Original HTC Comm Manager - Touch Dual, MDA Touch Plus ROM Development

hey folks,
i installed duttys comm manager and unfortunatelly, i have no clue how to remove it. furthermore i tried to find a .cab with the original comm manager but i had no success
would be nice, if someone could help me....
a hard reset wont be nice !

Related

I-mate Rom

Hello :
How can i upgrade my HTC TyTN with the imate rom ?
I only get 99 % ....everithing works after that ....except mms... that ive notice.
Any ideas ?
Luis
The upgrade stopped because same cabs need a Imate IMEI....
You need to put the extended memory in the card, soft reset when the fist installation stop, an install manually tha cabs yuo need from the card.
I solved also the MMS problem.
I suggest to use fit4cat tweaker to show the TyTn EXT_Rom content. Save the MMS cab on your computer, then Upgrade to I-Mate rom (look at Wiki, http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades )
During I-mate personalizzation the phone will "freeze"... don't worry just soft reset. just config date, time zone, international setting, then install the TyTn mms cab an configure the MMS
TyTN MMS Ext. Rom CAB File
As I was not aware that the iMate MMS CAB was only installed to specific IMEI devices I did not save the TyTN Ext. Rom to my PC before installing the imate JasJam ROM.
Does anyone have a copy of the TyTN MMS CAB file to save me having to re-install the HTC (QTEK) ROm and then save the file and then install the JASJAM Rom?
Thanks
Mike
Re: TyTN MMS Ext. Rom CAB File
all extended roms are here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Thanks for that -
I have seen how to unhide the Extended ROM folder and have succesfully done this, however if I try to delete some of the unwanted CAB files I get a message saying the disk is write protected and if I try to copy the TyTN CAB files to the Extended ROM I get he same message - does anyone know how to 'unlock the Extended ROM?
Thanks
#EDIT#
I have installed the CAB in the Temp folder and run it from there - I know have MMS, I then re-ran the Orange CAB and it installed all the correct MMS Settings. I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
paulesport said:
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
Click to expand...
Click to collapse
no, it will take the same amount of memory.
mike.bradshaw said:
I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
Click to expand...
Click to collapse
Try using fit4cat, il should work..
http://forum.xda-developers.com/viewtopic.php?t=61060&highlight=
BT fixed?
Just curious, does this upgrade fix bluetooth issues, like A2DP skipping?
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
error
Solution to MMS Problem in TyTN->I-Mate Rom Upgrade
1) download from http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms TyTN Extended Rom
2) Unrar the file, copy the file named MT_Shortcut-MMS-Hermes.cab anywere in your TyTN
3) Run in your phone the file MT_Shortcut-MMS-Hermes.cab and MMS will be in your phone again.
4)if isn't the same used for internet, config the MMS access point (APN) in start menu>settings>connections tab, then connections icon, click the tab Advanced, select network, New, add and conf My MMS network (APN, Username, Password)
5) Go to Messaging, MMS and config MMS parameters (gateway....)
6) Try your Internet UMTS-GPRS connection, if your phone try to connect using the MMS connections, tap on settings and restore My ISP connection as default for internet. (Stupid software, it automatically try to use the last network configured...... )
Thkns but already try with the cab from dopod and and htc.
I upgrade again with complete upgrade with rom form htc and is working.
To bad o cant use imate.

Comm Manager with VOIP

Hi
I need install in Athena the comm manager with VOIP facilities, those someone have a file cab with this.
Tks

HTC Task Manager for Atom Life

Hi all,
anybody can tell me which HTC Task Manager version support Atom Life? I already tried 1.5 and 6.0 on WM6 and WM6.1 not compatible and nothing happen after installed. Thank you.
me too...
test already yet.. but not work...
me too
ther's a brandet O2 task menager
typakkk said:
ther's a brandet O2 task menager
Click to expand...
Click to collapse
but O2 task manager no X button close program! Thanks.
Use WkTask instead. I believe its coming with new ROM's. Good luck for it.
Try this: Quick Menu 2.7
Copy the unzipped folder to Programs on your Atom Life, create a shortcut with Total Commander in your Start Menu and try it. Don´t use it from Internal Storage, because it must start with windows.
It includes a cascading start menu and many other useful settings. Of course also a task manger.

Looking for 2 OEM's ... flashlight and dotFred Task Manager

i have found the dotFred Task Manager by colonel dated 10/23/2007. when i tried and run the buildOS it keeps coming up with a "dump/temp/taskmgr.exe" is a directory not a file. or something like that. i think it works in some kitchens but not dcd's.
second is a flashlight OEM. i see it built into some peoples roms but can't find it anywhere.
i have downloaded well over a thousand OEM Packages from here and xda and cant belive it's is not in there somewhere.
can someone hook me up.
if you need to you can email them to me at codyppc at gmail dot com
thanks, cody
attached is the dotFred Task Manager that i found. agian... dont see why i am getting that error.
Flashlight... same thing here on the task manager.
You will have to do a search for the taskmgr.exe in the SYS folder. And delete it!
You will be basically replacing the stock taskmgr.exe with dot fred.

[Q] can't install cab anymore on htc hd2

when i try to install cab from file explorer in htc hd2 it gives the message
"this program is from an unknown publisher.You should intall only if you trust its publisher.Do you want to continue?
when i press "yes" it gives me message that "installation of cab was unsuccessful"
i have enough space on my phone and memory card.
i have tried to download cab a no. of tomes
also this is happening with all cabs eg:fpsce,YAHOOMAIL
PLEASE HELP
I have the same problem! Need assistance!
Guys try installing this .cab to device. Then you should be able to install apps again
Nop, this cab also canot be installed.
Can't install or unninstall anymore..
I have the same problem!
Can't install or unninstall anymore..
Can you install from known publishers or is the probelm with only unkwon publishers?
* THIS * might help
it happens with all CAB's and the problem is not only with install, I also can't unninstall. Omarket, WM Market and XDA Market can't also unninstall..
It's a common application lock problem.
The solution that I always use is quite simple.
1. If you have Regedit installed and working use that one. If not download Mobile Registry Editor. Unpack the files, connect your phone through Activesync and open Mobile Registry Editor, you now should be in the registry of your phone.
2. Go to HKEY_LOCAL_MACHINE\Security\Policies\Policies
3. Change the value of 0000101a from 0 to 1
4. soft reboot
Works for me every time.
didn't worked
I had the same problem, tried everything but issue resolved after hard reset.
Cant install any cab
Im among many that seem to be unable to install any cab after flashing CleanEx ROM 6.5.x (sorry , I cant post there!) but no fix appears to be evident.
Has anyone resolved this?
click on a cab and nothing happens (Im well experienced at flashing, installation etc on an HTC Vogue NFSFAN ROM) but this on HTC [email protected] has me beat!

Categories

Resources