m new in this . . . .
downloaded black satin n spl update files
nw da files dont run
it says failed to initialize error code. . . . .
can anyone help me
i have imate jasjam runing wm 5
also give link to the latest spl version file
above 2.10 oli
cause m not sure which version i downloaded. . .
what spl do you have at the moment
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
that page should tell you about puttin hard spl v7 on your hermes and has guides for other things on aswell
good luck
i also read this
i gt 1.somerhing
when trying tp update spl..... it gives 262 error
when directly updating rom it gives 260 error
hlp
Read post #1160 on page 116(?) of this thread - http://forum.xda-developers.com/showthread.php?t=296722
It shows how to flash Hard SPL without pc using the sd card...
Cheers...
Related
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
Hi,
My herm 200 ,swisscom, has IPL1.01 and SPL 1.4Olipro. But always when I try to install Hardspl v7 it give me error 262 and only 0%.
Can someoone help me what to do because I want to flash new rom and new radio rom trough my SD card.
Thnx
i would suggest reading this wiki page which might help you with that error. A recent thread that had a error with flashing hard spl here may help you although it is for a different error, you may still get some ideas on how to fix it.
Hope this helps and Good luck
I did read everything but with no success. always error 262. I have Win XP SP3 with framework 3.5 but I dont think that would be a problem for this error.
Have you tried putting the Free HTC Hermes SIM & CID unlocker on your hermes as this may be the problem or have you tried flashing it using the sd card method.
Go to page 116, post 1160 of this thread - http://forum.xda-developers.com/showthread.php?t=296722 . It will tell you how and supply ALL the apps so you can use the sd card... Easier and safer...
Cheers...
is it the same procedure to put a new OS Rom through the SD card? After flashing to Hardspl v7.
P.S. it is super CID because I checked with mtty.
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse
Problem with SPL
--------------------------------------------------------------------------------
Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
__________________
Need of You
plz dont waste threads...
hi all
i try to Upgrade my gene to official ROM but this installed to 2% and restart then
my gene showing
3 Color screen
and this msg
ONBL...............
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
And in the white band RE-FORMATTING OK!
pls help me to fix it
also i try to install other ROMs but they all not work .
up
light25360 said:
hi all
i try to Upgrade my gene to official ROM but this installed to 2% and restart then
my gene showing
3 Color screen
and this msg
ONBL...............
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
And in the white band RE-FORMATTING OK!
pls help me to fix it
also i try to install other ROMs but they all not work .
Click to expand...
Click to collapse
Any official ROM can not be flashed directly you must go through this process
http://forum.xda-developers.com/showthread.php?t=506467
You must remove spl.nb,gsm.nb and other .nb files but not os.nb because they will mess up with your device's spl and bricks it.
Since you have already flashed this ROM, unfortunately you've bricked your device.......
So, i would suggest you to patch your SPL via this guide http://forum.xda-developers.com/showthread.php?t=472169 and then try to flash custom made ROMs.
Other way is to remove that bad flashed spl.nb file but don't know the method to do it....
I have always used the Orefkov method for flash it but This time my downloaded ROM was a Installation file and i dont use orefkov method just Got connected to usb and run this file but after 2% my gene restarted and Revealed this msg :
ONBL
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
RE-FORMATTING OK!
I also downloaded this ROM from shiped ROm site
How can I repair this
pls help me bro
light25360 said:
I have always used the Orefkov method for flash it but This time my downloaded ROM was a Installation file and i dont use orefkov method just Got connected to usb and run this file but after 2% my gene restarted and Revealed this msg :
ONBL
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
RE-FORMATTING OK!
I also downloaded this ROM from shiped ROm site
How can I repair this
pls help me bro
Click to expand...
Click to collapse
I don't know what to do now.....
But what about this??
GENE J-TAG Restore
ok I did not try JTAG Method but tnx for your help dear mr.harsh .
I would try this method and I will say results in this thread
also sry for my bad eng