Is there a belt holster for the Shift?
Thanks for making my day buddy.
I got a good laugh.
Not that you can't or shouldn't have this monster attached to your hip I just think it would look pretty funny.
Actually it is not a bad idea to custom make one from your local leather shop , choose your own material , color , design , pockets , and then ask the maker to do a holster stlye case for u , it's unique - one in the world and most importantly , it will suits your daily working enviroment and usages . Don't care about what others say or think , just be practical and leather is the best material there is - no other is more classier than it . I don't care others staring at me when i answer my calls on speaker phone holding my shift slide closed with one hand , well it is definitely the largest wm phone device there is u can find and hold ! Ha ha ha cheers and best regards - jimmunsw
you canbuy some of thoes passport belt bags etc used for trips and have shift in it.
Related
I’d like to know what you all think of our latest release. Any suggestions and/or comments are welcome. The 4 bracket design is new so I’d like to hear your thoughts on it.
Thanks!
Compatible with the following models:
O2 XDA III
O2 XDA IIs
MDA III
Qtek 9090
iMate PDA2k
iMate PDA2k EVDO
Audiovox PPC 6600
Siemens SX66
$34.95 Case Only
http://tinyurl.com/6448j
$50.35 Bundle Deal
*JAVO LeatherCase + JAVOScreen + JAVOSync (black)*
http://tinyurl.com/4h8yb
- Alan from JAVOedge
Looks good
Will there one of those funky skins soon too?
The way it holds the Device looks very good.
But you have made the same mistake as proporta with the magnetic strap You put it on the back so it acts like a really annoying claw on top of the device. When you take a call it really gets annoying as it first tries to cover the speaker when you put it to your head. Then after you have moved it out of the way it rubs on your head getting even more annoying.
IMO it would be better to have the strap on the front panel so it then fixes on the back (just like original XDAII case). This gives a lot cleaner look on the front and stops the annoying claw effect.
sparkyxda said:
Looks good
Will there one of those funky skins soon too?
Click to expand...
Click to collapse
Hello sparkyxda,
a JAVOSkin (with strap) is coming in the near future, but unfortunately we do not have an ETA at this time. So please stay tuned!
Dingo said:
The way it holds the Device looks very good.
But you have made the same mistake as proporta with the magnetic strap You put it on the back so it acts like a really annoying claw on top of the device. When you take a call it really gets annoying as it first tries to cover the speaker when you put it to your head. Then after you have moved it out of the way it rubs on your head getting even more annoying.
IMO it would be better to have the strap on the front panel so it then fixes on the back (just like original XDAII case). This gives a lot cleaner look on the front and stops the annoying claw effect.
Click to expand...
Click to collapse
Hello Dingo,
Thanks for your awesome suggestions and comments! I do agree with you on the strap, I will forward this to our product manager and bug him some more about the strap issue
I will keep an eye out for a new version :wink:
Javo said :
>I’d like to know what you all think of our latest release. Any suggestions >and/or comments are welcome. The 4 bracket design is new so I’d like >to hear your thoughts on it.
>Thanks!
>http://tinyurl.com/6448j
I really like the four bracket design but the magnetic closure is a pain - I'm never confident about leaving one of these near my wallet!
Does anyone have any pics of the device in the actual case?? Javoedge you know that alone would help people make up their minds.
also can you slide the keyboard out with this case?? include pics of that also
Hello everyone,
Thank you for your inquiries.
I believe the review of this case linked below will answer most of your questions.
http://www.clieuk.co.uk/gavincase.shtml
Please do let me know otherwise.
Thank you!
ProphetX said:
also can you slide the keyboard out with this case?? include pics of that also
Click to expand...
Click to collapse
I am afraid the keyboard cannot slide out while inside the case.
I apologize.
since you are asking our advice maybe you could give us a discount?? :lol: then it might get around the board a bit more :lol:
As well as looking smart, for my money a case must protect your device. It would appear from the pickies that the top left and right corners aren't protected (certainly not with any wrap around from the case). My XDA2 was seriously damaged after I dropped it - it inevitably landed on the top left corner and the on/off switch would no longer function (case cracked too). The aluminium case looks as if it would do the job (sorry to report that I bought a Proporta ally case - but only for the protection offerred - not for its looks). Fuctionality is also better with the ally case - I can use my phone and any other button assigned programmes without having to open the case. I would still much prefer a leather case if it offerred protection.
robboy said:
since you are asking our advice maybe you could give us a discount?? :lol: then it might get around the board a bit more :lol:
Click to expand...
Click to collapse
I will go ahead and contact the admins here to see if they are interested in running a contest for some discount coupon codes.
robboy said:
since you are asking our advice maybe you could give us a discount?? :lol: then it might get around the board a bit more :lol:
Click to expand...
Click to collapse
really, this is pretty much like a "small group survey" ... in marketing jargon
Not good case. protectionand accessibility. This case have 80% protection and 0% accessibility. I need to open front cover to access the buttons and make a call. Who need a credit card slots in PDA case? I think so far most successful case is Brando. If you would make the same idea but with transparent front, your case will beat up every other models, because is no any really good one on market today.
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
because it is nothing like it is on the picture
it is not a a belt clip case, it is some kind of "wallet case"
so i search and search....
the only cases that seems to feet is all the universal cases
but no one seems goog enouth
and seem to be imposible to find some horizontal belt clip case
so here is my find
http://www.noreve.com/category/PC+d...tui_cuir_universel_PDA_-_Large_Tradition.html
good quality
just a little large for the p6500, but good
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
so if some of you find something better, don't forget to share !
regard
Years ago compaq used to make an expandable fabric case for the 36xx ipaq. I still have mine and it fits the p6500 perfectly. I don't know if it's still possible to acquire it.
Ultimate Sedna Case
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
kwburress said:
I purchased one of these babies a month ago for my new Sedna and LOVE IT!!!!!
http://www.pielframa.net/htc_p6500.asp
Picture shows a brown color case, but it's available in black
Made in Spain
Can't speak highly enough of the quality
Highly recommend
Click to expand...
Click to collapse
The P6500 has a bit rounded backsight, so if u tap on the display the HTC waggles. Is this problem solved with the PielFrama?
axle7517 said:
i was look for a good case with belt clip
so i bought the official htc case for P6500 on Htc/expansys site
and .. send it back
Click to expand...
Click to collapse
So did I ... also bought/sent back numerous other cases that were either too big or just plain garbage
axle7517 said:
i would like some case that feet the P6500 well , horizontal with belt clip
so until it comes out, this one will make the the job
Click to expand...
Click to collapse
I finally found & bought one of these from PDAir
They do two or three of them but this one was what I was after, just something to carry it around & clip on me belt
I have one of the ones that kwburress wrote about and found it to be an excellent piece of workmanship, but, I also found that PDAir have some aluminium cases which are handy as well. Thanks to both Prospro and kwburress for their input...
http://www.otterbox.com/htc-cases/htc-p6500-cases/htc-p6500-defender-case/
we use the otterbox, it's great if you need a rugged case for ultimate protection.
I've had my shift for a few months now and I haven't bought a shoulder bag for it yet only because I was looking around for a particular bag, something like a gun holster that would fit right underneath the arm. Unfortunately, they don't make holsters like this for the shift (they should because I would buy one haha).
So I'm here asking what type of bag are you guys using with your shift? Links, pictures, experiences would greatly be appreciated. Thanks.
labnotes said:
I've had my shift for a few months now and I haven't bought a shoulder bag for it yet only because I was looking around for a particular bag, something like a gun holster that would fit right underneath the arm. Unfortunately, they don't make holsters like this for the shift (they should because I would buy one haha).
So I'm here asking what type of bag are you guys using with your shift? Links, pictures, experiences would greatly be appreciated. Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=374137
Ladies might like this one: Coach Planner. It fits perfectly inside once you remove the address book. Use velcro dots to keep it in place.
Why not custom make to your own leather bag , just go to your own local leather makers , u can choose the type of leather - soft , thick , color , finishing , also the design - holster , shoulder , backpack , hand carry , pockets , any design u want . U will be surprised how nice it will look and also it will fits your daily usages with it . It may cost a bit more or double - depends on the design , material and so on , but it is worth it because it is the only one in this world ! So be brave and explore this , thks and best rgds - jimmunsw
hey guys and dolls, I am on a hunt to find the best case possible. I have a few very important features that must be met, they are:
Protection (obviously, lol)
must be sleek
not to bulky (don't wanna carry a brick in my pocket)
function (heard some cases cover the proximity sensor)
also would like the option of a kickstand (not gonna make or break a buy however).
I have read what several sites claim to be the "best on the market", however I find it really helps to get the input of actual users and not just the company selling the product (who obviously wants all the cash they can squeeze from you).
TIA
there is something called "bodyglove" it has a kickstand too i think. never tested it because its not available in european stores. so i never tested but it looked more than good to me in quality.
additional search for silicon cases - yes they really exist and you can still move your keyboard and its while keyboard is moved out still fully enclosured.
these silicon cases way better most time than these plastic (crystal) whatever cases out of ebay or such (i bought a lot).
the notches break after three times of removing the casecover (for pressing reset button). also its making nasty scratches on your chrome surface when a bit dirt is in between the phone and the case.
so pay for a good leather case (and thats not very handy most the time) or use a sleek silicon case (u never have to think about removing it out of a case for fully using your rhodium) it feels a lot better in hand and stays in place when you put it down on your desk in oyur car or whatever.
thanks buddy. I will for sure look into the silicon cases. my brother actually has the bodyglove for his Hero, but he does nothing but complain about it, lol.
sadly in the US we don't (or at least Sprint don't) get the beautiful Chrome back for the Rhodium. I have the "Millenium Falcon" battery cover. Though I would love to case mod my Rhodium to make it look sleek and slicker.
Thanks again for the words of advice.
My wife and I teamed up and made a leather case for my G-Tablet. Turned out pretty good. Used an old second-hand leather jacket that was given to me years ago for free that I never wore, a book from work that somebody was throwing away and cut it up for the covers, and a little elastic we had laying around. We had enough leather from the old jacket to make two cases actually, and I am finishing the second one. I used a downsized 3 ring binder for the second one and it will be nice also. Here are some pics of the first one...
Wow, that looks really, really good. I'd buy that if it was available lol.
Nice work, looks classy.
Looks good
Thats a good idea. Nice
Thanks for the comments! It is holding up well with daily use. Her idea to put the seam across there. People see me carrying it now and have been asking me "Is that iPad?" Then I say what it is and open the case...which always seams to lead to people having no clue that there were other viable tablets out there. Then I show em the speed and interface and tell them the differences, and they are usually wondering why iPads cost so much more... BTW - I sold my new 4th gen iPod touch to buy the G-tablet and have not regreted it
Good job!
willyc32 said:
Thanks for the comments!....................................... ..................................................................................................................................................................................................................................................................................................BTW - I sold my new 4th gen iPod touch to buy the G-tablet and have not regreted it
Click to expand...
Click to collapse
Love this part
Great Leather case too!
Very impressive, I just wish I was a better tailor. How many hours did it take you for each?
Wow, that is very nice. You guys got skills! Maybe beter then my nunchuck skills...
Great Job. You should look to mass produce it. I would get one too.
Looks nice
Wow, I had to resurrect this thread. That case looks super cool. I'm sure you don't have a lot of time on your hands, but would you mind giving me/us a brief Tutorial on how to make one? I would really love to try it out.
Thanks,
Scott
Now that's some Suzy Homemaker gangsta sh*t right there! LOL
I have trouble sewing a button onto my shirt. Nothing but props.
That is so awsome! Not only do you have a personalized cover you can be proud of, but you reused something that were otherwise useless. Its green and classy!
how much leather do you think you used?
I wonder if he sold his tablet. No responce yet :-(