Related
anyone get the error message of unknown device when plugging in their wm 6 phone to a laptop, happens to me on vista homepremium and xp, both up to date. this happens about %50 of the time
I bet your USB port on the laptop is not supplying enough current (borderline, hence why it works sometimes). Try one of the following things, first try the connection while the laptop is on AC power (not internal battery). Second, do you have a double USB port adapter? This is a cable that plugs into your external USB device on one end, and has a Y-connector that plugs into 2 USB ports on your laptop, thus increasing the current capability. If either one of these suggestions solves the problem then it means the laptop is not able to supply enough current on one USB port, a common problem.
I had the same problem and found it to be a firewall issue
Ofcourse it could be a firewall issue or any issues with loading of drivers and services. A soft-reset on the device and a PC Restart will solve most of the case!
Regards,
Carty..
How would a PC Restart make your firewall accessible, I located the SmcGui.exe (symantec) created a shortcute, and use that to disable to firewall whenever I want to connect
paulnoise said:
anyone get the error message of unknown device when plugging in their wm 6 phone to a laptop, happens to me on vista homepremium and xp, both up to date. this happens about %50 of the time
Click to expand...
Click to collapse
hi guys thanks for the advice, however, i have since updated to vista ultimate and now get the following issues. xp seems to have sorted itsself out, however vista has problems installing the drivers for my phone. it says on the phone check usb cable and on the laptiop i get the symbol in the sys tray for unrecognised device. the phone will sync fine, just not allow internet sharing.(i am using a 2.0 usb port and my mobile device centre is up to date, i downloaded all the vista updates today)
my firewall has been turned off, but i believe its a driver issue as thats whats showing on the screen device not recognised.
any ideas?
For Internet Sharing in Vista, you need to install WMDC.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
i have it installed, i tried changing from official rom to black satin and a few others and it still does the same. the mobile device centre will sync then i turn on the internet sharing and it installs the drivers for "unknown device". had a word with the t-mobile connectivity team who took a look at the laptop and phone, tried it on other laptops with the same result. vista doesn't like the internet sharing bit. tried the usual stuff like taking off the advanced network functionality etc.
oke here is what u gotta do :
for windows vista:
-reboot computer without wm6 device connected
-install mobile device center 6.1 (the drivers ^^)
-reboot
-wipe all activesync connections on wm6 device and vista
-disconnect device and see if advanced networking is enabled (USB to PC .. in networksettings wm6)
-set connectionssettings in mobile device center from automatic to Internet
-goto networksettings on wm6 device and choose connections
-tap advanced and select networks : both set to My ISP
-connect wm6 device and wait till it finished .. take some minute or so
installing drivers and things
-when its done unplug device and reboot computer (yes again, and i am not
going to explain why this is so important as you should know by now)
-wait for the computer to boot untill it finished (vista this take 2 minute at least)
-connect wm6 device and setup proper sync partnership
-goto connectionsettings in mobile device center and check all boxes and set it to internet if it is not allready set.
-wait for the device to do its stuff
-it will strangely reconnect after a while and internet works again
notes:
kaspersky 7 : -turn of the kaspersky protocol on the networkadapter of wm6
-allow acces to svhost when it asks for it.
norton 360: -no problem found .. maybe you need add LSP to trusted
networks
internet+wmdc 6.1
double post ...
moderator remove this please
hey dajojo yer guide is great , i tried it and unfortunately, it connected for about 30 seconds and went straight back to usb device not recognised.
when it was connecting it should show up as "generic rndis internet sharing windows mobile device" or something similar.
any further assistance would be great.
m running vista home premium 32 bit (went back to it from ultimate)
Finally Solved!
Hi there!
Seems to be the same problem on HTC Dual!
try this
go to start>settings>system>power>advanced
if the checkbox "When device is turned on, do not charge battery when connected to PC" is checked uncheck it and tap ok! Then go back again and check the checkbox again and tap ok again. and the ActiveSync software will sync all data!
Hi.
I am a bit embarrassed about writing this, I never thought I would make a brick of my Prophet during “upgrades”...
But here I am, with a phone that don't want to sync with any computer after I accidentally pressed cancel on an active sync dialog box asking for setup with a new device, during upgrade to the latest Touch VIII. Have upgraded several times with several different ROM’s before, but this time things went wrong.
If I choose to start my device normally, it goes trough the HTC screen and stops after the Qtek (HTC in Norway) screen listing the different versions of the hardware…
When I restart to boot loader (Cam button + reset) the 3 colours turn up ok, but when I put an USB cable in the device and the lower, left part of the screen shows USB, active sync will not recognise any new device no matter what I do.
I can still find the Prophet when I go to properties on the computer, but somehow active sync does not care about that.
Are there any way to use a program at the host computer to sync properly with the Prophet?
I would really appreciate any help that could rectify this problem.
Regards, Lars Norway
I believe the " WM6 Upgrade Guide" thread has the info you needed.
panda88 said:
I believe the " WM6 Upgrade Guide" thread has the info you needed.
Click to expand...
Click to collapse
Tried the info there without success...
The guide assumes that you have connection with ActiveSync, but I can not seem to get connection.
So, I really need some advice about how to make a connection to the computer I will make the programming from, when ActiveSync is not working properly.
Have tried to restart both the device and the host computer, have reinstalled ActiveSync, have tried to start the different roms without having a connection to A.S., but no luck...
Have realized my mistake and bought a new Prophet, but would still like to get the old one working again.
it has nothing to do with activesync.
Not sure u really understand the below statement from the thread I mentioned.
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
in case you can't NVID roms, you can still use those step1 roms mentioned by ROM gurus here.
panda88 said:
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
Click to expand...
Click to collapse
Well, the problem is that I am not able to connect...
As far as I understand, the only way to connect is by using ActiveSync?
Regards
connect = the cable between prophet and your pc. after that just run the rom update utility. just dun bother the activesync (does it sound logical to u to establish activesync in bootloader mode?)
OK, I have tried it, but will try on some different computers also.
Posting in a couple of hours.
Thanks for your help so far!
then wish u good luck. happy un-bricking.
OK, same as before.
Depending on which ROM I try, the following messages are the result:
Error [300]: Invalid update tool.
Error [274]: Connection (The update utillity cannot connect to your PDA phone.)
If I try the Touch VIII direct, it stops in Initializing for a while, and then a message appears with the text: Cannot connect to device, Would I like to try again?
Besides, in the welcome screen during the "ROMUpdateUtility_NV_G4.exe" in the Prophet_PV_Temp program, step nr. 2. asks me to ""Establish an ActiceSync connection with your PDA phone."
So, no change from yesterday yet...
are you using windows vistA???
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
hifiasylum said:
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
Click to expand...
Click to collapse
No, on the contrary. The best change you have is XP. Zeroed asked about Vista because it could be the reason of your troubles.
What I should do is just one detail different of what you have already tried:
Put the prophet in bootloader.
DISable "allow USB conection" in the conection-setting panel of ActiveSync
Connect your prophet with the USB cable
Run the NVID RUU again
If that is succesfull, you can upgrade to the WM6 ROM you like.
OK, will do.
Tried Vista just now, same errors and no luck.
Be posting in a minute...
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
hifiasylum said:
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
Click to expand...
Click to collapse
Sorry, I'm out of options...
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Just wondering if your computer detects prophet as a device at all? Does the normal plug device sound comes on when you plug in? Just a long shot, stick in a SD card and try with windows media player to see if it can sync or put files onto SD card. if so, get rom refreshed via SD card...
try few hard resets before you try this.
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
hifiasylum said:
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
Click to expand...
Click to collapse
This sounds dumb, but try restarting your PC, closing all apps running in background (including firewalls), restarting Prophet (with stylus in reset hole). DO NOT TRY TO USE ACTIVE SYNC. Boot into bootloader (Three colours screen), connect USB cable and flash QTEK lastest official, or Jesterz AKU 3.3 (I have found this ROM to have magical powers of unbricking.)
Good luck!
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Hmm this is wierd.I ran into problem earlier this month trying to flash a ROM but got stuck somewhere. So I followed the steps given in the sticky thread. Everything work smoothly. I am using XP SP2 and mine is a G3.
Let's make the assumption that your PDA is not faulty. Maybe you can try the steps again but this time :-
1. Change to another USB cable (or you may test the existing cable by connecting to a working pda)
2. Change to another USB port
3. Make sure you are not running any program that hogs the USB resource
4. If you are using USB hub, please don't connect using it. Make a direct connection to your computer.
that's all I can offer now...hope it helps.
Hey guys,
When I bought my Omnia 2 with WM 6.1 on it, it worked great but when I went and installed the stupid PC studio software that came with the phone I tryed to update and now my phone has either a thing saying
"DOWNLOAD MODE!
Do not turn off.
It takes about 10 minuites."
or it will have a symbol of a phone connecting to a "!" next to a computer symbol.
I can no longer use this phone if anyone can help me it would be very much appreciated.
Thanks.
hahaha to funny bricked means it no longer turns on meaning you don't even get the download mode. its just like a useless brick. But anyways to the problem at hand, there is only one way to brick the omnia and that is if you flash the eboot which you have not done since it still works and turns on.
Unplug from USB cable and turn it of and/or take out the battery. Put the battery back in and plug it into your PC and try to update it with PC studio and see if it works it should not have an issue. Repeat the steps if it fails but this time start PC studio first and then plug in the omnia and see if that works.
If all else fails you need to get OCTANS and download the official firmware for your region or a custom firmware if you want. I'm assuming you have a I8000 which OCTANS is used to flash don't know if that is the case with other omnia 2 as well. Visit this site and look for OCTANS and all the firmware you need. Since you are flashing anyways i would recommend you flash JD3 ROMS so you have the latest. Either go official ROM or go Lite i myself am using tw2 lite ROM.
I went to that site and nothing on there says anything about "OCTANS" so could you possibly give me a link of some sort to what I need.
I've tried running PC Studio on XP and Vista with no luck on getting the computer to even see the phone anymore so I've just about given up on the whole thing.
heavywater said:
I went to that site and nothing on there says anything about "OCTANS" so could you possibly give me a link of some sort to what I need.
I've tried running PC Studio on XP and Vista with no luck on getting the computer to even see the phone anymore so I've just about given up on the whole thing.
Click to expand...
Click to collapse
Here is the Octans Downloader's latest version. Just run it (If you are using Windows Vista or 7, set compatibility mode to Windows XP SP2), select the appropriate parts in various slots, click Detect Device and then turn off and plug your phone into usb cable. It will detect the phone, then just press Start and wait for the process to complete.
In addition to these steps, you might also need to update activesync drivers and install Samsung CDMA Modem drivers if you are using Windows 7 or Vista. For more details, see this thread :
http://www.modaco.com/content/b7610-omnia-pro-b7610-modaco-com/299070/tut-flashing-rom-using-octans/
I hope you get back your phone soon!
Good luck and Cheers!
same problem - cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between.
unable to hard reset, unabe to flash - octan does not detect the phone...
any chance to save my phone?
1. get the ROMs from modaco site.
2. Start Octans and follow the ROM update guide in modao.
3. Click detect in Octans.
4. Power off phone (remove battery and insert back in ur case).
5. connect phone to PC/laptop (do not use any usb hub).
6. u shd see the download button becomes ungrey. click it to flash.
the download button remains grey......
what OS are u using?
If it's vista or win 7 and whether it is 32bit or 64bit.
The solutions are at modaco.
i read modaco.
the device is stuck: when i turn it on, the screen shows only one image:
an image of a mobiel device, a pc, and in between a (!) sign.
cannot hard reset device, cannot do anything.
am using vista, and followed all protocol from modaco (first time was able to flash - thats how the device got bricked).
octans (or the pc) does not detect the device when i connect it to the - that is the problem...
OK I now have installed the CDMA drivers and i'm running OCTANS in XP SP2 mode what OS should I download to use with the phone and how big will it be?
Thanks so much for the help guys.
And btw is there any versions that will keep the samsung virtual keypad and things like that (not the damn cube though)?
like i menchioned get a lite ROM I use tw2 ROM's Garys are good to. I like tw2 ROM because they are totally stipped ROMS except for samsung dialer and SMS and he gives cabs of all the apps so people can restore what they use. Garys is also very nice lite ROM with the basic apps that mainly everyone uses. Its your choice really what you want you can install the JD3 stock ROM as well, but why? when these lite ROM's giuve you more RAM.
As for drivers you may need to search on the site i don't have the links because there are new updated drivers for windows 7 which should work on vista too. When using octans make sure to hit detect and then plug in the phone (phone must be off) then click start. You only need to flash the PDA unless other parts messed up during the update, you won't know till you flash.
Driver installation:
1.) Turn off Phone
2.) Plug into PC
3.) Let it install the default drivers
4.) Go into device manager
5.) Go under the phone menu
6.) Update drivers and follow the steps and when asked which location point to the driver you just downloaded.
flash i8000
PROBLEM-HEPL pls..
cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between!
unable to hard reset, unabe to flash - octan does detect the phone, but flash phone image and error (the end)
octan write: [Setup:0] PDA Device removed.
[Setup] Windows XP
[Setup] Download Ram Size :41777920 bytes,(39 MB)
OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&ed04620&0&4#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
[Down] CSC Image.
[Down] MoviNAND Image.
[Down] Phone Image.
[CSC:0] Download start 0x0
[CSC:0] ----------------- Information of Multi CSC Image ------------------
[CSC:0] Verision:[I8000ATOIJ8]
[CSC:0] SalesCode:[ATO]
[CSC:0] Priority:[0x1]
[PDA:0] LANG_ID:[7][0405]
[Phone:0] Download to 0x0
[Phone:0] StartOffset: 0
[Phone:0] EndOffset: 16777216
[MOVINAND:0] Download start 0x0 and all!! :-(
I have win 7 32bit..driver install from modaco..octans (setting XP service pack3), restart..but cannot flash..HELP please? Soory, my bad english...
Hi,
My LEO can't connect to PC, even in trasnmitting data mode. The only way to do this is start phone in bootloader mode, and then upload ROMs via cabel. I've tried to upload few ROMs including orginal ROM. What is more when sb's call me automatically is turning on handsfree mode. Active Sync in working via bluetooth. Please help me.
madanldz said:
Hi,
My LEO can't connect to PC, even in trasnmitting data mode. The only way to do this is start phone in bootloader mode, and then upload ROMs via cabel. I've tried to upload few ROMs including orginal ROM. What is more when sb's call me automatically is turning on handsfree mode. Active Sync in working via bluetooth. Please help me.
Click to expand...
Click to collapse
What OS is your PC?
You need Windows Mobile Driver if you use win vista or win 7, if XP, use Active sync. Download it from Microsoft website.
If you already has that driver, try to run in Admin mode (Vista and 7) or else try different USB port, or even change the cable.
Good luck
connetion has worked properly before. I've installed all needed stuff, and I've checked on other cable, other OS and PC. Transmittig data mode ist'n worked too. Connection is working only in BL mode.
Always going to handsfree when call comes in can somwtimes be associated with faulty USB. There's a thread somewhere called "stuck in car kit mode".have a read, see if the symptoms match. In the meantime, try giving the USB port a clean with a (very dry!) Toothbrush.
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.