can anybody help me ? after all process been done at the process for the rom update , the active sync suddenly off , then my gene got 3 color screen addon the ruu come out with an error code 266 ... any ppl can help me ?
try to upgrade rom without SD card.
which GENE version you ave and which ROM you'r trying to use?
GENE_wm6.1_19971wwe fusion9.0 (01/10/2008)
pls you go back up by offical rom
Hi, every body! I'm using cingular 8125 current OS WM 6.1 (Touch Flo V. 1.0). I want to update to OS WM 6.5. But error with code 266 or 260. I check all about connection. the status is USB active sync connected. Itried to update without SD or SIM card too but still error with code 266 or 260. How can I do? Can you tell me the link that OS WM 6.5 supported with cingular 8125?
Related
This is my experience with my dead Hermes.....wich back to life
my case is:
my Hermes is an Imate JasJam loaded with TNT ROM ( WM6 ) with IPL-100 and SPL-1.04
1- during uptating the Radio the upgrade stop due to something wrong in the USB connection
2-i got a Hermes with these error :
A: Bootloader is OK
B: NO GSM
C: Operating system stop at first screen and not booting at all
The solution:
i did anything you can emagin with no success....loading another Radio( Failed )....loading another ROM ( Failed )...
What i did:
i used the new HTC wm6 ROM....which started to flash my Hermes without problems...it first loaded the SPL from 1.04 to 2.03 and after that start to flash the ROM and i stucked at the error ( INVALID VENDOR ID )......
here is the steps now:
1- use the new HTC ( wm6 ) ROM...the latest one as i did...this one will change the SPL to 2.03
2- get yourself the original 2005 ROM that fits your MFG ( Imate,O2.....etc)
which also incluse Radio as a deafult.
3-extract this rom to the separet files ( using WinZip or WinRar )
4-take the .NBH file of this ROM
5-extract the HTC ROM you used at step (1) and replace the .NBH with the from the ORIGINAL ROM ... this step will pass the (INVALIED VENDOR ID ) error.
6-the upgrade will go very well and now you will have a Hermes with WM2005 on it.
that is it......you got your device back...and now you can do anything with it...and upgrade it to any operating system.
Regards
Sherif
I tried to downgrade from Mysterious so i can try the new Rom from gullllum Prophet touch IX beta 3 and whenevr i tried i had an error message saying either cannot connect to device, the update utility is old !, or cannot define device or something my device is ofcourse Prophet touch and now currently ROM Less as it is on the bootloaded only or starts the start screen with the IPL and freezes please advise.
Mwalid said:
I tried to downgrade from Mysterious so i can try the new Rom from gullllum Prophet touch IX beta 3 and whenevr i tried i had an error message saying either cannot connect to device, the update utility is old !, or cannot define device or something my device is ofcourse Prophet touch and now currently ROM Less as it is on the bootloaded only or starts the start screen with the IPL and freezes please advise.[/QUOTE
Hi THere,
Take a Look Back.
1. you have to use Active Sync 4.5
2. Before you change the ROM to another Cooked ROM,you have to downgrade your prophet using ROM NVID (step 1 ROM) before you flash the prophet, so basically you can change the Prophet ROm after you flash to WM5 ROM (NVID or PVTemp ROM)
3. Do flashing if your sure that the prophet can be access using active sync.
Hope it help
Click to expand...
Click to collapse
m new in this . . . .
downloaded black satin n spl update files
nw da files dont run
it says failed to initialize error code. . . . .
can anyone help me
i have imate jasjam runing wm 5
also give link to the latest spl version file
above 2.10 oli
cause m not sure which version i downloaded. . .
what spl do you have at the moment
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
that page should tell you about puttin hard spl v7 on your hermes and has guides for other things on aswell
good luck
i also read this
i gt 1.somerhing
when trying tp update spl..... it gives 262 error
when directly updating rom it gives 260 error
hlp
Read post #1160 on page 116(?) of this thread - http://forum.xda-developers.com/showthread.php?t=296722
It shows how to flash Hard SPL without pc using the sd card...
Cheers...
hello everyone,
i had a problem while i was installing a cocked ROM
i installed a cocked Rom LILLY ROM v1.2.4 and i wanted to get back the original Rom again.
so i Run sspl-1.16-nike.exe from my phone and i started to install the official Nike ASIA WWE 2.12.707.2 Radio R 1.65.29.22
during the instalation on 14% i received an error:
Error 264 connection and till now i can't get my original ROM and can't use my phone i still see the 3 colours screen with the message: Upgrade ROM code error please try again.
i tried alot of times to do recovery by the same software but all are failed
please help me!!!
how i can get my original ROM again
my htc touch dual is really brand new (one week)
Problem with SPL
--------------------------------------------------------------------------------
Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
__________________
Need of You
plz dont waste threads...