{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RadarWeather v1.0
for TouchFLO 3D
only for WVGA
PLEASE REPORT ANY BUG-----------------------------------------
Tested and works on: WM6.5 (Miri, Dutty), WM6.1 (Miri), TouchFLO 3D 2.0x, 2.1x, Leo R4 with Manila 2.5
Tested and not works:
- maybe TouchFLO 3D 1.3x
- maybe with not WWE ROM 03_mtp2.cab install failed, but not big problem, after all cab install go to FAQ post
- some 2.5 Manila versions
-----------------------------------------
Install Steps(if you not install v0.5/6/7 beta before): (Important)
1. download pack1(from xda) & pack2.zip (from megaupload)
2. extract cabs from zip to your device's Storage Card
2. install numbered cabs to main device (not on storage card)(do not softreset, or start anything before you arrive 2.3):
2.1 01_mtp.cab
2.2 02_wp.cab
2.3 do SOFRESET
2.4 03_mtp2.cab (if this cab install failed, after all cab install go to FAQ post)
2.5 04_radarweather.cab
2.6 05_wp2.cab
Install Steps if you have v0.5/6/7 beta: (Important)
1. download pack2.zip (from megaupload)
2. extract cabs from zip to your device's Storage Card
3. go to your Today settings and disable TF3D
4. install 04_radarweather.cab
5. do softreset
6. go to your Today settings and enable TF3D
Configure Steps: (Important)
1. Start from your Startmenu "MTP Configuration" prog
2. Set your wallpaper (if not set, RadarWeather background is black)
3. press "Apply" button, and wait 2 sec.
4. close "MTP Configuration"
5. Start from your Startmenu "MTPLoader" prog once, and press "OK"
6. new TAB applied
7. i hope i configured every other things
8. do SOFRESET
9. in TF3D go to Last Tab
10. Press Weather Panel "Tap here..."
11. Select your "Units"
12. Add your City with "Add new" button
13. Add or select from list your radar image with "Weather Images" button
14. if you not see my theme, go "Display" tab and select "PhatPhingerW(ajk)VGA"
15. press power like button
16. near left config like button is update button
17.1 if your Weather image is zoomable, tap upper right corner (or little bit go left) on your pic
17.2 tap upper left corner for change your WeatherImages
-----------------------------------------
Changelog:
1.0
- fixed .dll
- changed RadarWeather icon
- updated selectable weatherimages
0.7beta
- optimized some files
- bugfix
0.6beta
- updated selectable weatherimages
- all windows and popup windows optimized for WVGA
- some bugfix
0.5beta
- optimized graphics for smoother work
- more popup window optimized for WVGA
0.4beta
- optimized TAB for WVGA
- add some graphics update for nicer interface
- many popup infowindow fit to WVGA
What's this:
- not big thing, i make new tab with MTP for Weather Panel, because standard Weather Tab not enough information for me.
What'm i doing:
- edited PhatPhinger VGA theme to WVGA for bigger radar image
- optimized graphics for bigger screen
- change MTP icons to weather icons
- add many radar image for simple using
thx:
blezalex for the MTP
storyr for the PhatPhinger IV theme
MarsWare for the Weather Panel
DOWNLOAD: (Online)
RadarWeather_pack1.zip (80KB)
RadarWeather_pack2.zip (9.15MB)
Mirror: RadarWeather_pack2.zip on Mediafire
Gallery
Beautiful work !
Just a question :
Is it so hard to replace the weather tab in touchflow than create a new tab ?
The install will be more light and more easy, isn't it ?
And in the install proc with manilla 1.3 and WM 6.1. :
2.5 04_radarweather.cab
2.5. bis authorize soft reset
2.6 05_wp2.cab
When you look for hourly temp, a little bug in the legend : Tempurature
Elodie said:
Just a question :
Is it so hard to replace the weather tab in touchflow than create a new tab ?
Click to expand...
Click to collapse
see, the screenies, MTP make new TAB, if you want, replace standard weather tab
i works very well but the weather image is not load. i have select "germany" in "Weather Images" and made "update" but there is always the main image whit the " ADD weather images" sign in the lower right corner.
edit:it works. my umts connection was the problem
i am so looking forward to test this when i get back home!
i LOVE the look of it, thank you very much for you hard work!!!!!!!!!
small issue
i am trying this out on my t-mo tp2 as it looks just awesome ....i keep getting ...weatherpanel has no data for this city please connect to the internet and download updated data im sure i am connected as i can browse the web from my device ...also whats up with the gps option???? thankyou looking forward to getting it working
EDIT: got ot to work and its excellent...thank you.... would like to know how to get the radar to work
LiquidP said:
:it works. my umts connection was the problem
Click to expand...
Click to collapse
ok, that's right
great program. had been using weather panel with second today. I now have the sprint touch pro2. the manila icon is still a white windows flag? how to change it?
badwolf said:
great program. had been using weather panel with second today. I now have the sprint touch pro2. the manila icon is still a white windows flag? how to change it?
Click to expand...
Click to collapse
I have the same issue. What cab are you using for your slider icons? That is probably the issue
please VGA version
(szia, szeretnélek megkérni nem-e csinálnád meg VGA felbontásra is, előre is köszönöm válaszod)
this content in the 04_rw.cab, i have idea, but not sure working: please disable your TF3D, restart your phone, reinstall 04_rw.cab and reenable TF3D
badwolf said:
great program. had been using weather panel with second today. I now have the sprint touch pro2. the manila icon is still a white windows flag? how to change it?
Click to expand...
Click to collapse
Wajk, what are you using for your slider, it really looks good
Great app! Installed on Topaz/Diamond2 with Netdrg ROM, configure some French cities and it works like a charm. Just few lags/issues with the Weather image, not very stable and sometimes TF3D is restarted, don't know why (it happens when I try to zoom in/out the Satellite image and it crashes Manila which is restarted).
Anyway, bravo. I will follow this amazing tool
[EDIT] I also have the white Window image tab. Then I tried your tweaks upon, but when I reinstalled the 04_rw.cab, it pop-up "enable to find Manila", I click "ok" and it installs anyway... but the White Window tab icone still there...
Wajk said:
this content in the 04_rw.cab, i have idea, but not sure working: please disable your TF3D, restart your phone, reinstall 04_rw.cab and reenable TF3D
Click to expand...
Click to collapse
Tried that so far no luck... should i try uninstalling any custom slider?
also when i deleteded the reg for the slider positions, it did not auto recreate and so i restored it...
Bug tracker : the "moon" button doesn't work properly. When I press it, the screen view doesn't change and both buttons (moon and the previous I pressed) are pressing. If I now press another button, the Night views appear during 1 sec and screen goes to the following view. Don't know if it's comprehensible :|
badwolf said:
great program. had been using weather panel with second today. I now have the sprint touch pro2. the manila icon is still a white windows flag? how to change it?
Click to expand...
Click to collapse
Same thing. Thank you to the author of this great program! Although I am not too concerned about the manilla icon being different from my current slider set.
Has anyone gotten this to work on a Sprint TP2 with the correct manilla tab icon?
Thanks!
Dave
After following cab install instructions and soft reset, I get an error on restart for MTPLoader. An issue with trusted certificates. Have also installed SDK cabs, but still no luck. Any ideas?
I have installed all cabs but cab3 as it failed, but am trying to open the MTP Configurator as it says in the FAQ and I am getting an error saying that I need a newer version of the microsoft.net framework than the version installed. Any help on how to get this? Sorry if this is an obvious fix, but I'm kind of new at this.
Edit: Ok I figured that out but now I'm trying to figure out how to do steps 9-17 in the configuration section.
Related
NOT FOR ATOM EXEC NOR HP6800 SERIES.
Could well be my last ROM for ATOM(Might have to sell it off to afford iphone )
First of all this ROM is basically an extension over JIGGS AKU 0.7A ROM ..
Thanks to Jiggs, abusalza for his kitchen my bud Garmin and all the other community members
This ROM is faster than the old one thanks to some more tweaks and newer versions..
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER
2. Total Commander
4. HTC communication manager
5. HTC Action Screen
6. PocketRAR
7. WM5torage 1.78
8. HTC ALBUM(NEW!)
9. HTC CUBE (Updated to latest version ,easier installation)
(Senses left-right movement ,Very similar to the real HTC TOUCH) Thanks to Kona_Mtbkr
11.HTC Splash Screen and Theme
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included
14.WmTask
15.HTC calculator
16.HTC Windows Media Player SKIN
17.PhotoEditor Back!
18.New Today Plugins(Retro Clock and Quick Launch)
Removed from previous ROM
1. HTC HOME PLUGIN(Can be installed ..but not included in EXT ROM)
2. HTC Touch Keyboard
The free RAM is about 20 -22 MB(with cube ,and Plugins running)
Free Storage :- 35 Mb.
Known Bugs:-
1.Extended ROM does not get unlocked(looking for a solution)
2.A2DP problems
3.Disabling Or Enabling Home Plugins Requires Soft Boot now..(FIXED!!)
INSTALLATION
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable DSUU.EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install RomConfig files on your phone memory when prompted ..
PLEASE DONT SKIP ANY INSTALLATION..
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory . and disable plugins you do not want.
HTC default theme can be selected from TODAY SETTINGS
NOW REBOOT AGAIN..
After this you are all set to go , the left softkey opens up Action Manager which gives you quick access to new messages etc.. , the right key opens up the new contacts application .
A DOWN TO UP MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
WHEN THE CUBE IS OPENED YOU CAN CLOSE IT BY SNIPPING YOUR FINGER UP TO DOWN.
FURTHER NOTES :-
1. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player(also included.) to view sites like Youtube etc..
2. In the Previous ROM Slide to Unlock was included by default ,this time i have included it as an optional .cab setup so incase you are interested you can simply install it , Note - You don't need to change the skin as thats all preconfigured in a custom CAB
3. HTC HOME also Included..
RAPIDSHARE
4SHARED
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
am gonna b the 1st to test download in progress
-------
flashing done.... appreciate puttin the black htc logo
-----
i wonder how u didnt notice the size of text in the OK or X button.... the text is so big tat its nt fittin in the box
i used the htc default today screen...... but y is the today screen scrolling? desktop is supposed to fit... not scroll
------
overall, thanks for everything
o my god..... jigg's rom couldnt connect thru BT with activesync... but this one did.... wat hav u donr bro? u somhow fixed this bt bug :O
sadhu_s60 said:
am gonna b the 1st to test download in progress
-------
flashing done.... appreciate puttin the black htc logo
-----
i wonder how u didnt notice the size of text in the OK or X button.... the text is so big tat its nt fittin in the box
i used the htc default today screen...... but y is the today screen scrolling? desktop is supposed to fit... not scroll
------
overall, thanks for everything
Click to expand...
Click to collapse
1. Quick FIX = Open programs..hold stylus on X button ..go to preferences > Skins >and DISABLE "Use a skin file for X/Ok button...
2.Disable extra plugins from today screen ..its obvious that if you have more plugins than the screen can hold , it will use scroll bars to show them all
ok, the issues hav been fixd
the touch experience is better than previous rom just tat the cube is rotatin in a funny way
Open programs menu ..hold stylus on X button for a few seconds ..go to preferences > Skins >and DISABLE "Use a skin file for X/Ok button...
You can't figure that out?
If you don't like the clock ..remove it by going to remove programs...and removing retro clock
Just finished Flashing...works well..i personally like the clock ........and love the HTC ALBUM
donated whatever i could afford to ..thanks!!
udayrulz said:
Open programs menu ..hold stylus on X button for a few seconds ..go to preferences > Skins >and DISABLE "Use a skin file for X/Ok button...
You can't figure that out?
If you don't like the clock ..remove it by going to remove programs...and removing retro clock
Click to expand...
Click to collapse
i did figure out & edited my post accordingly.... guess u saw it b4 editing
difference?
hi,
Great Job, but whats the difference between this
http://www.4shared.com/file/29744358/904a03da/TouchEdition.html
& this
http://www.4shared.com/file/30598051/4d6c9a68/TouchV3.html
cheers
This is a newer version see the first post..for more info..
is this for normal ATOM ? want to try this at my friend's phone
Yes^ it is for XDA ATOM
okay... i'l try it..
woohoo this is what I am waiting for, will be get into this. As for bugs, a2dp nahhh... I am not the one who is rock n roll over this atom. Extended rom can't be unlocked... hope this can be rectify at the coming ROM
device works fine, but mchat doesn't work( it install, but doesn't start
Will this work on Atom Life?
Just flashed into this ROM, ok just my early findings..
1. SIM Manager won't displayed the contacts for a few seconds and there are return message about network errors. However it will be ok after we wait for a while.
2. Contacts, I am find a bit difficult to 'close' it unless using 'close all' or 'terminate'. Normal close won't work.
Now I am looking for the spinning cube as what ppl are saying, is there any? oh man... feel so embarrassed with this....
hey uday my buddy... good job.
^^^Dude for the cube swipe the stylus down to up on the today screen....
yup, it's there... thanks.
Now continue discovering the wonder of touch flo....
udayrulz said:
^^^Dude for the cube swipe the stylus down to up on the today screen....
Click to expand...
Click to collapse
I hope we can run HTC plus in this ROM to make it more look like HTC lahh =) great job for the ROM
Windows Mobile® 6.1 Standard CE OS 5.2.20282 Build 20282.1.3.6 (English Only) v1.05b
For HTC Devices:
Qtek 8500, i-mate Smartflip, Dopod S300, Dopod 710, Orange SPV F600, Cingular 3100, Cingular 3125, HTC S411[/CENTER]
Author:
Pampooh [thE MAN]
Thanks to:
• Erofich
• GnatGoSplat
• CaXaP
• PeopleX
• PoorlyDuck [For the Boot and Splash Images]
ROM Development Thanks to:
• b-sstosi
• fb401
• VirusPlus
• ghost_301
• mike_buaa
• Anito - Thanks for helping me test this Final update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
1. [REQUIRED] Make sure that you have made a Registry Unlock - Application Unlock, and CID unlock on your device. (You only need to do this once before upgrading to any unofficial ROM)
2. Run Auto.bat on your PC. (Not ROM Update Utility)
3. Follow on screen instructions.
4. Wait until flash process is completed.
5. As with other unofficial ROMs, I will not be held liable if you ‘brick’ your device. For beginners, please read through the Startrek forum first before flashing your device. It doesn’t hurt to learn a bit before modifying your device.
Features:
• XIP and Core SYS from HTC s740/HTC Rose 5.2.20282 Build 20282.1.3.6
• HTC Rose Sliding Panel (Default 6.1 Panel Plugin Adopted)
• HTC Rose Phone Canvass 2G
• HTC Rose Volume Control
• HTC Rose Communication Manager
• HTC-WM New Animated Startup and Shutdown
• HTC Network Wizard
• .NETCompactFramework 2.0 (Default from HTC s740)
• WM5torage v1.80
• MS Office 6.1 with OneNote
• xT9
• SIM Contacts are hidden by default
• Key press sound turned off by default
Deleted/Removed:
• Auto Update
• Catalogue
• Welcome Center
• Windows Live
• MUI Other Language
• Landscape Files
V1.05b Change Log:
• XIP ported from Rose ROM (20282)
• Removed Weather and Audio Manager (From HTC Rose Sliding Panel, as well as their respective files).
• Transferred back to Default 6.1 Plugin for the Panels, as the Rose Panel was causing some problems with its use of the, HTCActivityLogExe.exe.
• Added New HTC-WM Animated Startup and Shutdown.
• Added Blue Water Color Scheme and Aqua Homescreen (As seen in the Screenshot, you have to switch to it manually via Settings\Homescreen).
• Added MS Office 6.1 with OneNote (this one comes from Official Rose ROM)
• Added HTC Network Wizard
• Added HTC Rose Volume Control
• Removed some unneeded .MUI Language files.
• Removed unneeded Landscape files.
• Rearranged MRU, so as to remove missing icon.
• Rearranged Start Menu, so as to group together important folders.
• Cleaned up some repeated .RGU’s.
Note:
Basically this is the a lot like 1.04, the main difference is this one uses the XIP from the Official Rose ROM, as well as the SYS and Most OEM Packages. Office and OneNote is from the Official ROM as well. I changed the WM5torage as the previous one was not functioning well. This will be my FINAL update for this release, as I don't have much time right now, and I think I have addressed most of the issues in this release. See you all when a new build is available. Don't forget to PM if ever you find newer Official builds.
Download Link:
Download ROSE v1.05b
No need to view the attached files if you're logged in, it's the same as the one inserted in the post.
Previous Versions
PointUI Home2
Hello to everybody. I just wanted to inform you that PointUI Home2 works for our device.
1. Just download it here.
2. Send to device via ActiveSync or Windows Mobile Device Center and install it from your device.
3. With your favorite File Explorer (I prefer Resco), go to '/Program File/Home2' and execute Home2.exe.
4. [Optional] You can create a shortcut of Home2.exe to your Start Menu, for easier access.
5. You can download Applets and Themes here. But you have to register. The FlipClock in the screenshot is a separate download, you can download it from the Applets section.
6. [Note] Ooops I forgot, to remove the black top bar/top bar with 'Start', as seen in the screeshot, do the following, when PointUI is loaded already, just press the left soft key, 'menu', then select 'customize', set Fullscreen to 'yes'. That's it. Enjoy.
Screenshot of PointUI Home2 with FlipClock Applet. (Yes, the FlipClock is animated)
==================================================
Hurrah Redux by TheHotOven for Pampooh's ROSE ROM.
- I did not make this Theme/Layout, TheHotOven did. I merely edited some files, .xml and .cpr in particular, to make it work for my ROSE ROM. I included some other files as well, iconbar etc., to have a complete look. Please follow the instructions step by step to make this work. Extract the downloaded files and follow the steps below carefully.
1. Copy to your Device and Install Rinku Iconbar(.cab). - Made by Rinku
2. Copy to your Device and Install Android Iconbar Addon(.cab). - Made by ShadowMike
3. Copy to your Device and Install HotOvenSmHurrah(.cab). Restart phone. Change Theme/Layout to any layout not using Rinku, Like Windows Default.
4. Copy HTCSlidingPanel.home.xml (included), and replace file in Device\Application Data\Home.
5. Copy HTCSlidingPanel_240x320.cpr (included), and replace file in Device\Windows.
5. Go to Settings\Homescreen\Homescreen layout - Choose HTC Home, as scheme.
6. (Optional) Copy to your Device and Install Black Soft Keys(.cab) and set it in Settings\Homescreen\Color Scheme - Choose Black Soft Keys, as color scheme.
* If for some reason, Rinku Iconbar is not visible, just change to another Theme/Layout, one not using Rinku, like Windows Default, set it, then just set HTC Home again as your Homescreen Theme/Layout.
* The Theme/Layout sets the time and date format, do not change it. In some cases, changing it seems to cut of a portion of the time displayed in the Homescreen. If this does happen, you can try editing a registry entry with your favorite registry editor. Just go to this registry address HKLM/nls/overrides/STFmt and set that value to "h:mm:sstt" with no space between the ss and tt.
* I got the Files from: http://www.allshadow.com/forum/viewtopic.php?f=6&t=4630 you can go there for additional information, and while doing so, thank the author of this theme as well, for his wonderful work.
Download Link:
Download Hurrah Redux for Pampooh's ROSE ROM
==================================================
Here are the links for the previous/older ROM versions:
Clean v1.00 [Uses HTC Home original panel arrangement with weather panel]
ROSE Clean V1.00
SLiM v1.00 [Uses HTC Home original panel arrangement without weather panel and audio manager.
ROSE SLiM v1.00
ROSE v1.04 [Based on SLiM, still using XIP from Erofich. Older versions of some files]
ROSE v1.04
Thanks Pampooh. Downloading now.
Pampooh
this rom have MMS Composer?
thanks
Thanks
Thank you Dude. I have installed it and have been trying it since this morning. Works great... Keep up the good work.
Anito said:
Thank you Dude. I have installed it and have been trying it since this morning. Works great... Keep up the good work.
Click to expand...
Click to collapse
works GReat for me too! This rom is fantastic, speed is very high! Thak u
Nice work, thanks. I really would like to try, but my mini usb connector is broken.
I can charge the device if I keep hold an push in one direction, but I cannot connect with active sync any more.
I know that I cannot flash from mini sd, but if we have progress on this and there is a way to do it I really want to know how.
Thanks for your good work anyway.
Thanks for the great release!
I've been using this ROM for a day now, and everything seems working great. One exception is that "Weather" in the HTC Home Screen doesn't work.
Weather is working!
ithinkurdumb said:
One exception is that "Weather" in the HTC Home Screen doesn't work.
Click to expand...
Click to collapse
You have to add WeatherUpdateService to Startup programs...
Copy WeatherUpdateService.lnk from \Windows directory to \Windows\StartUP\
Really fast rom. Great job!
Oh man, my StarTrek is in the mail (like my sig says) and I think I have to go with this as my first custom rom. This looks awesome.
Is there a way to customize the HTC Home panel for the today screen?
Thank you all for the kind comments. I really appreciate it. Thank you to b-sstosi for answering the question regarding the weather update problem. I forgot to include a shortcut in the startup folder. I'll try to fix that when I have the time.
In a couple of days, I'll upload a SLIM version. I've removed the audio manager and weather panels, as well as their respective files to give us much more space. I realized that not all of us, me included, uses the weather panel. And the Audio manager occupies too much space. Till then... Again thank you all for trying the ROM and for the kind comments...
thank you for this great rom, very fast and everything works fine
regards
I agree, this is a great ROM.
I found it a bit faster when switched to Sliding Panel from HTC Home. Unfortunately the colour scheme also changed back to green when I did that.
What kitchen are you using? I'd like to try customizing this if you allow it. Thanks again!
Tx alot, downloading right now and would much appreciate the SLIM version as well.
Uploaded the SLiM Version. Please visit the first page for the download link.
Ei, Nirak, nice to hear from you. Manalas and Slavix too. Thanks for trying out the ROM...
wheather
Looks awsome!
But I can't select the city to the wheather panel
A click on "Add a city", select my city there and when I press OK, or select or anything, nothing happend, it just jumps back to the home screen and no wheather there
Any way how to do it manually? or any help?
HTX and best regards
Ok, I got it working ... but, all it says is "unable to retrieve data ... " hmm :/
EDIT:
It works only with original cities, now with mine added thru accueweahter ...
Great, beautiful and fast ROM
thanks a lot.
but I face reseting problem, my device reset itself 2 times already within 3 hours.
It is just my device problem or anyone else have same problem.
Is it a must for CID unlock for this rom, Pampooh ?
Hi All,
Credits first , thanks to drkfngthdragnlrd for his titanium tutorial & appstar for his titanium installer! Amazing work guys! Special thanks to benven for being a very patient beta tester.
Edit 7/11: Looking for 0.5 cabs? Look here: http://forum.xda-developers.com/showpost.php?p=3868774&postcount=95 (credit jdmsleepr) & here http://forum.xda-developers.com/showpost.php?p=4106493&postcount=164 (credit hgage2003). Please note, I haven't done these cabs so all compliments/complaints should go to the poster.
Edit 5/31: Fixed the recurring task bug, now the application doesn't use State & Notification Broker but hooks into Outlook Interop. This means that the application cannot rely on SNB to start itself and hence places a shortcut in windows\startup folder. The task counter now only displays the tasks that are due today instead of all tasks (Pages placement is defined for QVGA only). This version does not require any soft-reset post install/uninstall.
Edit 5/23: Should support most of the resolutions now. If you are on some other resolution than QVGA, extract the default.plg file from default.plg.zip and replace the plg within taskanium.zip with this one before installing. I haven't been able to test the layout for other resolutions so bug reports are welcome.
Edit 5/23: Now with task counter goodness in condensed mode for QVGA in portrait mode! Why only QVGA? Because, it takes a lot of hit and trial to get the placement of the counter and requires good amount of tweaking to show it correctly & since I don't have a VGA/WVGA device; I couldn't really take it up. If you wish you can modify the default.plg file of 0.4b to include the placement of "Pages" counter in the Condensed mode for your resolution before installing 0.4b.
Taskanium is a simple Titanium (WM 6.5) plugin which displays the list of active tasks within the titaniun plugin and allows you to
add a new task
open the active task by clicking
mark the task as complete (right soft-key)
Pre-requisites
1) WM 6.5 with titanium enabled (obviously!).
2) .net CF 2.0 or higher.
Plugin view
Plugin View for QVGA (.4b build)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Add a task
Task view
Installation:
Currently, there is no cab file for installation (cause I am really tired and it's late night!), the installation is straightforward:
1) unzip the zip file within \program files\taskanium (the path is hard-wired, so unzipping it somewhere else would not work*).
2) click on taskaniumInstall file (if you don't see any error messages it means the installation was successful). * taskaniumInstaller is just a lnk file, if you know how to modify it; you can modify it to point to some other installation folder (along with taskaniumUninstall). The link files are the only place where the path is hard-wired, rest all should work.
3) soft-reset (yes, you have to else you will only see "add a new task" in titanium).
Uninstallation:
1) Click on taskaniumUnInstall.
2) delete the entire taskanium folder
3) soft-reset (required again).
The current location in plg for this plugin is set to 2.
KNOWN ISSUES:
1) completing a recurring task doesn't refresh the plugin unless you add/remove a simple task. I still haven't been able to figure out why
2) Uninstallation at times still keeps taskanium.exe running even after a reset (again, don't really know why), the work around for now is to delete the entire taskanium folder after running taskaniumUninstall & before soft-resetting.
STANDARD DISCLAIMERS APPLY, This works on my phone (asus P525 with andrewsh's rom) and should ideally work on your phone too without any issues, but if you believe it might cause something crazy on your phone DON'T INSTALL IT!
History
5/15/09: 0.1 Beta.
Change log: First version.
-----------------------
5/16/09: 0.2 Beta
Change log: Flushed the keys in installation, which should hopefully fix the issue with plugin not persisting post soft-reset.
-------------------------------------------------------
5/17/09: 0.2 RC
Change log: Defined the plg file based on layout of Appstar's favPeople to support different resolutions (haven't been able to test it myself as I only have a QVGA phone, bug reports are welcome).
-------------------------------------------
5/17/09: 0.3
Change log:Fixed the max number of pages to 15 (+2), in case there are more than 15 tasks, the last page displays number of remaining tasks and opens tasks.exe by default. This should fix the issue with people having a lot of active tasks (100+?) and the plugin going kaput.
2) Moved the plugin back to 10th position instead of 2nd.
---------------------------------------------------
5/23/09: 0.4b (taskanium-qvga-04b.zip)
Change log: Added the task counter in condensed view for QVGA portrait mode. Uninstall the previous version before installing the new one.
-----------------------------------------
5/21/09: 05b
Change log:
* Fixed the recurring task bug.
* Changed font in plg file from Tahoma to Segoe UI.
* Changed the task counter to display only due today task.
* Removed dependency on Persistent SNB.
---------------------------------
5/21/09: 0.5
Change log: Fixed a silly bug. If you have installed 0.5b, please upgrade to 0.5 to this version.
Does that use the AT installer? That means, the other panels will not be affected when installing this one?
BLAM! Finally a task plugin! THANK YOU! will test asap.
Great idea! Just downloaded. Unfortunately, all I get is a blank panel after a soft reset. If you scroll up/down, the right soft key pulls in from that panel. Titan running a 21222 ROM.
benven,
do you mind posting a screenshot of what you are getting, after a soft-reset and check in (process) Task Manager if taskanium.exe is running after a soft-reset (open Task Manager, click on View-->Processes)? Also, just trying to understand the the problem that you're having, in the collapsed titanium view; you don't see the "tasks" label but see a blank place-holder; is that right? And, if you select this blank place-holder do you see at least "Add a new task" as in screenshot#2 above? The blank place-holder could be due to the fact that I am only updating one reg key for the plugin text ([email protected]l).
This does use ATInstaller so other plugins should be un-affected.
Thanks in advance for helping me troubleshoot this.
benven said:
Great idea! Just downloaded. Unfortunately, all I get is a blank panel after a soft reset. If you scroll up/down, the right soft key pulls in from that panel. Titan running a 21222 ROM.
Click to expand...
Click to collapse
benven,
can you test out the latest build, this should hopefully fix your plugin blank issues after a soft reset?
Thanks!
Installed it on my Touch HD but it doesn't work - doesn't display any panel...
Invisible Sense said:
Installed it on my Touch HD but it doesn't work - doesn't display any panel...
Click to expand...
Click to collapse
Please read the first post, it's QVGA only (for now) and doesn't support Touch HD (WVGA). The current default.plg only defines layouts for QVGA portrait and landscape mode only.
Hi sn123. Thanks for all your help. I don't have screen snapshot software on my device. I'll download the latest version and report back.
Hi sn123, tried the latest version. But I still get the same result Attached is a screenie scrolling down from the music tab.
benven said:
Hi sn123, tried the latest version. But I still get the same result Attached is a screenie scrolling down from the music tab.
Click to expand...
Click to collapse
benven, do you mind sharing your titanium_240x320.cpr file?
apologies for more questions, but if I understand correctly that once you select the blank plugin; the right soft-key does change to something like "Complete or New"; it's just that you don't see any text either in "condensed view" (when the plugin is collapsed and even if you select the blank plugin, is that correct?
Yes, the right soft key changes to the panel's right key I was at previously. So for the attached example I went from the music panel to the task panel and it picked up the right key for the music panel. Also, nothing happens when I press on the panel or use the right soft key. Could it be the number of tasks?? I have probably over 150 tasks sync'd up. cpr file attached.
benven, I think most probably the blank task panel is due to the customized theme that you are using (the one that you are using is not the titanium default) and has nothing to do with number of tasks that you have (I have tested it with around 100 tasks on my phone and it does work).
There are two things that you can do to hopefully get it to work:
1) Open the default.plg file in taskanium folder in a text editor and change the position to 1 from 10 (within <position></position>
2) Replace all instances of Tahoma with Segoe UI.
After you make these changes just install it again and hopefully it should work. You can also use the default.plg file attached (remove the .txt extension) with the above 2 changes already made and replace the existing plg file with this one.
If it still doesn't work, you can help me further in troubleshooting by using a registry editor (like CERegEditor) and tell me if the following keys are created:
1) HKLM\Software\Microsoft\CHome\Taskanium (there should be at least 2 subkeys within this: 1) CondensedPage & 2) Page1.
2) HKLM\System\Notifications\Taskanium.
From the bliss theme post: http://forum.xda-developers.com/showthread.php?t=508968
When using third-party or cummunity plugins such as TitaniumWeather, Favorite People make sure you re-install this theme cab after installing the plugins so that the theme and the plugins can coexist together. It doesn't matter if you already have this theme installed and you decide to install the additional plugins, you must install this theme cab after installing any plugin that is supported by this theme.
Supported community Titanium plugins:
-TitaniumWeather by showaco
-CTwitter, COffice, CFacebook by JukEboXAuDiO
-FavoritePeople by AppStar
-Programs by Sector (aka giorgosm)
Click to expand...
Click to collapse
This kinda makes me believe that the issue is compatibility with the bliss theme; I'll check with rpereira.
Can anyone else also try this on a QVGA device on default theme and let me know if it is a yay or a neigh? Thanks!
claus1953 said:
Does that use the AT installer? That means, the other panels will not be affected when installing this one?
Click to expand...
Click to collapse
yep it does.
VGA Please
I have been wanting this plugin since 6.5 became available. Can anyone port this to VGA?
mlin said:
I have been wanting this plugin since 6.5 became available. Can anyone port this to VGA?
Click to expand...
Click to collapse
just posted the VGA support, enjoy .
PS: Hope you are not on bliss theme too
Wow! You're fast!
Hi sn123. First off thank you very much for your time and help. I uploaded the default.plg file. Checked the registry. All keys are in. I guess I have 118 tasks! Anyway, uninstalled/reinstalled, Taskanium and the Bliss theme on both my Titan and Apache. I am sad to report that it still does the same thing . It must be something with the theme. I'm sure rpereira can help out. He seems like a really good guy and resource. Then again, maybe it's me that's not doing something right! Anyway, I'm going away for a week, so I'l check back when I get back.
sorry that it didn't work for you . It could be due to the number of tasks (perhaps titanium has a cap on number of pages that it would show!). For 15 tasks that I tested it with it seemed to load all the pages.
Once I have some free time, I will perhaps create 118 dummy tasks just to test out .
I am very interested in this project. Will this plugin play nicely with my other titanium panels (incl. Titanium weather) or will kit try to rearrange and/or disable them?
Manila 2D 2019191432.04 Theme which now Has Matching FootPrints tab
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Here:
http://www.mediafire.com/download.php?ltzy2owj22z
This theme Matches the Manila Sense found on the HD2 and it has been optimized for use on small power devices again this will only work with Manila 2D 2019191432.04 so will integrate into TouchFlo 3D Look II this theme was painstakingly optimized by Paul Days and all credit goes to him
Download Here:
http://rapidshare.com/files/363061483/Paul_Days_ELFin_HD2_Op_d_Theme.cab
FootPrint tab skinned to match the above theme with new footprint tab icons
Download here:
http://www.mediafire.com/download.php?jymzezg4tvl
Rotating Clock option
This clock rotates instead of flipping it works much better on the prophet and the way it's cleverly animated looks so cool you can just install the cab file below after installing the above theme here is how it looks
Download Here:
http://forum.xda-developers.com/attachment.php?attachmentid=233915&d=1254582609
Special thanks to S.V.I for his cool clock
Status Ticker
StatusTicker is an app to replace the Carrier Name with a status monitor. The ticker will display phone info, weather, stocks, sports, you name it.
The Carrier Name appears on lot's of Windows phones but is usually static and we have all forgot it was there.
Not only does it display on the home screen panel, but also tickers on your incoming and outgoing calls. I know, sweet.
- It only works when you want it to. If you can't see the info the ticker sleeps.
- Low battery warning and ticker hibernates.
- Now playing track info from windows mediaplayer.
- Works on PPC as well as SMartphone.
- Works on Windows mobile 5 and 6! Take that Titanium.
- New Missed call alerts. You can set the frequency in the ini. This is the spot for other important alerts to get in the short line.
- Seperate ini file for your settings
- Application Program Update reporting
Ticker Styles:
- Appear, Step-In, Tape, Pop, Flash
Download Here:
http://forum.xda-developers.com/showthread.php?t=574557
Task Manila
Finger Friendly tasks This application sync with your outlook tasks. It operates directly with tasks stored in device.
Download Here:
http://forum.xda-developers.com/showthread.php?t=591794
Colour TaskBar Icons
Download Here:
http://www.mediafire.com/download.php?jzkmmnmmyam
New skin for XDA Shut Down
Download Here:
http://forum.xda-developers.com/showpost.php?p=5034771&postcount=449
Download Here:
Windows 7 style Boot Logo
Custom Tab in Manila
This will add a Calendar Tab to your Manila TouchFlo 3D look making use of the redundant TV tab here is a screen shot
Again this will only work with my TouchFlo 3D Look II ROM or the above theme installedso if you are not running it please don't install it as you could find your self doing a HardresetInstallation:
1/ Install the cab file and soft reset
2/ GoTo Progams\Tools And Open M2Dtp_Config
3/ just Click Apply (bottom Left)
4/ Click menu then Exit and exit the Config
Your Calender Tab should now be working you can change the settings for the Calender by touching the small icon in the top right of the screen
More to Follow tutorial on how to add Battery Status for overclockers
After installing and rebooting don´t work manila 2d
our hero~~~~~
dear [email protected],
can I have them cooked in my 20755 ?
Thanks again to dear [email protected],
one of our best cook
Good job dear @wapvirus. I will try it to track performances...
I have posted these for all to use i will add a new theme when i get permission from a Member for a nice clock option but please feel free to use these how you wish
skymaster00 said:
After installing and rebooting don´t work manila 2d
Click to expand...
Click to collapse
Ok this is for Manila 2D 2019191432.04 Manila only
ok thank..... i go try...... but could you tell me that rom has this exactly manila....
skymaster00 said:
ok thank..... i go try...... but could you tell me that rom has this exactly manila....
Click to expand...
Click to collapse
well i think only one at the moment
http://forum.xda-developers.com/showthread.php?t=573152
Thanks to you wapvirus
wapvirus said:
Click to expand...
Click to collapse
How can I change to it ?
mostafa0007 said:
Thanks to you wapvirus
How can I change to it ?
Click to expand...
Click to collapse
Not sure what you mean if you mean the skin in the screenshot then you must install xda shutdown first then copy the skin to the install folder
If you mean the ROM then you must follow the upgrade guides
thanks... it was nice... thanks wapvirus...
Is it a Theme or "real" manila 2d
zhuoyang said:
Is it a Theme or "real" manila 2d
Click to expand...
Click to collapse
It is a theme for Manila but the touchflo 3d look rom is using this theme
Updated Post #4 with new calendar tab
I can't get Calendar to work.
I have a WM 6.5 ROM (for Kaiser, by Teijak) with the exact Manila version (at least the ROM thread lists that version). I downloaded and installed your theme without problem, and the calendar cab installed without problems, too. But on the reboot, when the device is starting TouchFlo it complains a about a registry /HKCU/Software/Manila2D_TodayPage error. When I manually add that as a folder, this startup error disappears, but when I launch M2Dtp_Config it complains that it's for "TodayPage ver.0.3.x".
What am I doing wrong? Or what I can do to manually fix the problem?
(I had installed a TodayPage 0.2.1 cab in the between. I.e. I installed your calender cab, it didn't work, I unnistalled it, installed the 0.2.1 cab (in the hopes that it would create whatever registry entries were missing), then installed your calendar cab again, which caused the 0.2.1 cab to be uninstalled.)
Any help would be greatly appreciated.
EDIT:
I have now tried installing a TodayPage_0.3.0 cab, noting the registry entries this produced. Then I reinstalled your calendar cab, which uninstalled the 0.3.0 TodayPage along with all the registry entries. I then manually added the registry entries again before soft-resetting. Now I'm getting a startup error that no page is specified, and when I start the config, almost all fields are empty, and "Apply" is greyed out and unclickable.
rnfldt said:
I can't get Calendar to work.
I have a WM 6.5 ROM (for Kaiser, by Teijak) with the exact Manila version (at least the ROM thread lists that version). I downloaded and installed your theme without problem, and the calendar cab installed without problems, too. But on the reboot, when the device is starting TouchFlo it complains a about a registry /HKCU/Software/Manila2D_TodayPage error. When I manually add that as a folder, this startup error disappears, but when I launch M2Dtp_Config it complains that it's for "TodayPage ver.0.3.x".
What am I doing wrong? Or what I can do to manually fix the problem?
(I had installed a TodayPage 0.2.1 cab in the between. I.e. I installed your calender cab, it didn't work, I unnistalled it, installed the 0.2.1 cab (in the hopes that it would create whatever registry entries were missing), then installed your calendar cab again, which caused the 0.2.1 cab to be uninstalled.)
Any help would be greatly appreciated.
EDIT:
I have now tried installing a TodayPage_0.3.0 cab, noting the registry entries this produced. Then I reinstalled your calendar cab, which uninstalled the 0.3.0 TodayPage along with all the registry entries. I then manually added the registry entries again before soft-resetting. Now I'm getting a startup error that no page is specified, and when I start the config, almost all fields are empty, and "Apply" is greyed out and unclickable.
Click to expand...
Click to collapse
The you need to add the plug in to today page this i why you get errors
you have not set up todaypage so no page is specified
just open today page post or whtealiens mega manila post there are many tutorials on setting up today page i don't have my old device any more so i can't run it to describe how to setup manually sorry
Updated optimized sense theme added to post #1
ExtendedFileExplorerExtv.0.3
Version History
v 0.3
popup menu smaller
All menus text smaller
some start menu tweaks
Keep in mind this is remaining fairly universal, If you have problems PLEASE REPORT THEM!
v 0.2
Display a horizontal scroll bar, add features column replacement
Anti-freeze - problems at the end
v0.1
Original Combo and testing, works great.
Bugs
None that I am aware of yet, please let me know if there are.
Plans
I am actually planning on making this a full UI mod eventually including tweaking for the abnormally large menus in wm 6.5
Description
Want to say that this is merely the combination of two VERY excellent additions to file explorer for WM. Those are: FileExplorerExt 2.07 by Hou Ming and ExplorerExt by RAMMANN. So credit goes completely and totally to them.I just combined the two into a single cab. Package version for cooks is attached as well.
Features:
- You can select any folder to display the folder tree when you tap the folder name in the upper left.
· Tab or Esc key to display the folder tree too.
- You make up the file list in the left and right keys.
· BS key parent folder.
- The parent folder and press the left top of the list of files.
- Choose the first non-press file on the top of the list of files and file focus state at the end →
Select and change the focus state.
· WindowsMobile6.5 tap to the left when the action flick in and hold the menu
Tap the file or folder and adds the following menu items hold.
- Opens with the parameter (exe files only)
- Copy Path
Copy to clipboard full path names of selected files
- Send a shortcut to the program (exe file only)
Shortcut to \ Windows \ Start Menu \ Programs Create
- Open program
Open the file in the Open list.
+ Start menu program list is displayed in the same program.
- Property
Display Properties screen.
- File Name
Displays the file name with extension. You can also change the file name.
- The contents of the shortcut (only for shortcuts)
Show shortcuts / can be edited
- File Types
- File
Display the file in bytes.
If memory card space, the unit displays the total amount of MB.
- Last Updated
Date updated file and displays the time.
- File attributes
Read-only attribute to show hidden files / change.
- Version information (if the version resource)
Advise: ROM can still change file properties
Tap the file is not part of the menu and hold (WindowsMobile5.0 later Toolbar
Menu as well) adds the following items.
- See Extension: Extension Display / hide sets. When installed to view the extension
Has set.
- Image Preview: when you move the focus to an image file, or in WindowsMobile6.5
When the action flick to the right, (if possible) to preview.
WindowsMobile6.5 tap change and transparency in the image preview
- Details: Change the format verbose. (PPC as a standard condition)
- Details (with headers): Change the display format display with header information. When installed
This display format.
- Icons: Change icon view format.
Display Options - "Show all files" when you specify the file also shows the ROM module
ROM file to the same name - paste (overwrite), will make a
- Horizontal scroll bar appears on the screen not fit column
* You can drag the column and change the display order by dropping
DEVICE UPDATE SUPPORT! Even if you dl it from here, it will show up in Device Update if I update the app
Some pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
v2
v3
I would encourage you to download Device Update by crc and get it from there. If you want to go that route simply goto http://crc.id.au/deviceupdate
Otherwise you can download it from below. Zip version is the Package version for cooks. Cab is for end users.
**VIVA LA ATTENCION!!**
It has come to my attention and this is my own fault tha everyone may not like the setting I have set the font to, well no problem, grab your fav reg editor and play around with the followibg values ubtil its comfortable:
[HKEY_LOCAL_MACHINE\System\GWE\Menu\PopFnt]
"Ht"=dword:00000258
[HKEY_LOCAL_MACHINE\System\GWE\Menu\BarFnt]
"Ht"=dword:000002bc
[HKEY_CURRENT_USER\Software\Microsoft\Today\ListVie w]
"ListViewSelectorThemeImageMaxHeight"=dword:000000 5e
Sorry to all who didnt get the support during my net issues.
***INSTALL TO DEVICE AND REBOOT! DONOT INSTALL TO SD CARD!***
Thanks so much nice ext
thanks, 2 apps in one!
Thank you.
looks great.
Thank you
Merci aestivalisakito
Thanks
very nice, I cannot wait to see more work (the UI/Bugs/Tweaks whatever else I can find out in the next 2 weeks)
Updated to version 3 refer to the first two pictures for the diffrences between v2 and v3, the menus both context (popup) and actual browsing through File Explorer are smaller. Note I am a giant, 6'6" tall with hands that engulf most and the menus are still too big, now that they are smaller it more convenient.
installed the new version but did not like the more compressed items. uninstalled it and yet it's still compressed and did not go back to the more open format. is there a way to get the original format back?
Im on Kaiser QVGA and this app works fine here.
Thanks for your work.
Can you post the zip for cookers?
Cheers .
sadly, 2.07 of the FileExplorerEXT doesnt display file previews anymore, until the next release to fix this, you should revert to 2.06 or find out why 2.07 isnt working anymore...
Great app, but I have a bug. It removes the arrows from all of my scrollbars!
SE X1 running WM6.1
Edit: A second soft-reset fixed it
v 0.3 Installation didnt finish!
HTC HD. Had to softreset and can't install v 0.3 ...
Where can I find v.02 ?
Mittaa
Using it on HTC Hinalaya with WM 6.5.3 build.
Very good for QVGA devices.
Sascha
thank you working good
Not Working
Thank you very much for the effort, but mine did not finish the installation either. I will wait for a version without the problem, and try to install it again, since it is a nice app. BTW, I like the small spacing! Cheers HTC HD2 Dutty 2.9 Rom
I just installed 0.3 on my HTC Touch Pro (Sprint) which has a VGA (640x480) screen and runs WM 6.1. Now, the menu in all other applications is VERY small. I hope you can fix this soon as it maked my device VERY hard to use.
Thank you
Nice little collaboration, good job!
Kindest regards,
One short Question i don't see answered in the Program description:
Does it work under Windows Mobile 6.1?
BUGS:
-HD2 freezes and has to be softresetted when closing file explorer via mmtask (Morose Media Task Manager, available at the marketplace (Germany)).
- The orange highlighting used in the file explorer appears also in the marketplace. There it is slightly displaced.