Hi, I have a Sprint Touch Pro. I posted this in this section because I think my problem can be helped from anyone with my problem. I am trying to flash the Hard SPL using Parallels on Windows XP but everytime I try to it says the phone is not connected. I am able to transfer files and load cabs but specifically not flash the hard spl. I am using the correct one for a CDMA phone, and have tried with Parellels, VMware, and bootcamp with still no luck..... Any Suggestions?
You said this was a CDMA raph?
*Thread moved to CDMA forum *
Ta
Dave
Make sure ActiveSync is installed, and also that you have Microsoft .NET 1.1 and 2.0 installed.
just tried that with no luck... it will go all the way to the percentage bar of loading the SPL but than stays at 0 percent and says there is no connection
The issue is with the usb support Parallels has. I've moved onto VMware ( it converted my parallels image perfectly ). VMware is a bit older and has much better hardware support all around.
I've been able to install roms on many phones with this configuration.
how did you get it to work on VMware Fusion... i plug in the phone and it is able to put it into bootloader mode then it just stops
Never worked for me through VMWare Fusion or Parellels. I reboot in bootcamp.
Once it bootloader the PPC identifies as a different USB device, IMHO here stems the problems. Easier for me to reboot than try to solve it
VMware fusion installed with USB disabled within ActiveSync. This has let me install ROMs for a while. With some roms, dcd's latest, I've had to revert to copying the rom onto my sd card for installation that way.
Related
Hi .
I'm planning on upgrading the rom on my MDA Vario II (Dutch).
First I want to unlock the CID. I've got a 1.04 bootloader.
Recently I upgraded to MS Vista (RTM).
When I try to run the patched radio upgrade I always get a ERROR 150.
Yes.. I'm in bootloader mode. It's says IPL-1.01 and HERM300 SPL-1.04.
Could it be Vista??
yes its vista its had something to do with the sync tool in vista they will fix it according to a earlier post next time use the search function there is a thread about Vista and Ruu
I don't think they have released Mobile Device Center for Vista RTM yet... Right now, you see the phone as a drive... Or did you install the beta MDC?
both. I access the phone through the explorer. And I have the beta MDC setup for syncing with outlook etc.
This has been posted a million times, but here we go...upgrading ROMs will not work on Vista until manufactuers update their usb driver code on the installer; until then, use XP/2003. By the way, is that pirated Vista you have?
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
You have to be careful as if the program crashes during the upgrade of the rom you can brick your device, so I will stay with XP or SD card way to flash a rom.
aquasesh said:
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
Click to expand...
Click to collapse
I have Vista RTM and I confirm that the MDC is not stable enough for all these update work... it failed for me a few times and I'm lucky with my 8525 and it is still working OK after reflashing it with another PC (XP).
Aha. That explains that.
I've just managed to get my JasJar stuck in bootloader mode after trying many times to upgrade the ROM. This, despite the upgrade tools telling me there are errors.
Curses.
Apparently people don't know how to read what I posted...
ITS SAFE
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
ISN'T Safe!
phamoui said:
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
Click to expand...
Click to collapse
I am testing vista since CTP (Community Technology Preview), then RC1 (Release Candidate), RC2, now RTM (Ready To Market) as Technet Plus Member.
I can't say is safe to use it even for day by day syncing, I have always unpredictable results; my TyTn sometimes is a Smartphone, sometimes Pocket PC, syncing? may be, every time you connect you have to guess...
This happens because Windows Mobile Device Center (WMDC not included in Vista RTM) is still in BETA 3 stage, not even RC!
LESSON LEARNED
If you plan to install VISTA and you are a WM expert or just business user DON'T upgrade your XP, just install VISTA on a second HD and use your XP to solve the VISTA problems. Even Virtual PC 2007 (good to have with XP installed to have available some appz still not VISTA upgraded) couldn't use USB port, so no way to have a safe "old style" USB connection
Isn't VISTA fault, is a new tecnologies-early adopters problem
One of the most common source of problems with vista are USB drivers (no way in my knowledge to have a simple webcam working with VISTA)
This has great importance when you are doing something "uncommon" and "mission critical" like flashing something!
Good Morning!
Well, I upgraded the ROM on my (previously) Cingular 8525, two days ago, and continue to fail at getting it recognized by both my Dell M170 laptop and my Alienware Area51 Desktop via USB.
Activesync 4.5
Tried it with both Advanced Network Functionality and without.
All firewalls off.
No errors during ROM update.
Tried two different USB cables.
Reinstalled XPpro SP2, fully patched.
Tried removing and rediscovering all USB drivers for both machines.
I've tried everything I could think of, and in every order I could think of.
The OS discovers the device, and ultimately gives me a popup message that the USB device is installed correctly and ready for use, but then 10sec later I get "USB Device Not Recognized" pop up error....
Should I roll back to a previous version of Activesync? Can I roll the ROM back to a previous version?
I admit to surveying the forums here before posting, but it seems a bit confusing to me and I certainly don't want to destroy my phone.
Thanks in advance for your help!
jdtarch said:
Good Morning!
Well, I upgraded the ROM on my (previously) Cingular 8525, two days ago, and continue to fail at getting it recognized by both my Dell M170 laptop and my Alienware Area51 Desktop via USB.
Activesync 4.5
Tried it with both Advanced Network Functionality and without.
All firewalls off.
No errors during ROM update.
Tried two different USB cables.
Reinstalled XPpro SP2, fully patched.
Tried removing and rediscovering all USB drivers for both machines.
I've tried everything I could think of, and in every order I could think of.
The OS discovers the device, and ultimately gives me a popup message that the USB device is installed correctly and ready for use, but then 10sec later I get "USB Device Not Recognized" pop up error....
Should I roll back to a previous version of Activesync? Can I roll the ROM back to a previous version?
I admit to surveying the forums here before posting, but it seems a bit confusing to me and I certainly don't want to destroy my phone.
Thanks in advance for your help!
Click to expand...
Click to collapse
what os is running on your computer?
XPpro SP2 fully patched
jdtarch said:
XPpro SP2 fully patched
Click to expand...
Click to collapse
do you have .NET framework 2.0 installed?
edit removed questions that were answered in first post (guess I should read closer)
Did you flash a WM5 or WM6 rom?
I have issues with AS not being able to connect to my device sporadically when I am running WM5 roms but don't have issues at all with WM6 roms. I have no idea why this is but this problem goes away for me while running WM6.
Can you boot into bootloader and get a constant USB connection that way? if so you may be able to flash to another custom rom or shipped carrier rom.
And I know you said you already did this but uninstall and re-install activesync 4.5 to make sure its drivers are not corrupted. Select yest to overwrite when prompted (if prompted).
I recall reading that the software for unlocking/flashing custom roms was for XP only. Is there a solid, working solution for Vista yet? If not, is anyone planning to make one?
How does activesynch work with vista & outlook 2k7? Any downsides to upgrading?
Might have been problems with Vista 64, I'm running Vista 32 and have never had a problem with custom roms.
Im a vista user and never had any problems, i never read too much into it but from what i understand its because they dont update their drivers. Someone posted the driver update in this section. Ive tried dcd's and currently using no2chems latest.
Using Vista
I use Vista on my laptop and have been experimenting with the HTC Titan since mid December.
So far, I never had an issue with Vista ( and I have experimented lots!!)
The only thing with Vista on my phone compared to my XP desktop at work is that the transfer of files to the HTC is must faster with XP. The XP machine also connects and syncs a bit faster than the Vista.
I can confirm that running Titan_Unlocker, and loading ROMs via Vista 32 with Windows Mobile Device Center works just fine.
Vista USB
I have not been able to connect with USB on my computer runing vista. I use of course windows mobile device and connect thru bluetooth, but have never been able to connect with usb. I checked the setting I WMB and have allow usb connection,.
I can tell you from experience that flashing thru bluetooth boes not work. Tried it about a year age with the Vzw upgrade on my 6700, locked up in bootloader screen, I took it to vzw and they gave me a new 6700.
That's odd ^
My Sync works both ways, and out does XP in every single way.
Vista performance depends on hardware mostly, and top notch gets you top performance.
I haven't had any problems syncing with vista.
I did have one problem when trying to upgrade to a custom rom and maybe someone here can help me answer it.
I got the sprint 3.16 test rom on there ok, then i installed the unlocker, but i couldn't get out of bootloader screen. I had the exit bootloader program but it kept saying it couldn't find the usb. then i tried attaching it to my xp comp and running the exit bootloader app and it said it was missing some dll file. so i tried redownloading and even emailing the exit bootloader from my other comp but same issue, missing dll file.
I ended up just loading the relocker and then going straight back to the latest rom because i couldn't figure it out.
Hi,
Using the old HTC wwe RUU (I've tried the two different recommended ones from the guides here at unlockr and Modaco) the RUU goes to the bootloader then on the PC is says 'waiting for bootloader' which then goes to error [171] USB connection error after about a minute (handset displays USB RUU). I've got adb and all the drivers. What am I doing wrong, I establish a sync with HTC sync (latest version ) before launching the RUU? Can I use Droid Explorer to help me or are these RUUs the only way of getting an old ROM on?
Can anyone suggest anything?
Thanks
Matt
I've trawled the forum with search but can't find a resolution.
msiviter said:
Hi,
Using the old HTC wwe RUU (I've tried the two different recommended ones from the guides here at unlockr and Modaco) the RUU goes to the bootloader then on the PC is says 'waiting for bootloader' which then goes to error [171] USB connection error after about a minute (handset displays USB RUU). I've got adb and all the drivers. What am I doing wrong, I establish a sync with HTC sync (latest version ) before launching the RUU? Can I use Droid Explorer to help me or are these RUUs the only way of getting an old ROM on?
Can anyone suggest anything?
Thanks
Matt
I've trawled the forum with search but can't find a resolution.
Click to expand...
Click to collapse
You are probably running the wrong driver. Follow my driver guide part iv. (You should be on My HTC not ADB driver)
If not then probably your gold card hasn't stuck (check it) or you'll need to use windows xp instead (can use a virtual machine).
I had this issue when using windows 7 64 bit.
Download the drivers in the attachment in the noob guide. Then reboot your phone into the htc bootloader (power on while holding back button).
Then connect your phone to the pc and use device manager (have disk) to install the drivers you downloaded. then run the HTC RUU with the phone still in the htc bootloader.
The drivers had to be installed whilst I was in the bootloader for it to work for me.
Might be worth adding this to the noob guide?
oliwan said:
Then reboot your phone into the htc bootloader (power on while holding back button).
Then connect your phone to the pc and use device manager (have disk) to install the drivers you downloaded. then run the HTC RUU with the phone still in the htc bootloader.
The drivers had to be installed whilst I was in the bootloader for it to work for me.
Might be worth adding this to the noob guide?
Click to expand...
Click to collapse
Depending on whether this works for this guy, might be a simpler method than the alternative.
@msiviter - please try the above quoted method first
I had this issue, and the solution for me was just to swap to a new computer, and it installed instantly
Try This
While trying to flash the RUU the phone reboots.
When it is rebooted you see RUU.usb on your phone screen. But no flash process.
While phone is still connected to pc and is still in RUU.usb mode.
Go to device manager on your pc. Right klik android devices and renew the USB driver to HTC driver.
Reboot computer and reboot phone.
then try to flash again.
This was the solution for me.
Tried all the above, spent 6 hours on it, I've got the closest by going to a (win7 64bit) pc that has never had the sdk on it then the RUU goes further but terminates with error [140] Incorrect Bootloader. I've made my goldcard again to no avail (Sandisk 512mb) and checked the goldcard data which was OK, I'll try it tomorrow on a different (Kingston 8gb) card.
Any other ideas?
Thanks for your help so far.
Matt
Update: New SD card and goldcard now gives 'Error [131] Incorrect Customer ID' on my Win7 x64, I'll try on my dads old XP laptop later!!!
I suspect it is a windows 7 issue. On the first attempt I managed to downgrade when I moved to my Vista machine.
I must have tried for about 6 hours with Win7 then moved back to my old Vista PC and it worked first time.
From observing the process on Win7, when the phone boots to the bootloader, the RUU program then gives it 180 seconds to confirm Bootloader is loaded "waiting for bootloader...1-180sec". Looking at the system tray the USB driver that is used for HTCsync disconnects and the device now says it is Android 1.0 and Win7 needs to find a driver for this. Win7 fails to find a driver for "Android 1.0" so it never allows propper communication between the phone and the computer.
(There are separate Win7 64-bit drivers - check you are using these?)
P.P.S. The stock card that came with the phone worked fine as a Goldcard for me and I think most people.
OK I've now tried on a sp3 x86 XP machine and I still got Error [140] and [131] whether trying from phone synced to pc or phone booted in Fastboot USB.
I've given up. I'll wait until June!
msiviter said:
OK I've now tried on a sp3 x86 XP machine and I still got Error [140] and [131] wheter trying from phone synced to pc or phone booted in Fastboot USB.
I've given up. I'll wait until June!
Click to expand...
Click to collapse
You installed the latest version of HTC Sync while your phone was unplugged/ Then you plugged the phone in to detect new drivers. Waited for the drivers to successfully install and then ran the RUU?
msiviter said:
OK I've now tried on a sp3 x86 XP machine and I still got Error [140] and [131] wheter trying from phone synced to pc or phone booted in Fastboot USB.
I've given up. I'll wait until June!
Click to expand...
Click to collapse
What drivers are reading in device manager when in the normal os? And same question when in fastboot mode?
I did exactly that on my win7 x64 and xp mce sp3 x86 pc's both had 'My HTC' in Device manager and had a sync relationship established with the latest 'Legend' HTC sync software.
Both gave the almost random error messages although now the bootloader almost finishes now so I'm past the [171] usb (driver) errors and I'm on [131] and [140] errors which pertain to bootloader and incorrect customer errors which I think are goldcard related. Although like most people I do rush through things and not read instructions! I've now made 4 goldcards via the various guides and I'm sure they are OK.
My Bro is getting his desire this week and I was determined to beat him to eclair but it looks like I'm in the lap of the T-mobile gods waiting until June (or july....September.... December etc).
Matt
I have same issue with msiviter, CUSTOMER ID ERROR.
I was able to run RUU regarding to guid from btdag (section IV).
What can I do now?
try deleting the drivers and then starting again perhaps?
I have the same issue here, can't downgrade to the previous Orange RUU, also using Win7 x64.
Have tried reinstalling drivers, and using other ROMS, nothing seems to work. I also find that when I run the RUU it loses connection to my phone before it even tried rebooting the phone into the bootloader.
shotgunfool said:
I had this issue, and the solution for me was just to swap to a new computer, and it installed instantly
Click to expand...
Click to collapse
this is how i've done 2 of mine, 2 dev laptops on 2 differnt hero's ... didnt work, with adb, sdk everything loaded for android dev ...
desktop worked fine for both hero's.
Same Issue
The trick to get the RUU to actually update the phone, for me, was to make sure that in Device Manager the ADB Interface driver was showing "My HTC" and not "HTC Bootloader". I was able to switch between drivers using the update driver button, and didn't need to download any new files or specify a folder or anything.
use windows xp and try my method of downgrade from 2.1 in my sig.
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.