Hi,
i tried to flash my Charmer with "TouchFLO Charmer WM6_GER ver. 2.7 BETA by mschmitz". After reboot it stucks on the bootscreen. i tried to flash the original t-mobile firmware via bootloader but it can't solve the problem - same ****... i tried different firmwares - german and english - but no one works :/
Any idea? please help me -.-
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Keep smilin
kiffw said:
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Click to expand...
Click to collapse
Give it to me - I'll take it ;-)
I had the same problem and got it working again this way:
1. Download AKU 3.3 from here:
http://www.t-mobile.de/business/downloads/start/?area=34&handy=291&product=27000592
(you may use WWE too i think)
2. put your phone in bootloader mode:
turn off - press&hold camera + turn on (you should see an rgb screen)
you can also press&hold camera and hit reset
3. Run RUU_compactII.... (downloaded before). It will not show a current version number, thats OK.
4. after the downgrade: hard-reset by holding camera+record and reset, then green button. I don't know if this is necessary - but i did it this way)
Now you have a running phone.
I tried to upgrade to beta 2.7 again. First there was an error message in the log - I had to kill the activesync process (wcescomm.exe) and restart it.
Now I have beta 2.7 up and running!
cu
Related
I keep getting the NO SERVICE in the phone balloon, if i put my simcard in a different phone it works like it shuld.
any1 having same probs? and a solution
Yes! Try to Hard Reset. It worked for me.
click on the green phone9send0 button 8)
i tried hard reset but even putting it in bootmode and then hard reset but it dident reset it was back to its last state (so all the prog's i installed where still there) so that was a bit strange
even when i entered the PIN it gave the NO SERVICE err. i tried everyting. all buttons
any other solutions?
thx !
Hard resetting 2005 is different from 2003
press power + camera + record + small hole at the bottom all at once.
you get KIT, registry hive, storage prompts when you do that. Now release all these buttons and boot.
my solution
I had this problem, I solved it by downgrading my radio rom to version 1.08.
Had the same problem in radio 1.18, downgraded to 1.17, works fine now.
any other solutions?
Click to expand...
Click to collapse
How about going back to diamondROM :twisted:
Ok, thats what i have done: Tried to use the newest Windows Mobile 6.1 rom (WM6.1 Build 5.2.19202 AKU 1.0.0 by pArtizAn ) .. it all went fine till about 25% of the updater tool - result: communication error. I then tried to boot my phone in recovery mode (2 button press + usb insert). From now on every update of every rom i have tried yet (almost all wm6 roms) stop at about 5% with the same error message: Rom is damaged. I have successfully flashed many roms before - but now it wont work anymore. Have i killed my qtek 8500 `?
tabaz said:
Ok, thats what i have done: Tried to use the newest Windows Mobile 6.1 rom (WM6.1 Build 5.2.19202 AKU 1.0.0 by pArtizAn ) .. it all went fine till about 25% of the updater tool - result: communication error. I then tried to boot my phone in recovery mode (2 button press + usb insert). From now on every update of every rom i have tried yet (almost all wm6 roms) stop at about 5% with the same error message: Rom is damaged. I have successfully flashed many roms before - but now it wont work anymore. Have i killed my qtek 8500 `?
Click to expand...
Click to collapse
Install a stock ROM which you can start without the SPL thingy
tabaz said:
Ok, thats what i have done: Tried to use the newest Windows Mobile 6.1 rom (WM6.1 Build 5.2.19202 AKU 1.0.0 by pArtizAn ) .. it all went fine till about 25% of the updater tool - result: communication error. I then tried to boot my phone in recovery mode (2 button press + usb insert). From now on every update of every rom i have tried yet (almost all wm6 roms) stop at about 5% with the same error message: Rom is damaged. I have successfully flashed many roms before - but now it wont work anymore. Have i killed my qtek 8500 `?
Click to expand...
Click to collapse
I had the same problem on my friends phone (I have flasshed mine a dozen times) when getting into the tri-colour screen it shows version 3.06 I have seen another post on here who also had this version and could not get any rom to load. I have tried the stock roms and these also do not work the PC just doesnt see the phone when in tri-colour screen.
Sorry for my english!
yesterday after flashing an dreturned original rom tim italian v.RUU_Nike_TIM_IT_1.31.408.09.
the device is starting without problem and installing operator setting.
in 2nd restart i setup any program (tom tom 7, tcmpc, opera mobile 9, spb time.) the divece is ok, after stand by i push the power button the phone display is off, the line's led is green.
we can help me?
or i call yhe support htc?
Mark the checkbox 'Advanced Network Connectivity' in USBtoPC somewhere in Start -> Options. I have the same Problem with another ROM.
If i uncheck the box my Device won't wake up from StandBy when Power Button is pressed.
But now i have always to uncheck the named option before sync with PC (ActiveSync). Waiting for solution.
Regard
the green led does it burn every time, you switch on? you cant switch off again?
connect it to your pc!
if your computer find a new device ... pleas try this drivers ... http://www.4shared.com/file/37767906/f3f2d803/MotoQ_QPST_Drivers.html
if you have in your hardware manager new "com" connection like "Qualcomm NMEA Diagport" your device is in the oemsbl!
If yes ... i tell you a way to reboot your phone!
hallo netrunner at tanks for your help.
when the device have the problem off shout down, activesync don't see.
tomorrow i haven't problem, the device is blocked at 1.00 pm, i have a soft reset in any time, the problem is off self only and in this moment it worked well
yesterday i flash with rom tim and radio rom 1.58.21.23.
the radio rom could he give the problem?
when start the problem today the device is in hsdpa
i powered off hsdpa the problem is cotinued
before i flash the 2 rom the device work very well.
does thing recommend me?
Ok all ok !!!!!!!!!!
1) I reflash the rom original tim
2) I flash the radio rom 1.58.16.27 (what there was already when I have bought in to device) with hard reset is OK!!!!!!!!!!! :
Tanks for all!!!!!!!!
your radio rom is crashed ... some times you can have this error! ^_^
Hi,
This is my problem, I have a X7501 running Windows Mobile 6.5 Cooked by MichyPrima. The current Rom I have is this; "Athena_SPL1.2_R1_CE_B21500_MiChY"
The problem with this version is that every time I do a soft reset, all or more of the programs that I installed get deleted and I have to reinstalled them again.
So, I decided to upgrade my pda to this version
"Athena_SPL3.5_R1_CE_B21500_MiChY"
In order to this I just simple need to flash the above file in my x7501 and here is when the problem starts,
I run the "RaphaelCustomRUU" that comes with the rom, I follow all the prompts and when the instalation start (0%) the pda auto-restart, the connection get lost and the installer simple stops.
I tried to install another version "28205_1_04RVGA" but happens exactly the same, I tried to update my Radio, and the same.
It looks like something is making my Pda to restart and doesn't allow the installation to continue. I also follow the steps from 1 to 10 of this file "AP4_How_To_1.8" to try to fix any problems with my device and nothing.
Battery is 100%
antivirus is off
PDA Sync perfectly
PDA works properly except when soft reset
Does any one has any idea why the auto restart is happening???
Thanks in advance
sovius
Hi I also have a similar problem:
I was running SPL3.5 & AP4 on an Athena X7500 previously but making a hash of the new/old roms to install, i flashed AP Touch by PK.
I am now unable to get into windows mobile's Today screen as the customisation process which runs config & AP Touch.tsk keeps resetting the device. Each attempt i flash (i tried multiple ROMs, ranging from AP Touch again, AP3newSPL, and AP4.0 again) results in an error asking me to check my USB connection to the device. I suspect its because i do not have enablerapi anymore inside the device. I am unable to install enablerapi into the device since it keeps resetting! deleting files from the startup folder to try stopping the customisation / reset process also didn't quite work, neither does it allow me to delete the AP Touch.tsk file inside the device.
Can anyone help??
Well, after a lot of research and luck I have finally resolved my problem.
and here is how I did it.
As you know my device every time I try to flash it from the computer, didn't response and simple cut the connection. I tried to flash it from the SD card and nothing, so.
1) look for the rom you want to flash, in my case was "Athena_SPL3.5_R1_CE_B21500_MiChY". Note; you can go from SPL 1.2 to 3.5 but for some reason I couldn't go from 3.5 to 1.2 or earliest.
2) I put my Athena in bootloader mode, by pressing camera + Comm Manager + reset
3) the colored screen appears saying on the white area (serial). why, I'm assuming my device was waiting for a serial connection or something
4) and here is the luck, I connect my USB cable to my device and the word serial changed to USB.
5) I activated the RaphaelCustomRUU.exe with the "Athena_SPL3.5_R1_CE_B21500_MiChY" rom inside and follow the prompts
6) the installation for the first time in more than 6 months finally start and satisfactorily was completed as well.
done
I'm checking if everything is okay, but so far, everything cool,
Hope this is helpful to those who face the same problem.
cheers
Sovius
Hi ,sorry noone saw your post but it would have been obvious what your problem was.
There is a way to downgrade to SPL 1.2 and it is in the stickies.
Just for reference if anyone finds this thread, you should have gone into bootloader to check your SPL and then made sure your ROM matched this.
The mismatch was the problem that caused the endless reboot.
regards lakeman
Thanks for your replay.
but I'd like to mention, that I was not trying to downgrade my SPL, in fact I was trying to Upgrade from 1.2 to 3.5. But that is not the issue.
My problem was that no matter what installer I used, after follow all prompts, the installation process freezed at 0%. Everytime I connected my PDA, everything looks alright until the installation process started and nothing always 0%.
So the solution was to put my PDA in bootload mode and only when the coloured screen appears, only at this point I connect my USB and double click the RaphaelCustomRUU.exe with the desired OS. My PDA instantly recognized the connection and did the installation.
Cheers
Hello,
I want to give my phone to my friend... ive done factory reset from settings but during this my friend just pull off battery and put his own SIM to phone.
After this phone booted and its seems that everything is ok but... back / windows / search buttons are not working. I feeling that vibration is working but nothing happen.
I want to reset phone but RUU is not working - error 205 (Zune is still showing error - "you need finish your installation - disconnect your phone and finish settings).
How to reset phone ? I'm confused.
SPL - 4.6.175006.2 (140733)
eMMC SMS 15028MB, F : PA32
Radio 17.5006.08.27
I have new rom Dynamics_2.2_Titan406_Eastern downloaded already. How to apply it to my phone ?
Already I can go through RUU - I can use flash but nothing happen. Upload is still on 0% and after 5-6 minutes RUU showing an error 262
keyjey said:
SPL - 4.6.175006.2 (140733)...
...I have new rom Dynamics_2.2_Titan406_Eastern downloaded already. How to apply it to my phone ?...
Click to expand...
Click to collapse
First of all - if you wanna have custom rom on your Titan - install HSPL.