very hard to reproduce the problem again. Usually i'll happen within a day with all my reseting and playing around. So far, 4-5 hours in, it hasn't crashed on reset.
For those that have experienced the reset issue... did you have the homeplug enabled?
Thanks,
Please try charging handset to 100% power by PC USB port and reset again.
BTW, I enabled HTC homeplug.
Yes I had the homeplug enabled each time it happened.
And just for information, I switched to the Gullum V5 yesterday for testing, and I just got this issue with this rom two...
So three leads can be followed :
- it's due by a 3rd party software I installed
- two roms use the same thing that makes this happened
- two bugs are differents but got the same effect
gaijing said:
Yes I had the homeplug enabled each time it happened.
And just for information, I switched to the Gullum V5 yesterday for testing, and I just got this issue with this rom two...
So three leads can be followed :
- it's due by a 3rd party software I installed
- two roms use the same thing that makes this happened
- two bugs are differents but got the same effect
Click to expand...
Click to collapse
Hi actually I tried the Gullum V5 yesterday too. After just install it, hard reset, ext rom installation, looks ok, once I install the chinese plug in (Monster Chinese), which I do install in the 4.0.0.0.6 Touch without problem, once after the installation and required softreset, it hangs in the boot screen. I tried twice and getting the same result.
chunkwok said:
Hi actually I tried the Gullum V5 yesterday too. After just install it, hard reset, ext rom installation, looks ok, once I install the chinese plug in (Monster Chinese), which I do install in the 4.0.0.0.6 Touch without problem, once after the installation and required softreset, it hangs in the boot screen. I tried twice and getting the same result.
Click to expand...
Click to collapse
Did you also have the HTC Homeplug enabled too?
Update on my testing. almost 24 hours with homeplug disabled and lots of softresets. No boot screen freezes yet... crossing my fingers this weekend!
I switched back to PV 4006 touch and I gonna try to use it my way with the Homeplug disabled.
I'll let you know if it fixes our problem or not.
taken from Prophet Touch V5 thread
GR1337 said:
Today I flashed with V5 4mb pool.
I didn't install anything.
I restored my pimbackup. Then soft reset and my device freeze in welcome screen which says Prophet Touch gullum.
I hard reset it.
I restored again my pimbackup, soft reset and again the same problem.
It freezes in welcome screen. :/
Click to expand...
Click to collapse
So can anyone confirm that they did a pimbackup before frezz ?
this might be the problem

Charmer stuck in boot process

Hi,
i tried to flash my Charmer with "TouchFLO Charmer WM6_GER ver. 2.7 BETA by mschmitz". After reboot it stucks on the bootscreen. i tried to flash the original t-mobile firmware via bootloader but it can't solve the problem - same ****... i tried different firmwares - german and english - but no one works :/
Any idea? please help me -.-
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Keep smilin
kiffw said:
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Click to expand...
Click to collapse
Give it to me - I'll take it ;-)
I had the same problem and got it working again this way:
1. Download AKU 3.3 from here:
http://www.t-mobile.de/business/downloads/start/?area=34&handy=291&product=27000592
(you may use WWE too i think)
2. put your phone in bootloader mode:
turn off - press&hold camera + turn on (you should see an rgb screen)
you can also press&hold camera and hit reset
3. Run RUU_compactII.... (downloaded before). It will not show a current version number, thats OK.
4. after the downgrade: hard-reset by holding camera+record and reset, then green button. I don't know if this is necessary - but i did it this way)
Now you have a running phone.
I tried to upgrade to beta 2.7 again. First there was an error message in the log - I had to kill the activesync process (wcescomm.exe) and restart it.
Now I have beta 2.7 up and running!
cu

Problem flashing

I have flashed my device many times, and I am trying to test out no2chem's rom. I currently have flashed dcd's 6.1 rom, and whenever I run the RUU, as soon as my ppc hits the boot screen it says USB and then I get a message on my windows xp machine that the device is not recognized. Then it disconnects and I am stuck. Anyone experience this? I have rebooted, etc...many times.

wm6 rom problem help needed

Hi guys i need some help
i have the hermes 200
ive flashed to wm6 with schapps 4.31, everything was peachy until i soft reseted, after the device finished loading (loaded ok) once it was powered off , it wouldnt power on again. i had to restart several times until i could get it to work properly. this probled repeated itself every time i soft reseted.
i thought the problem was with the rom so i flashed to CRC 11.2 stable version and got the exect same problem.
any ideas

[Q] Wjfi & Bluetooth not working

Bought a T mobile HD2 (unlocked) second hand with energy rom installed.
Got it home & I find that the wifi & bluetooth are not working.
It picks up the network signal fine & the data connection is working fine.
But the wifi turns on & will not pick up anything.
The bluetooth it seems does not discover & is not discoverable.
I suspected it may be somthing to do with the rom so I loaded up a stock T mobile rom with the same results.
I have updated the radio with the same results.
The phone has Hspl loaded & I am wondering if I could do a complete cleanout of everything including Hspl & reload a completly vanilla stock Rom would that help.
I have fiddled with all the settings for both wifi & bluetooth & still no results.
At this point I need help!!!!
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
johnerz said:
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
Click to expand...
Click to collapse
I've the same problem ...I suppose.
I used a Touch Pro in the last two years and Energy ROMs since September 2009. I never had problems with Wi-Fi an Bluetooth.
Recently I bought a HD2 and tried Bloutooth and Wi-Fi only after 1 week.
So, both the Touch Pro and the HD2 got the same ROM (Energy ROM) flashed , each by its own version, but two days ago I discovered WiFi not working (DISCOVERED, because I never tried it before)
The problem seems an extremely poor signal seen on the on screen meter, only if I'm close to the router (1-2 meters!) I couldn't establish a real connection, because the HD2 loss the signal every 30-40 seconds.
Bothered about this I tried with Touch Pro: the result is the same!
So I concluded: "It's the ROM!". Strange (never had problems with Energy ROMs) but possible. I flashed the stock ROM on the HD2: the issue remains. So I thought about the RADIO, and I flashed the RADIO 2.12.50.02 (compatible with ROM). The issue is still here.
I used Task 29 before another flash, then I tried an Artemis ROM with RADIO 2.12.50.02... nothing changed. (note that I tried almost every different settings about Wi-Fi,from BsB tostandard enhance settings)
Last (related?) issue: when I try a hard reset, the progress bar starts to "move" but after 3-4 seconds (about a third of the bar) the bar disappears and I got the "Press VolUp button" message. Then the phone has the first boot... but I wonder if the HR is complete, because it seems yes.
Finally I came to this thread and... another doubt: what about BT?
I tried both the Touch Pro and the HD2 Bluetooths but they can't connect or recognize each other (every "Find" and "Visible" options activated)
I didn't try yet with Touch Pro (flash etc.) but I am very bothered and dubious about it.
Cooked ROM Energy Leo 1 Aug
OS version 5.2.23673
Radio 2.12.50.02
Operatore: H3G ITA
For every other info needed to give help... ask!
THANKS FOR HELP or TIPS
WIFI & Bluetooth
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
flinx said:
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
Click to expand...
Click to collapse
Sorry I can't help about this.
We are alone in this thread!
wifi & bluetooth
I think your right.
Ah well, at least I have a very expensive doorstop!
You are not alone. I am experiencing the exact same problem and have yet to find an answer.
Task 29 didn't help and reflashing the radio the traditional way (even with the stock rom) doesn't seem to overwrite whatever is causing this problem.
Would uninstalling the hspl do anything? I am running out of ideas.

Categories

Resources