I have tried and downloaded WM6.0 from the official dopod website and I found it to be slower and more complicated to use than the original WM5.0 which came with the system.
Would any of the ROM WM6.0 here be any faster and stable? My prioirty concern is Speed and Stability. Any advice which ROM I should try?
Thank you for any advice.
jlingo said:
I have tried and downloaded WM6.0 from the official dopod website and I found it to be slower and more complicated to use than the original WM5.0 which came with the system.
Would any of the ROM WM6.0 here be any faster and stable? My prioirty concern is Speed and Stability. Any advice which ROM I should try?
Thank you for any advice.
Click to expand...
Click to collapse
Get inline for PK 4.0. You can join the other addicts including myself that are eagerly awaiting the release of this ROM. Untill then I think you will find PK 3.0 to be the best thing since sliced bread for your wonderful PDA.
Uhm where I could download this PK 3.0?
http://athenaproject.logontek.com/AP...Dual 3.0.rar
Is it this one?
I'm having a trouble updating. It kept on going into The Image File is Corrupted ERROR after 1%.
ERROR 270 Update Error
I'm using Windows Vista, WMDC 6.1
jlingo said:
Uhm where I could download this PK 3.0?
http://athenaproject.logontek.com/AP...Dual 3.0.rar
Is it this one?
I'm having a trouble updating. It kept on going into The Image File is Corrupted ERROR after 1%.
ERROR 270 Update Error
I'm using Windows Vista, WMDC 6.1
Click to expand...
Click to collapse
Hi
You should be load the original rom first then unlock your device with Olipro's unlocker then load PK 3 rom. Without unlocking the CID you can't load just any other roms. Find the rom it came with it or the updated rom from HTC.
Olipros unlocker is available here http://forum.xda-developers.com/showthread.php?t=315831
Also read the unlocker thread before you update.
Thanks Great stuff.
I thought the unlocking was only for those who have Athena with Locked SIM card
Anyhow, I have flashed with PK 3.0 successfully.
Ok I am experiencing difficulty pairing syncing by Bluetooth. I already went to the registry to delete
hlkm/software/microsoft/bluetooth/activesync and still the problem not resolved.
Any solution?
Port not Available: Cannot communicate with PC because Port not available. Another program may be using the port.
jlingo said:
Ok I am experiencing difficulty pairing syncing by Bluetooth. I already went to the registry to delete
hlkm/software/microsoft/bluetooth/activesync and still the problem not resolved.
Any solution?
Port not Available: Cannot communicate with PC because Port not available. Another program may be using the port.
Click to expand...
Click to collapse
Hi again
See here how to activesync via bluetooth .(But remember not to use bluetooth for flashing the roms)
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Also remember to disconnect after your needs, otherwise your battery will be drined quickly.
Good luck
hi I have tried but the problem still persists. I still kept on getting the same error.
Now it works, I just hard-reset. the most painful way.
------------
Related
Hi Guys
I have just noticed that there is new ROM published on www.clubimate.com today.
As far as i understand it is the same OS version as installed on all JASJAMs sold by Telstra, but just with new radio and maybe new extROM ?
What i dont understand is why it says 1.38.30.10 instead of 1.38.00.10 ?
Maybe some additional customizations for their NextG network ?
Here is the link:
ftp://ftp.clubimate.com/i-mate_JASJAM_telstra_1.31.305.2_106_6275_1.38.30.10_108_ship.zip
Hey, good find!
Dunno if i have time for flashing ROMs today but will have a look at some stage. Lol, dunno what's with the standard OS but nomenclature of radio rom is intriguing.
PS just noticed you're in adelaide. Good form
Hi there...have downloaded the RUU already and made the nbh with GSM.nb only...but have no time to make the upgrade...if someone have made the upgrade already post if it is all OK...
regards,
Primoz
I didnt know we could flash GSM via mtty? Thought we needed an RUU.
Unless im missing something?
mshagg said:
I didnt know we could flash GSM via mtty? Thought we needed an RUU.
Unless im missing something?
Click to expand...
Click to collapse
look in the Wiki the upgrade guide...I have followed the guide to get rid of the SPL, OS, extrom,...and left just the GSM.nb inside and will update via RUU...
Regards,
Primoz
Pc78 said:
look in the Wiki the upgrade guide...I have followed the guide to get rid of the SPL, OS, extrom,...and left just the GSM.nb inside and will update via RUU...
Regards,
Primoz
Click to expand...
Click to collapse
That makes sense
Apologies, im new to all of this... slowly getting through the wiki!
Pc78 said:
Hi there...have downloaded the RUU already and made the nbh with GSM.nb only...but have no time to make the upgrade...if someone have made the upgrade already post if it is all OK...
regards,
Primoz
Click to expand...
Click to collapse
Could you please upload extracted RadioROM to rapidshare or megaupload ?
am doing it now... stay tuned
I extracted the radio rom. It is 1.38.30.10, flashed it with the new Custom RUU works great. I'll test it today to see if there's any noticable difference between 1.38.00.10. Here it is if anyone wants it. When it doubt use Force Using SSPL.
http://rapidshare.com/files/22823346/Radio_1.38.30.10.rar.html
guapinoy said:
I extracted the radio rom. It is 1.38.30.10, flashed it with the new Custom RUU works great. I'll test it today to see if there's any noticable difference between 1.38.00.10. Here it is if anyone wants it. When it doubt use Force Using SSPL.
http://rapidshare.com/files/22823346/Radio_1.38.30.10.rar.html
Click to expand...
Click to collapse
changes are minor... 3G fixes for the 850Mhz networks here in AUS....
well some parts of cingular runs 3g in 850 like here in jacksonville...so might help some of us here too
I have just flashed it, i havent had any problems with 1.38.00.10 on Telstras NextG network, so will see how this one goes. ;-)
Hi all, I've just installed the WM6 Black 1.2 and Hard SPL 1.10 Oli to my Jasjam, very nice. It took me all last weekend to reinstall the Applications and data.
My current ROM is 3.22.200.4 and Radio Rom is 1.20.31.10. I've just want to know:
1. Is it worth just install this Radio Rom only 1.33.30.10 to improve my GSM reception and WIFI.
2. Also if I install the Radio Rom only- do I still have to reinstall every Applications AGAIN.....
Cheers
pl55 said:
1. Is it worth just install this Radio Rom only 1.31.305 to improve my GSM reception and WIFI.
Click to expand...
Click to collapse
About 1000x said there is NO improve in WIFI with radio ROM...this is part of the OS and not the Radio ROM...yes it is worth if you have any older version than 1.38.00.00
pl55 said:
2. Also if I install the Radio Rom only- do I still have to reinstall every Applications AGAIN.....
Click to expand...
Click to collapse
It depends on the way you do the install...cause the latest RUU (original one) make task 28 on the end of the install and this mean HARD RESET...I will do my update from SD card...
Regards,
Primoz
Well I've been using it for a day now and haven't noticed any huge improvement in the radio but I with more use it may prove to be better.
Noticed the new MS Packet Video player. Guess this is to solve the problems Telstra customers were having with no Foxtel sevices on the Jasjam. I believe it was an issue of Media Player not being compatible.
Also a few small changes to Telstra customizatons. No changes to WM5, still AKU 2.3.
Maybe my imagination, but I thought I used to be able to turn on Flight Mode (radio off) and still have WiFi on, but can't now. Also the tab in Phone options to Update Time has gone, and there seems to be one less tab in the WiFi settings. Guess you can get them back with reg hacks.
Funny how everyone raves about how fast WM6 feels when they first install it... this update made me realise how fast WM5 feels when it is a new/clean install.
I uploaded the Radio Only with the Olipro RUUWrapper so it wont HR after you install. Also NON rapidshare mirror.
http://www.bestsharing.com/files/INdT1250288/RUU Radio Only 1.38.30.10.exe.html
A reference:
Last Updated: 27 March 2007
As a further enhancement to the Next G (TM) network, Telstra will carry out a platform upgrade which will affect i-mate JASJASM users and will require them to carry out a software upgrade for their handsets. This software upgrade will be available on a CD and on the www.imate.com/jasjamsupport website.
Customers who purchase an i-mate (TM) JASJAM must be informed prior to purchase that their i-mate JASJAM handset will require a software upgrade. Customers must be told that this software upgrade is available on the www.imate.com/jasjamsupport website. CDs with the software upgrade will be available on request from the website soon.
Post the network upgrade, the customer will need to have installed the new software on their device in order to maintain simultaneous voice and data connectivity.
Before the network upgrade, all Telstra i-mate (TM) JASJAM users will be sent an SMS, followed by a direct mail piece with instructions on how to facilitate the upgrade.
Note: the customer must download the upgrade to a PC then to the handset. There is no provision to download directly from the imate site to customers handsets.
Customers are advised to backup all personal data prior to downloading the software to their device.
Click to expand...
Click to collapse
From that link, the enhancements :
The essential service enhancements include:
• Network enhancement: this upgrade will even further optimize the performance of your i-mate™ JASJAM on the Telstra Next GTM network, taking full advantage of all the latest network enhancements and ensuring you can continue to make/receive calls during a data transmission eg. Direct Push Email.
• Time Zone fix: currently some of your appointments may appear to be shifted forward by one hour. This may have occurred when daylight savings commenced. The service upgrade will help stop this occurring.
• Unknown USB device driver fix: you may have seen an "Unknown USB device" error message appear on your screen. It is extremely intermittent, and only experienced by a small number of devices. The service upgrade will help stop this error occuring.
• Screen Backlight fix: you may have experienced your back light not turning on making it difficult to read the screen. It is extremely intermittent, and is only experienced by a small number of devices. The service upgrade will help stop this occurring.
• Freeze fix: you may have experienced your device freezing up. It is extremely intermittent, and is only experienced by a small number of devices. The service upgrade will help stop this occurring.
• Bluetooth® fix: this enhanced version of Bluetooth® is designed to improve the ability to connect your i-mate™ JASJAM to other Bluetooth® compatible accessories eg. Bluetooth® headset or car kit.
Click to expand...
Click to collapse
"extremely intermittent" device freezes? Some here would beg to differ.
Anyone extracted the cab files from EXTROM?
Hi
Are the new Windows Media streamer install file located in the EXT rom?
Can anyone extract those from the installation file and post them somewhere?
Thanks
JY
guapinoy said:
When it doubt use Force Using SSPL.
Click to expand...
Click to collapse
While it's technically OK to use with the radio ROM you created, it's bad advice in general (particularly if you have Hard-SPL installed). The "Force SSPL" option should only be used to upgrade/downgrade Hard-SPL. The latest Custom RUU (V4) has SPL auto-detect. When it doubt, use that!
naydonov said:
Hi Guys
I have just noticed that there is new ROM published on www.clubimate.com today.
QUOTE]
Hei! Can you look for a spanish Hermes rom in cluImate? Is there one? If so, could you download it for me? Thank you
Click to expand...
Click to collapse
Hi all,
New to this forum. Actually, new to the device (so PLEASE be gentle ). I have an AT&T/Cingular 8525 I got two nights ago (14 Aug) and am trying to upgrade to the latest release version for Cingular. I've downloaded and installed the RUU file on my desktop computer.
When I execute it, I go through the steps as indicated, and when it gets to the point where it starts to push the update - my ActiveSync on the desktop shuts down. I then get the failure message and am left in the cold.
My device came with:
ROM 1.34.502.1
Radio: 1.16.00.00
Protocol: 32.53.7018.01H
I'm running ActiveSync v4.5.0 build 5096.
What am I doing wrong?
Thanks,
Joe
edit: I've been reading the upgrading notes on this forum, and haven't seen anywhere the problem with ActiveSync closing down. Also, didn't find this forum until AFTER I started looking at ROM upgrades. I'm surfing around now so I don't brick my phone.
What OS you running? Vista? XP?
Keep reading as you are doing now - good work.
Desktop OS is XP MCE
My desktop is running XP Media Center Edition, and I'm up to date with the service packs and other High Priority and Optional updates (via Windows Update).
I am able to ActiveSync with the Desktop without a problem. It remains connected and data is passed. I can browse the device.
When I try to execute the RUU file, I hear the "device disconnect" sound, the ActiveSync window closes (I've been leaving it open on the desktop), and then the upgrade times out.
WTFO.
I continue to read, but may end up keeping the unit on the original software (not my optimal solution). Anyone else experienced the ActiveSync termination problem on the desktop?
Thanks again,
Joe
Well, have you upgraded anything? Like upgrading the SPL to HardSPL?
What I would do, is this:
1. Read Mrvanx.org upgrade guides.
2. Put HardSPL on there. (If you have the disconnect problem, just put the phone in Bottloader mode, then plug into USB, then run the RUU.)
3. Upgrade to whatever ROM. Try the normal way, if that doesn't work, try the "start in bootloader" method described above or try the SD Crd flashing method.
I personally, take apart any ROM that I want to flash (use winrar to extract the exe and dutty's good nbh tool to extract and rebuild the nbh) and use the most recent custom_ruu and flash that way. I never use whatever RUU is packaged with the ROM. I don't have communication problems. Give it a try, don't give up. If you need to find stuff, try the google search link in my signature - the best way to find stuff on the forums.
Todd,
Thanks for the replies. I just downloaded HardSPL, and will try that when I get home tonight. I also downloaded "Hermes_WM6_WWE_vp3G_v3[1].0.0_ATT.rar" to upgrade to WM6.
To answer your question, no, I haven't upgraded anything (yet). I have been able to put a couple of programs on the device (Battery Pack Pro, Photo Contacts Pro, and Conversions in Hand), and they all work fine.
I'll try the bootloader method if I can't get ActiveSync to make it happen.
Stand by for my (hopefully happy face) post(s) tonight.
Joe
Well, I'm wearing my smiley face 'cause I was able to successfully flash an update into my 8525 last night. While I didn't do it on this machine (my desktop - didn't try), I was able to install Hard-SPL and upgraded to WM6 from a different computer.
I am still running radio version 1.16.00.00, but will try to update that over the weekend. I figued that since I haven't BRICKED this thing yet, I'll keep working on it until I do .
Thanks to all (especially the over 970 postings in the Hard-SPL thread - I read through ALL the pages). This is a great site and I'm looking forward to customizing the H3LL out of this phone.
Joe
marinerjoe said:
Thanks to all (especially the over 970 postings in the Hard-SPL thread - I read through ALL the pages).
Joe
Click to expand...
Click to collapse
Reading through the pages is why you are wearing your smiley.
Glad you got it going. Since you are on AT&T, I would suggest you start with Radio 1.50 or 1.48. Those are the ones I have had the greatest success with. 1.48 was shipped with a Cingular update and 1.50 is the newest. I don't know what carrier it shipped with, but it has worked well for me and others I know who are on Cingular.
Good luck and have fun!
todd_jg said:
Since you are on AT&T, I would suggest you start with Radio 1.50 or 1.48. Those are the ones I have had the greatest success with. 1.48 was shipped with a Cingular update and 1.50 is the newest. I don't know what carrier it shipped with, but it has worked well for me and others I know who are on Cingular.
Good luck and have fun!
Click to expand...
Click to collapse
Thanks. I'm thinking about 1.48 as I've seen a number of folks with it in their profile. Since I loaded Hard-SPL on the device, I should be able to safely update just the radio, right?
Any benefits to going all the way to 1.50?
Joe
Edit: I upgraded to radio 1.48 (using MrVanx guides). The step-by-step procedure was absolutely OUTSTANDING! I have tested the phone, and IT WORKS! Only difference is now I connect via Edge (shows an E), before it was GPRS(?) (it showed a G). Does it really matter which connection method it uses?
marinerjoe said:
Thanks. I'm thinking about 1.48 as I've seen a number of folks with it in their profile. Since I loaded Hard-SPL on the device, I should be able to safely update just the radio, right?
Any benefits to going all the way to 1.50?
Joe
Click to expand...
Click to collapse
Yeah, you can do just the radio. No problems.
Regarding 1.50, I personally get better battery life. Reception seems about equal to 1.48 for me. Performance is highly dependent on your geographic specifics. Personally, I would put 1.50 on for a few days, then try 1.48 for a few days. Then you can pick whichever one works best for you.
Thanks. As you can see from my edit, I successfully updated to 1.48. I'll use this as my baseline and then see about going to 1.50 in a bit.
Thanks again,
Joe
marinerjoe said:
Well, I'm wearing my smiley face 'cause I was able to successfully flash an update into my 8525 last night. While I didn't do it on this machine (my desktop - didn't try), I was able to install Hard-SPL and upgraded to WM6 from a different computer.
I am still running radio version 1.16.00.00, but will try to update that over the weekend. I figued that since I haven't BRICKED this thing yet, I'll keep working on it until I do .
Thanks to all (especially the over 970 postings in the Hard-SPL thread - I read through ALL the pages). This is a great site and I'm looking forward to customizing the H3LL out of this phone.
Joe
Click to expand...
Click to collapse
Hello marinerjoe,
I have tried to upgrade my friend's Hermes and experienced the same problem. Instead, I can flash Hard-SPL on it but fail at upgrade (being kicked out by the Activesync).
May I know if you just complete the upgrade with a different computer with nothing else? Could you advise me your path of success?
t1tough said:
Hello marinerjoe,
I have tried to upgrade my friend's Hermes and experienced the same problem. Instead, I can flash Hard-SPL on it but fail at upgrade (being kicked out by the Activesync).
May I know if you just complete the upgrade with a different computer with nothing else? Could you advise me your path of success?
Click to expand...
Click to collapse
I did not attempt to do the upgrade from the same desktop machine upon which I had my problems. Instead of trying some troubleshooting suggestions I read on this site, I took the easy way out . I went to a different machine that I had administrator priveleges on, and did it there.
The difference between the two machines? My desktop has Symantec Antivirus and the Symantec firewall. The other machine (that worked) doesn't have the firewall. There are other differences also, but I'm thinking the firewall might have been a contributing factor.
Others on this board with WAY MUCH more experience with me can tell you if I'm full of SH!T or not (there are some here who aren't shy or afraid to FLAME SPRAY those less ed-ju-ma-cated).
Sorry I couldn't be of more help. GOOD LUCK!
Joe
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
Hello everybody...
I just bought an PM200 (German T-Mobile Edition), WM5 says its a PM200.
After that I installed the aku 3.3 and everything worked fine...
Then I tried to install the "Charmer_Touch_GER_Ridingshark_Beta_3.2".
But while Writing the new TouchFLOW OS ROM i got the error... "Could not update itsutils.dll to the current version, maybe it is in use?
try restarting your device, or restart activesync
But i realized it to late and already made a Hard Reset...
Then the Touch-Flow UI tried to install and the i got the WM error:
"The file : \windows\XDADev_BatFix.exe does not exist".
But i cant go on with the install but it doesnt matter which button i push...no one responds...
Then i downloaded the XDADEV_Batfix.cab but that dowsnt work...sure because it isnt the exe file...
Can anybody help me with tha prob?
I also treid to install the WM6 update again but i always get the itsutils.dll error...
Geetings to all
Markus
Here is how to do it:
Flash back to WM5 using bootloader. Press camera button during reset.
If you see the screen with the 3 colours plug in the USB cable and wait till the Device is installed. Now run the T-Mobile uptade (Best is to use Akku3.3).
After it is finished connect to active sync and go to the Folder were the WM 6 upgrade is in. Now install the two cabs out of the folder where the WM6 ROM is in, on your device and make a soft reset. After that run the upgrade File. It will go same as before, but there will be no error and it will update completly.
Have a nice time with WM6
ChrBeck
Can i writ you a pm, it will be much better for me to write you in german...
In der PM in Deutsch geantwortet.
Answered in German in a PM.
Ok, the prob is solved.
I just want to write it down here, if anybody has the same prob...
Thanks again to ChrBeck, I also used the search in this Forum to get it solved but i could find anything useful.
The only thing I had to do was to install the to cab´s (Cert_SPCS.cab and EnableRapi.cab witch are already included in the Charmer_Touch_GER_Ridingshark_Beta_3.2.rar.
The first Step was to update the WM5 Version to the aku 3.3. Then I transmitted the 2 Files with activeSync and installed them on the Charmer just with thip on each File. And the last Step was to flash the new WM6...
DONE....
Its so easy if you know what to do and with help from some users...
Greetings MArkus
This is the thing I have written before. But it is not easy to understand, if you don't know much about it.
@all: And now much fun with WM.
Have a nice day
ChrBeck
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
ERMANO.ESTE said:
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
Click to expand...
Click to collapse
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
How to get mac address
lakeman said:
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
Click to expand...
Click to collapse
Thanks alot lakeman for ur help.
SOLVED OUT THAT ISSUE, BUT FACED A NEW ONE.
I M STUCK AT BOOTLOADER SCREEN WHILE TRYING TO INSTALL WM6.5.
BUT I FIGURED OUT A WAY BY USING MAC AND MTTY FORMAT.
BUT I DONT KNOW HOW TO GET MY MAC ADDRESS WHILE THE ONLY THING I CAN ACCESS IS THE BOOTLOADER SCREEN?
IS IT PRINTED SOMEWHERE ON MY DEVICE OR MANUALS OR IS THERE ANY SPECIFIC COMMAND FOR THAT?