Related
Not to be redundant with other threads, but to compile in one place, maybe we can list in this thread the known issues in the new Cingular ROM, with links to the other threads where solutions/ideas are being discussed. Some of those which come to mind are the following:
Goodlink Integration with Dialer not Working
PIE Proxy Issues (and related VPN troubles)
SD Card Not Reading Correctly
Disappearance of SmartDialer ... which should be fixable with the cab file located here.
Additionally, know helpful registry tweaks are being (and should be) compiled here
And finally, some helpful fixes/mods:
PTT Fix - to take back control over the PTT button (especially useful if you don't plan to use PTT)
BandSwitch - to manage your connections (and thereby increase battery life)
Well, this is just a start.
What are the SD problems? I haven't run into anything yet...
Check the link I provided on the first post.. many folks (myself included) have intermittent problems where the directories on the card are no longer visible (until after a soft reset and/or removal and re-insertion of the card).
Bummer. I hope that doesn't hapen to me. But if this XDA-Lives ROM is released, hopefully I won't be using Cingular's (AT&T's) 2.06 ROM much longer!
Some, including myself, have lost SmartDialer.
I'm trying to find a solution.
berdinkerdickle said:
Some, including myself, have lost SmartDialer.
I'm trying to find a solution.
Click to expand...
Click to collapse
Yeah, I have this problem too. Luckily I've been using the E-Ten Dialer, so I'm not used to the Smart Dialer. But it'd be nice if I had it available, since I'm not using E-Ten anymore.
A lot of people use PTTfix. Might want to put a shortcut to sleuth's thread, as his latest release apparently fixes the issues with it. (I'll post it if I happen to stumble across it in my journies of trying to catch up with the latest posts.)
EDIT: Here's the thread: http://forum.xda-developers.com/showthread.php?t=279585
sk0t said:
A lot of people use PTTfix. Might want to put a shortcut to sleuth's thread, as his latest release apparently fixes the issues with it. (I'll post it if I happen to stumble across it in my journies of trying to catch up with the latest posts.)
EDIT: Here's the thread: http://forum.xda-developers.com/showthread.php?t=279585
Click to expand...
Click to collapse
Yes, but is that really an issue or a feature? I am sure Cingular would consider it a feature, but everyone knows it's total crap.
Smart Dialer coment:
Some are having issues with new ROM and no smart dialer. I had no problems, but I also know that installing ETen Big Button Dialer (available at 8525software.com) disables Smart Dialer. So I tested it. Install ETen and as supposed too, no smart dial. Then I unistall ETen and the smart dial is back working ok. Also in the phone screen the right soft key has an option for the Smart Dialer, make sure it is turned on.
Now if anyone can get ETEN to work WITH smartdial, that would be cool.
I could not get E-Ten to work with SmartDial, though purportedly you can... see link here for discussion on this issue.
If you do get it working, an easy step-by-step would be appreciated!
richy240 said:
Yes, but is that really an issue or a feature? I am sure Cingular would consider it a feature, but everyone knows it's total crap.
Click to expand...
Click to collapse
Heh.. I definitely consider it an issue.. Cingular does say feature no doubt, but I should still have the ability to remap that button. Hence the reason I suggested it.
I added it to the first page (which I am updating as folks add thoughts)
http://forum.xda-developers.com/attachment.php?attachmentid=33088&d=1168703772 Try this Smart Dial Cab
That fixed it for me.
Thanks Wpbear and MVT.
Updated the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Eten Dialer WITH SmartDial Works for me but the ATT name is scrunched up a little.But everything works.
SEE My next post. Soory
Were you intending to attach files to your last post? Not sure I can follow it.
This has Portrait and Landscape Mode w/Smart Dial, Look pretty good.
Excellent -- seems to work .. now I will see if those black glass skins work with it -- thanks
weinson said:
I unzipped it ... just install the cab file, restart, and it should work ... or am I missing something? At the moment I don't have any version of the e-ten dialer installed (do I need to do that first?)
Click to expand...
Click to collapse
No the zip with the cab has the smartdialer and the ETEN buttons.
Hi there,
I was looking around for an app to let you choose different ringtones for contacts on a priority basis.
I found something similar by v3patel, but it didn't allow me to prioritise, e.g. a 'personal' ringtone to take precedence over a 'business' ringrone when a contact is in both categories.
....so I made this app. I hope that it might be useful for others too, do as ever let me know of any bug reports or feature requests.
EDIT: If you were testing v0.1, please upgrade to v0.2 for an important bugfix!
Download Link Here - v0.2
This app requires the .net compact framework on your device. For WM6 this comes pre-installed in ROM, others need to download here
Carlos
=====
Instructions
============
1. Choose a category and a ringtone.
2. Click 'Add to list' to add it to the priority list.
3. Repeat steps 1 and 2 until you've chosen all your desired categories and ringtones.
4. Use the Up and Down arrow buttons to order your list into priority; categories at the top take precedence over categories below them.
5. Click 'Set Now' to make the changes.
Troubleshooting
===============
The app assumes that the ringtones are stored in \Windows\Rings. If this is NOT the case, go to the menu and choose 'Set Folder' to point it to a different location. This setting is currently NOT stored (sorry!) but will be in a future release if I get time!
Further help / support
======================
Please go to www.fatattitude.com/software or post in this thread
cool, will try
Good work....
Hey, great work and a good idea...
will try it also (it's too late to tell someone to call me )
Maybe it could be possible to listen to the ringtones before adding in a future release ? Just as input for you....
what does it mean "choice currently not stored" ? Will the changes be made to the categories, but when you restart your app, you can't see it anymore ? I think it is this way, but i'm not really sure....
Anyway, i like it !
Cheers, Peter
petervbeck said:
what does it mean "choice currently not stored" ?
Click to expand...
Click to collapse
No, it just means that your preferences aren't stored, including where you tell the app to look for the ringtones. Your contacts will be set to the new ringtones you ask for and will stay this way, even after a reset.
nice work. will try today. thx
i am using trinity wm6 bape rom. and got a platformnotsupport exception.
h0228631 said:
i am using trinity wm6 bape rom. and got a platformnotsupport exception.
Click to expand...
Click to collapse
Sorry, I forget to mention that the app requires the .net compact framework 2.0 to be installed, perhaps this is giving you the error. Download link added to first post.
C
Hi, for anyone experiencing problems with ringtones not playing in v0.1, please upgrade to v0.2 for an important bugfix... ...first post updated!
Do please keep feedback & suggestions coming - nearly 200 downloads and no comments on the program!
C
carlosp_uk said:
Sorry, I forget to mention that the app requires the .net compact framework 2.0 to be installed, perhaps this is giving you the error. Download link added to first post.
C
Click to expand...
Click to collapse
wm6 should have 2.0 by default. at least on official rom. I believe the bape rom should also have it. Anyway, I will try 2.0 out tonite and report later.
has anyone tried this on a WM Treo?
bnycastro said:
has anyone tried this on a WM Treo?
Click to expand...
Click to collapse
No, please try it out and let us know if possible!
If you just want to test the app, you could always add a contact to a new category, for example, "Test". Then just run the app and assign all contacts in category "Test" to a ringtone. If the contact you changed is successfully updated then the program works for you! If not, no harm done.
Do let us know if you have success.
h0228631 said:
wm6 should have 2.0 by default. at least on official rom. I believe the bape rom should also have it. Anyway, I will try 2.0 out tonite and report later.
Click to expand...
Click to collapse
still not work on my wm6 trinity.
h0228631 said:
still not work on my wm6 trinity.
Click to expand...
Click to collapse
It is perhaps to do with the recorded version number of your ROM and the settings for my CAB file.
Can you post the exact error message that you are receiving, along with when you are receiving it? Then I can try and help you.
C
It didn't work on my Prophet running WM6.
The program itself works, and assigns the correct ringtone to each category, but when a person calls, the default ringtone that is set in sounds & notification is played instead of the category ringtone assigned.
In each contact's information, the correct ringtone for that category is assigned. But it doesn't play that tone when that person calls.
When I open someone's contact detail and tap the ringtone, the left softkey changes to "play". When I tap that, there's no sound.
However, if I assign that same ringtone manually in the contact details, it plays when I tap "Play"
Hope you understand what I mean...
Putra said:
The program itself works, and assigns the correct ringtone to each category, but when a person calls, the default ringtone that is set in sounds & notification is played instead of the category ringtone assigned.
Click to expand...
Click to collapse
Thank you - if only all bug reports were that detailed!
Can you confirm that you're running v0.2 of the program? There was a bug in v0.1 that caused this behaviour. (see first post for download link)
C
Hi carlosp,
Yes, v0.2 works perfectly. Thanx for this app! It really saves us the chore of having to assign a ringtone for each contact individually.
Now, I'm trying to decide if I still need innesoft address book...
Putra said:
Yes, v0.2 works perfectly. Thanx for this app! It really saves us the chore of having to assign a ringtone for each contact individually.
Click to expand...
Click to collapse
No problem - let me know if you have any bug reports or more feature requests. I was thinking perhaps add an 'Any Category' option in the drop down, so that it's possible to unassign ringtones from all contacts in order to clear everything off and start again.
Hi,
something strange happened: I flashed my prophet to Prophet Touch VII ROM (I was on v6 before), and the Tone Manager didn't work.
Ran the program as usual, but after that I got the same problem as described in my post above. The ringtones are assigned to each contact but doesn't play during the incoming call. Exactly the same prob as in v01.
Strange....??? it was working before on my previous ROM....
A request: the folder is not saved but always reverts back to \windows\rings at each opening of the program. I have mine in the SD card... can you make the prog save the SET FOLDER?
Thanx...
EDIT: I re-downloaded the program from your website and re-installed it, and it works! Very strange, maybe the file in my PC got corrupted or something...
Tone Manager not working on Cingular 3125 (WM 5)
Hi Carlos,
I have installed .net framework v2.0 on my Cingular 3125 and after I start Tone Manager, I get the following error:
Error
An unexpected error has occurred in Tone Manager.exe. Select Quit then restart this program, or select Details for more information.
After clicking on details, I get:
Error
Tone Manager.exe
NotSupportedException
at
MicrosoftAGL.Common.MISC.H
andleAr()
at
System.Windows.FOrms.Control.
_InitInstance()
at
System.Windows.Forms.Control.
.ctor()
at
System.Windows.Forms.Button..
ctor()
at
Tone_Manager.Form1.InitializeC
omponent()
at Tone_Manger.Form1..ctor()
at
System.Reflection.RuntimeConst
ructorInfo.InternalInvoke()
at
System.Reflection.RuntimeConst
ructorInfo.Invoke()
at
System.Reflection.ConstructorIn
fo.Invoke()
at
System.Activator.CreateInstance
()
at
MyForms.Creat_Instance_()
at MyForms.get_Form1()
at Tone_Manager.Form1.Main()
I've tried V3Patels VipPimRingTone, and I get somewhat similar error.
Any ideas?
Thanks,
Joe
i think this is like RINGO but ringo is better coz u can classify also which sms tone u like for individual or group.
This is for spl 1.2 i did not make any changes other than the language and uc compliant i am going on vacation tomorrow and will be back on monday. I am only posting this so if someone else wants to try then they can. there is a little problem with making a new connection but if use my cingular.xml file on start up then it will work fine as it does for me. there is also something wrong with the phone calls but im not looking into it until i get back. so good luck guys
SPL 1.2
http://www.megaupload.com/?d=BKGOGFXR
SPL 3.5
http://www.megaupload.com/?d=L7T4TXKT
Sorry for throwing so many roms at you guys but i was board at work to day and thought i would give this another try. hope you guys are using my connection/contacts package as this should help with testing all these different roms http://forum.xda-developers.com/showthread.php?t=403458
irus said:
This is for spl 1.2 i did not make any changes other than the language and uc compliant i am going on vacation tomorrow and will be back on monday. I am only posting this so if someone else wants to try then they can. there is a little problem with making a new connection but if use my cingular.xml file on start up then it will work fine as it does for me. there is also something wrong with the phone calls but im not looking into it until i get back. so good luck guys
http://www.megaupload.com/?d=BKGOGFXR
Click to expand...
Click to collapse
ooooooh yes!!
I'll continue ur project for you
I hope that i can solve this problems
michyprima said:
ooooooh yes!!
I'll continue ur project for you
I hope that i can solve this problems
Click to expand...
Click to collapse
Well done IRUS!
Michy, please add an SPL 3.5 release, 60-70% of the forum active users have SPL 3.5
sergiopi said:
Well done IRUS!
Michy, please add an SPL 3.5 release, 60-70% of the forum active users have SPL 3.5
Click to expand...
Click to collapse
Post 1...........
irus said:
Post 1...........
Click to expand...
Click to collapse
irus u are really a genius
tomorrow i'll download the spl1.2, i have only 100mb traffic at days...
So i can work only on 1.2 version. However when irus is there can make spl3.5
Irus i hope i can really help u
michyprima said:
irus u are really a genius
tomorrow i'll download the spl1.2, i have only 100mb traffic at days So i can work only on 1.2 version. However when irus is there can make spl3.5
Irus i hope i can really help u
Click to expand...
Click to collapse
i hope so to. I would much rather make this rom as a community then by myself
Irus and Michy,
Both of you are my heroes. Thank you. I'm aware however of some errors and speed problem of the original chinese version, and am waiting for the "stabilisation version " atm. I'm currently using mutou version 1 which is fast and no serious bug. Good that you have gained the expertise to do the translation, as we can then do it for all future non-english ROM.
Irus, don't worry about so many ROMS. You've given us more choices, that's all. We thank you for these. Keep up the good work!
Irus and Michy,
Can you put back the standard keyboard and remove the chinese SIPs? If we can fix the setting to turn off auto-rotate and have touchflo setting it will be sweet. Also, for some reasons, my Sprite backup does not work. All these were among the problems in the chinese version.
Okay, I tried out the spl1.2 Translated (into English) version of Mutou's ROM.
First, I checkd through the settings and noted the following:
1. In the power setting, there are three tabs with names called "10 sec", "30 sec" and "1min". I think the correct name for them should be "External Battery", "Internal Battery", and "Backlight brightness" or similar wording.
2. TouchFLO setting is all messed up.
3. Soft key setting are still in Chinese. I think we should either remove this, or have it in English.
4. Auto-rotate setting still does not respond.
5. A4 keyboard should be completely removed and replaced by the standard keyboard
6. We should hide extended-ROM2
7. I can't find camera application, However, I am able to start the camera if I use the picture viewer program. The problem, however, is that all the usual camera settings such as choosing the mode, resolution, etc, are not responding to user actions.
8. When I tried to set up my data service provider's setting, I noticed that it only has ability to set up dialed up modem, so I'm unable to test any 3G data connection.
9. SMS services setting gives a blank screen.
10. Although the start menu has a link to phone, phone application does not exist. I can't start a dialer. However, I am able to go to the contact application and make a call, although I'm then unable to end the call since there is no dialer.
11. The Notes application does not start.
12. Camera application started via the picture viewer does not offer the opportunity to use microdrive as storage, although microdrive is functioning properly.
13. Window Media Player does not produce any sound.
14. After using the device for a while, the device stop producing sound although Sound Setting has checked the bottom two entries.
At this point, I installed my wktask and FtouchSL.
Then, all applications stop working, wherease the file explorer was working before this. Contact applicaion no longer could start. Calender could not start, and shows an error saying "No program memory availalble. Tap Start>Settings>system tab>memory , stop programs that did not automatically stop, and try again". Actually no program is running yet. I then uninstalled both wktask and Ftouchsl. The ROM does not seem to allow it to be successfully removed.
At this point, I could not proceed any further.
Good try though, at least most of the text are in English now. Looking forward to the second attempt.
eaglesteve said:
Okay, I tried out the spl1.2 Translated (into English) version of Mutou's ROM.
First, I checkd through the settings and noted the following:
1. In the power setting, there are three tabs with names called "10 sec", "30 sec" and "1min". I think the correct name for them should be "External Battery", "Internal Battery", and "Backlight brightness" or similar wording.
2. TouchFLO setting is all messed up.
3. Soft key setting are still in Chinese. I think we should either remove this, or have it in English.
4. Auto-rotate setting still does not respond.
5. A4 keyboard should be completely removed and replaced by the standard keyboard
6. We should hide extended-ROM2
7. I can't find camera application, However, I am able to start the camera if I use the picture viewer program. The problem, however, is that all the usual camera settings such as choosing the mode, resolution, etc, are not responding to user actions.
8. When I tried to set up my data service provider's setting, I noticed that it only has ability to set up dialed up modem, so I'm unable to test any 3G data connection.
9. SMS services setting gives a blank screen.
10. Although the start menu has a link to phone, phone application does not exist. I can't start a dialer. However, I am able to go to the contact application and make a call, although I'm then unable to end the call since there is no dialer.
11. The Notes application does not start.
12. Camera application started via the picture viewer does not offer the opportunity to use microdrive as storage, although microdrive is functioning properly.
13. Window Media Player does not produce any sound.
14. After using the device for a while, the device stop producing sound although Sound Setting has checked the bottom two entries.
At this point, I installed my wktask and FtouchSL.
Then, all applications stop working, wherease the file explorer was working before this. Contact applicaion no longer could start. Calender could not start, and shows an error saying "No program memory availalble. Tap Start>Settings>system tab>memory , stop programs that did not automatically stop, and try again". Actually no program is running yet. I then uninstalled both wktask and Ftouchsl. The ROM does not seem to allow it to be successfully removed.
At this point, I could not proceed any further.
Good try though, at least most of the text are in English now. Looking forward to the second attempt.
Click to expand...
Click to collapse
most of this problem are there because irus have used incompatible muis. So i'm trying to solve all this problems, but it isnt simple
michyprima said:
most of this problem are there because irus have used incompatible muis. So i'm trying to solve all this problems, but it isnt simple
Click to expand...
Click to collapse
Hullo Michy,
If you managed to solve these issues, would you avail it for both spl's..1.2 & 3.5
Cheers
for now, i have fixed smsservice and backlight issue + standard virtual keyboard input.
You can solve this on your ppc with overwriting file in attached zip in /windows folder and import the keyboard.reg registry file.
Then reboot...
I cant fix more for now...
have a problem
i can not run the Phone in the Programs menu.
michyprima said:
for now, i have fixed smsservice and backlight issue + standard virtual keyboard input.
You can solve this on your ppc with overwriting file in attached zip in /windows folder and import the keyboard.reg registry file.
Then reboot...
I cant fix more for now...
Click to expand...
Click to collapse
nice job on the fix.... i am sending you a pm
at the moment this project is dead. if you want a good rom go here, its a good one by sogarth http://forum.xda-developers.com/showthread.php?t=406348
irus said:
at the moment this project is dead. if you want a good rom go here, its a good one by sogarth http://forum.xda-developers.com/showthread.php?t=406348
Click to expand...
Click to collapse
There is'nt a need to pursue this further, because the purpose of the translation is to get something like what is shown in your link. Thank for the effort.
Sergiopi, I recommend that the translated ROM link in your ROM list thread be removed because they are still very half baked.
im very much a noob when it comes to ppc as you can see this is my 1st post/ thread.. id like to say thanks for the many apps I got on here.
now my problem is that my old htc home cab crashed my phone after I installed wm6.1. so what I need is for someone to point me the right direction to a working htc home pluggin for wm6.1 and also is there away to make my phone louder? like and app. or a hack.
*if this is in the wrong section mods u can move it...my bad
for the htc home cab, you would probably need to check out one of dcd's rom threads for a fix like on the 3-5th pages or somewhere in there.
to make your phone louder, you can use audiopara. i personally use gc's audiopara since it works perfectly. just search for GC Audiopara on here and install it then reset. it works great.
Hope this helped and WELCOME TO XDA DEVELOPERS
Get HTC Home Customizer from http://www.pocketemu.com/hhc-info.html
It will auto download the correct home for your phone, with working weather, etc. Very useful tool.
BTC
im very much a noob when it comes to ppc as you can see this is my 1st post/ thread.. id like to say thanks for the many apps I got on here.
now my problem is that my old htc home cab crashed my phone after I installed wm6.1. so what I need is for someone to point me the right direction to a working htc home pluggin for wm6.1 and also is there away to make my phone louder? like and app. or a hack.
*if this is in the wrong section mods u can move it...my bad
Reply With Quote
Click to expand...
Click to collapse
Here is the HTC Home cab that been working for me perfectly on my titan... i've attached it to the message...
the GC Auriopara will work perfectly too... with the permission of GC i'm going to post it too... it's also attached...
thanks a lot guys your awesome. the htc home worrks fine on my phone, but the audio cab. doesn't show up any where and I tried to reinstall it and it said it was unsuccessful. do I have to dl it to my pc and sync it to my phone?
If you do not mind testing/flashing and would like to try this ROM please do so.
Build 20771, TP2 TF3D and some other Rhodium apps. Can you please test Data, activesync, bluetooth, GPS and other basic functions. Please report back even if nothing is found.
Thanks!
Updated
20 March 2009
07:00:00 GMT
Just added the usual missing stuff and cleaned it up.
Anyone test GPS yet?
http://www.4shared.com/file/93909516/d3e9cb1e/RC_At0mAng_V51_03-20-2009_HTC_TP2_TF3D.html
For new people who may need some additional programs loaded up before using the ROM.
Cab file to install UC config setup on Storage Card. To be run before you flash. If you are a UC user just back up your cab storage folder and sdconfig.txt file. Or dont use it at all
Select Storage Card as install directory
http://www.4shared.com/file/93912051/c54bf7e3/At0mAng_Pre_Install.html
Files included:
Advanced Config
GSensor Config Tool - Will give the writer credit once I find post again
Clear Temp
SoftReset
SPB ScreenCapture
Total Commander
At0mAng said:
If you do not mind testing/flashing and would like to try this ROM please do so.
Build 20771, TP2 TF3D and some other Rhodium apps. Can you please test Data, activesync, bluetooth, GPS and other basic functions. Please report back even if nothing is found.
No need to report about the TP2 Manila bugs.
Thanks!
http://www.4shared.com/file/93878824/dfd20272/Test_3-19_RUU_signed.html
Click to expand...
Click to collapse
Is this a New build or the same one posted from last night?
davezaff said:
Is this a New build or the same one posted from last night?
Click to expand...
Click to collapse
A newer build...just want to make sure it is ready for general relase.
Installed, so far data and activesync look the goods. Ill test GPS etc over my lunch break.
Some different program icons...what do you think?
Same for me... Data, activesync, and basic functionality looking good so far. A couple of big pluses for me - memory use is only about 33%. It was above 50% on NRG's rom with TF3D 2 (that's not meant as any kind of negative towards NRG, I love his newest rom too, just a comment). And Weather Watcher works correctly. On all other cooked roms I've tried Weather Watcher appears "zoomed out".
At0mAng said:
Some different program icons...what do you think?
Click to expand...
Click to collapse
Do you have new taskbar icons too? (hopefully I'm not being too greedy here).
I just flashed with this rom and checked the date. It said rom date is 03/14/09 was wondering maybe you just forgot to change the date?
thanks
A small problem (with a solution). You can't add file explorer as a favorite anywhere in the first two rows of favorites. Or more acurately, you can add it, but it won't launch. The solution is explained in post #500 here:
http://forum.xda-developers.com/showthread.php?p=3463613&highlight=file+explorer#post3463613
Joecd04475 said:
A small problem (with a solution). You can't add file explorer as a favorite anywhere in the first two rows of favorites. Or more acurately, you can add it, but it won't launch. The solution is explained in post #500 here:
http://forum.xda-developers.com/showthread.php?p=3463613&highlight=file+explorer#post3463613
Click to expand...
Click to collapse
Try my icon pack I posted a few rows up and it should work without the fix.
Thanks for the solution but it may not be needed with the icon pack.
Please report back.
Thanks!
Yes the date was not changed.
If you are talking about my status icons I may have them done before this build is officially released. If not I will have an add on pack when this is officially released.
Thanks for all the help.
Just flashed your new test ROM. One stupid question - how does the GSensor work? Also the default keyboard does not seem to be of Fuze - guess I need to install the fuze keyboard cab from your other thread.
pkshr said:
Just flashed your new test ROM. One stupid question - how does the GSensor works? Also the default keyboard does not seem to be of Fuze - guess I need to install the fuze keyboard cab from your other thread.
Click to expand...
Click to collapse
Go to tools...and in there is a nifty little app to change it.
Not sure what you mean how it works. I believe it is there for apps that use so they can auto rotate.
At0mAng said:
Go to tools...and in there is a nifty little app to change it.
Not sure what you mean how it works. I believe it is there for apps that use so they can auto rotate.
Click to expand...
Click to collapse
Regarding the GSensor thing, I was expecting "it is there for apps that use so they can auto rotate" but it is not working for all of the apps. it works for the calculator program but so far calculator is the only program that rotates as it should. I wish my Garmin XT would rotate .. is there any whitelist thing where I need to enter the information of Garmin XT ?
I will keep on testing this ROM and update.
pkshr said:
Regarding the GSensor thing, I was expecting "it is there for apps that use so they can auto rotate" but it is not working for all of the apps. it works for the calculator program but so far calculator is the only program that rotates as it should. I wish my Garmin XT would rotate .. is there any whitelist thing where I need to enter the information of Garmin XT ?
I will keep on testing this ROM and update.
Click to expand...
Click to collapse
Yes there is...I will find it and let you know or include it in the ROM
Edit
Sorry dont have the info for Garmin...search around may find it
voicecommand
Atom.
I'd love to install this ROM and give it a go, however I really need/use Ms Voice Command and WorldCard Mobile from the stock ATT Fuze rom. I know youve taken VC out of your previous roms, if these are not included in this rom either, would it be possible for you to cab these up as post installs?
At0mAng said:
Yes there is...I will find it and let you know or include it in the ROM
Edit
Sorry dont have the info for Garmin...search around may find it
Click to expand...
Click to collapse
You can use the G-Config program to add programs to the whitelist, available here. Makes adding applications a breeze, hit add new app, open the app and put the stylus in and reset. Works real nice with tf3d too
nableezy said:
You can use the G-Config program to add programs to the whitelist, available here. Makes adding applications a breeze, hit add new app, open the app and put the stylus in and reset. Works real nice with tf3d too
Click to expand...
Click to collapse
Nice...will have to add it to my SDConfig package
abhi2879 said:
Atom.
I'd love to install this ROM and give it a go, however I really need/use Ms Voice Command and WorldCard Mobile from the stock ATT Fuze rom. I know youve taken VC out of your previous roms, if these are not included in this rom either, would it be possible for you to cab these up as post installs?
Click to expand...
Click to collapse
If you send me a PM to remind me when I release this ROM I can cook one for you with both in there.
Edit...I am cooking one now if you want to test it...will post a link when done
Here is your link...
http://www.4shared.com/file/93897817/8aa5ae3c/Test_3-19_2RUU_signed.html
Has what you asked for.
Thanks a ton man
Downloading it now..
First impressions, very fast, quickly syncing with my Exchange, no flaws found im my first couple of minutes playing with it.
Was hoping to see the new start menu (the unpopular one, is seems, but the new one) and it wasn't there...is there a fix or cab to have that?
Thanks for allowing the preview to this tight rom!!!!! will get more details and will edit this post if bugs are found
Jholton