I got a X05HT last week and found time to do the work.
I customized a new ROM based on [ROM][WWE][13.02.09] PROven ROM 2.2 20764 UNPROTECTED . Thanx go to qsqa.
My rom info is at #2.
Here is some info about "How to replace WINCE.NLS" in Chinese. Thank pcg
[TUT] Manual Full XIP Porting (& MANY MORE TUTORIALS) [ONLINE]. Thank Ameet.
CJK nls and fonts: e-china for Diamond (Japanese, Chinese, Korean, etc.). Thank asukal.
2009/02/17: PROven 2.2, http://www.4shared.com/file/88033736/23e4e2ea/PROven_ROM_22_Asian_NLS.html
UC fixED
remove osaxst0.dll, osaxst1.dll, hd.dll, kd.dll, and also bmui.nb0
Click to expand...
Click to collapse
Another version At0mAng-V3.7: http://forum.xda-developers.com/showpost.php?p=3334861&postcount=42
Same XIP with PROven 2.2.
----- old -----
2009/01/24: PROven 1.14a, http://www.4shared.com/file/82246715/e49d03b5/PROven_ROM_114a_MSVC_Asian_NLS.html
2008/12/17: PROven 1.08, http://www.4shared.com/file/76398776/d5b2a311/PROven_ROM_108_CVSD_Asian_NLS.html
Please let me know your test result!
Here is the processes.
1. Prepare OS.NB.payload (xip.bin,OEM,SYS)
Be caution! A large WINCE.NLS may push out some modules!
Please make sure your new map includes all modules.
Here are last part of my new and old map.txt.
NEW map.txt
8047b000 - 8047b000 L00000000 Start: start of RAM
8047b000 - 8047c000 L00001000 initialized data of region_1 osaxst1.dll
8047c000 - 80480000 L00004000 NUL
80480000 - 80486000 L00006000 uninitialized data of region_1 nk.exe
80486000 - 80504000 L0007e000 initialized data of region_2 nk.exe
80504000 - 80517000 L00013000 initialized data of region_1 kd.dll
80517000 - 80517000 L00000000 ------ start of RAM free space
80517000 - 83400000 L02ee9000 NUL
83400000 - 83400000 L00000000 End: end of RAM
Click to expand...
Click to collapse
OLD map.txt
803e2000 - 803e2000 L00000000 Start: start of RAM
803e2000 - 803e7000 L00005000 NUL
803e7000 - 803e8000 L00001000 initialized data of region_1 osaxst1.dll
803e8000 - 803f0000 L00008000 NUL
803f0000 - 803f6000 L00006000 uninitialized data of region_1 nk.exe
803f6000 - 80474000 L0007e000 initialized data of region_2 nk.exe
80474000 - 80487000 L00013000 initialized data of region_1 kd.dll
80487000 - 80487000 L00000000 ------ start of RAM free space
80487000 - 83400000 L02f79000 NUL
83400000 - 83400000 L00000000 End: end of RAM
Click to expand...
Click to collapse
2. Edit xip.bin to replace WINCE.nls (real hard work).
3. Put "e-china for Diamond" to OEM.
4. BuildRom again.
My rom info:
The rom is ready to shown CJK characters (Chinese, Japanese, Korean etc.)
You can select CJK Locale freely. Thus you can use CJK at the same time.
Find your favorite input methods and just install them.
Here are all Registries I changed or added:
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
[HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00001041
"DefaultACP"=dword:00000932
"DefaultOCP"=dword:00000932
"SystemLCID"=dword:00001041
"LegacyLocaleMode"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010411]
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\GDI]
"DisableFarEastWordBreak"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SkipTable]
"Tahoma"="005c,00a5,007e,0391-03c9,2026,2116,221a,25a0-25ff"
"Courier New"="005c"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink]
"Tarisaka U MS-P2350"="\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"Tahoma"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"Times New Roman"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"Symbol"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"ＭＳ Ｐゴシック"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"ＭＳ ゴシック"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"MS PGothic"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"MS Gothic"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"MS UI Gothic"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
"Ariel"="\\windows\\TrskU.ttf,Tarisaka U MS-P2350"
Click to expand...
Click to collapse
Thanks in advanced
Have you done any WWE ROM with chinese (Trad / Simplified) and Asian regional support?
Please post. I am happy to support in testing too...
Thanks very much.
The rom is ready to show Chinese, Japanese etc.
You can just install any input method you like: ZTA4, HWMLH0802.
Find your favorites here:
http://bbs.pdafans.com/
I use Atok with HappyTappingKeyboard, ZTA4, HWMLH0802.
chris_khho said:
Have you done any WWE ROM with chinese (Trad / Simplified) and Asian regional support?
Please post. I am happy to support in testing too...
Thanks very much.
Click to expand...
Click to collapse
Thanks for your effort
I am going to try this one too
Sounds good. I will give it a try tonight.
Just want to confirm: will this rom be able to display Chinese and other Asian characters or it also can set locale to China...? Thanks.
Tks a lot!!! Downloading...
Didn't see your link in the original post.....yes got it now.
Will you do other ROM in this forum?
Updated: I used your ROM now but the word completion is gone....any ideas?
Yes! You can select Chinese(chs,cht),Japanese,Korean, etc from the Locale.
I use both Japanese and Chinese at the same time.
clia said:
Sounds good. I will give it a try tonight.
Just want to confirm: will this rom be able to display Chinese and other Asian characters or it also can set locale to China...? Thanks.
Click to expand...
Click to collapse
It seems it is the feature.
Someone is checking.
I don't think the other rom gives DSM and RGU. The modification will be difficult.
Basically, one can modify but ...
chris_khho said:
Didn't see your link in the original post.....yes got it now.
Will you do other ROM in this forum?
Updated: I used your ROM now but the word completion is gone....any ideas?
Click to expand...
Click to collapse
T9 or Word Completion
Do you have any ideas how to get them back to work with your ROM?
Thanks a lot.
s2k7 said:
Yes! You can select Chinese(chs,cht),Japanese,Korean, etc from the Locale.
I use both Japanese and Chinese at the same time.
Click to expand...
Click to collapse
thx, s2k7. I am working on customizing my fuze with your rom. Found something unfamiliar but yet confirm what would be the cause. Will report back.
As others posted, missing T9 is a big concern. Possible to have a solution of getting it back?
Happy Holidays!
T9 input - found it
Hi all,
At the end, I found this software. You have to install the main + ENG language pack to get it working.
http://forum.xda-developers.com/showthread.php?t=426281
Although it is not with original word completion, it is better than nothing.
Merry Xmas.
chris_khho said:
Hi all,
At the end, I found this software. You have to install the main + ENG language pack to get it working.
http://forum.xda-developers.com/showthread.php?t=426281
Although it is not with original word completion, it is better than nothing.
Merry Xmas.
Click to expand...
Click to collapse
Yes, I know this one. But I keep getting permission error during the Main installation.
Maybe I need another hard reset?
EDIT: still no luck after a hard-reset. Any advice would be appreciated.
EDIT2: my mistake - didn't read instruction carefully. First terminate SipGT_app process then the installation go through smoothly .
Here are Registries I changed or added (No fonts related) :
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
[HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00001041
"DefaultACP"=dword:00000932
"DefaultOCP"=dword:00000932
"SystemLCID"=dword:00001041
"LegacyLocaleMode"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010411]
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\GDI]
"DisableFarEastWordBreak"=dword:00000000
Click to expand...
Click to collapse
chris_khho said:
Do you have any ideas how to get them back to work with your ROM?
Thanks a lot.
Click to expand...
Click to collapse
After a couple of days try of customization (including 3 hard resets) especially testing different radios, I think my Fuze is stable and work as I expected. Fine tune to optimize battery and other performance issues might be needed but not major. A GREAT ROM.
What I like the most is the OP's integration of Asian support with a WWE ROM. This is the first time my Gmail can read emails with Chinese characters correstly without messing up other features. Before loading this ROM to my phne, I almost decide to give us Gmail as I had to open my computer to read emails received from my Chinese friends.
Also OP's selection of the base ROM is appreciated. IMHO, PROven 1.08 is the most STABLE Touch Pro ROM here. I know this may not be the newest build with all funcy features. However, the fundamental for most of us here is stability as the phone is a tool we use everyday but not a toy (at least not primarily).
I am very grateful to s2k7's effort to make this happen, and hope this release can be continued along with the update with the base ROM even I understand the fact of that the request of C/J/K support over WWE ROM is limited to a small group of users.
Thanks s2k7 again. Happy New Year!
Deleted. Sorry
New update version?
Hello, s2k7:
qsqa has been releasing updated versions of his ROM. just wonder if you are going to follow. Thanks a lot.
Hi s2k7
I'm using FarEastone customized Touch Pro here in Taiwan and changed settings to Japanese as you have mentioned above. After I installed IME_31J for JP Input, I'm having problem writing Japanese using Hardware Keyboard.
Settings done by PQzII by enabling IME tapping SYM key, however, once I tried to type any letter on the keyboard, the settings returned to English Keyboard.
Software Keyboard is working fine by typing Japanese characters using Romaji input method.
Any idea of how to fix this problem?
I have solved this problem by myself. My Touch Pro is customized for Taiwan's FarEastone. I have found that the Keyboard layout does something for my problem, therefore I changed registry HKLM\Hardware\DeviceMap\KEYBD\CurLang from 404 (tw Chinese) to 409 (US). I use PQzII to toggle IME (ATOK) and everything seems working OK. お騒がせしました
I am busy now, and hope to give a upgrade on Jan. 21.
clia said:
Hello, s2k7:
qsqa has been releasing updated versions of his ROM. just wonder if you are going to follow. Thanks a lot.
Click to expand...
Click to collapse
Related
Hello all!
I port new build for our device.
Features:
Fully workable drivers for battery(without BatFix), keyboard and other devices
Fully workable office 2007 (Word, Excel, PowerPoint, OneNote, FaxView, Zip)
and other features
In attach you find a link to this ROM.
Comments about extrom:
you can delete all cabs and put into this dir yours favorite progs.
On a pictures all in russian, but if you delete russification cab from extrom - all will be in english.
pass: k0ster
FOR ENGLISH INPUT install this cab
http://4pda.ru/forum/attach/833363/k...InpMethWWE.cab
and one helpful link with wwe-keyboard and other tools:
Click here and read
Tools for changing PagePoll size only for this ROM!!!
Hi Koster
Since most here on xda-develepors don't read russian could you post some details here..
rohanmaini said:
Hi Koster
Since most here on xda-develepors don't read russian could you post some details here..
Click to expand...
Click to collapse
Ok!
This ROM composed on our drivers from wm5 aku 2.20
And now you dont need BatFix.
In additional software:
All is standard - Adobe reader, TAO Java, Zip, Camera 3.02 (because this camera driver without battery drain as my 4.03 and higher), MMS 3.5.
Thats all!!!
This is a CLEAN ROM !!
Hi k0ster, I'm flashing your ROM now. I'm spanish so i would like to know which reg-keys control regional settings for creating a cab to put in the extrom. Could you help me?
Thanks!
Eladio.Linares said:
Hi k0ster, I'm flashing your ROM now. I'm spanish so i would like to know which reg-keys control regional settings for creating a cab to put in the extrom. Could you help me?
Thanks!
Click to expand...
Click to collapse
Try to edit this values:
[HKEY_LOCAL_MACHINE\nls]
"DefaultLCID" = dword:419 ;your locale
[HKEY_LOCAL_MACHINE\nls]
"SystemLCID" = dword:419 ;your locale
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\International]
"LCID"=dword:419 ;your locale
"ACP"=dword:4e3 ;your codepage in hex (here 1251)
k0ster said:
Try to edit this values:
[HKEY_LOCAL_MACHINE\nls]
"DefaultLCID" = dword:419 ;your locale
[HKEY_LOCAL_MACHINE\nls]
"SystemLCID" = dword:419 ;your locale
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\International]
"LCID"=dword:419 ;your locale
"ACP"=dword:4e3 ;your codepage in hex (here 1251)
Click to expand...
Click to collapse
If I build a rom based on your rom will I be able to use the pagepool patch?
privet k0ster, nice work !
spashiba
gullum said:
If I build a rom based on your rom will I be able to use the pagepool patch?
Click to expand...
Click to collapse
I think yes, if you dont change the XIP-section, and yours nba-file have a name "Prophet_17944wwe&rus_k0ster.nba" because this name hardly writed in PagePool-utils.
Jesterz said:
privet k0ster, nice work !
spashiba
Click to expand...
Click to collapse
Glad to see you friend!
All for yours happyness
Thanks for yours russian
k0ster said:
Try to edit this values:
...QUOTE]
Million Thanks!
Advice:
When using Touch_CommManager.cab posted at 4pda.ru, it complaints with Msg "CommManager does not support flight mode" and cannot be run.
Click to expand...
Click to collapse
Ok.
I try to fix this cab.
May be i missed something.
I'm sorry but I cannot find where to download this rom?Can u give me a hand?
Yomita said:
I'm sorry but I cannot find where to download this rom?Can u give me a hand?
Click to expand...
Click to collapse
Content of link.txt attach at post#1:
For WWE-users:
Prophet, Wizard, Charmer WM6 core:1413 OS:17944 Bilingual WWE&RUS ROM:
http://rapidshare.com/files/44700575/wm6wwerus_1413_17944_k0ster_v3.7z.html
Herald WM6 core:1238 OS:17944 WWE ROM:
http://www.savefile.com/files/910557
Artemis WM6 core:1238 OS:17944 WWE ROM:
http://rapidshare.com/files/44525304/Artemis_17944wwe_k0ster.7z.html
If you want to support me, you can donate me on Yandex.money (¹ 41001153555303)
Exchange different electronic money to Yandex.money you can at:
www.roboxchange.com
Thank you for support.
Yours k0ster
What is the original ppool size of this rom? Also, when i want the rom english, i just delete all the cabs in extrom? or do i need to replace them with english ones? Rom looks great, i´m kind of bored flashing all thos nice looking touch roms which all have more or less bugs.
Are the common WM6 problems fixed on this rom?
- Missing wifi settings
- Missing bt settings
- Corrupt mail accounts
- Wifi not tuning on all tries
Thanks.
Does AD2P works?
Hi, how about ad2p with this ROm
Can't assign button 1 and button 2.
I have this bug
Someone???
Another keyboard peraps? (Skin mUn?I couldn't find it by searching )
FOR ENGLISH INPUT install this cab
http://4pda.ru/forum/attach/833363/k0ster_v3_InpMethWWE.cab
If You want to try ROMs with various pagepools, You can:
1. Download and unpack the attached file into any location on Your PC.
2. Start the PagePool Changer.
3. Select the ROM file (Your RUU_signed.nbh; but - works with OS.nb too).
4. If selected file is valid ROM (pagepool size found), You can change the pagepool size. After that press "Change to" button.
Done. Pagepool size is changed. Flash the ROM and enjoy.
And never download ROMs with different pagepools anymore - don't abuse Internet with unnecessary traffic...
Version History
1.0 - Initial release. Hermes-oriented only.
1.1 - Multiplatform support added. Supported platforms: Artemis, Hermes, Prophet, Touch, Trinity.
1.2 - Supported platforms:
Artemis, Athena, Herald, Hermes, Touch, Trinity (.nbh and OS.nb files)
Charmer, Wizard (OS nb files only - not .nbf!)
Prophet (.nba files)
2.0 - Re-designed interface, improved functionality. Added possibility to set not only integer values; range is now 0-64 Mb. In addition checked on HTC Kaiser, FS Loox N520, HP iPAQ 4700 and BenQ P51 ROMs - works
2.1 - This version fixes problem, reported by g0dspeed for Polaris "WM6.1" ROM:
If target-ROM has no Boot[ULDR] partition, (like bepe's newest for Polaris) PagePool_Changer can't find PagePool signature.
Click to expand...
Click to collapse
The search algorithm is improved. No problem now.
2.2 - The same as 2.1, but with two new things:
range 0-128 Mb is now allowed and
command line mode is added; usage: PagePool Changer.exe [ROM file name [new pagepool value]]
NOTE: In command line mode pressing of the "Change" button closes the app.
2.21 - "Valid PagePool Value" is now not ">0", but ">=0"
Localizations:
v1.2 Simp-Chinese(zh-CN) by easyt - here
Handy. Nice!
Why can not change to 0 page pool, someone says it is super fast.
zfs said:
Why can not change to 0 page pool, someone says it is super fast.
Click to expand...
Click to collapse
Yes, negative values are not allowed too...
Great app, cheers! Linked here
zfs said:
Why can not change to 0 page pool, someone says it is super fast.
Click to expand...
Click to collapse
actually it might be super slow
Aye, it'd the the Dead Pool.
Multiplatform: not Hermes only
chunkymonkey said:
Aye, it'd the the Dead Pool.
Click to expand...
Click to collapse
Discussion about PP=0 is, of course, interesting-helpful-productiv...
But: for me is more interesting thing - is the algorithm I'd realised Hermes-specific or can be applied to other platforms too?
I tried to find/change PP in some ROMs. Results:
Platform/File/Result/Note
------------------------------------------------------------
Artemis/RUU_signed.nbh/Found (8 Mb)/xdaorbit-windows-update.exe
Elf/RUU_signed.nbh/Found (8 Mb)/RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
Prophet/nk.nba/Found (8 Mb)/Prophet_WM6_17913_TrueNeytral_1_4MS.rar
Trinity/RUU_signed.nbh/Found (6 Mb)/img-38311-RUU_Trinity_mUn_2_01_TE_WWE.exe
Wizard/nk.nbf/Not found/Stable_Ground.zip
Seems like the PagePool Changer can be used by ROM cooking not for Hermes only. I checked (here and on 4pda.ru) - PP-change algorithm for Elf, Trinity and Prophet is the same as for Hermes. In Wizard's case I need to find clear description of PP-change algorithm... can someone point me to right post?
does this works with htc touch/ELF?
thanks!
starlit said:
does this works with htc touch/ELF?
thanks!
Click to expand...
Click to collapse
Must do. The pagepool search/find/change algorithm is the same as for Hermes: description.
ROM file has the same extension (.nbh) as Hermes and can be processed by PagePool Changer easy.
Unfortunately, I don't own the Elf and cannot flash/test ROM myself.
Thank You!
Great tool "om-by" much better than poking around with hex editor
.... why do I see the wrong in what Ive just said
OMG! This is absolutely amazing!
Thanks SO much! You're right, why keep downloading the same ROM just for a different pagepool.
Cewl beans!
hi! thanks for this tool. I dont have the ELF (yet)
But if the files from the RRU can be updated using the tool, it should be ok right?
Appreciate if someone who have a touch who test this let us know the results. This is a very simple and excellent tool! Just update the file can do the normal update right?
I hope it works as I am going to get a touch soon!
Thanks again!
Perfect tool. Thanks dude
Excellent work om-by!!!! Thanks...
Version 1.2 released
Version 1.2 released.
1.2 - Supported platforms:
Artemis, Athena, Herald, Hermes, Touch, Trinity (.nbh and OS.nb files)
Charmer, Wizard (OS nb files only - not .nbf!)
Prophet (.nba files)
It 'll be last last version of "pre-flash" PagePool Changer. If I'll have time next month (now I don't have), I'll think about "inside" variant of it.
OK
Good utility thanks!!
Genius Tool!
om-by said:
Version 1.2 released.
1.2 - Supported platforms:
Artemis, Athena, Herald, Hermes, Touch, Trinity (.nbh and OS.nb files)
Charmer, Wizard (OS nb files only - not .nbf!)
Prophet (.nba files)
It 'll be last last version of "pre-flash" PagePool Changer. If I'll have time next month (now I don't have), I'll think about "inside" variant of it.
Click to expand...
Click to collapse
Thank you!
I make the Simp-Chinese(zh-CN) version!
easyt said:
I make the Simp-Chinese(zh-CN) version!
Click to expand...
Click to collapse
Thanks! Link lifted to head.
DEVELOPMENT DISCONTINUED
VERSION Beta 3.2 is out, see end of this post
Hello to all Charmer users.
This is a another German ROM for Charmer (MDA II Compact).
Thanks to gullum and vlodeck for the base ROMs and the permission to re-cook.
see this link: http://forum.xda-developers.com/showthread.php?t=323979
Also thanks to mschmitz for the idea, the work he put into his German ROM - see this link: http://forum.xda-developers.com/showthread.php?t=331142, for providing the link to the “how-to translate” and for inspiring me to cook the “perfect” ROM (at least for my purposes).
My idea/goal is to gain as much Memory as possible by keeping ROM small as Charmer gets remarkable slower if usable MEM goes below 15MB.
Future Plans:
This ROM: I will try to get it stable and "entirely" German. Thereafter:
New ROM: I plan to cook a slim “base” ROM and let the user decide what to install (e.g. only “Tastatur” installed, rest can be de-installed by user).
This is the first stable version as I did not publish Beta 1 – 2 due to unsolved items (that are solved now in this beta 3).
Now what’s the difference to vlodecks English and mschmitz German ROM:
I implemented “real” German Inputs, so all English versions all DLLs have been removed to save space (e.g. in mschmitz ROM you will have “Keyboard” and “Tastatur” which causes selection troubles).
Input Method Selection therefore does not require “tricks” anymore and works like expected. I anyways included IM Selector (see below).
Following Programs are NOT included in my ROM compared to vlodeck and mschmitz:
- Some Themes:
Black Light.tsk
Black Satin.tsk
Wm_black2.tsk
- Ringtone: Ring-WindowsMobile .wma
- Some Freeware (download and install it if you need it)
Call Firewall
Group SMS Application
Jeodek Java
WM5torage
PHM Regedit (as Taskmanager provides the best Registry Editor I know)
- VoIP (Voice over IP)
If you need VoIP you will find a Folder “Voice over IP” in RAR File. Simply install both cab Files and you have VoIP – will take about 2MB space.
Programs that ARE INCLUDED in ROM:
- All German Inputs (removed all english DLLs)
- pBar (new Version 1.5 iso 1.4 like in Vlodecks), good Task manager with battery monitor, etc
- kbdddr.dll (Charmer kbddrv as Vlodeck uses Prophet)
- allblack.tsk: (This is a black Theme which also removes „WM6 Shiny/Glossy bars”, so this is a real flat black theme, e.g. use for iPhone Skin)
- PPCPIMBackup (new Version). Backup your Contacts, Phonelist, SMS, etc..
- IM Selector (You can choose a an input method that is Standard after Soft reboot. Standard is now “Tastatur”)
- Phonepad (Intellipad) GER/ENG only, I removed all other Languages (like Greek to save space)
- wince.nls (exchanged from Prophet Version to Charmer Version – Needed for ActiveSync over MS Exchange Server)
- MMS Templates translated to German
- Icons for Program Folders
- Filedialog changer
- Task Manger by dotfred (including a Registry Editor)
How to:
My checklist how to flash your Charmer to WM6 can be found here:
http://forum.xda-developers.com/showthread.php?t=363882
Thereafter be sure to READ vlodecks HowTo and see screenshots of (english version) WM6 for Charmer!!
http://forum.xda-developers.com/showthread.php?t=323979
You will also find a working ROM to flash back to WM5 here.
ATTENTION:
It may happen get an error (like: cannot replace file, maybe in use, or similar)after running "Upgrade_ROM.bat".
No worries, in this case copy "EnableRapi.cab" and "Cert_SPCS.cab" to your device if not allready there and install them by clicking on it in File Explorer. Then re-run "Upgrade_ROM.bat" and it should work.
On my Charmer the ROM is stable without any problems. If you crash your device, its YOUR fault and own responsibility.
Please do not ask how to flash a ROM or where to find ROMs or programs, etc in this thread, see links above. If you are not sure what you do, its better not to do it.
If you find any bugs, please report.
Have fun
Ridingshark
---------
New Version Beta 3.2 is out.
Download Version Beta 3.2 at: http://www.file-upload.net/download-1113151/Charmer_Touch_GER_Ridingshark_Beta_3.2.rar.html
Pass is: wm6
ATTENTION – UPGRADE INFORMATION GENERAL and when you flash my ROM for the first time:
(German: ACHTUNG: Bei jedem UPGRADE und wenn Du mein ROM das erste mal auf Dein Gerät spielst).
Do not forget to Flash back to WM5 before you upgrade from another WM6 Version and read the HOW-TOs!!.
Speicherkarte/Storage Card Info - Wichtig: For System Compatibility to english Versions the "Speicherkarte" is called Storage Card in my ROM (as we often switch/test from english to German versions and v.v).
If you flash from a German WM5 ROM, you might have problems after restoring your personal data as "Speicherkarte" is named "Storage Card" (e.g. Installed Programs, etc.).
To solve this you can edit this registry item:
go to Taskmanager/RegEdit [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory] and change "Folder"="Storage Card" to: "Folder"="Speicherkarte".
But be carefull: If everything worked OK for you with "Storage Card" (e.g. you had an english version before) and you rename "Storage Card" to "Speicherkarte" later on, you also have to change all Registry References (Installed Programs, etc.) and Shortcuts to "Speicherkarte"!!
ATTENTION – UPGRADE INFORMATION FROM MY PREVIOUS BETA VERSION 3.0 (3) or 3.1:
(German: ACHTUNG: NUR wenn Du schon mein ROM 3.0 oder 3.1 auf Deinem Gerät hast).
An GERMAN upgrade Guide is enclosed with the RAR File (“Upgrade Anleitung WM6 ROM Beta 3.2.pdf”). Please read (Bitte unbedingt lesen).
There is one error in this file: When deleteing the COMM Destinations in my file you should go to "HKLM\Comm\ConnMgr\Destinations" not to "HKCU\Comm\ConnMgr\Destinations". This is important, if you have german and english COMM Info, you will have Problems setting up a Connection.
Changelog:
Changes Version 3.2
- Solved all bugs reported so far (reported until 21-04-2008)
- fixed SMS and WebMail bug (text was vertical or no body at all)
- Translated all reported to German (except 3rd party software as e.g. “Soft Key” and “Bluetooth Explorer” and “Filedialogchanger”).
- translated Pocket Office Templates to German (dotx. xmlx)
- added Filedialog changer.
- added Task Manger by "dotfred" (including a better Registry Editor)
- removed PHM Regeditor
- replaced Mobilcalculator (thanks to cyberdel)
- replaced pxl.exe (Pocket Excel) as there was an error
- replaced Batterystatus with new Version
- Windows Helpfiles will be installed after Hard Reset and can be de-installed by user (save around 1MB)
Changes Version 3.1
- Cube is working now (one wrong Registry entry detected)
- Hardware Buttons bug for Contacts and Calender (Button 1 & 2) fixed.
- All HTML Help Files translated to German now.
- All Settings reported by “Staubsauger” translated to German
- Folder “My Documents/TEMPLATES” removed, only “My Documents/VORLAGEN” will be there.
- Folder “Office Mobile” only once in “Startmenu/Programme” (Attn Staubsauger: The “Microsoft Office” Folder is from your Restore, I think – delete manually)
- Wireless Service Monitor back to ROM (as this is required for SDIO Wireless, also exists in WM5 – T-Mobile ROM)
- Links für Messenger und WLMLauncher added
- replaced German “folderview.exe” and lnk (in “\Windows” directory) - Displays the “Programme” Folder. Original HTC displayed wrong folder
- added settings.exe and lnk (in “\Windows” directory) - Displays the “Einstellungen” Panel
- removed WM5Torage. (install if you need, I dont)
wow great a new release. i am very happy, that in this release are non-usual-programs like wifi, voip, etc deleted to save memory. GREAT.
But is there also a new Build of Windows? Maybe you can cook it? Thanks anyways for the new release
Yummie, great work, ridingshark!
Excellent ROM without to much of the 'senseless' stuff in it!
Looking forward to your "base"-ROM!
@ridingshark:
Some "bugs"...
It seems that the 'Touch Cube' doesn't work! The Cube can't be activate by draging from top bar straight to the bottom but sometimes by touching one of the Softbuttons the Cube activates itself!
There are two Office-folders ('Microsoft Office' & 'Office Mobile')
There are still some non-german system-parts
[Start-Einstellungen-Persönlich-Telefon-PIN2 & More]
[Start-Einstellungen-Persönlich-Tasten-Lock]
[Start-Einstellungen-Verbindungen-Bluetooth-FTP]
[Start-Einstellungen-Verbindungen-GPRS Settings]
[Start-Einstellungen-Verbindungen-Network Wizard]
[Start-Einstellungen-Verbindungen-Wireless LAN] (Is this feature really necessary?)
[Start-Programme-Hilfe]
[Start-Programme-Kalendar] --> should better be Kalender
Anyway, great work!!!
Staubsauger said:
@ridingshark:
Some "bugs"...
It seems that the 'Touch Cube' doesn't work! The Cube can't be activate by draging from top bar straight to the bottom but sometimes by touching one of the Softbuttons the Cube activates itself!
There are two Office-folders ('Microsoft Office' & 'Office Mobile')
There are still some non-german system-parts
[Start-Einstellungen-Persönlich-Telefon-PIN2 & More]
[Start-Einstellungen-Persönlich-Tasten-Lock]
[Start-Einstellungen-Verbindungen-Bluetooth-FTP]
[Start-Einstellungen-Verbindungen-GPRS Settings]
[Start-Einstellungen-Verbindungen-Network Wizard]
[Start-Einstellungen-Verbindungen-Wireless LAN] (Is this feature really necessary?)
[Start-Programme-Hilfe]
[Start-Programme-Kalendar] --> should better be Kalender
Anyway, great work!!!
Click to expand...
Click to collapse
Hello Staubsauger *g*
Thanks for inputs. Strange, did not have any problems with Cube.
After hardreset i tested this, slided down and it started. I have it disabled in my Charmer (no need), but it should work.
Will check.
Thanks
Great work, best rom I think
But, I have the same problem with cube like staubsauger said. :/
TommyB83 said:
Great work, best rom I think
But, I have the same problem with cube like staubsauger said. :/
Click to expand...
Click to collapse
OK, think i have found the problem.
A bugfixed and extended version beta 3.1 for all above will come next week latest (hope)
Regards R
Very nice to hear this
Wish you best luck for the next version and hope it comes soon
German part:
Irgendwie verwundernd, dass man in nem Thread über ne deutsche Firmware in englisch schreibt, oder nicht?! ^^
Schön zu hören dass du an ner neuen Version arbeitest. Wünsch dir viel Glück für die nächste Beta, freu mich schon auf das ultimative Flash
*** german part included 'cause my not soo good english knownledgement
Yeah!!!
@ ridingshark: Great work!
Just a few things:
Using SKTools 4, I found one wrong link (it is a ROM-File, so no chance for me to correct it): "\Windows\Start Clean.lnk" referes to "\Program Files\Startclean\startclean.exe" instead to "\Windows\StartClean.exe". (see screenshot_1.jpg)
At the "Telefon"-screen there is "Contacts" instead of "Kontakte" (see screenshot_2.jpg) and the "Smart-Dialing-Options" are still non german (see screenshot_3.jpg)
btw: How long did it took you to cook this ROM? I would love to cook my own ROM but i haven't enough time to test, modify, test again, modify again, aso -> so i hope, that you will cook the ultimate german ROM for Charmer!
Some problems...
USB charging is not working
Time and date of text messages are not displayed correctly, the message body itself is alright
youser said:
Some problems...
USB charging is not working
[*]Time and date of text messages are not displayed correctly, the message body itself is alright
Click to expand...
Click to collapse
Yes, you're right! Haven't seen, that I've got the same problem with messages!
youser said:
Some problems...
USB charging is not working
Time and date of text messages are not displayed correctly, the message body itself is alright
Click to expand...
Click to collapse
Thats weird...
Strange.
1) USB Charging: After First use (Hard reset) please go to "\Windows" and Start "XDADev_BatFix.exe". This has to be done only once after Hardreset.
Reset and it will work
2) Will check what happened with Textmessages and try to post a bugfix until next revision.
Regards and sorry for troubles.
Hi there!
First of all: Great great work of yours!
I experience 2 kind of problems:
E-Mails (push, exchange, pop accounts) show no message body, only headers, recipients & attachments (though u can't open them)...
When retrieving data (mails, internet, active sync) the sessions don't end automatically, u always have to cancel them manually.
Does anyone struggle with the same stuff ?
Cheers, gustox
Hi gustox!
I also just found out, that email-accounts in p.outlook are not working correctly.
In fact, no message-body when opening a downloaded email (see screenshot_1 & screenshot_2).
(btw: YES, there IS a content in the mail shown at the screenshots!)
Don't see a problem with not-self-stopping-sessions! What do you mean exactly? The GPRS/EDGE connection? - IMO they never should end automatically, 'cause you're wasting data-volume (this shouldn't be really a problem) and there's no need for stopping it anyway.
Staubsauger said:
Hi gustox!
I also just found out, that email-accounts in p.outlook are not working correctly.
In fact, no message-body when opening a downloaded email (see screenshot_1 & screenshot_2).
(btw: YES, there IS a content in the mail shown at the screenshots!)
Don't see a problem with not-self-stopping-sessions! What do you mean exactly? The GPRS/EDGE connection? - IMO they never should end automatically, 'cause you're wasting data-volume (this shouldn't be really a problem) and there's no need for stopping it anyway.
Click to expand...
Click to collapse
Hello Guys, i dont know the heck what the problem is, i recooked all and no change for that. Did you use another German ROM before (e.g. mschmitz( and did you have similar problems?
Please report
thanks
Staubsauger said:
Hi gustox!
Don't see a problem with not-self-stopping-sessions! What do you mean exactly? The GPRS/EDGE connection? - IMO they never should end automatically, 'cause you're wasting data-volume (this shouldn't be really a problem) and there's no need for stopping it anyway.
Click to expand...
Click to collapse
Every 5-10 minutes it starts an internet connection just by itself.
I noticed it in the morning when the data session was like 7 hours or so!
Don't know why...active sync config is :
main time check: every 2 hrs
side time check: manually
GMX Account check: manually
Strange.
@ ridingshark:
That's my first wm6 rom.
Previous rom: TMobile Austria AKU2_0_Update AUT
cheers, gustox
@ gustox:
Have you checked the settings for HTCHOME-Weather? Maybe this is the reason for connecting every 5-10 minutes!?
@ ridingshark:
I tried several ROMS (vlodeck's & mschmitz') but never had similar problems. I think the main problem is with the "html-interface" of p.outlook.
Creating a new email, the message-body indicates a hyperlink to "Inbox:ReadBody editmsg" (screenshot_1 & screenshot_2). Following this hyperlink it creates an Error-message (screenshot_3).
Obviously this is the key!
Staubsauger said:
@ gustox:
Have you checked the settings for HTCHOME-Weather? Maybe this is the reason for connecting every 5-10 minutes!?
@ ridingshark:
I tried several ROMS (vlodeck's & mschmitz') but never had similar problems. I think the main problem is with the "html-interface" of p.outlook.
Creating a new email, the message-body indicates a hyperlink to "Inbox:ReadBody editmsg" (screenshot_1 & screenshot_2). Following this hyperlink it creates an Error-message (screenshot_3).
Obviously this is the key!
Click to expand...
Click to collapse
Yessss... You are genius!!
When i replaced the Help HTML Files i alos replaced this ones...
I will post a new ROM soon and mybe a bugfix now.
Come back in one hr!
ridingshark said:
Yessss... You are genius!!
When i replaced the Help HTML Files i alos replaced this ones...
I will post a new ROM soon and mybe a bugfix now.
Come back in one hr!
Click to expand...
Click to collapse
I'm just the kitchen help, you are the cook!
Staubsauger said:
I'm just the kitchen help, you are the cook!
Click to expand...
Click to collapse
Thanks agin for your input, that helped me saving hours.
Please install this bugfix (replaces the damaged html files and more german translations)
Please report if OK now.
Thanks
Dear all chefs,
i am sincerely hoping that one of you would be so kind to do a rom with asian regional settings support. For hongkong & taiwan, the wince.nls is close to 1.2mb. altering this will also requires alteration to the rom.
could any chefs be kind enough to help with this?
Panosha? DCS? Hangtuah?
thanks!
i tried xip porting with the large wince.nls, but after flashing, the device just hangs at the bootscreen, my map.txt does not shows any error and everything seems ok while porting, but it just doesn't boot. i hope someone could help me as well on this.
thanks a million.
are you trying to get a ROM thats in chinese, or simply supports chinese char display?
Up!
Hi, guys, I'm from China. First, thanks for your efforts. Many people including me would like a ROM with English User Interface, Chinese(PRC/Hongkong/Singapore/Taiwan) regions support and with Microsoft original input method (this is important for type using QWERTY keyboard).
im currently running ROMeOS with CEStar "green-ware " for chinese input using pinyin and handwriting (penpower). it is working pretty well
theclueless said:
im currently running ROMeOS with CEStar "green-ware " for chinese input using pinyin and handwriting (penpower). it is working pretty well
Click to expand...
Click to collapse
ce-star aint very compatible with some software.
personally, i am using a push email client on my touch pro. if alterating the wince.nls using ce-star or other software, the push email software will somehow behaves strangely. however, if the chinese regional settings are cooked into the rom, or rather the XIP, then everything will be perfect.
we do not need a rom with chinese display support as fonts can be installed by ourselves. but we do need a rom with asian regional settings support as what "imkow" has said.
thanks!
ruffruff said:
Dear all chefs,
i am sincerely hoping that one of you would be so kind to do a rom with asian regional settings support. For hongkong & taiwan, the wince.nls is close to 1.2mb. altering this will also requires alteration to the rom.
could any chefs be kind enough to help with this?
Panosha? DCS? Hangtuah?
thanks!
i tried xip porting with the large wince.nls, but after flashing, the device just hangs at the bootscreen, my map.txt does not shows any error and everything seems ok while porting, but it just doesn't boot. i hope someone could help me as well on this.
thanks a million.
Click to expand...
Click to collapse
i think we are trying to do the same thing altho my case is diamond in japanese.
i am facing the same issue. using bebe's kitchen with htc wwe rom as a base, even if i replace the original wince.nls by another wince.nls which supports asian language, the wince.nls in the cooked rom is the original one. i am not sure if it's the issue of rom or the kitchen because i could replace wince.nls in a polaris rom using the same kitchen. but i am not sure if the xip porting function in the bebe's kitchen is really working with this shipped rom somehow...
using kaiser kitchen, i can rebuild the dumped rom with Part01.raw, Part02.raw and the htc wwe rom without any errors, if i burn it on my diamond, it does not boot at all.
any suggestions or helps?
thanks.
qt
Alpha release of a WWE rom with asian region support
I will get a X05HT next week and want to find time to do the work.
Hope we can customize a new ROM based on [ROM][WWE] [02.12.08]PROven ROM 1.06 20759 MAX4G build - UNPROTECTED .
Here is some info about "How to replace WINCE.NLS" in Chinese. Thank pcg
CJK nls and fonts: e-china for Diamond (Japanese, Chinese, Korean, etc.). Thank asukal.
2008/12/07: Alpha release Please let me know your test result!
Sorry have no machine to test for next two weeks.
I will find time to write down the processes.
1. Prepare OS.NB.payload (xip.bin,OEM,SYS)
Be caution! A large WINCE.NLS may push out some modules!
Please make sure your new map includes all modules.
Here are last part of my new and old map.txt.
NEW map.txt
805e2000 - 805e2000 L00000000 Start: start of RAM
805e2000 - 805e3000 L00001000 initialized data of region_1 osaxst1.dll
805e3000 - 805f6000 L00013000 initialized data of region_1 kd.dll
805f6000 - 80690000 L0009a000 NUL
80690000 - 80696000 L00006000 uninitialized data of region_1 nk.exe
80696000 - 80714000 L0007e000 initialized data of region_2 nk.exe
80714000 - 80714000 L00000000 ------ start of RAM free space
80714000 - 83400000 L02cec000 NUL
83400000 - 83400000 L00000000 End: end of RAM
Click to expand...
Click to collapse
OLD map.txt
803e2000 - 803e2000 L00000000 Start: start of RAM
803e2000 - 803e7000 L00005000 NUL
803e7000 - 803e8000 L00001000 initialized data of region_1 osaxst1.dll
803e8000 - 803f0000 L00008000 NUL
803f0000 - 803f6000 L00006000 uninitialized data of region_1 nk.exe
803f6000 - 80474000 L0007e000 initialized data of region_2 nk.exe
80474000 - 80487000 L00013000 initialized data of region_1 kd.dll
80487000 - 80487000 L00000000 ------ start of RAM free space
80487000 - 83400000 L02f79000 NUL
83400000 - 83400000 L00000000 End: end of RAM
Click to expand...
Click to collapse
2. Edit xip.bin to replace WINCE.nls (real hard work).
3. Put "e-china for Diamond" to OEM.
4. BuildRom again.
It's kind of hard to do any cooking when no one's uploaded any asian (or Japanese for that matter) roms to base it on. Just putting the wince.nls in a WWE rom won't be enough.
You are right.
It took a whole day work for an Alpha release.
Hope PROven team does not change xip.bin in their next release.
flinx1 said:
It's kind of hard to do any cooking when no one's uploaded any asian (or Japanese for that matter) roms to base it on. Just putting the wince.nls in a WWE rom won't be enough.
Click to expand...
Click to collapse
Uploaded for you to play with. I only included par1 and par2 (that is all you need, apparently.
http://www.filefactory.com/file/21e5...5ht_pt1_p2_rar
Feel free to play with it. - if you DO want par3 then let me know.
I too don't like Ce-Star, when texting in the middle like some of the characters go off screen. I think t his would be cool too. But is there no way we can mod a current rom?
Why now just use this below instead CE-Star.
http://www.studiokuma.com/wm
It work well mostly on my Kaiser & Raphael . just need some bug fix but general its more acceptable than CE-Star for me and its free .
so what is the solution to add chinese caracters to display for translating from english to chinese. go overseas soon and want chinese to display on the phone when i try to communicate.
HackMimic said:
so what is the solution to add chinese caracters to display for translating from english to chinese. go overseas soon and want chinese to display on the phone when i try to communicate.
Click to expand...
Click to collapse
http://my.opera.com/cameron_en/blog/2008/02/03/ime-complete-installation-files-download-section
For display, use korechithai, for input ChinaFEP_No5en. Ignore the other files.
I prefer ruffruff's suggestion to cook a rom include Asian NLS and fonts.
Then you can add IME freely.
If you have a Asian xip.bin, you can cook freely too.
This is my goal.
Does anyone test my alpha release at #7?
Japan Support
I have the NTT DoCoMo HT-01A and use this add-on for Japanese support.
http://forum.xda-developers.com/showthread.php?t=445550
Are there any other DoCoMo users? If so, are you able to use the NTT data 3G network? I am having problems and wonder if I need to find a copy of the Mopera U dialer.
I use the exact same files for my Chinese need. It supports both Simplified and Traditional Chinese. Simplified is selected by default. Remember not to turn on ClearType in Landscape for TP due to a bug.
flinx1 said:
http://my.opera.com/cameron_en/blog/2008/02/03/ime-complete-installation-files-download-section
For display, use korechithai, for input ChinaFEP_No5en. Ignore the other files.
Click to expand...
Click to collapse
flippy_tv said:
Why now just use this below instead CE-Star.
http://www.studiokuma.com/wm
It work well mostly on my Kaiser & Raphael . just need some bug fix but general its more acceptable than CE-Star for me and its free .
Click to expand...
Click to collapse
I am using this with ROMeOS. Wroks just fine. Love it.
EDIT, because ROM-UPDATE
My second german ROM, based of original WM6.1 O2-ROM with german OS 5.2.21054
Features:
debrandet
new WM65-Manila-Theme
HW-Buttons configurable
without TomTom and Navipanel (I use my IGO8)
some other features like Welcome Center, aGPS removed
Thread and Download HERE
Nice work.
Did you change the language, or your based rom was already in German?
If yes, can you explain the OEM language change procedure, cause I want to make a greek one.
And how exclude tom tom? Everytime I did this, at the first boot configuration I get a tomtom cab doesn't exist error and any ext package after that error doesn't install.
not translated, it is a german rom.
i excluded all TomTom-cabs and change the config_ap.txt
;CAB: \WINDOWS\GoogleMaps-ms-htc_compressed.cab
;CAB: \WINDOWS\TomTom_Content_O2DE.cab
;CAB: \WINDOWS\TomTom_Content_2.cab
;CAB: \WINDOWS\TomTom_Content_3.cab
;CAB: \WINDOWS\TomTom_Content_4.cab
;CAB: \WINDOWS\TomTom_Content_5.cab
CAB: \WINDOWS\prar.cab
CAB: \WINDOWS\M2DConfig.CAB
CFG: \WINDOWS\config_end.txt
The blue section for installing PocketRar and ManilaConfig not works, now I must find out, why.
I found out, why the two cabs-installation not working. Certificate - problem.
Thanks for the tip.
mirko.prinz said:
EDIT, because ROM-UPDATE
My second german ROM, based of original WM6.1 O2-ROM with german OS 5.2.21054
Features:
debrandet
new WM65-Manila-Theme
HW-Buttons configurable
without TomTom and Navipanel (I use my IGO8)
some other features like Welcome Center, aGPS removed
Thread and Download HERE
Click to expand...
Click to collapse
hi Mirko,
thanks for your great work.! I have a question: Does a german Rom with the Build 6.1.21055 exist?
if "yes" do you have a link?
thanks
Morek
I don´t know, maybe, but not from me. Use 6.5-ROMs.
Greetings!