i have just tried to load the new rom of MiChY. At 88% th pda stop updating and now i have black and white lines to the screen, even i done a hard reset. the pc shows me the mesange "260 error". (so i can' t use ActiveSync). propably i done something wrong
please help
Sorry for my english!!!
i have the same issue only i got to 92% of the rom before it kicked out and left me with the corrupted romm image i can kick off an udate but because the rom is screwed the updater is not getting a valid device id back and i get kicked out at 1% with invalid device id.
anyone with any help or advice would be appreciated
cheers
my apologies for asking a question that seems to have been asked before ifn a different thread, somehow missed those threads when i was looking through the forum the first couple of times.
anyway followed the advice on this thread http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 and then flashed a fresh rom straight onto the device,
so thanks to everyone who contributed to those threads that the soloution was in
it s all ok now
Related
To All and specially moderator,
I recently just lost all rom image and now my himalaya are totally dead, because I try to upgrade software from a program.
Probably you have seen many of these posting from a newbie like myself. Speaking of the truth, even after browsing many hours in this forum I still have no Idea at all how to restoring my operating system.
Well, my plea is, could one of the senior/expert on this forum to post new instruction how to restore the rom (even how to upgrade to wm2003SE, one by one, not just reverting to old post) I believe many of newbie ( lack of software knowledge) have the same problem with me.
Thank you.
Regards.
Do you get anything on screen, do you have "serial", when you connect to usb do you get "usb" on screen. If yes then you just need to download original rom for your phone and restart flashing procedure. If there is nothing on screen I cant help, sorry.
Hi All,
As a newbie on the block I have been reading trhough the various posts here on upgrading or updating the PPC. There is a lot to be found on what rom's to use etc, etc, but nonetheless I am now stuck after a partial upgrade probably with a m1000 that will not go any further then the bootloader.
As i gathered from other posts it's waiting to be "fed".
But the feeding is not working, with none of the realeases I tried for this Himalaya type.
All of them either lock up or bum out with an error 119, telling me to reset the device and try again...
I can keep doing this until i'm old and grey I guess as each time the same thing happens.
Anyone here have a suggestion how to get some new data into "his brain" or should I just consider the unit trashed and throw it into a wastebin ?
I am really lost here. Any help is much appreciated.
Peter
Petey said:
Hi All,
As a newbie on the block I have been reading trhough the various posts here on upgrading or updating the PPC. There is a lot to be found on what rom's to use etc, etc, but nonetheless I am now stuck after a partial upgrade probably with a m1000 that will not go any further then the bootloader.
As i gathered from other posts it's waiting to be "fed".
But the feeding is not working, with none of the realeases I tried for this Himalaya type.
All of them either lock up or bum out with an error 119, telling me to reset the device and try again...
I can keep doing this until i'm old and grey I guess as each time the same thing happens.
Anyone here have a suggestion how to get some new data into "his brain" or should I just consider the unit trashed and throw it into a wastebin ?
I am really lost here. Any help is much appreciated.
Peter
Click to expand...
Click to collapse
additionally i cannot get to the bootmenu to format registry and storage, so please, if anyone has an original rom backed up that can help me restore it, let me know.
peter
Hi,
I have been following the HD2/android thread for a while now and thought it was about time to get rid of WM.
I installed HSPL3 via the thread on here containing HSPL3_PKG.zip and just downloaded the Kwbr_HD2_5.4 rom to flash onto my leo. I have put the file onto an SD card and renamed to LEOIMG, however, upon loading it just gets stuck at 'update in progress,' at around 99%.
I tried pulling the battery out and restarting the phone, but I just get a message in a red triangle on a black screen saying 'software update failed, please try again.'
Does anyone know how to get around this?
Any help would be much appreciated.
Cheers.
Bump.
Sorry if I seem impatient, but I can only do this at work, as my home PC is without a motherboard at present (sent off for RMA).
reply
did you checked the original thread where you posted the question ?
reply #1
reply #2
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
t45o5 said:
Hello, my HD2 started entering the re-boot loop ...........................Anw after that the phone is kind of dead, freezes at the HTC boot screen. ................I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. .
Click to expand...
Click to collapse
check the battery pins. ive read of people for whom it is possible to get into bootloader, and it seems like normal, but then it fails to load when trying to boot fully, usually a reboot loop.
forget about finding what rom is on there currently, its time wasted, really.
a better use of your time is using your serial to find out which rom the htc website will let you have, and flash that, from sd card preferably.
Why not just reset the phone, and start over?
found a good rom, installed it via sd card, still reboot loop. that make me think that the problem might be the battery pins. if so what's the solution?
same thing happend to me just adjust the pins
Foxanax said:
same thing happend to me just adjust the pins
Click to expand...
Click to collapse
how do you adjust the pins? They're supposed to be straight right?
t45o5 said:
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
I am unable reboot my phone. THe ROM keeps trying to reload and wont let me do anything. Any help is appreciated.
sounds like bootlooping.. read in the thread for rom you were trying to load and see if anyone else had similar problems. First time this happened to me I kinda had panic attack. Learned to use odin, got a jig (search for those.. for bout 10 bucks sure saves the day) and start over.
*sigh*
I swear, there must be a forum rule that everyone's first post must be something along the lines of "Help! My phones broke and I need someone to fix it without me giving out any details about the problem!"
Anyway, give us some more information and we can probably help.