so i love internet connection sharing, but i was wondering if theres a way for me to share my connection with other computers.
basically, i have my phone sharing internet via bluetooth to my laptop, and want to share the internet, preferably over wifi to someone else with a laptop.
how would i do this?
thanks
lol wmwifirouter...
gc14 said:
lol wmwifirouter...
Click to expand...
Click to collapse
Any way to encrypt signal (even really simply)?
I know when I go to this convention next week all the bored people are going to steal my bandwidth (VZW dialup is not fast enough for anyone but me).
I am pretty sure there was a way to configure WEP, tho I have only gotten WMWifiRouter to work one time. And it was because there were no other AP's in the area. For some reason if I am in an area where there is an AP but it's secured, my phone keeps prompting me to connect to it, and if I dismiss the message, it never properly initializes where any other device can connect to it.
No errors show up on the screen, it just doesn't show up as an available wireless AdHoc network. I've tried running the latest trial version, and the version that is in DCD's kitchen, same problem on both.
Maybe I'm just not smart enough to figure it out, or maybe my brother's PDA and my Ipod just aren't compatible with it. I got it to work 1 time, and it was with my laptop.
BTC
serfboreds said:
Any way to encrypt signal (even really simply)?
I know when I go to this convention next week all the bored people are going to steal my bandwidth (VZW dialup is not fast enough for anyone but me).
Click to expand...
Click to collapse
gc14 said:
lol wmwifirouter...
Click to expand...
Click to collapse
i thought of that too, but will it let me connect more than one computer to it at a time?
plus ive heard issues about overheating when used for a while.
thoughts?
thanks
Related
So I just went from stock radio and rom (VZW) to radio 3.42.30 first and then dcd's latest rom.
Did the *228 update, yada yada - made a phone call and connected to the internet with no problem
From reading many posts, how-tos, etc, I was under the impression that the a-key would be wiped out.
VZW boot screen shows the correct new versions, custom rom is installed, yada yada
is this normal?
BTW - how can I test to see if Rev-A is working?
i have never had to get a new a-key.....I have flased uuummmm 5 times i think
deeznuts2 said:
BTW - how can I test to see if Rev-A is working?
Click to expand...
Click to collapse
to test, you must tether to a laptop,
open the commanager, then select internet connection sharing.
connect to the internet on your computer and go to a test like speedtest.net
i wish i had the data plan so i could use the rev A lol the wife put her foot down on my $150 phone bill lol
gbenj said:
to test, you must tether to a laptop,
open the commanager, then select internet connection sharing.
connect to the internet on your computer and go to a test like speedtest.net
Click to expand...
Click to collapse
problem is that I dont get EVDO service in my home, at least not very well. Got to climb the walls a bit to get even one bar.
Was wondering if there was something I could check on the phone itself, without tethering.
If not, I'll have to try it tomorrow when I can take my laptop elsewhere
gbenj said:
to test, you must tether to a laptop,
open the commanager, then select internet connection sharing.
connect to the internet on your computer and go to a test like speedtest.net
Click to expand...
Click to collapse
no you don't
you can use a site like DSLReports to do a speedtest in PocketIE
Try: http://www.dslreports.com/mspeed?jisok=1&more=1
scrawnyb said:
no you don't
you can use a site like DSLReports to do a speedtest in PocketIE
Try: http://www.dslreports.com/mspeed?jisok=1&more=1
Click to expand...
Click to collapse
perfect! exactly what I was looking for. Thanx!
I have flashed many, many, many times and never needed to reset akey (just lucky I guess).
Other than speed, as these guys show, there is no actual way to tell. If you are in an area that has it, and you installed everything ok you should be getting it.
I've reset the A-KEY.........Just call verizon and tell them you were having a problem and reset your phone and tell them you have seen this problem before and they WILL NOT give you any problem issuing a new A-KEY as long as you seem to know what you are talking about!!
scrawnyb said:
no you don't
you can use a site like DSLReports to do a speedtest in PocketIE
Try: http://www.dslreports.com/mspeed?jisok=1&more=1
Click to expand...
Click to collapse
not exactly...while that will give you a speed reading, it wont be really accurate, cause your phone both needs to download the data and process it, the device needing to process it might give you slower than normal results.
when you tether with a laptop, the phone is just downloading the data, computer does all the work processing, which it doesnt slow down, (unless you have a computer with specs close to your phone...)
as far as i know, thats the way it is...and why i always tether to test the speed.
also, if you do use it on your phone, be sure not to use something like opera mini or something like that, because that will give you the speed of the opera server, not your connection to the internet...
good luck
gbenj said:
not exactly...while that will give you a speed reading, it wont be really accurate, cause your phone both needs to download the data and process it, the device needing to process it might give you slower than normal results.
when you tether with a laptop, the phone is just downloading the data, computer does all the work processing, which it doesnt slow down, (unless you have a computer with specs close to your phone...)
as far as i know, thats the way it is...and why i always tether to test the speed.
also, if you do use it on your phone, be sure not to use something like opera mini or something like that, because that will give you the speed of the opera server, not your connection to the internet...
good luck
Click to expand...
Click to collapse
Well I think its working - when I got to work today I gave dslreports mobile a try....have 3 EVDO bars. Tested a 400k file....results: over 600kbps
try this site designed for mobile phones....
http://mobilespeedtest.com
Should give you a reading... I get up to 2.3 mbit..... average is 1.6.....
Did the same thing with my newly, recycled, replacement phone. And strangely enough, I didn't wipe the A-key like I did with my original. Weird, but counting my lucky stars.
Having some issues with slow detect of towers at my work desk - signal has been usually week - but found. Have done the EPST M.IP change/update thing - but the jury is still out as to if that has helped? Had similar issue with last phone. Probably not related so I just digress.
Thanks for the mobile speed ck links...
Speedtest doesn't even finish while I'm at my desk. Nice...
Desktop comes back at over 5.5kbs (FIOS).
Guess I'll have to try it else where. Nice testament to my connectivity to the towers while at work, huh. Can't win 'em all I suppose. At least the rest of the upgrade has gone well.
I've been using USB Modem with my Sprint Touch Pro for the last week and I'm having a major problem with it.
When uploading images via FTP, after one or two jpg files are uploaded, the upstream speed diminishes to almost nothing. It does this every time without fail.
The workaround is just disconnecting and reconnecting, but that's a pain.
Anyone else having this problem? It seems like it's some sort of switch being tripped in the phone or by Sprint when it sees that a large amount of data is being uploaded...just a guess though.
steiny said:
I've been using USB Modem with my Sprint Touch Pro for the last week and I'm having a major problem with it.
When uploading images via FTP, after one or two jpg files are uploaded, the upstream speed diminishes to almost nothing. It does this every time without fail.
The workaround is just disconnecting and reconnecting, but that's a pain.
Anyone else having this problem? It seems like it's some sort of switch being tripped in the phone or by Sprint when it sees that a large amount of data is being uploaded...just a guess though.
Click to expand...
Click to collapse
Hi,
Strange problem, I don't know if this will solve your problem.
But you should definately try a programm called "wmrouter" (google...)
This will turn your TP in a wireless router, which is really easy to use.
greetings,
Wout
have you tried the registry hacks for tethering? there's a cab if you don't want to do it yourself, but perhaps it'll fix your problem. You can do a search on here or go here for other touch pro essentials as well: http://forum.ppcgeeks.com/showthread.php?t=42730
The edits are under "internet" on there. goodluck.
wout said:
Hi,
Strange problem, I don't know if this will solve your problem.
But you should definately try a programm called "wmrouter" (google...)
This will turn your TP in a wireless router, which is really easy to use.
greetings,
Wout
Click to expand...
Click to collapse
he's right. that app is great and also lets you connect your cpu wirelessly. only problem is that it drains your phone faster cause it uses wifi. but you won't have disconnections... you could try the registry hacks thread on that link i gave you first and if that doesn't work you should pay for wifi router or pdanet.
hey if you resolve this issue please update us on how u did it.. thanks
Wow, thanks for the help guys. Problem solved.
First off, USB Modem simply doesn't work right on the Touch Pro, so I'm uninstalling it. With the pre-installed Internet Sharing software, there's no need for USB Modem anyway and it cuts out the old step of having to dial #777 to connect.
Thanks for the suggestion Unflushablelog. I downloaded and installed the Internet Sharing tethering hack cab file, fired up Internet sharing and blam, full Rev A speed and no diminished upload speed and best of all, no #777 dial up. Awesome. Better solution than I could have hoped for.
As for WMWifiRouter, I'm sure that would work too but I prefer the USB tether.
Unflushablelog said:
he's right. that app is great and also lets you connect your cpu wirelessly. only problem is that it drains your phone faster cause it uses wifi. but you won't have disconnections... you could try the registry hacks thread on that link i gave you first and if that doesn't work you should pay for wifi router or pdanet.
Click to expand...
Click to collapse
I just bought a touch pro and im waiting for sprint to ship it, i got the everything plus plan will sprint slap me with a huge bill for tethering?
benitojuarez said:
I just bought a touch pro and im waiting for sprint to ship it, i got the everything plus plan will sprint slap me with a huge bill for tethering?
Click to expand...
Click to collapse
i think only the phone as a modem add on to the plan covers tethering... but that's why people use that registry fix... to make sure it uses the sprint line (which is what simply everything uses - regular unlimited data). we should be getting billed for it, but we don't. just try not to spend a lot of time tethering and you'll be fine (basically you don't want to raise any flags by having abnormal data charges on your account cause then sprint might look into it)... people have been doing this for years and that's always their recommendation.. i've never heard anyone say don't do it. it's something that sprint tries to capitalize on by selling an unnecessary extra when it should be free, whether you have the simply everything plan or just the regular power vision with internet
Unflushable could you provide some more info about this reg fix please?
The registry fix is here: http://pocketpc-live.com/top-stories/the-remote-party-has-ended-this-connection.html
Regards,
Carty..
Carty said:
The registry fix is here: http://pocketpc-live.com/top-stories/the-remote-party-has-ended-this-connection.html
Regards,
Carty..
Click to expand...
Click to collapse
Thank you!
I've never used or had a reason to use a proxy server before, but it's pretty easy. I was Googling around for a solution to my tethering problems both with wired and wireless, the 3G eventually - most times sooner rather than later - goes in and out until you stop tethering and usually requires a reboot.
I found Proxoid. Just follow that link and you'll see instructions for use with different operating systems. This is not the only thread on XDA about this, but I didn't find it through XDA to begin with, and as far as I see, there's no thread about it in the Eris-specific section, and I know others with the Eris have been having trouble tethering and this solution might help them.
Proxoid has never once exhibited the same symptom with the 3G going in and out. I've only once had to stop and restart the Proxoid tethering on the phone, and that's all that was necessary, no reboot. I have had to re-run the "start-tunnel.bat" that comes in the Proxoid Windows download, which only has the files necessary so that you don't have to download the full Android SDK if you don't want to. There's nothing to install. The .bat files just runs an ADB command to let you use your phone as a proxy server.
Maybe Verizon can't detect the tethering this way, or whatever is going on. I did change one setting in the Proxoid app, and that's the User-Agent Filter, which I set to "Don't change".
This method has certainly been more reliable and less time-consuming than using the Wired and Wireless Tethering for root apps, or any other method I've tried (build in Froyo tethering, PDANet, et cetera).
I haven't confirmed it, but you *may* need to keep the screen on (Some ROMs you can set Android to keep the screen on while charging) or it may stop working. If someone else confirms this, please reply here.
I hope this helps someone.
Awesome...I'll definitely be giving this a try tonight!!! Thanks!
Good deal, I hope as with me that it works better for you than the normal tethering. Feel free to post your experiences here so anyone else can know if you like it better or not.
I will also try this out. My computer often doesn't see my wireless tether and I've never managed to get wired tether to work. Thanks for the heads up.
Sent from my Tazz Vanilla
Zalatorisaurus said:
I will also try this out. My computer often doesn't see my wireless tether and I've never managed to get wired tether to work. Thanks for the heads up.
Sent from my Tazz Vanilla
Click to expand...
Click to collapse
Please let me know how it works for you.
roirraW "edor" ehT said:
Please let me know how it works for you.
Click to expand...
Click to collapse
Will do.
Sent from my Tazz Vanilla
Thanks for the suggestion!! Once I figured out the process, I was able to whip right through a youtube video without a hitch...something that is extremely rare via standard tethering methods.
The only problem I have is that I need my phone sitting up on a window sill for adequate signal...so time to invest in one of three things: an ultra-long USB cable, a signal amplifier/repeater, or just a new phone that actually WORKS with wireless tethering.
Thanks again!
KaceMN said:
Thanks for the suggestion!! Once I figured out the process, I was able to whip right through a youtube video without a hitch...something that is extremely rare via standard tethering methods.
The only problem I have is that I need my phone sitting up on a window sill for adequate signal...so time to invest in one of three things: an ultra-long USB cable, a signal amplifier/repeater, or just a new phone that actually WORKS with wireless tethering.
Thanks again!
Click to expand...
Click to collapse
Glad to help! Give the author of Proxoid some props if you can. Glad it's helped. Be aware that although there is a technical limit of USB2 or lower of about 16 feet, if I remember correctly, not all devices will work at the maximum length, so make it as short as you absolutely have to. I've experimented in the past and the length limitation is true.
I don't know if new USB3 and USB3-certified cables have a longer range. I forget. I don't know if this would apply, going from a USB3 port to a USB2 device, but it's a good question.
Pretty much what the title says....details:
I ditched my horrible AT&Trash dsl to tether via my TB (faster speeds and saving $20/mo). Problem is, I recently moved and I have to have my phone right next to the window to get solid and consistent LTE signal, so every time I get a text or something I have to get up to go look at it, cause if I move my phone it'll drop to 3G (that's another issue....whenever it hands off from 4G to 3G I almost ALWAYS have to go into Airplane mode then back out or reboot for my TB to acquire 4G signal again...anyone know a quicker way? I have latest radios....) then my tethering all my but dies and I have to start the whole process over.
I am wondering if there is a way or maybe an app I can get where I can control my phone via my PC wirelessly while tethering.......from what I've read you either have to be connected via usb (window is too far away for that) and/or your pc and phone have to be connected to the same wifi network (which, if I'm tethering and my pc is connected to the internet via tethering to my phone, that isn't really true...is it?)
So.....any ideas?
Thanks much!
This may be of some help for texting. I use bluetooth for calls. I almost have the same situation.
Check out this Android Application I'm using "DesktopSMS" on my Thunderbolt. Check it out here: http://bit.ly/qApcgj
I had the same issue, my solution was rather eloquent I bought a tablet so that, while my phone is in my window, I can get my texts on my new happy Motorola Xoom. Not sure if its possible for ya BUT it is well worth the investment. Also, are you PAYING for your tethering?
Cmon lol, no random quips? I actually DO have a solution but SOMEONE has to say SOMETHING lol!
htcdesirezgeorge said:
Cmon lol, no random quips? I actually DO have a solution but SOMEONE has to say SOMETHING lol!
Click to expand...
Click to collapse
What is it??
htcdesirezgeorge said:
I had the same issue, my solution was rather eloquent I bought a tablet so that, while my phone is in my window, I can get my texts on my new happy Motorola Xoom. Not sure if its possible for ya BUT it is well worth the investment. Also, are you PAYING for your tethering?
Click to expand...
Click to collapse
"paying".....is a foreign word to me
So, I'm moving. And my PC doesn't have a WiFi card in it for the time being. Ethernet is out of the question.
I have an unlimited Verizon 4g plan... but I heard they don't let you tether for free anymore over their network with unlimited. (I can use WiFi root tether, but that's beside the point.)
I've tried using the Settings => Usb Tethering option, but stock sense doesn't let you tether without a 4g connection enabled.
Any ideas? (Preferably something without dumb limitations, like no https etc, but beggars can't be choosers.)
Thanks!
-Frankie
im on digital dream 2.2 and am posting from my wifi routed through my phone using the normal usb sertting smart detect or w/e its called
i disabled cell data just to be sure it works, as for stock i was kinda sure i had done the same thing before but dont have any way to test it again atm.
hyphydragon said:
im on digital dream 2.2 and am posting from my wifi routed through my phone using the normal usb sertting smart detect or w/e its called
i disabled cell data just to be sure it works, as for stock i was kinda sure i had done the same thing before but dont have any way to test it again atm.
Click to expand...
Click to collapse
Interesting. Do you have HTC Sync on your pc?
Only way it'll let me do it is if I use data. I'll post screens in a min
See
illusionz said:
See
Click to expand...
Click to collapse
I use fox fi and with the pdanet application on the pc you can fake your image hiding your tethering, doing it the way the guy above states does not work on stock anymore normally and would certainty show your usage. on pdanet just use stage two usage hiding uh is hard to explain and I'm on my phone I'll update my post in like 10 minutes showing what I mean with pictures on my pc K.
Sent from my VIPER DNA
reaverclan said:
I use fox fi and with the pdanet application on the pc you can fake your image hiding your tethering, doing it the way the guy above states does not work on stock anymore normally and would certainty show your usage. on pdanet just use stage two usage hiding uh is hard to explain and I'm on my phone I'll update my post in like 10 minutes showing what I mean with pictures on my pc K.
Sent from my VIPER DNA
Click to expand...
Click to collapse
Thanks mate. I didn't know PDA used my phones WiFi. Thought it only worked with 3g.
Doesn't the program not let you use https and stuff?
illusionz said:
Thanks mate. I didn't know PDA used my phones WiFi. Thought it only worked with 3g.
Doesn't the program not let you use https and stuff?
Click to expand...
Click to collapse
on PDANET atm with LEVEL II usage hiding and i was able to get into things like paypal with https and what not. So i think it would be fine, i don't have unlimited anymore so i use no hiding but i turned it on to see if it works and it seemed to. Im posting this with it on level II.
hyphydragon said:
im on digital dream 2.2 and am posting from my wifi routed through my phone using the normal usb sertting smart detect or w/e its called
i disabled cell data just to be sure it works, as for stock i was kinda sure i had done the same thing before but dont have any way to test it again atm.
Click to expand...
Click to collapse
Definitely works and will do the trick for now. Thanks man.
The free version kind of blows... I go through the allotted data in like a minute.
Do you notice pretty low speeds, or connection drops when the phone goes to sleep? Do you know if I need to keep it always screen on or something? Or is this the level 2 screening?
Wish there was a way to do this natively without having to do all this, but will work in a pinch. Thanks!
it works by using a advanced proxy type thing( its complicated) but i notice no difference with it on level 2 and none and witht he phone off i do have a fox fi key though since i use it for work a lot. with the free version i did notice it was slower but i had that version so long ago they had it where it was unlimited but only 180KB/s so it was slow regardless, this was a OG droid so long time ago. its still cheaper than getting hard line lol and an one time only payment, i used to have issues on windows 8 but their newest pdanet client for desktop fixed those. i get around 20mbps in the field generally when working.
hope this helps explain some things.
rvc
reaverclan said:
it works by using a advanced proxy type thing( its complicated) but i notice no difference with it on level 2 and none and witht he phone off i do have a fox fi key though since i use it for work a lot. with the free version i did notice it was slower but i had that version so long ago they had it where it was unlimited but only 180KB/s so it was slow regardless, this was a OG droid so long time ago. its still cheaper than getting hard line lol and an one time only payment, i used to have issues on windows 8 but their newest pdanet client for desktop fixed those. i get around 20mbps in the field generally when working.
hope this helps explain some things.
rvc
Click to expand...
Click to collapse
Thanks bud, yeah it helps. I'll probably end up buying it eventually... WiFi Tether [Root] works fine for WiFi, but for some reason FoxFi scares me. I feel verizon will strip my unlimited away from me while using FoxFi. Not sure why I feel safer using the WiFi root tether app though.
they should be able to tell your tethering with a normal non proxied app. In reality though they can allways tell if they cared but unless your use more than like 6 GB idk they would care if your plan is expensive enough lol.
Yeah, I wish there was another way than pdanet to do it. Wish there was a way to tell if the speeds are just my phone or the free pdanet version.
how low are the speeds on speedtest.net on pc vs on the app on the phone, mine are almost same.
I was.... "Testing" the download speeds through pdanet. Its about 1000Kbs slower through pdanet.