I just bought a refurbished S310 (Oxygen) from expansys : brand new, no sim lock, WM5, 80 €.
I can use it with any SIM, but it is app locked : I can't install some softwares (Office for example), and I can't update it to another ROM (6.0 or 6.1).
I tried various methods to unlock it, without success :
- manual edit of the registry with PHM registry (HKLM\security\policies\policies\1000001 etc..) : Can't modify the value.
- Security app from ORANGE (even if the phone doesn' come from ORANGE) to change the level of security : they sent me an app with the right IMEI, but I receive a "can't be used on this device" when I use it.
- Google to find other methods, without luck.
Do you think that the 20£ asked by http://www.imei-check.co.uk could be a solution to my problem ?
Any other advice ?
Many thanks in advance
You must first "unlock" you SPL (remove cid lock) , in this thread http://forum.xda-developers.com/showthread.php?t=340283 you have the instruction . After that you can put any ROM (wm5 ,wm6 wm6.1) you like. If your phone is SIM unlocked then you dont need http://www.imei-check.co.uk
esgts said:
You must first "unlock" you SPL (remove cid lock) , in this thread http://forum.xda-developers.com/showthread.php?t=340283 you have the instruction . After that you can put any ROM (wm5 ,wm6 wm6.1) you like. If your phone is SIM unlocked then you dont need http://www.imei-check.co.uk
Click to expand...
Click to collapse
Thanks, I forgot one step in this process.
It's OK now.
Related
I've just received an XDA2 that is locked to the O2 network.
I need to use a UK Vodaphone PAYG Sim in the XDA.
I've run xda2unlock but it tells me that the phone is allready unlocked.
Except, when I use my Voda sim the XDA still wants me to input a code into the SIMlock box!
Any ideas as to what the problem could be?
what do you mean ?
when you softreset your device and it want a code to do anything but
call alarm and such ?
because thats not a simlock code thats just the sim code
You probably followed the xda2unlock link from the front page of www.xda-developers.com into the wiki pages. In the wiki there is still the old version 1.2 of the tool, which doesn't seem to work on Radio 1.10 or so. At least on my UK O2 XDA2 I had the same behaviour as you described.
The good news is: there is a new version that does indeed work (at least, for me it did). Please go to http://forum.xda-developers.com/viewtopic.php?t=6963 where you will find version 2.2 of the xda2unlock tool. This is a program that runs on the PDA itself. It does not require the hard reset or the bootloader mode.
Hope this helps ... Kai
PS: I have updated the 2 wiki pages, to include links to version 2.2, too.
I bought the m600 two weeks ago and read about the unlocking in the Wiki. I folowed the steps but it seems that after executing lokiwizMSL.bat and pressing enter to start it lokiwiz can't find my mobile phone, it says: cant find path. While it was connected with activesync. after this it says its unlocked, but i cant find the code anywhere
Does anybody knows what I could have done wrong?
I really need to Sim unlock the phone because it can't read my other non-orange Simcard
thanks in advance!
hi again.
I tried to unlock the Prophet again, for some times. I Copied the cab's from the Utils folder in the Lokiwiz03a.zip file to my Prophet and executed them.
(The two files : "Cert_SPCS.cab" and "EnableRapi.cab")
But I keep receiving the message ".....kan opgegeven pad niet vinden" (cant find path)
Please help me
What is the path that the Lokmiwiz is searching for, and why doesnt it sees that I'm connected via ActiveSync, which I was?
thanks in advance!
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
try with aWizard
Unlocking my SPV M600 from Orange
Hi. I'm from Argentina and travel a lot because I guide motorcycle tours in South America. I use different cell phones all over south america.
I mainly use my SP in Argentina (CTI Movil)
My girlfriend bought me (yes you can say I'm a lucky guy ) this beautiful M600 in France with Mobicart. I tried to unlocked it usind the lokiwizMSL 0.3 but did not work. The message was that the path was not found.
I installed the cabs in the PDA and this erased the picture in the desktop.
After that I ran again de lokiwiz, and had the same answer. The path is not found and did not deliver the precious code. The PDA was connected at all times. It also says that ECHO is disconnected. I have no idea what ECHO is (sorry )
Do we still have to wait for a new version of the loki software? Is there any other way? Can you help this southern beginner?????
I can say that my SPV is a G4, bought last Dec.
Hey, this is a great place and I kinda like the community.
Saludos!!
SPV M600-G4 Desimlock Ok
Hi guys,
I've just unlocked my M600 ORANGE.
I used lokiwizMSL 0.3 on my desktop PC (ACTIVESYNC V 4.5)... That does not worked... I used lokiwizMSL 0.3 in my notebook (ACTIVESYNC V4.2) and It woked very well : I've got the precious number !
Know I put my SFR sim into it... That's OK
So... If your PC says "path is not found" try to unlock your M600 into an other PC !!!
animelover said:
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
Click to expand...
Click to collapse
G4 = "Disk On Chip" is a other Version.
G4 unlock with Lokiwiz: Activesync 4.2
I have Prophet G4 and unlocked with the Lokiwiz software (I don't know which version anymore, I unlocked ± 1 year ago).
I used Activesync 4.2, definitely not 4.5
Good chance that M$ added (bij accident of course) a minor surprise in their latest Activesync version.
4.2 can be downloaded on several places, f.i. here
http://www.techspot.com/downloads/2480-microsoft-activesync.html
Good luck.
I've just used Lokiwiz03a to unlock an m600 g4 with no problem whatsover over activesync 4.5
Unlock S200. All Ok !!!!!
Hello
If somebody need to unlock a Qtek S200 G4 use the next link:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
It's easy and ok!!!
Tanks to wrigth this guide !!!
do you CID unlock or SIM :->
can sombody post me a link please how to CID unlock a G4 Model?cause wizloki is just for sim or?thx
More problems with my SPV M600
Someone has given me a PDA (SPV M600 or Qtek S200) but he tried to upgrade it to wm6. Unfortunately he doesn't know everything about it because this PDA is 4G and he tried the sequence as the PDA was 3G.
The thing is, in the middle of the process the machine starts to run but it is blocked and the screen shows:
Orange:
IPL 2.21.0001
SPL 2.21.0001
GSM 0.2.19.21
OS 1.0.13.21
After do a hard reset the message is always the same. I can't do anything!!
What could I do?
Thanks
lokiwiz03a worked for me Now I can use any SIM...
If anyone is interested, I used activesync 4.1, the disk came with my SPV.
I must be thick as I have read more posts on this than I have had hot dinners and tried various utilities all to no avail although thankfully my Wizard still seems to work.
My O2 XDA-Mini s is about 2 years old and of course locked to O2 although the device come up as SIM Unlocked but CID Locked.
IPL - 2.21.0001
SPL - 2.21.0001
I am now on the Three network and would just like to get back to using the phone I love rather than the freebie I have now, so I am assuming I need to get CID Unlocked?
Having bothered to get to that stage I would want to scrap the O2 software and upgrade to a better ROM.
Sorry for being so stupid on this, I am hoping someone in the know can take the time to reply.
Thanks in advance
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
CID is only used for flashing, so if you want to upgrade to the better WM6 roms now available, you'd have to unlock it permanently (hard SPL) or use the Soft SPL.
Good luck,
EquinoXe
the-equinoxe said:
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
EquinoXe
Click to expand...
Click to collapse
Thanks for taking time to reply EquinoXe, you have confirmed what I had already thought.
The device reports "Invalid or missing SIM card" with the Three SIM card and WST v4.2.2 reports "Your phone is already SIM unlocked" ??
I do wan't to upgrade the ROM but more importantly I want to get the thing working with the Three SIM card, then I can worry about the ROM.
Any other suggestions will be gladly received.
Thanks in Advance
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
ashasaur said:
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
Click to expand...
Click to collapse
I have done this twice just recently but my G4 is not asking me to enter any unlock code. I read other threads where people had similar problems so tried a few times, device still comes up "Invalid or missing SIM card"
I ran EnableRapi from the device before running the batch file so I'm not sure what is going on or if it is something quirky about the G4 device??
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jackson>cd\
C:\>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ¨~äe├ÇÔ►-┴«p¦╚.;
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Strange, according to lokiwiz (and WST) you are sim- unlocked.
But clearly your three sim card won't be accepted.
I do remember that HTC had been messing with the bootloaders, had to downgrade one in order to unlock it too..
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
Just ignore the carrier ROMs, and only update (downgrade) the IPL/SPL with one attached to djharvey's thread (preferably the orange, because that one worked for me).
Flashing bootloaders can damage your device beyond repair, please use this method only if you are shure about the process, and know what you are doing. I am not responseble or liable for any damages.
Flash the IPL/SPL (takes a minute), then try again to unlock the phone.
Note: WM6.x needs IPL/SPL 2.19.xxxxx at least (works great with a 2.19), so if you have downgraded to a lower number, you'd have to upgrade again in order to run WM6.x .
Good luck,
EquinoXe
Same Problem
I have the same problem as the previous post. I downgraded from WM6.1 to a WM5.1 ROM and then ran lokiwiz - success!
I have now gone back to the original WM6.1 ROM and again I am locked out from my o2 SIM.
I am using: WM6.1 ROM Prophet My Green Edition http://forum.xda-developers.com/showthread.php?p=2116170
Any suggestions?
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.47.21
OS 5.2.19.209
the-equinoxe said:
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
EquinoXe
Click to expand...
Click to collapse
Thanks EquinoXe, I am going to try a T-Mobile, Vodaphone and Orange SIM later to see what results then maybe tomorrow try your last suggestion.
Thanks and I will post any results, hopefully not a flashy paperweight (~:
------------------------------
I have now tried T-Mobile, Vodaphone and Orange SIM cards in the Wizard and all work OK so unlocking was never the problem, obviously O2 is OK also as this was it's original branding.
So the problem is only with the Three SIM, I have an old T610 and T630 which I just put the Three SIM into with the same results.
Need to do a bit more reading on this but I thought this sort of restrictive trading practice went out with the monopolies issues, as it seems at the end of my contract it's not just a matter of me buying a phone of my choice, if I want a new handset I have to go with Three, who interestingly don't do XDA style phones, or change contracts.
More if it happens.
I'm guessing that the reason the 3 sim card won't work is because the Mini S isn't a 3G capable device - 3 is the only network in the UK that's 3G exclusive, hense why other (T-mobile, Vodafone, O2 and Orange) sims will work and the 3 sim card won't.
Hope this helps.
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
cnsathya said:
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
Click to expand...
Click to collapse
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
pof said:
..It can be used in all HTC Hermes devices, no matter which bootloader version the device is running.
NOTE: For x01ht post April devices, see this thread....
Click to expand...
Click to collapse
pof said:
...This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it.
Click to expand...
Click to collapse
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
But you can do it with IMEI Check, you just cannot change radio version afterwards, but on newer version of X01HT it's 1.46 radio, so it's quite ok I think.
mrvanx said:
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
Click to expand...
Click to collapse
So if i upgrade to the latest radio rom,it still can't be solved??
how about if we change the EXtRom?
Success
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
hi... Learning.....
may i ask what ur x01ht was?
is it before april or post april?
I have this message coming up on a Japanese language version X01HT. I don't think it's been unlocked. Will these instructions work on my phone?
EDIT: I followed the instructions above on my phone, and they worked perfect!!! Thanks!
how can I tell if my phone is "post april"?
USIM Message GONE!!!!
Hello cnsathya,
Not sure if you still have the problem. I just got my x01ht Hermes yesterday and I worked on it today to unlock it. I used pof's (THANK YOU SOOOO MUCH) unlocker v3 but still USIM showed then later put my t-mobile sim and re-ran the unlock software but after 10 sec I still got the USIM message. I moved SB_USIM.cab to the phone and ran it before the USIM message came but nothing seemed to change. But I could then use my sim and receive calls so I flashed the PIMPING IS BACK v3 ROM by jasjammin and it now works perfectly and no more USIM. I had an old x01ht but cracked the screen so bought this one. Let me know if you need more information or have questions. Thank You,
Pr4tik
learnig said:
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
Click to expand...
Click to collapse
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Is it ?
http://rapidshare.com/files/17336753/JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
It was listed here http://mobi.pdafans.com/viewthread.php?tid=275408&extra=page=3&filter=type&typeid=178
bayupraya said:
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Click to expand...
Click to collapse
This is a very old thread and I beg your pardon for bumping it, but I am looking for a thread which can help me solve my problem for like 15 hours now and this is the closest answer I got. My issue is similar to this, only mine is X05ht or the Touch Pro device. Similar Softbank carrier and yes similar USIM message issue.
Anyone can help me point to the right direction of solving my issue like the threadmaker solved hers/his on this thread? Please?
HTC xo1ht
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
hi respected members and mods
i am having problem in htc niki i have done hard spl as described in sticky thread of htc security unlock and then ran the step 1 it went successfull but step 2 is not working for me when first step completes phone goes off an comes back on and it says in sticky thread that we have to put phone in boot mode so i manually put the phone in boot mode and disable usb in active snyc settings and then i ran the 2nd step but it stucks i can see only 2 lines written
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
and after this nothing happens i press enter to exit from application but it doesnt go off i am not able to exit then i manually clicked on cross sign on right top corner to cancle the app and then i re flashed the orignal radio but phone still locked any help please i have done 2 to 3 times but not luck
befor you try to unlock ... flash a old 1.58 radio!
NetrunnerAT said:
befor you try to unlock ... flash a old 1.58 radio!
Click to expand...
Click to collapse
thanks for your reply do i have to flash the 1.58 radio after step 1 or when plz?
phone's orignal radio is this R 1.58.16.27 which radio should i write
im having this problem and now my phones prompting for an unlock code
stasis-666 said:
im having this problem and now my phones prompting for an unlock code
Click to expand...
Click to collapse
Unlock code? I assume that wiuld be to unlock your SIM.
Please note, you have to remove both SIM and SD card for the unlocking procedure.
I have HardSPL and flashed a british NIKI under "Orange" and was able to use it in the US with a US Sim card under T-Mobile.
I just tried to use it with a French SIM card under SFR and I get a
"SIM Lock" - Enter unlock code Message...
Is there a solution without calling the original carrier?