hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
My Raphael doesn't go forward from the align screen since I hard reset on Mystic 6.5 lite ROM. Now I have tried all stock ROMS with the same problem. I Will try to best describe the problem in a chronological order.
1. Had stock ROM latest with TF3D2
2. Flashed to Mystic ROM 6.5 lite, took three cycling of align screen to get through
3. After 24 Hrs lock screen got stuck, no sliding action worked,
4. Performed soft reset, phone boots up to lock screen again.
5. After several tries decided to hard reset
6. Normal boot up until Align Screen, The align screen markers keep rotating on tap, but doesnt pass through to home screen or customization.
The phone connects to active sync, and I can synchronize, flash roms normally.
I like to think that 6.5 ROM changes some screen sensitivity settings, and this is not allowing the screen to align normally. Somehow these settings could be stuck,
I request one of you experts to guide me in getting my expensive phone back. FYI, I have no warranty, I am not even in UK, I have purchased this phone over Ebay, I have flashed around 15 ROMs since my 2 month ownership of the phone, with no problems.
create an empty file called welcome.not and place it on your sd card then hard reset
welcome.not
Warjcowski said:
create an empty file called welcome.not and place it on your sd card then hard reset
Click to expand...
Click to collapse
Done that and it successfully skips the alignment section...but.....
It now recognises touches but The touch screen takes wrong inputs, some times it doesnt, how can I recalibrate, without going into align screen, or can I go there too??
Where do I go from here
sandandrocks said:
Done that and it successfully skips the alignment section...but.....
It now recognises touches but The touch screen takes wrong inputs, some times it doesnt, how can I recalibrate, without going into align screen, or can I go there too??
Where do I go from here
Click to expand...
Click to collapse
here are a few links and misc info. Unfortunately development was stopped since calibration wasnt perfect, but its worth a shot.
http://www.wmexperts.com/align-your-touchscreen-automatically
http://forum.xda-developers.com/showthread.php?t=473976
Cab location (post 45): http://forum.xda-developers.com/attachment.php?attachmentid=149596&d=1232741513
(post #48) Try editing this reg:
HCM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData
values: 485,500 785,171 785,820 193,820 188,175
Hi, if the align screen markers are not accepting your input, it is more than likely something is interfering like a screen protector or case putting pressure on the screen. (or a digitizer failure)
the only reason it would not accept the inputs is if the data it's receiving is too far from the actual point of the crosses.. it makes you keep cycling through until it's within a level of tolerance..
Warjcowski said:
here are a few links and misc info. Unfortunately development was stopped since calibration wasnt perfect, but its worth a shot.
http://www.wmexperts.com/align-your-touchscreen-automatically
http://forum.xda-developers.com/showthread.php?t=473976
Cab location (post 45): http://forum.xda-developers.com/attachment.php?attachmentid=149596&d=1232741513
(post #48) Try editing this reg:
HCM\HARDWARE\DEVICEMAP\TOUCH\CalibrationData
values: 485,500 785,171 785,820 193,820 188,175
Click to expand...
Click to collapse
Thanks for that ready info, really appreciate it.
Though it does give me some promise, but as you know I cant use the touch screen accurately, so installing a cab or changing the registry is near impossible scenario, unless those can be done via a computer. Right now, wherever I click on the screen, the notification area comes up with battery, network strenght info etc.
Do you know of any way how we can clean up the entire TouchPro (waever it means) and make a new flash. I presume flash does that, but then again I think there is some leftovers from previous ROM, as mentioned in the "Flashing your first GSM ROM" sticky, where it is recommended to hard reset immediately after flashing.
All your help required to save the phone and my money going down the drain. It just hurts that I was so much in love with this phone, since using Wizard for 3 years. Cant bear to lose this fight.
Da_G said:
Hi, if the align screen markers are not accepting your input, it is more than likely something is interfering like a screen protector or case putting pressure on the screen. (or a digitizer failure)
the only reason it would not accept the inputs is if the data it's receiving is too far from the actual point of the crosses.. it makes you keep cycling through until it's within a level of tolerance..
Click to expand...
Click to collapse
Thanks DA_G for considering to help me overcome this.
At the moment I have no screen protector on, I had one on for two weeks, and as it wasnt a good fit and collecting dust underneath, I threw it out arnd 2 days back. I have always used the normal sleeve case from HTC.
If you say there is no other reason for this behavior other than hardware issue, then I have no options left. You mention that the digitizer may be broke, couldnt it be that the software part of the digitizer is broke and we can rectify that.
After using wizard for three years, and that too very roughly, I have like dropped it several hundred of times, and not facing a problem, I refuse to believe HTC quality has dropped down so low. This touch pro was used most carefully for arnd 2 months only.
I still ask you to give me more options before going for hardware replacement. As of now I will remove welcome.not, hard reset and try aligning as long as I can bear it.
hi you should be able to use the keypad to cycle through... is it? i use to have tytn II. so u can install the fix or do a reg edit with it.
gaiden said:
hi you should be able to use the keypad to cycle through... is it? i use to have tytn II. so u can install the fix or do a reg edit with it.
Click to expand...
Click to collapse
I have tried it with the keypad, unfortunately, it doesnt work as well as one would want it to ,,,,unlike the wizard I had.
The biggest problem you face here is to click the left and right soft key commands like OK, UP.
Wizard had the hardware keys for that as a fall back but not here.
I am at my wits end,.....wasnt that long!
Look up Pocket Controller @ Handango (it's expensive, but the demo's great). It allows you to run your ppc remotely. It has a pretty trick regeditor. It's a high octane version of active sync. You can probably align the screen with it (Settings>System>Screen). It shows you a big pic of your touch pro screen on your pc, and you can click things with your mouse.
Farmer Ted said:
Look up Pocket Controller @ Handango (it's expensive, but the demo's great). It allows you to run your ppc remotely. It has a pretty trick regeditor. It's a high octane version of active sync. You can probably align the screen with it (Settings>System>Screen). It shows you a big pic of your touch pro screen on your pc, and you can click things with your mouse.
Click to expand...
Click to collapse
Well I didnt try that but I used the My Mobiler, well the catch is you cant align your screen using these softwares, you can do all rest, install cabs everything, except align screen.
I believe the hardware digitizer has given up on me, I have just dropped it at the service center, who will ship it to another one, then they will quote for the repairs. So i keep my fingers cross until next week and see how they try to rip me off.
Did you revert to stock rom, radio and spl before you took it in? I hope so.
Farmer Ted said:
Did you revert to stock rom, radio and spl before you took it in? I hope so.
Click to expand...
Click to collapse
I reverted to only stock rom and radio, not the SPL.
As it is I havent given it in warranty, so I assumed it wont effect either ways.
It's weird you started having the problem after you removed the screen protector. Why did you remove it? Did it come off easily, or did it stick a little and give you problems? Do you think you might have messed up the screen when you were taking it off?
Farmer Ted said:
It's weird you started having the problem after you removed the screen protector. Why did you remove it? Did it come off easily, or did it stick a little and give you problems? Do you think you might have messed up the screen when you were taking it off?
Click to expand...
Click to collapse
I dont think that my removal of screen protector could have hurt the screen. As it is the screen protector was stuck on loosely.
The protector I had was a little hard kind and thick kind as opposed to the usual thin layer. I really didnt like it.
I am still of the opinion that WM6.5 rom had changed the sensitivity or some other parameter of the screen to an extent where the hardware couldn't cope. As I first faced the problem with align screen repeating 3 times when I installed that.
Within 24 hrs my digitizer had given up on me. Hence I think, if I the ROM can be completely sanitized and then flashed, the digitizer should work.
I am in no way an expert on these things, but I am just trying to apply some logic.
T Mobile MDA IV Screen Calibration Data
Can some owner of TMobile MDA IV mobile give me the screen calibration data from the registry.
It can be found at
HKLM > HARDWARE > TOUCH > CALIBRATION
I will be most thankful
HTC Fuze Alignment issue
Okay I have an HTC Fuze right, and I did a hard reset on it because the touchscreen was freezing, and working in only certain parts of the screen, so now Everything seems good with the touchscreen except the align screen part.. itwon't let me go past this stage, and Ive been at it for 2 days so can someone please help me out with my issue, I would sincerely appreciate it and thanks.
Dude, there is nothing much that you can do. There are ofcourse ways to skip the calibration screen and get to the desktop, but the functionality of the screen is allready gone.
If you are lucky enough to have a warranty for the thing, its time to use it now !!! If not, then start budgeting for a new phone.
As I didnt have a budget, I am using the phone in this condition since around a year and now thinking to replace it with Nokia N900.
Qeustion
My HD screen is off, and i cant seem to get it on again.
I just was working on it 1hour ago, took it out of my pocket and see that i have no screen.
Rebooted the phone, but no succes .. i see the screen turning on, but it light-gray (backlight) but no actual info/colors etc, also tryd a soft reset, no succes.
I have the Energy ROM Com5 build from 8July with the new 2.12 radio rom.
Could it be that in some way the screen died?
Hope someone can help me, im @ work now so i cant connect it with the PC.
When im home im planning to reflash the device ..
Thanks!
Weird
I just pressed a button and the screen turned on, and the colours/info just slowely fade away ... weird.
Could it be that the touchscreen is not oke anymore?
Or could it be a problem in the radio/rom i use? (and therefore a reflash could fix this?)
Hope its a easy sollution, otherwise ill be flashing it to stock and get it fixed by HTC.
Very very strange.
It seems to work again.
Anyone think i should reflash it to stock and try get a new one?
Are these signs of a screen going defect?
I dont know, first phone for me with touchscreen.
I would suspect a faulty screen, if it is still within warranty i would deffinately get a new one, however yes, try going back to stock first, see if it helps, it may be just a bad flash.
screen problem
I've had this and similar problems with my HD2, now on the 5th replacement from HTC in just 6 months of owning the phone. I also had the same problem on my HTC HD previously. Press the power key and just the buttons at the bottom light up but no response from the screen. Also had exactly the same problem your experiencing where you can faintly see the screen but not lit up. Flash it to stock rom and return to HTC for repair.
BEWARE!!! take some pics with date stamps of your handset before returning. They sent me 3 handsets all with the glass front panel not fitted correctly. Check the return handset carefully, you should be able to feel a lip between the casing and the screen as the screen is set a fraction lower than the casing. THis should be uniform all around. They tried telling me that i had damaged it myself despite calling them as soon as the handset had been delivered back to me.
micky9869 said:
Press the power key and just the buttons at the bottom light up but no response from the screen.
Click to expand...
Click to collapse
That's 'sleep of death', which affects loads of htc devices.
Oke i will stock it soon and return for repair.
I think its idd a screen problem, cause when the screen isnt functioning anymore, and when i put my ear on the glass, i hear a little squishing sound, like air is escaping .. it doesnt do that when the screen shows info/colour.
So, this thing drives me crazy...I've tried everything I knew and still nothing solved this problem.
I'm using HTC One. About 10 days ago weird things with touch started to happen. It seems that touch is partly unavailable/unresponsible on touch in one or two small areas. It seems to me like theres an empty place on my touch. Visualy is everything fine. Screen is crystal clear and has no damages or scratches. But I can't slide icons without troubles. Somwhere on 1/4 of screen, touch brakes briefly and I need another try to slide the icon. The same thing happens with status bar on the top of screen - I can slide it until that 1/4 part and it stops there and goes back. If I slide it quick with short move, it works fine, just slide alone over problematic area.
Also, few times I had that problem where screen works things on itself will. Makes pictures, or adds filters on Instagram, or, I don't know, just jumps around for few secons. Then, I lock the screen, then unlock it and usually that calm down the screen.
Also weird thing is that, when I want to send message, I can't reach "send" button in first try. I have to drop down writing sheet, than to touch the letters to put it in writing mode again, and then I can click the "send" button. On the same place where it was previously!
At first, I thought that plastic case or PVC protection is the problem, so I took off the protector from the screen. That solved problem for a bit. Then, I put back screen guard, and problem came back. After I totally rejected screen guard, problem is still here. I've tried to reset phone on factory, but that wasn't helpfull...
I forgot to state that I'm using Android 4.2.2 and this started to happen after that version update. I had no problem before.
So, now I'm here, as I don't know what else to do before I take this beauty to service. I just hope that this happens because of software bugs :crying:
Is there anyone who could help me? Have similar problem or know how to fix this?
In the meantime, I'll just hope that 4.3 will fix it themself... :fingers-crossed: