I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
First try to remove the battery and then put it back in and try to switch it on see if it boots into the windows...if not then follow the step given below...
Download any custom rom for OLD gene and run the rom update utility (RUU) it will be back to normal...
Note : Most importantly don't panic ...even if the phone is taking its usual time to boot up it may seem longer cos we are worried....have patience...
hay man
tell us the serial number of your device to tell you exactly what to do
is it (ht8xxx) or (ht7xxx) ?
it is very important
and for god's sake guys read the sticky threads first.
do not do anything before getting answers from other members.
Thanks guys, but I solve it already but I am not able to download any rom for my gene.
Can somebody give me another mirror apart from rapidshare and megaupload............. and which ROM is good, like with cube for my gene HTC 3400?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
Its normal thing that ur device got off after hspl.exe
it seems like u hv new gene....so now u should use Oref unbricker...
u just followed step 1....
so u should move on to step 2
which is unbricking gene by oref method
http://forum.xda-developers.com/showthread.php?t=472169
read this bro n follow instructions...
Thank you once again but I have solved my problem already. Now all I need is a new rom for my old gene.
Could anyone give me alternative mirror for any rom? Rapidshare and megaupload is not working for me.
Help - Gene stuck at boot loader after upgrading ROM 6.5
ONBL 1.07.0000
SPL 1.07.olip
GSM 02.79.90
OS 1.7.0.0
This happened when i upgraded the ROM from WM 6.1 to 6.5
Kindly help me how to restore my phone
same here
same happened to my Gene. I tried upgrading ROM to 6.5. after restart, it get struck on bootloader screen. it is not even detected by activsync
Related
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
londere said:
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
Click to expand...
Click to collapse
You might need to reflash it. Hold the two soft keys and then push the reset button. it will ask to hard reset. If the phone fails to come on after the hard reset, then hold the left 'ok' key and the power button, and then push the reset under the phone- this will take you to a tricolor screen where you can then re-flash the phone. try reflashing with official rom's, before using any other roms.
yes i do but it still in boot any sugest ipl 1.01 spl 1.40 olipro if any know how to update ipl with hard spl or how to remove hard spl it will be aprecible
My suggestion would be to try using sd to reflash the rom and see if that orks. format sd card making sure its fat 32 then put .nbh file in root directory. rename to herimg.nbh then insert into phone. go to bootloader and it should start the flash straight away. if this works make sure you upgrade spl to olipro 2.10 hard spl so its easier if there are problems. you can possibly upgrade spl this way too (get nbh file and rename hermimg.nbh). I tried this on my herme 100 and it seemed to work. it will flash the spl BUT when it restarts it will go straight to bootloader and start flashing again. as soon as it restarts get the sd card out and put on the os you want to flash. insert card and as long as you've named it hermimg.nbh it should flash new os with spl olipro 2.10. Good luck flashing.
You should read the wiki first : http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
your phone can be unbricked using the information on wiki.
only enter to bootloader the ipl dosent start also i fla**** but it stil apear spl.140oli whei in flash it with hard spl 1.10 and when i flash it with spl 2.60 oli it send me a error i try to flash it with qtek-cingular-doppod roms and nothing any suggest
any fu**ing suggest?
also it avoid me to update spl im stuck on hard spl 1.40 and ipl 1.04 i try to flash hspl 260-210 but it refiuses to stay in 1.40 radio 1.27 patched the ipl works but it frezzes with the green led dosent apear nothing
my device still blocked in boot mode i dont know if it is briked the device had the following info
ipl 1.04
spl1.40 oli
radio maybe no
os no
any suggest
any sugest to save my hermes
follow the unbrick guide link that koorosh_bsboys posted
it cant be unlocked its stuck in spl 140 olipro
did you follow the unbrick guide that koorosh_bsboys posted?
just stop trying any unauthorised ideas. let me know if i can help u. i have a friend in o2 service centre here in india. he can get ur device working. he does it by help of a software and 3 cables . it takes about 2 hrs. just let me know if u want ur device to work again
stil zombie my device im getting crazy any ideas
londere said:
stil zombie my device im getting crazy any ideas
Click to expand...
Click to collapse
If you want people to help you, you have to help yourself first!
1st of all, have you gone to read the Wiki as suggested?
2nd what methods have you tried to unbrick your device?
If you can't answer these questions then we can not help you, you keep asking for suggestions but you do not even reply to other's questions!
Here's a good place to start helping yourself if you haven't already http://forum.xda-developers.com/showpost.php?p=1465974&postcount=1
hi...
i hv HTC gene (HT8XX) (Old Gene)..
SPL 1.07.0000
ONBL 1.07.0000
right now i have stock WM5 Rom...
but last night i tried to flash WM6.1 fusion 9 Rom on my device..but
when i started RUU, everything was fine...but at last it showed
ERROR [300] INVALID UPDATE TOOL
history:
( previously i used same RUU to flash my phone....i was using Fusion 9.0 perfectly
but since i flashed wrong Rom so it bricked my phone....
than i gave my phone to HTC service center , they made it all right again..but they flashed stock WM5 ROM...
now i wanted to flash WM6.1 ROM but when i tried to flash than RUU showed this "ERROR [300] INVALID UPDATE TOOL" )
so....please tell me....what can i do to fix this problem ???
thanks in advance...!!! plzzz help
i think you are using wrong rom update utility...use the rom update utility that comes with the rom... and make sure that you are using the correct rom for old gene...which is your spl.
is it showing oref spl at tricolor screen then you must use jtag method......
go4thomman said:
i think you are using wrong rom update utility...use the rom update utility that comes with the rom... and make sure that you are using the correct rom for old gene...which is your spl.
Click to expand...
Click to collapse
dear.....i m using correct RUU as i used this RUU several times b4 i got my device bricked....
this problem is started after return of the phone from HTC service centre...
i hv tried almost all RUU which is available for gene..
and i also tried flashing almost 5-6 different roms...but same error all the time....i m using the same RUU which comes with ROM by default..
My SPL is 1.07.0000...
go4thomman said:
is it showing oref spl at tricolor screen then you must use jtag method......
Click to expand...
Click to collapse
i m using olipro method for hspl...
in which spl doesnt change...it just temporary unlocked for me..
it was working perfact for me...
i hv used almost every ROM available for OLD GENE..
but last time bcuz of flashing wrong ROM m device got bricked...
since than this problem started ..
go4thomman said:
is it showing oref spl at tricolor screen then you must use jtag method......
Click to expand...
Click to collapse
and..................i never got tricolor screen ....
whenever i hspl my device than phone reboots thn screen becomes white....thereafter...i used to flash ROM
everything is working well as usual upto white screen....
but at the time of flashing ROM RUU shows error....
hksin1988 said:
dear.....i m using correct RUU as i used this RUU several times b4 i got my device bricked....
this problem is started after return of the phone from HTC service centre...
i hv tried almost all RUU which is available for gene..
and i also tried flashing almost 5-6 different roms...but same error all the time....i m using the same RUU which comes with ROM by default..
My SPL is 1.07.0000...
Click to expand...
Click to collapse
Hey buddy, since you have given your ROM to HTC, they have again locked your CID, please go throught the stickey to how to flash again. Best of Luck
No Shaunak, there is something else wrong. He is saying that he tried to use the JumpSPL method. Its an alternative and temporary method to unlock CID for flashing ROM. HardSPL is different, it makes changes permanent.
Dear sksin
The phone is again bricked or you are currently using(able to boot) the wm5?
Dear hksin
Same problem i also have faced and finally i recovered it.
Please go through
1.The serial no. of the phone Is the sticker shows same S/N as before?
2.The HTC people has changed your IMEI No ?
If Yes then ,Now after comming from service centre your Gene has become the new Gene.
and you have to treate like this.
so do the gene unbricker solution by MTTY method and you may recover
All the best.Good luck!!!!
rkpatro said:
Dear sksin
The phone is again bricked or you are currently using(able to boot) the wm5?
Click to expand...
Click to collapse
dear..
I m currently Using the Phone With WM5 Stock
its not bricked and working perfactly..!!!
rkpatro said:
Dear hksin
Same problem i also have faced and finally i recovered it.
Please go through
1.The serial no. of the phone Is the sticker shows same S/N as before?
2.The HTC people has changed your IMEI No ?
If Yes then ,Now after comming from service centre your Gene has become the new Gene.
and you have to treate like this.
so do the gene unbricker solution by MTTY method and you may recover
All the best.Good luck!!!!
Click to expand...
Click to collapse
Dear rkpatro,
i hv checked IMEI no of phone ,,,its is same as previous..
and can u please tell me that how to check my phone's serial no. via phone only.
bcuz on the phone's box its serial no starts frm HT80XXX
but i found no way to check serial no frm the phone to confirm.
is ther any way ??
Remove the battery and you will be able to see the serial number. Please check the stickey by krazy. Now Old ROMs are appearing with 8xxx serial numbers!
Looking at your spl version, i could be wrong but I think yours is an old Gene
Addicted2xda said:
Remove the battery and you will be able to see the serial number. Please check the stickey by krazy. Now Old ROMs are appearing with 8xxx serial numbers!
Looking at your spl version, i could be wrong but I think yours is an old Gene
Click to expand...
Click to collapse
yeaa my phone has serial no starting form HT8XX
but it always works as old gene.
as before breaking my device , i almost flashed all the ROMs available for Old gene.
but mistakenly i flashed Krazy's Rom, cuz i thought tht my phone is also HT8XX
but later on i understood that my phone's SPL is 1.07.0000, which is for old gene..
anyhow my device became unbricked....but unable to flash the same Roms which i flashed in past...
so i m confused that wht is wrong with the device now..
i think that HTC guy has put some kinda Lock for flashing .. is that it ???
or is ther some other reason..
As dear rkpatro suggested that after returning from service center is has become new gene, but i am not satisfied with this . becuz everything is same as past time...
SPL n ONBL r also same as well as IMEI and serial no, even they flashed exact same ROM as it had previously..
so i m not getting that wht the problem is..
becuz everything is same , than y the Roms r not working..
i hv tried each Rom again which i was using in past...
but flashing ends up by error 300..
so guys,,,, please think something abt it...
ur attention to my problem is always appreciable....
thanks in advance..!!!
Yes, HTC has again cid locked your device, I think it should be better to get help from the krazy's sticky post on flashing a locked Gene.
Best of Luck
Black metal rom, p3401 can?
I'm having problems.
All the ROMS are giving p3401 error and my machine is only on screen color.
my SPL is 1.10. olip
someone can help me
rom or tell me what works?
Addicted2xda said:
Yes, HTC has again cid locked your device, I think it should be better to get help from the krazy's sticky post on flashing a locked Gene.
Best of Luck
Click to expand...
Click to collapse
Hi dear...
just wanna know.....that when i firstly flashed my device, than i used olipro's spl method
1.10-Olipro.nb
and Jump slp
that time my device was CID locked also, but i succesfully Flashed WM 6 Rom by this method/..
no error was ther..
now as u r sayin that its again CID locked.. so i followed exact same procedure as i followed for the first time....but this time i ended up with this strange error...
so....is ther any possibility of something else ???
solution ???????????????????????
Any Solution guys ??????????????????????????????????????????????????????
problem Solved...!!!
finally..............my problem has solved,,,,infact....my old gene has become new gene now....isnt it miracle...
nyways....even being onbl n spl 1.07.0000 originally....i successfully patched my device with hspl for new gene...and i installed Sumit's VanillaManila ROM ( for new gene)...
its working superb....thanks...!!!
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse
Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
ur device is still under warranty period??
Try to unbrick again from orefkov method if it works GREAT! otherwise take ur device to service center and dont tell him about cracking and just tell him that it automatically switched off...
dont try anything without suggestions of other GENE forum members..just ask them too what to do..?
If you are getting to Bootloader with olip spl. orefkov method should work. BTW, How did your Gene work with both Old and New Gene ROMs???
AND WHY DO YOU NEED TO POST THE SAME QUERY WITHIN FOUR MINITUES?
IF YOU ARE IN SUCH A HURRY, BEST PLACE IS THE SERVICE CENTRE.
Addicted2xda said:
If you are getting to Bootloader with olip spl. orefkov method should work. BTW, How did your Gene work with both Old and New Gene ROMs???
AND WHY DO YOU NEED TO POST THE SAME QUERY WITHIN FOUR MINITUES?
IF YOU ARE IN SUCH A HURRY, BEST PLACE IS THE SERVICE CENTRE.
Click to expand...
Click to collapse
cool down addicted...he is just embarrassed....
vikas _khatri1981 said:
Dear Senior members,
I am new user of Gene 100( New) verified from both method SPLcheck ,Olipro and Orefkow Method and found that It's new gene n udated it's SPL..
Then i update my WM6 Rom to Sumit's Pro User ROM ( WM 6.1 for both Old and New Gene).
It worked fine.
The by mistake I click the file gene_hspl.exe ( The file using for Updating SPL for Old gene).
immediatly My phone got off.
i tried a lot to switch on it .
then I push cam key with soft reset key, then my phone on in boot loader mode with SPL 1.10.olip
and
ONBL 1.17.0000
Now i am Not able to update to my SPL again.
and Phone is not working, What should i do now..?
Should i Update SPL again or anything else.
I tried to update Newer ROM ,But message come with Error(300) Please get newer Update Utility for ur phone.
Kindly Solve out my Problem
Click to expand...
Click to collapse
jsut update ur spl by using spl for new gene.
this will do