Two days ago I tried to update my Gene to 6.0. All positions of instruction were done. But when Romupdateutility began installation, it has stopped and show me "error 270: Update error The image file is corrupted. Please check your update utility". What Have I doing for success instalation 6.0? Thank you for help.
Related
Hi All,
first post and a newbie, I tried upgrading my XDA2 with the latest update from O2 (ver1.72). I followed there instructions to the letter but on stage 1 it got to about 39% then stops and comes up with the following error, (Error 112: CE ROM Error). I have tried this countless times and it comes up with the same error. Has anyone had the same problem and how did you come over this. Also if so can you tell me how you did this. thaks in advance for your help.
Hi,
i have a very big problem with my XDA (HTC Prophet).
I already had a WM6.1 Rom on my device but wanted to change to a different rom.
Now my Device is showing me the RGB screen after upgrading. The UpdateUtility works fine and i get "update successful" after the updating.
Now i can just install the original rom from O2 (WM 5).
Does anybody know a solution for my Problem?
Thanks and Greetings
MrDCA
Can you get the device to start up after installing the WM5 ROM?
What you will need to do is follow this to recover it: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
And then HardSPL before flashing a new WM6.1 ROM.
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
mrdca said:
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
Click to expand...
Click to collapse
Would you like to try my tool? (@ my signature~~, hope it works for your situation... )
You're using prophet tools? I think there is a slight issue with that, but I've fixed it and shall upload it now...
I tried both utilities.
none of them works for me.
Let me know if you uploaded the fixed version and i will test it!
Thank you guys!
The fixed version is now uploaded in the Prophet Tools thread. If that fails, you can use the HardSPL utilities from the New WM6 Upgrade guide.
Hello.
I want to change another version rom on HTC Hermes but when start loading new rom the "ERROR [262]: UPDATE ERROR
The rom update utility has encountered communication errors during the update process ... RECOVERY ...."
Phone is correctly connected to USB and entered on bootloader.
ex. Old rom is Schap's and i want to change to RDZ-ROM-STORM (for example) but not works!
When load similar version (Schap's) works!
What could be the problem?
Sorry 4 my eng.
Hello,
I have a big problem. I flashed my HTC Touch Dual (Swisscom XPA Touch Dual with Italian language) with SSPL first. Then I forgot to flash the device with uSPL or HardSPL and a new ROM (official HTC wm6.1 German) was failed in the middle. Now I have the "upgrade rom code error". Flashing the HardSPL or uSPL is imposible now, bcause of the "ERROR [262] : UPDATE ERROR". I can't find the original ROM (swisscom italian) for the device, all other official ROMs brake with the error " ERROR [294]: INVALID VENDOR ID" (because there is no HardSPL / uSPL, right?). I have USB connection in bootloader mode (can go there only, the operator system is lost) but in the device manager there is MICROSOFT USB SYNC and not HTC USB SYNC (can't identificate the device, only as a "Qualcomm..." in "devices and printer (WIN 7 x64). I have done all the steps for "drivers for WIN 7" and tried it on a (virtual) WIN XP with the same results. Is there a way to save the system with mtty (it's too difficult for me) or other processes?
Thank you in advance (and sorry for my english) !!!
P.S.: I looked at google and other threads in this forum, but without results
NIKI100
SPL-1.22.0000
CPLD-1
-Please use the 'Search' function first, and check the manuals already made available for the Niki.
-First read the manuals completely and follow the steps meticulously..!
-Before posting your questions, remember that everything you need to know, to flash your device, is probably already made available for you on the board.
-Take your time to find out what you need to know before you flash your device, or you 'will' brick it..!
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
I have same problem plz help....
[email protected] said:
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
Click to expand...
Click to collapse
I have same problem with my niki plzz help me
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now
i went to this thread
http://forum.xda-developers.com/showthread.php?t=472169
to upgrade my htc p3400i which has a s/n HT 814. I first tried the olipro method but it failed and my device was dead the i tried to unbrick it by using orefkov method as explained in that thread, when i reached this step
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
i get this error of error 200 , invalid update tool of which i am attaching a image . Please help me i am very new
make sure that USB sync is done properly before running RUU...i.e drivers properly installed.