Hello,
I want to give my phone to my friend... ive done factory reset from settings but during this my friend just pull off battery and put his own SIM to phone.
After this phone booted and its seems that everything is ok but... back / windows / search buttons are not working. I feeling that vibration is working but nothing happen.
I want to reset phone but RUU is not working - error 205 (Zune is still showing error - "you need finish your installation - disconnect your phone and finish settings).
How to reset phone ? I'm confused.
SPL - 4.6.175006.2 (140733)
eMMC SMS 15028MB, F : PA32
Radio 17.5006.08.27
I have new rom Dynamics_2.2_Titan406_Eastern downloaded already. How to apply it to my phone ?
Already I can go through RUU - I can use flash but nothing happen. Upload is still on 0% and after 5-6 minutes RUU showing an error 262
keyjey said:
SPL - 4.6.175006.2 (140733)...
...I have new rom Dynamics_2.2_Titan406_Eastern downloaded already. How to apply it to my phone ?...
Click to expand...
Click to collapse
First of all - if you wanna have custom rom on your Titan - install HSPL.
Related
Hi,
i tried to flash my Charmer with "TouchFLO Charmer WM6_GER ver. 2.7 BETA by mschmitz". After reboot it stucks on the bootscreen. i tried to flash the original t-mobile firmware via bootloader but it can't solve the problem - same ****... i tried different firmwares - german and english - but no one works :/
Any idea? please help me -.-
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Keep smilin
kiffw said:
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Click to expand...
Click to collapse
Give it to me - I'll take it ;-)
I had the same problem and got it working again this way:
1. Download AKU 3.3 from here:
http://www.t-mobile.de/business/downloads/start/?area=34&handy=291&product=27000592
(you may use WWE too i think)
2. put your phone in bootloader mode:
turn off - press&hold camera + turn on (you should see an rgb screen)
you can also press&hold camera and hit reset
3. Run RUU_compactII.... (downloaded before). It will not show a current version number, thats OK.
4. after the downgrade: hard-reset by holding camera+record and reset, then green button. I don't know if this is necessary - but i did it this way)
Now you have a running phone.
I tried to upgrade to beta 2.7 again. First there was an error message in the log - I had to kill the activesync process (wcescomm.exe) and restart it.
Now I have beta 2.7 up and running!
cu
(moved from titan forum)
This phone will not boot anymore at all and I need to return it for a replacement. I am just trying to get it back to factory default for Sprint.
It has SPL-2.47No2chem bootloader and I can't run the TitanRelocker because the phone will not boot.
I just tried putting it into tri-color screen and running TitanRelocker.exe through usb
result: No device connected - would you like to try copying again
Tried extracting TitanRelocker.exe and running ROMUpdateUtility.exe through usb
result: status bar updates on PC and phone, phone restarts into tri-color and still shows SPL-2.47No2chem
Tried copying StockSPL_1.06_RUU_signed.nbh onto sd card
result: status bar updates on phone, Update success. When I restart the phone it shows Nuekernal-3.01, launches into RM splash and hangs. Going into tri-color still shows SPL-2.47No2chem
Tried to load nueROM_MTitan-201-201-spackr through usb
result: Update success. When I restart the phone it shows Nuekernal-3.01, launches RM splash, then nueROM 3 screen appears and hangs at 44519ms, 60679ms (sysintr_bt_disable) or various ms
I have tried to get this phone working in so many ways I'm beginning to think it has a hardware problem. I have tried so many hard resets, various radios (currently 3.42.50) and roms and read so many posts I'm getting brain lock.
More troubleshooting while waiting:
Tried some steps suggested by Ryan Mogul in another thread
# Flash the Stock Sprint ROM from my Unlock Tools Directory and let it run its Auto Cust.
(I had to use the SD card method for this because of 'Image error. Please check image" using the RUU method.)
# Do NOT interrupt it let it finish and reboot,
* (must reset manually using the SD card method) and everything. It will replace your current EXT ROM with contents that never harm anyone. (never happened - wouldn't boot)
* Used SD card to install Special_4350.nbh - still wouldn't boot, now black screen only - multiple resets - error: 'No Radio'
* Used SD Card to install radio - which one? wiki says Radio 1.40.00
* CDMA updated - soft reset - won't boot - 3 resets - radio now 1.40 - hangs at htc screen
* trying tri-color usb RUU update to stock ROM 3.35 - Still have SPL-2.47no2chem - 'Image error. Please check image" again
* trying SD card method for stock 3.35 ROM - 'No Radio' error - wait... booting... hang at Windows Mobile screen 2 minutes... 'tap screen' appears... customizing running PPST, IOTA etc (replacing EXT ROM?)... resetting... booting... press Start... hang - lockup
* Reset - radio now 3.35.04 - hang at Windows 3 minutes - lockup
* Remove battery 30 seconds - replace battery - push power - Win Mobile screen - startup sound... hang 3 minutes - lockup
* try a hard reset - why? I have no idea - hang at win screen - no sound - lockup
Don't know what to do next. I still have SPL-2.47no2chem and no way to remove it. I really don't want to take it back to Sprint this way.
Sprint
SPL-2.47No2chem build 109
Radio now 3.35.04
ROM RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship
Can anyone point out what I am doing wrong? Have I posted enough info?
Any help at all would really be appreciated.
Thanks!!!
- Andy
So what happens when you turn the phone on currently.
It was booting and running for random periods of time before locking up. I was able to keep it running long enough to run nueSPLTitanRelocker-100-2.07-pack. Now it boots to a black screen but at least it has SPL-2.07.0000. Wow - what a week!
Not sure what to do now - I guess just take it back to the store.
The phone wouldn't even finish a hard reset at the store. Ther're sending me another phone. Must be bad memory or something. At least posting everything I did here helped me straighten out what the heck was happening. Thanks Drew and everyone else who took time to look at this.
Case Closed: Bad Harware
Today i flashed the update over Kies. After finishing this procedure i install superuser again and reboot.
- crappy WLAN (connect / disconnect / cant connect ....)
- Freezetime Sleep (if i lock the phone, the display needs about 5 seconds to turn off)
- Freezetime Wake up (if i unlock the phone, the display turns on, ok, but i cant do anything, i needs to 10 seconds before u can do something)
can anybody help me to get this freeztime fixed ???
So what update ????
Did you try a factory reset ...
Or flash stock rom to suite from stock rom threads .
jje
Reflash stock rom and do a factory reset and then update again.
Casanoaa said:
Reflash stock rom and do a factory reset and then update again.
Click to expand...
Click to collapse
kk i will try this :/ no other chance to use the phone so i have to do this
i flashed via kies the latest update I9300XXBLG8 i guess oO cant move to menu or somewhere else :/
Hi, I have a strange problem with my Xerpia Z2..
After flashing a cyanogen mod to test it out.. it`s not possible for me to get a working generic Android system anymore.
The smartphone stuck in a caint of "bootloop" or, if it start android at last, it reboots after a short while automaticly.
The bootloop is like this:
Screen: Shows 10 sec. sony-logo -> than 2 sec. black screen -> than 5 sec. sony-logo -> than it starts from beginning..
The bootloop-lenght varied until it starts finally into android.. sometime it doesn`t come to that point, and it reboots for a very long period (until I get annoyed and shut it down)
I have trying the following things to solve that issue:
- Flashing several stockroms wirh flashtool (D6503_17.1.2.A.0.314_Generic DE.ftf / D6503_23.0.1.A.0.167_Customized DE.ftf)
- trying to reset the hole phone with the xperia "emma" tool
- trying to reset the hole phone with the pc companion software
.. in my opinion, the problem could be find in the bootloader/recovery.. I don`t think it`s a hardware issue, because cyanogen mod is still runs without problems. Maybe some cyanogen remains are still leftover in the bootloader, that don`t work with generic android versions.. that`s what I can imagine. (but i`m not an expert
I don`t get why flashing the phone doesn`t solve the issue., it almost seems that the flash process don`t touch the bootloader, to overwrite it with stock parameters (?) or does not fix that area which is responsible for that issue..
Phone status at this time:
Not root - not unlocked - no backup of TA - DRM Keys (The guy that I bought that phone from, saddly doesn`t do a backup /
Before you flash the stock rom, are you clearing the Dalvik cache?
Whenever I've been through instructions on flashing roms, that always seems to be a step, but I didn't see you mention doing that before flashing.
Lagamorph said:
Before you flash the stock rom, are you clearing the Dalvik cache?
Whenever I've been through instructions on flashing roms, that always seems to be a step, but I didn't see you mention doing that before flashing.
Click to expand...
Click to collapse
Hi, I did that.. the 3 checkboxes in Flashtool are always enabled (Wipe: Cache, APPLOG. Data)
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...