26/04/08 Update: some "i dislike" solved, check AP4 FAQ for solutions, Tips and Tricks
I am trying to open this thread to help AP cookers to have a single point to check for pro and cons in AP4, avoiding to post BUGS here.
Please explain WHY you dislike something
I've tested it for a while and:
I LIKE:
better battery life in my regular usage
the self portrait/landscape function
touchflo responce (after some tuning)
WM6.1 (SMS and IE)
Latest opera
Stability
I DISLIKE
The BIG htc home (to much home screen real estate used), and resources hungry too! (FULL SOLVED BELOW, 4th post)
The new USB Storage can't show the microdrive (PARTIALLY SOLVED BELOW, 4th post)
The slow keyboard responce (I've installed RESCO too, same delays) (FULL SOLVED BELOW, 4th post)
The comm manager without 3g enable/disable (good for battery saving purposes)
The flashing process, without any user control (I've copied the file unzipped during the installation process and i've dome some "reverse enigineering") I believe it could be done using a simpler command file, from command prompt windows, explaining step by step what is going on. Less "tricolours screen" and better debugging
sergiopi said:
I am trying to open this thread to help AP cookers to have a single point to chek for pro and cons in AP4, avoiding to post BUGS here.
Please explain WHY you dislike something
I've tested it for a while and:
I LIKE:
better battery life in my regular usage
the self portrait/landscape function
touchflo responce (after some tuning)
WM6.1 (SMS and IE)
Latest opera
Stability
I DISLIKE
The BIG htc home (to much home screen real estate used), and resources hungry too!
The new USB Storage can't show the microdrive
The slow keyboard responce (I've installed RESCO too, same delays)
The comm manager without 3g enable/disable (good for battery saving purposes)
The flashing process, without any user control (I've copied the file unzipped during the installation process and i've dome some "reverse enigineering") I believe it could be done using a simpler command file, from command prompt windows, explaining step by step what is going on. Less "tricolours screen" and better debugging
Click to expand...
Click to collapse
thanx for the opinions and feedback. for the slow keyboard response i would try the tweak that turns off the et9. its found in the main thread and will come in the new version of the config app.
the comm mananger was already in the x7510 rom so i just kept it as it is. i see though that it would be a good idea to add the 3g. i need to check if this comm mananger supports changing its function like the one i have in my polaris rom. then i could just have cmonex add a new tab to the config app where u check what options you like in the comm mananger.
i believe the usb to pc tool when turned on to mass storage mode lets you add to the microdrive.
the big htc home can be replaced with the smaller qvga one via the addons rar.
the flash process you would need to discuss with olipro/cmonex. i though believe its as simple as possible right now but i could be wrong.
A problem, for my important one, is that it occupies much memory. It is to say..., in my single country exist maps for GARMIN XT and if I install MANILA to him DIALER does not load GARMIN to me XT by lack of memory, if I install plugins to him in the TODAY does not load the GARMIN to me by lack of memory...
in the AP3 no....
Some Dislike Solved
1. Big HTC Home
go to http://forum.xda-developers.com/showpost.php?p=2053447&postcount=2
download addons.rar
unrar and install HTCHome_1025_721_ALL.cab
FASTER, also in portrait/landscape switching!
2. USB to Storage and Microdrive
Miletb suggest to change:
HLKM\Drivers\USB\FunctionDrivers\Mass_Storage_Clas s\DeviceName from DSK2:
to
DSK1:
it will work fine - transfer speed is also good
If you want storage card later you will need to change back to DSK2:
3. SLOW KB FEEDBACK:
PAWEL sugges to to change:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
to
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
this will fix 1)the suggestions dialog in sms/emails being missing 2)the accented characters 3)the slow Kb feedback
P.S. To reduce/cancel the TT landscape/portrait switching during driving, just tune the position of the gooseneck support. It is stable in my tests in landscape mode leaving the top 2 cm backward from the bottom (the top is closer to the windscreen). I drive a Nissan Pathfinder http://www.nissanusa.com/pathfinder/ and my tests were really HARD
sergiopi said:
[*]The flashing process, without any user control (I've copied the file unzipped during the installation process and i've dome some "reverse enigineering") I believe it could be done using a simpler command file, from command prompt windows, explaining step by step what is going on. Less "tricolours screen" and better debugging
[/LIST]
Click to expand...
Click to collapse
sorry but I doubt what you did can be called "reverse engineering"
exactly what is your suggestion anyway? is the way HTC wrote ROMUpdateUtility.exe not good enough for you? or what did you mean, please elaborate.
cmonex said:
sorry but I doubt what you did can be called "reverse engineering"
exactly what is your suggestion anyway? is the way HTC wrote ROMUpdateUtility.exe not good enough for you? or what did you mean, please elaborate.
Click to expand...
Click to collapse
Reverse engineering in simple words means to use tools to monitor the program execution, dump the memory used, the data flow trought the USB port, then to have a team analyzing all the info and trying to understand what's going on (and I have time, tools, and team)
I mean the process control. RUU is just a PART of the AP4 flashing process. If I want to flash AP4 again I can't do without flashing the SPL again.
You've built a new tool, NOT a plain RUU. AP3 new version is a plain RUU, AP4 IMHO is a batch process launching RUU, undocumented
I like to have a clear view of the processes, is hard to ask to HTC to show their processes, and you and olipro (and some others, POF is great too..) have done a good job in RUU reverse engineeering (RUU is a batch process too, from HTC...). I would like to have the AP4 .exe documented, having also the view of the .nbh and of the other tools used. May be others can build a new ROM to share, based on the new partitioned ATHENA!
The ATHENA flashed with your tool now is the WORST ATHENA in the world
1) no warranty, no way to go back
2) the only ROM available are AP3 and AP4. None can put a new ROM on it!
3) no official ROMs anymore
4) no "self cooked" ROMs anymore
PRACTICALLY SPEAKING IS NEEDED:
1) a simple tool to go back
AND/OR
2) a clear documentation of the changes done and the tools used
BTW I respect your good job, a tuned AP4 is a good ROM, and we are here to help ATHENA/AP4 to be the best device (and to play with knowledge)
3G button in comm manager solved
Just use schap's advanced configuration tool and ADD it Download it from here: http://forum.xda-developers.com/showthread.php?t=367043
I've removed the push e-mail button because the AP4 comm mgr default layout can have 6 buttons only, and I've added the 3G on/off.
The tool could be "device customized" shoul be nice to have an ATHENA version....
sergiopi said:
Just use schap's advanced configuration tool and ADD it Download it from here: http://forum.xda-developers.com/showthread.php?t=367043
I've removed the push e-mail button because the AP4 comm mgr default layout can have 6 buttons only, and I've added the 3G on/off.
The tool could be "device customized" shoul be nice to have an ATHENA version....
Click to expand...
Click to collapse
so i guess i have the comm mananger in there that u can set what items you want in it. hehe ok there will 100% be a 4.1 I think that will be finally what people wanted from 4.0 and i'll make this one a public beta first so we wont have any issues like 4.0
thanks for your post, I might have previously misunderstand your word usage of RE. so what did you do exactly?
because you people were so impatient we just released AP4 and a flasher, if you all had waited patiently, you'd have got it with extras, such as AP4 vanilla (not requiring new SPL), a standalone AP4 full feature rom (with special NBH header so only new SPL will accept it so no risks!!), and a downgrader utility.
but you will get those anyway just wait a bit more patiently.
until then, if you have an urgent warranty problem and *must asap* downgrade to stock ROM, just let me know in a PM.
also, you are a bit wrong about flashing the SPL again - the AP4 flasher checks if you already got SPL 3.50 on, if you do have 3.50 then it will not reflash the SPL (as that would be pointless as we can agree).
what kind of documentation do you need of the AP4 flasher?
here's what it does:
1. you run the athenaupdater exe, it seems to be waiting for something while it extracts itsutils (pmemdump and stuff)
2. the something is to determine if the Athena is running WM or is put in bootloader (if some moron doesn't read the excellent HowTo a link to which is included at the athenaupdater download) - it does it in the following way: attempts to push pmemdump to the athena, if that fails then after 1 min of waiting it'll error out and shows you the ****sticks message
3. if it finds the athena running WM then it also checks the bootloader version by reading a fixed memory location. then compares bootloader version to 3.50, if it is 3.50 then it won't flash the new spl, if it is not 3.50 (can safely assume it is below 3.50) then launches RUU which then launches SSPL (named version 3.15 and will only accept signed SPL's, signed by public htcdevs cert) as the enterbootloader.exe
otherwise just launches RUU with normal enterbootloader and the overwrite protection of the SPL 3.50 won't let the SPL in the big NBH flash.
4. the NBH flashes and the athena is supposed to nicely reboot to AP4.
if you cancel the process you can be left with corrupt wifi/modelid.
+1: for extra safety the NBH has the special header already so no moron can flash it to SPL 1.20 if they manage to quickly put the device in bootloader after the pmemdump check ran.
well I think that's it.
one last question, what was the note about no self cooked roms?
it is entirely possible, you can take the nk.exe module either from AP4 or from AP3newSPL (or use AP3newSPL as base if you are afraid of xip) and use that to make your rom compatible with the new SPL.
and there'll be a downgrade tool anyway.
sergiopi said:
The tool could be "device customized" shoul be nice to have an ATHENA version....
Click to expand...
Click to collapse
yeah why not, if someone tells me exactly what options from that config app I should port to my config app
cmonex said:
yeah why not, if someone tells me exactly what options from that config app I should port to my config app
Click to expand...
Click to collapse
May be the best solution could be to build XML config file with AP4 cheats and import it into the Shaps default tool.
There are may tweaks in the "basic" tool usefull for AP4 too. Comm manager buttons and many others.
You have a great knowledge about AP4 and about the tweaks used, the fine tuning could be done using the Shaps tool, customized with your XML file as explained
From Schaps
(...) But things changed since 2.x releases, now you can add your own tweaks or translate Advanced Config. by yourself using XML files!
(...)
XML configuration files are named AdvancedConfig_XXXX.xml where XXXX is Locale ID (English and French available at the moment). They contain list of registry tweaks organized by categories.
Here is XML configuration file structure, which is quite simple:
Code:
<advancedconfig>
<category name="Category name" icon="Icon index">
<setting key="Registry key path" name="Registry value name" type="Registry value type">
<title>Tweak title</title>
<description>Tweak description</description>
<values default="Default value">
<value data="Value data 1">Value description 1</value>
<value data="Value data 2">Value description 1</value>
</values>
<restrict>
<value key="Registry key path" />
<value key="Registry key path" name="Registry value name"/>
<value key="Registry key path" name="Registry value name" data="Value data" />
<value key="Registry key path" name="Registry value name" data1="Value data 1" data2="Value data 2" data3="Value data 3" />
<devices>
<model>Device model 1</model>
<model>Device model 2</model>
</devices>
</restrict>
</setting>
</category>
</advancedconfig>Supported value types : integer, string, file, folder.
<values> tag can contain predefined value data for the tweak, which will be displayed in a list in Advanced Config.
<restrict> tag allows you to display the tweak only if it satisfies all the conditions bellow. In this example: Registry key must exist AND Registry value must exist AND value data must equal to specified data AND value data must equal one of those 3 value data AND device model must be one of those 2 models.
Don't hesitate to ask me if something is not enough clear.
You can download here English and French XML configuration files of the lastest Advanced Config. release (2.1.0.0), which is available in this sticky: http://forum.xda-developers.com/showthread.php?t=317070.
Click to expand...
Click to collapse
cmonex said:
(..)
because you people were so impatient we just released AP4 and a flasher, if you all had waited patiently, you'd have got it with extras, such as AP4 vanilla (not requiring new SPL), a standalone AP4 full feature rom (with special NBH header so only new SPL will accept it so no risks!!), and a downgrader utility.
(...)
Click to expand...
Click to collapse
Thank you, for the complete answer and the really interesting schedule
I am patient, as I told in other 3ds, and as many of us I like to play with WM6 knowledge.
I will suggest just a change in the schedule: Downgrader first, Vanilla second and AP4.1 (I've seen a lot of interesting improvements suggested from other users) third
So far these are my finding,
I LIKE:
1. the HTC and Athena Project logo - beautiful
2. the self portrait/landscape function – a little jumpy therefore disable it
3. touchflo response – excellence now I can brake
4. WM6.1 – no comments
5. Latest opera though not as responsive as IE, still trying hard diplomatically.
6. Stability – yes, as good as AP3
7. mic reception – great improvement compare to AP3, not sure is becuz of radio change, handfree call effortlessly
8. speed and memory – no issue so far with all my favorite sw running.
9. splash screen – beautifully done
10. HTC home – best with “ HTCHome_1025_721_ALL
11. AP 4.0 HTC X-Button – wonderful to kill background sw
12. WOW HD Setting – greatly improve audio quality in speaker and earpiece
13. GPS fix – better than before, could be due to radio version
14. Bluetooth - discovered range improved with my S705, never from AP3 or radio 1.50
sergiopi said:
Thank you, for the complete answer and the really interesting schedule
I am patient, as I told in other 3ds, and as many of us I like to play with WM6 knowledge.
I will suggest just a change in the schedule: Downgrader first, Vanilla second and AP4.1 (I've seen a lot of interesting improvements suggested from other users) third
Click to expand...
Click to collapse
we're considering this suggestion already
...and fourth is AP5! (yes we already have new interesting plans for that but shhhh for now )
sergiopi said:
1. Big HTC Home
go to http://forum.xda-developers.com/showpost.php?p=2053447&postcount=2
download addons.rar
unrar and install HTCHome_1025_721_ALL.cab
FASTER, also in portrait/landscape switching!
2. USB to Storage and Microdrive
Miletb suggest to change:
HLKM\Drivers\USB\FunctionDrivers\Mass_Storage_Clas s\DeviceName from DSK2:
to
DSK1:
it will work fine - transfer speed is also good
If you want storage card later you will need to change back to DSK2:
3. SLOW KB FEEDBACK:
PAWEL sugges to to change:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
to
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
this will fix 1)the suggestions dialog in sms/emails being missing 2)the accented characters 3)the slow Kb feedback
P.S. To reduce/cancel the TT landscape/portrait switching during driving, just tune the position of the gooseneck support. It is stable in my tests in landscape mode leaving the top 2 cm backward from the bottom (the top is closer to the windscreen). I drive a Nissan Pathfinder http://www.nissanusa.com/pathfinder/ and my tests were really HARD
Click to expand...
Click to collapse
Awsome
Would someone organise this in the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
is4 said:
Awsome
Would someone organise this in the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
Click to expand...
Click to collapse
Wiki updated with GPS best setting, PAWEL's Ftouchflo cab and et9 fix, CMONEX's AP4 installer info, HTC home fix and some others....
I will suggest to READ and WRITE the wiki....
READ and WRITE the wiki
sergiopi said:
Wiki updated with GPS best setting, PAWEL's Ftouchflo cab and et9 fix, CMONEX's AP4 installer info, HTC home fix and some others....
I will suggest to READ and WRITE the wiki....
Click to expand...
Click to collapse
thanks sergiopi
I appreciated your recent postings about the htc home alternatives and the trick about refinding a lost microdrive
I also recommend to others to READ and WRITE the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
Can't help myself
This thread is one of the most useful (meaning: if the info's not in here I have found it from what is here) about a ROM I have ever read.
More than that, I saw lots of potential for heated defensiveness, but somewhere that energy got sucked up (I hope it got burned off in the right place). I can't tell you how personally edifying it was for me to read such a grown-up and intelligent conversation in this forum.
I'm glad I have a x7501. Thanks.
Related
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option=...ge=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/show...keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/show...ighlight=vibra
Download here: http://forum.xda-developers.com/atta...7&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/atta...2&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
Post duplicated, use this one in WM6 forum:
http://forum.xda-developers.com/showthread.php?t=298919
Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
Now introducing... the HyperCore Athena ROM Kitchen!
First, though, props to anchillus and his HyperCore kitchen. I took it, and made a few small modifications so that it's built for the Athena instead.
Feature Highlight:
Since this is a full-blown ROM kitchen, you can tweak your own ROM however you like. You can do anything that you've seen other people do with their ROMs! All that customizability is at your disposal.
Prepopulated with Windows Mobile 6.1 from the HTC Diamond (5.2.19915).
Prepopulated with applications from the HTC X7501, HTC X7510, and HTC Diamond.
Pictures are not being posted because you already know what Windows Mobile looks like - it's up to you to make it look pretty.
Installation:
Unzip. The "Core" folder goes in as C:\Core. The "HyperCore" folder can go wherever you like; the default HyperCore installer puts it on your desktop.
If you're on SPL 1.2, you'll need to copy an SPL 1.2 OS.nb on top of HyperCore\Build\ROM\OS.nb.
Instructions:
If you want to get your hands dirty right away without reading through the HyperCore instructions, here's the extremely quick version (if you already know how to handle a ROM kitchen):
Make changes in HyperCore\Build. SYS contains the base Windows Mobile 6.1 files, while OEM contains folders that HTC or you provide.
Once you've tweaked SYS and OEM to your heart's content, under HyperCore\Panel\Build, run BuildOS. You'll need to run [1] and [2] to build OS.nb in HyperCore\Build, and then [3] to convert OS.nb to RUU_signed.nbh.
Flash your ROM onto your phone.
...
...
Profit! (j/k)
If you encounter the endless customization loop problem, edit HyperCore\Build\OEM\OEM_Lang_0409\initflashfiles.dat, then find and remove the section for AutoRun.
Known issues/concerns:
The XIP is the XIP from AP 5.0 beta (build 19588.1.1.4, which was from the Sony X1 Xperia ROM). I've tried to generate a matching XIP for the ROM, but it won't boot. Anybody around here know how to create a good XIP?
There seem to be some issues with the Bluetooth OBEX service not being able to start. That's true of this ROM as well. It's able to send files to a PC without a problem, but it can't receive files (although it can copy them).
Even though screen rotation works both in the operating system and in HTC Album, HTC Album's screen rotation has the chance to screw up the operating system's screen rotation. A workaround is to use an application that can restart services (such as the FdcSoft Task Manager) to restart HTC Sensor Service (Athena).
Although the phone skin does work on 128 and 96 dpi, the speed dial application can act flaky and start drawing itself off-screen, which can trigger an error. One workaround is to dial a single number, then rotate the screen, which forces a redraw, after which it functions properly.
The VGA HTC Home plugin could be in slightly better shape. The TabSetting registry entry doesn't seem to work (or at least nobody's responded to me here yet), and the Profile tab shows a keyboard vibration option that, naturally, doesn't work.
The enlarged start menu has some icon overlap on 128 dpi.
The nifty System Status popup on 96 dpi seems to trigger just to the left of the connectivity indicator, while not triggering on the connectivity or signal strength indicators. It does work, just a little strangely on the other dpi settings.
Sym-A now generates the _ character instead of the $ character.
During phone calls, the number keypad is active instead of the alphabetic keyboard.
NOTE:
Much as with Athena Project Kitchen, this ROM kitchen is not to be used for releasing ROMs. It's for personal use only. We really don't need twenty-billion ROMs flooding this forum from everybody who wants that one little tweak.
Exceptions can be made for people who have demonstrated a solid history of producing ROMs. Ask if you feel like you have a strong case for why your ROMs need this kitchen. The current exception list: irus.
Download links:
Megaupload
RapidShare
Other file sharing site suggestions welcome.
Fixes/patches:
Attached to this post. Replace:
HyperCore\Tools\RUU\Athena_RUU.exe with the one from Athena_RUU.zip
Core\ACK\Settings.txt (Updated: July 20, 2008)
I'll be adding additional information to the next few posts over the next several days as time permits (and questions pop up).
P.S. The restriction about personal use isn't about elitism. It's about keeping the forum organized. I just don't want to see every other thread in the forum being a ROM release thread, and there's no reason to make sergiopi's job harder by making him keep track of dozens of minimally different ROMs.
Additional OEMs
NOTE: If you're add OEM packages with modules, you will want to run G'Reloc in your HyperCore\Build directory before you run BuildOS.
HTC EzInput 1.5.31226.0/HTC XT9 1.5.31232.0:
A keyboard designed for use with fingers. There are two large button keyboards (portrait and landscape versions), along with a phone keypad keyboard. The portrait/landscape keyboards swap automatically with the screen orientation. Only works properly in 192 dpi.
Megaupload
HTC LongPressEndKey 1.1.33562.2:
A nifty quick menu program that provides a number of convenient functions. A little less useful on the Athena due to, well, the lack of an end key, but potentially useful regardless. Not tested in other resolutions yet, but likely only works properly in 192 dpi.
Megaupload
Microsoft .NET Compact Framework 3.5.7283.00:
Required for running .NET Compact Framework programs. Meant to replace SYS\NetCF.
Megaupload
WkTask 1.1.7.3c:
A task manager that alters the taskbar to function more like that in traditional Windows, in addition to providing a battery bar and task launcher.
Megaupload
If you would like to change your extended ROM to add packages there for automated installation upon hard reset, you can use the extended ROM editor. You can then convert that with Dutty's NBH tool (available in the kitchen in HyperCore\Tools\Convert) and reflash.
Kitchen Tweaks/Suggestions
Additional OEM Packages:
It's quite possible to find OEM packages out there for quite a bit of software, in order to save yourself time in making your own. If you can't find one, though, there are a number of links on how to assemble your own OEM package - for example, there's a wiki article about making your own OEM package, which also has a bunch of links to existing OEM packages. Just be aware that most of the OEM packages you'll find out there are designed for 96 dpi, and thus may not work on the Athena the way you might expect - the Spb applications are a pretty good example of these, as they come with separate VGA resources.
Package Recommendations:
If you're going to make registry changes, it's usually a good idea to make a custom EM package to contain them. I would recommend using the UUID ffffffff-ffff-ffff-ffff-ffffffffffff, as that will force it to be the last registry file processed (ensuring that your registry entries "win" over those in any other OEM packages).
Package Dependencies:
PACKAGE_Diamond_Album_HTC_ALL can't function properly without PACKAGE_Diamond_HTCGesture, PACKAGE_Diamond_SensorSDK, and X7510_GSensor
PACKAGE_Diamond_VolumeControl depends upon resources in Diamond_LargeTitleBar
RealVGA_DPI_96 depends upon the *_DPI_96 directories in SYS
RealVGA_DPI_128 depends upon the *_DPI_128 directories in SYS
X7510_AudioManager refers to X7510_AudioBooster (menu option)
X7510_TouchFlo depends upon PACKAGE_Diamond_SmartTouch
PROVXML Changes:
If you want to change how your ROM thinks of itself, change HyperCore\Build\OEM\OEMVERSION\mxipupdate_OEMVERSION_100.provxml. ROMVersion is currently set to "Athena_6.1", but feel free to change that to whatever you like.
Registry Changes:
Here's a starter list of potential registry changes.
Code:
[HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders]
"Cache"="\MicroDrive\Internet Explorer\Cache"
"History"="\MicroDrive\Internet Explorer\History"
Move your Pocket IE cache and history to your MicroDrive.
Code:
[HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"MaxConnectionsPerServer"=dword:00000008
Increase the number of simultaneous connections Pocket IE makes to servers to 8.
Code:
[HKLM\Comm\Security\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}]
"AEFrequencyType"=dword:00000002
Prevent Windows Mobile from screen-locking while plugged in.
Code:
[HKLM\Software\Microsoft\Internet Explorer\Navigation]
"4-Way Nav"=dword:00000000
Have Pocket IE-based widgets scroll by screen, not by link.
Code:
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"Flags"=dword:00000000
"Options"=dword:00000000
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
Enable the Today Screen Wireless plugin.
Code:
[HKLM\System\CurrentControlSet\Control\Power]
"WakeupPowerOff"=dword:0000003c
Go back to sleep faster when auto-waking (60 seconds).
Code:
[HKLM\System\GDI\GLYPHCACHE]
"limit"=dword:00008000
Increase the graphical caching. A good size has not yet been determined, although this is the value often recommended for QVGA devices (a VGA device likely needs more).
Code:
[HKLM\System\GDI\SYSFNT]
"CS"=dword:00001000
Increase font caching.
Code:
[HKLM\System\GWE]
"Animate"=dword:00000000
Disable window animation.
Code:
[HKLM\System\GWE\Menu]
"AniType"=dword:00000000
Disable Start Menu animation.
Kitchen History
To be filled in.
Good work!
But...the xip version is after 5.2.thisisxipver and system build is there (Build xxxxx.x.x.x)
You have got a little error
michyprima said:
Good work!
But...the xip version is after 5.2.thisisxipver and system build is there (Build xxxxx.x.x.x)
You have got a little error
Click to expand...
Click to collapse
That's the thing, though - it doesn't matter much to me that it displays the XIP/system version there. Now, if other people care enough to go and change that, it's entirely up to them.
Sogarth said:
That's the thing, though - it doesn't matter much to me that it displays the XIP/system version there. Now, if other people care enough to go and change that, it's entirely up to them.
Click to expand...
Click to collapse
okey...
But...i have my kitchen because previously there arent one...
I can download it for oem packages...
XIP and SYS porting Guide
http://forum.xda-developers.com/showthread.php?t=379598
Here a tutorial and many info... from ababrekar, witha a pictorial guided step by step to download
Sogarth,
Thanks for introducing this kitchen
When I unzipped the download, I had more than 4000 error displayed. Could I ignore them?
Also, you mentioned that for spl1.2, I need to replace the os.nb in the HyperCore\Build\ROM\ directory. But I found that directory to be empty to start with. Is there supposed to be an spl3.5 os.nb there already?
Is this base ROM the same as the one we have been testing in the base wm6.1 thread?
sergiopi said:
http://forum.xda-developers.com/showthread.php?t=379598
Here a tutorial and many info... from ababrekar, witha a pictorial guided step by step to download
Click to expand...
Click to collapse
xipport is old...i use dump rom and build xip by bepe... + ervius pkgtools&buildos
been waiting for a good kitchen for ages. thanks a lot. what build is actually included?
rory
Nice job sogarth, I was looking foward to this all week. i will be giving this a try today
eaglesteve said:
Sogarth,
Thanks for introducing this kitchen
When I unzipped the download, I had more than 4000 error displayed. Could I ignore them?
Also, you mentioned that for spl1.2, I need to replace the os.nb in the HyperCore\Build\ROM\ directory. But I found that directory to be empty to start with. Is there supposed to be an spl3.5 os.nb there already?
Is this base ROM the same as the one we have been testing in the base wm6.1 thread?
Click to expand...
Click to collapse
i am having the same problem is anyone else having this problem
irus said:
i am having the same problem is anyone else having this problem
Click to expand...
Click to collapse
Yep , same here!
michyprima said:
xipport is old...i use dump rom and build xip by bepe... + ervius pkgtools&buildos
Click to expand...
Click to collapse
That's exactly why I haven't linked the first post only but the THREAD address, 24 pages of Q&A, links and files
I have the same problems with sogarth kitchen, the file could be corrupted
Blah. I guess that's what I get for using 7-zip + .zip + BZIP to try and keep everything uber-small. I'll rezip everything and re-upload. *sigh*
works for me if you open in the latest 7zip beta proper, rather than right click and extract here.
Sogarth said:
Blah. I guess that's what I get for using 7-zip + .zip + BZIP to try and keep everything uber-small. I'll rezip everything and re-upload. *sigh*
Click to expand...
Click to collapse
Megaupload kitchen re-uploaded. Rapidshare kitchen in progress.
fards said:
works for me if you open in the latest 7zip beta proper, rather than right click and extract here.
Click to expand...
Click to collapse
I'm pretty sure it works for 7-zip - I think it just doesn't work for non-7-zip .zip supporting programs.
Sogarth said:
I'm pretty sure it works for 7-zip - I think it just doesn't work for non-7-zip .zip supporting programs.
Click to expand...
Click to collapse
well it's about time they started using proper software then
My wife recently got a Sprint Touch Pro, and considering the flashing junkie that I am (and how much I hate stock roms), the first thing I did was to jump in here to see what could be done about it. Much to my surprise, it seems that XDA-Devs has very little information regarding the HTC Herman variants (Sprint, Verizon, Alltel, etc.) since most of the development for the Raphael is being done for the GSM version only. There are a few scattered threads about this but I figured that a sticky (and a Wiki update) will not hurt the site and as an added bonus, it will help the noobs (and some Seniors too ).
I found most of this information in ppcgeeks.com, so feel free to lurk around that forum as well since it is packed with useful information.
Instructions are the same as with the GSM models, only inverted. In other words, [highlight]IF YOU FLASH THIS ON A NON-CDMA PHONE, YOU WILL BRICK IT. NO QUESTIONS ASKED.[/highlight]
I am not responsible if you brick, damage, or affect the functionality of your phone in any way, shape, or form. Do this under your own discretion...
And as usual, when in doubt...READ!!!!
Edit: You will need a software to unzip the files (Winzip, Winrar, 7-zip, etc). It has been reported that the Vista file decompressor (or something like that) will associate this package with Adobe reader, making it difficult to open it...
Edit 2: If you are flashing for MetroPCS, please follow this amazing guide that dreynam2 has put together!!!
Here goes:
Step 1: HardSPL Unlocking!
Again, all this information can be found in www.ppcgeeks.com (original thread here). I just wanted to make it available to people at this site. Thanks to cmonex and the full CDMA Raphael Elite Team!
UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)
CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!
SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!
there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).
1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.
2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.
3. 0.35 for Verizon touch pro's ONLY.
Important:
first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!
preparations before flash:
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).
instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.
[highlight]EDIT: I tried on multiple occasions to upload the Verizon unlocker to this thread, but the system keeps on refusing it again and again (main reason why I had a link to the original site). Go to the PPCGeeks site and get the unlocker from there (alternatively, this was provide by psouza. Thanks!)[/highlight]
Step 2: Choosing the ROM that Fits Your Style
Congratulations! If you are reading Step 2, that means that you successfully unlocked your phone (or are about to make a no-no). Make sure that your phone is HardSPL unlocked or else you will not be able to flash.
Taste is a matter of personal choice. As I stated in my previous post, most of the development for this phone is being done at PPCGeeks, and since posting every Rom thread in here would be time consuming (and possibly useless), I am giving you this link to all the custom ROMS.
Which one is best you ask? Again, a matter of personal choice. Some roms are feature packed, whereas others are light and fast. Really up to you...
Link to Roms
Step 3: Flashing Your New ROM!
Well, Step 3, that means that you chose a ROM and are ready to get down and dirty with your device (and about to kiss that ugly stock rom good bye). As with the flashing of any device, make sure that:
a. Your device has battery of 50% or more, else you might end up with a half flashed brick.
b. You have ActiveSync/Device Central in your PC.
c. That you read the steps below over and over and over again until you can repeat them in your sleep.
[highlight]Make sure to follow every single step down to the T. I cannot stress this enough.[/highlight]
How to Flash Via PC:
1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
If that fails please trying these directions (thanks sn0b0ard)
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Flash from microSD Card (Thanks to MadlyAlive):
1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.
Step 4: Tweaks, Tweaks, and Tweaks!! (Part 1)
Step 4!!! Wow, you must feel in cloud 9 right now! You successfully got rid of that stock rom (without making a $700 paperweight) and are ready to tweak your device to your own liking! Here are some tips and tweaks that I found over at PPCGeek (Original thread) Thanks Baffles!!
Note:Go to the original thread for all the cabs.
Tweaks and Fixes:
Basic:
If your device is showing you random issues, such as speaker/ear piece being crappy out of the box, do a hard reset. Some have reported this simple task has solved their problems. You can do this one of two ways: either select clear storage from the system tab in settings (Start->Settings), or power off the device, hold volume down and OK, and hit the power button.
If your data isn't working, try this.
Disable SMS Sent Notification: [HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settin gs] Set SMSNoSentMsg to 1
Install the Picture Mail enhancement from Sprint - run PIE, and click "Click here to check for new updates." (if you changed your homepage, go to Sprint PowerDeck from favorites) Then download and install the cab file listed. This will have to be done after every hard reset. Still seems picmail doesn't like to work right, though.
Phone:
Install new Audiopara for louder volume
Enable/Disable mute call when phone is flipped over - [HKEY_LOCAL_MACHINE\Software\HTC\PHONE] Set FaceDownMuteRing=1 to enable, or =0 to disable. Source
You can make your phone stop making noise when you enable/disable the radio. Edit [HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunction \CDMA\FlightModeOnOff] and change Sound_on and Sound_off to desired sound, or blank for no sound. source.
Issues with answering your phone when a data connection is open (answer buttons don't do anything)? Looks like a tweak messes up a registry key that affects this. [HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings], make sure SuspendResume is set to #777 (not anything containing GPRS). This issue seems to be related to Advanced Config. source
Added 1/7/09:
Enable wake up on SMS - you can do this via DiamondTweak (possibly advanced config too), or [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] DisableSMSWakeUpEvent=0 (to enable waking up). source
Set up Visual Voicemail on Sprint. More info here. THIS IS VERY YMMV.
Internet:
This hack no longer needed on the latest version of WMWifiRouter - Disable temperature sensing in WMWifiRouter to get it to allow you to connect. Options->Configuration->Battery->Next->Next->Next->Select "Disable temperature detection"->Next. There is a bug, at least in my version, that shows "Enable temperature detection twice" however selecting the second one disables it.
Hack Internet Sharing to work: [HKEY_LOCAL_MACHINE\Comm\InternetSharing] Delete Extension key, set/create MaxCMCon=0 (decimal). [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings] Set ForceCellConnection="Sprint" -- Cabified Version Here
Change "Reply All" in poutlook back to "Reply" - [HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement], set module to an empty string. TO revert, set module to "\\windows\\OutlookEnhancement.dll"
Information here on GeoTagging/Automatic uploading of photos using Shozu.
Change useragent in Opera Mobile to view full websites instead of mobile versions. Info here.
If you have issues with Gmail/IMAP and sending emails, Official fix here, or read this post
Make Pocket IE your default browser. How to here.
Skyfire now "works" on Touch Pro. It is not a real VGA version, just QVGA stretched up, so however crappy it may look it is the best flash solution for now.
New Opera Mobile from Touch HD here - May or may not perform better, some reports of issues/graphical glitches/etc.
Increase the maximum number of tabs in Opera - Close Opera and edit \Windows\Opera9\opera.ini and change the Max Allowed Tabs to the right number. thanks mclaser
Added 1/7/09:
Set Opera to be your default browser for all items. source
TouchFlo 3D / Manilla 3D
Add your city to the weather tab. Follow these directions making sure to use the modified copy of version 1.1 of the specified editor.
A better way - Install the cab from here and it will add all cities to the list for you, so you can just hit Add Location and find yours! Updated 1/8/09
Install flip clock if you want it. instructions here
Get some wallpapers
Wallpaper on every tab, transparent clocks and curtains. More info here
Optimize your music tab by removing the music store logo. Some Touch Pro specific directions.
Information on how to remove sprint Manila3D customizations and get an HTC Stock configuration here
Rename your tabs in Manilla3D. Tutorial and instructions here.
Remap Manilla3D to use Pocket Informant instead of the built in calendar. Complete information here
Increase TouchFlo's sensitivity, so you don't have to push as hard to scroll. [HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings] increase FingerPressure. Default is 16. I am having good luck on 128, I may raise it higher. Higher = more sensitive, lower = less sensitive.
Touch Pro Cleanup by GoodThings2Life - read this/download one of the cabs to automatically apply a specific set of tweaks/mods.
Action screen changes, customizable through registry edits. More here
Change the soft keys on the home screen. [HKEY_LOCAL_MACHINE\Software\HTC\Manila], change HomeLSKPath and HomeRSKPath. HomeLSKText/HomeRSKText = the text. More info here.
Added 1/7/09:
Change software used by some TF3D entries with SSMaPa - This can be a complicated procedure. source
Boost TF3D Performance - increase file system cache to 8MB, file system filter cache to 131072, FAT cachesize to 32768 (you can do this with advanced config). source
Discussion about scrolling/tweaking of scrolling here
Revive the tab change animations! info, and source
Other Theming Topics
Custom Start Icon/Battery/Speaker/EV/1X Icons - UPDATED 1/7/09
Step 4: Tweaks, Tweaks, and Tweaks (part 2)
Other
Get S2U2 to work: Make sure you install the VGA version, not the QVGA version. You can now use DirectDraw mode with the newer versions of S2U2. UPDATED 1/7/09
Get your battery icon with percentages here (old thread).
Battery/performance hacks if you're so inclined.
Turn it into your most expensive flashlight - Alternate program. Both work, nueLight v3.0 is what I personally use. UPDATED 1/7/09
Auto screen rotation with Gyrator 2, and Configure it to not rotate certain apps UPDATED 1/7/09
Fit more icons into your programs list with this tweak
If your text is too big, such as in text messaging, go to Start->Settings->System->Screen->Text Size and move the slider to the size of text you want. Alternatively, you can move your thumb in a circle around the OK button, similar to how you would use the click wheel on an ipod. This will adjust the font size too.
You can disable auto-wakeup when keyboard is opened.[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset. To revert, delete the key or set it's data to 1. Source
Get Old School word correction back (same as was on Mogul, etc) - Latest Cab here - Older Information:Updated information here and here.
Disable start-up sound / change it - [HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation] Rename both 'StartupGif' and 'StartupWav' to new values, or leave blank to disable. Source
Increase your screen's sensitivity. [HKEY_LOCAL_MACHINE\Drivers\TouchPanel] change PressureThreshold. Default is 37 Decimal, it is reported 240 decimal is a good new value for this. source
Added 1/7/09:
More Camera Modes! You can enable these in Diamond Tweak, there are options to enable Burst/Sport mode, videoshare mode, and increase resolution of sport/burst photos. source
Remove scrollbars: [HKEY_LOCAL_MACHINE\System\GWE] change cyHScr to 0 to disable horizontal, and cxVScr to 0 to disable vertical bars. source
Enable sound effects for keyboard open/close, info here. source
PST Tweaks:
First thing you must do is get your MSL. I wrote an app to make this very easy for you, more info on it here. If you have problems getting your MSL, put your phone in flight mode and try again.
You can tweak your Slot Cycle Index (SCI) to make your phone poll the tower more often. This makes your texts and phone calls come through quicker. This setting is a trade off between lag (most noticeable when receiving calls) and battery life. The default value on our phones is 2. Every step of 1 adds 1.28 seconds to the poll time, so at a value of 2 it is only polling every 5 seconds or so. Most people lower this to 1, so the phone polls every 2.5 seconds. This won't affect battery life much in areas of good coverage, but may impact it noticeably if you're in a poor reception area. Your Access Overload Class (ACCOLC) determines your phone's priority on the cell tower. The higher the number, the lower the priority. Do note that 0 and 1 are reserved for emergency service uses, so DO NOT use these. You can ACCOLC's of 2-9, default on Sprint should be the last digit of your phone number.
Now that I've laid down the basic groundwork of the two main mods, here's how to change them. Don't mess with settings in here unless you know exactly what you're doing, as phone performance and usability will be affected. To enter programming mode, open your phone screen and dial ##778# (may be ##778 on some devices, if that doesn't work, run EPST.exe from \Windows). Click edit, type in your MSL, and hit OK. Now choose View Info in the lower left corner, and hit NAM settings. On this page you can change your ACCOLC (remember, don't use 0 or 1). Now, switch to the Modem Settings page to change your SCI (default is 2, valid values are 0-7). Now accept the changes and soft reset, and you're updated!
More information can be found here
Useful Downloads:
DiamondTweak - some tweak options do not work.
Advanced Config - claims to be fully compatible UPDATED 1/7/09
Total Commander
PHM Regedit
TF3D Config [not fully compatible with TP yet] - more info here
i-nigma - read QR codes. Any Windows Mobile apps I release from now on will also have a QR code for quick and easy OTA installation.
BAF MSL Grabber - Get your MSL quickly and painlessly.
List As Editor - My little utility for editing the 'List As' property of a contact manually.
Touch Pro Cleanup by GoodThings2Life - Clean up the stock ROM easily
PocketToolman 2 - includes features such as disabling scripts in PIE and other OS tweaks/tools.
esmertec Java JBed - set up for 3D and VGA. More info here.
Radio Utilitues - scripts by GoodThings2Life to give you shortcuts to turn on/off BT and Wifi.
POP/IMAP Send Mail patch - Microsoft issued patch that fixes issues with sending mail.
SecondToday - gives you a second today screen to allow you to use other today screen items in tandem with TouchFlo 3D.
.NET 3.5 - also, if you need them, debugging messages for .NET 3.5.
[color]Added 1/7/09:[/color]
Some popularly requested cabs
Another list of useful apps
Large collection of apps - all indexed and in one bundle.
Custom ROMs and Tools, Low Level Stuff:
Hard-SPL thanks to Raphael Elite Team
HTC Debug Tools
Touch Pro Cleanup by GoodThings2Life
How to remap hardware buttons
Stock Roms for CDMA
ElectronicRice's kitchen
And of course, your custom ROMs can be found in the upgrade sub-forums. CDMA Upgrades and GSM Upgrades
Added 1/7/09:
ATI D3D Drivers - The jury is still out on if these really do anything. Some discussion here. source
Omnia D3D Drivers - See info on ATI drivers above.
Flashing Instructions
WM6.1 20931 Kitchen, CDMA, GSM
New Radios! CDMA and GSM.
SRS WOW Audio Drivers - Jury is out on this one too.
Hardware:
Video Cables:
Buy from Expansys
Build using pzztgotbagz method
PPCGeeks Alternate Method
XDA Method
Other:
Discussion of accessories/sites to purchase accessories.
Fix your noisy battery cover if yours makes noise. - here .... mirror here
Discussion and Indexing of Touch Pro build dates and issues. Another thread here
Discussion on battery charging and heat issues.
Added 1/7/09:
Dye your battery cover!
Step 5: The "OH SH*T!!" Step. Stock Roms
Well, if you are in Step 5, that means that you have to go back to Stock rom for whatever reason. Worry not, the roms are readily available. Just go to
http://forum.ppcgeeks.com/showthread.php?t=42741
Here you will find all your Stocks for most carriers.
If you have to Relock the phone for warranty purposes, just use the relocker in the first post. Now, there is a trick to use this thing. If you want to relock and just run the exe with the phone connected, you will get an error.
[highlight]Flash back to original Shipped Rom and Radio BEFORE Relocking!!!!![/highlight]
*First, put the device in bootloader mode (Hold Vol Down +Power +Reset until you see the bootloader screen (multicolored). It will say Security Unlocked and a bunch of other numbers including (and this is key) 0.37 Olinex (or Monx, I can't remember right now)
*Now, run the exe in your computer. This process takes about 1-2 minutes at the most. The phone will reset after its done.
*To check if it worked, wait until it finishes rebooting and go to bootloader once more. If done correctly, it will still say "Security Unlocked" but it will say 0.37.0000 instead of what I wrote earlier in this post. You should be goof to go from this point on.
Stuck. Thank you for collecting all of this information!
You are awesome, I have helped alot of new people who have flashed GSM ROM's to their CDMA devices and this will help out alot! Even though I have a GSM Fuze, please let me know if I can help you with this in any way. It has been discouraging to see how the new people who have mistakenly flashed the wrong ROM to their phones have been treated and I know alot about phones GSM and CDMA and am also a member of PPC Geeks and have been for some time (not much posting mostly reading) my name there is dashmaster1000. So if you would like some help or just want me to gather and compile information I am more than willing to help you! Again thank you!
Cal-El said:
You are awesome, I have helped alot of new people who have flashed GSM ROM's to their CDMA devices and this will help out alot! Even though I have a GSM Fuze, please let me know if I can help you with this in any way. It has been discouraging to see how the new people who have mistakenly flashed the wrong ROM to their phones have been treated and I know alot about phones GSM and CDMA and am also a member of PPC Geeks and have been for some time (not much posting mostly reading) my name there is dashmaster1000. So if you would like some help or just want me to gather and compile information I am more than willing to help you! Again thank you!
Click to expand...
Click to collapse
Thanks man! I have seen how you've helped people out (especially in the NRGZ roms since I am around there for the most part). I have asked NATF to cross post this sticky in the Raphael Rom Development as well, to prevent "accidents" from happening. In either case, if you do find some useful stuff that is not here, feel free to either pm me (I will update the posts) or simply add it to the thread yourself, whatever you prefer.
Once again, thanks for the praise
i need help. when i flash with the micro sd, all it does is take me to the tri-color screen that says "security unlocked" at the top
poisondminds said:
i need help. when i flash with the micro sd, all it does is take me to the tri-color screen that says "security unlocked" at the top
Click to expand...
Click to collapse
Is there any particular reason why you cannot flash via USB? I am only asking simply because it is a far easier process.
Just follow the instructions of Step 3 and you should be ok. One thing to mention, [highlight]do not let go of the VolDown and Power Button when you see the bootloader. You have to hold them down since it will go to a white screen with a set of instructions in blue right after that. It is the same process as with a Hard Reset.[/highlight] Make sure that you did the HardSPL prior to flashing a rom. Good luck!
Thanks!
I'm brand new. Just got my Touch Pro a few days ago and have been lurking around a few forums to get myself aquinted with the options available for custom ROMS and proggies. Thanks for this comprehensive guide for all of us newbies!!!!!
kstephens98 said:
I'm brand new. Just got my Touch Pro a few days ago and have been lurking around a few forums to get myself aquinted with the options available for custom ROMS and proggies. Thanks for this comprehensive guide for all of us newbies!!!!!
Click to expand...
Click to collapse
Not a prob. Enjoy!
Flashing Question
This may seem like a strange question but here goes...
I am considering flashing my Touch Pro and wonder if any one has tried doing it in Win XP Pro running under Parallels on a Mac? ActiveSync works fine so I know the communication between the two is fine. I really don't want to drag my old Win 2K machine out and upgrade the RAM and OS just to start playing around with different ROMs... but I don't want a $600 brick either.
Thanks to all in advance!
butchwhitt said:
This may seem like a strange question but here goes...
I am considering flashing my Touch Pro and wonder if any one has tried doing it in Win XP Pro running under Parallels on a Mac? ActiveSync works fine so I know the communication between the two is fine. I really don't want to drag my old Win 2K machine out and upgrade the RAM and OS just to start playing around with different ROMs... but I don't want a $600 brick either.
Thanks to all in advance!
Click to expand...
Click to collapse
It has been tested, and it works great.
On a side note, once you get HardSPL on the phone, I suggest flashing from your SD card directly. Not only does it eliminate the need for ActiveSync, but it is also 2-3 time faster.
total noob
HI every1.. total noob here..I am considering flashing my USCellular TP...
I understand USCC is CDMA? Does it matter which rom i use? Does the rom have to specify USCellular er what ..
im clueless thanks in advance
It should not matter as long as it is a CDMA rom. What makes it carrier specific are certain apps that come with the original. However, you may want to check with the cook, just to be on the safe side. Good luck!
Good ROM for Verizon TP
I have a Verizon Touch Pro and am thinking about flashing. I am curious what is a good rom that is out there. I love the TF3D so I want it included with the ROM. Aside from that I don't really have any preferences (Super fast would be a plus). Thanks for any advice.
xguerox said:
I have a Verizon Touch Pro and am thinking about flashing. I am curious what is a good rom that is out there. I love the TF3D so I want it included with the ROM. Aside from that I don't really have any preferences (Super fast would be a plus). Thanks for any advice.
Click to expand...
Click to collapse
Go to the link that I provided in Step 3 of my guide. Most of the available roms are in there. As far as which one is good, it really is a matter of personal taste. Mighty 4 (WM 6.1) is said to be one of the best and most stable ones out there. I used Fallen 2.1 and that was a pretty good rom. Very fast and relatively clean but with the app that you will want to have at one point or another. Good luck!
Finally also the Hurricane kitchen for OS Builder. You get WM6.0, WM6.1 (from Rose) and WM6.5 (from Captain/Maple) based XIP/SYS/package in the kitchen with the OEM parts from my batch-kitchen for Hurricane which was largely ported from the Tornado WM6 kitchen done by nitrogen.
You need OS Builder (see link above) and the archive from below link, then:
- Install OS Builder
- unpack the archive
- go to the relevant folder (WM60, WM61 or WM65)
- double-click on the file "OSBuilder.osb"
- push the green "play" button in the button bar -> see the build being created
- at the end you get OS.BIN along the OSBuilder.osb file
- upload this to your device via MTTY "l" (load) command
Mind that the MTTY can have 2 presets for the "load" command by pushing the "F" button in the toolbar. Set the "Download Command" to just "l" (the lowercase letter "L" without quotes) and select the "First time download file name" with the "..." button to the OS.BIN that you have created. So instead of typing (no quotes): "l my-path\os.bin" in the MTTY window, just push the Button "1" aside the "F" button. In case not present enter for the "mask ROM start address" just 00000000.
Kitchen is located here:
http://www.mediafire.com/?h6d6e1wslcsdk <- click me
If you have a shipped ROM still on your Hurricane, some more steps have to be done. The relevant tools are in the \tools folder of the packages. Follow the sequence in the folder "tobbbie-prepare-flashing-(one-time-per-device)". I had started to link that to the OSB Tools menu as well but this is not complete.
tobbbie, tnx for the kitchen!
Does backlight driver work good on wm 6.5?
Thanks!
Backlight works as it should - no difference between builds. Mind that the backlight has some quirks on the Hurricane. Some settings are useless (set to 'ff) and sometimes (within the settings menu, I think) keypress seems not to reset the backlight count-down, nothing severe though.
Compared to my batch kitchen here all the UPX-ed stuff is removed as it eats much more RAM per UPX-ed program. Mind that the use of the paging pool is not commonly understood. In short:
all exe/dll code is running within the paging-pool RAM space if possible.
if parts of the code are not accessed, the oldest code copy is discarded in the paging pool if new code needs to run
if the code is accessed again, it is loaded back from ROM to paging pool RAM and executes from there
So small paging pool -> slow device: the OS is busy swapping code in/out
UPX-ed exe/dll cannot load parts of the code from ROM as only the whole file can be read and decompressed to RAM. So if such code is run, it reserves the whole required RAM for its code, however outside the paging pool.
Better is that not UPX-ed run inside the paging-pool RAM and eat nothing extra for code space and well co-exist with other programs depending on their execution needs.
SDHC on Hurricane (and Typhoon)
20121003 Update (since no new posts allowed anymore):
Just to let you know: The SDHC lets the device also read FAT32 formatted SDXC cards (e.g.64 GB). It even reads more than one partition (I have 2 on my Android) and mounts both of them (32k Cluster size used).
Not sure how well the performance will be when managing data there - but reading a large music collection should be ok
More good news:
It seems that the SDHC support from Tornado also works on the Hurricane (even the Typhoon!). By replacing the drivers and related entries in the .rgu, the device still boots and gets access to an SDHC card (4GB, 8GB). Export via WM5torage works as well and chkdsk does not report problems for a 5GB full 8GB card.
It may still require some more testing - but finally all that I wanted to have on these devices is finally there
Will post the updates soon (just a few KB) -> DONE, advice included in ZIP.
This probably could even be done via a CAB file - but I will not check this.
tobbbie said:
More good news:
It seems that the SDHC support from Tornado also works on the Hurricane (even the Typhoon!). By replacing the drivers and related entries in the .rgu, the device still boots and gets access to an SDHC card (4GB, 8GB). Export via WM5torage works as well and chkdsk does not report problems for a 5GB full 8GB card.
It may still require some more testing - but finally all that I wanted to have on these devices is finally there
Will post the updates soon (just a few KB) -> DONE, advice included in ZIP.
This probably could even be done via a CAB file - but I will not check this.
Click to expand...
Click to collapse
Thank you!It's great news!I post it on wce.by and 4pda.ru!
sniper304 said:
Thank you!It's great news!I post it on wce.by and 4pda.ru!
Click to expand...
Click to collapse
Just go ahead, I hope there is a larger community than here at xda-developers. I feel lonely with my addiction to candy-bar smartphones
Everyone so proud of carrying a large touch brick in their pockets, sigh.
You should try out yourself first though before posting further.
tobbbie, i lost my mobile phone =(((
tobbbie
Thank you for your phone HTC Hurricane (since I lost my!)
Today finished russification your kitchen based on the OS Builder - for htc hurricane!
Russification about 99%. =)
All files sorted!
All ROM's checked-all works great!
here is link http://www.mediafire.com/?dpdx3zmvbaxn3mi
Thank you tobbbie!!!
P.S. WOW, I forgot to say that now cab files are not deleted after installation!