just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
dolphinxda said:
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
Click to expand...
Click to collapse
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
zen_usuario said:
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
Click to expand...
Click to collapse
Thanks for ur commend man! i also tried to flash Eboot.nb0 fro SD card on that time, after place Eboot.nb0 on sd card, Enter boot loader by taking out battery Press Send + End button for a while, put battery back.
it show HP boot loader around 5 to 10 minutes, restart, every the same.
please Sir dolphinXDA
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
dolphin XDA pls help sir
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
playvoice_17 said:
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
Click to expand...
Click to collapse
Sorry guy m not a cooker, m a user like u too. what i wrote above just a sharing with u guys. it's a mistake coz i want to use rom that is stable for HP.
I have tested all 6.5 ROM from PDAViet but bluetooth and wireless not working well, on the other hand rom from PDA Viet not a clean one.
Now day i still using 6.1 from Helloworld1, may i recommend you to use 6.1 by Helloworld1 till we can found 6.5 clean ROM like Helloworld1?
Related
I would deeply appreciate someone informing me how to reload the rom on my PPC i-mate from scratch. I completely zapped it . The screen just shows USB V1.01 and thats it.
What do I do from here?
How do I talk to the device to reload the image file?
Is there a hard reset and some kind of installer program to run that the computer will detect the device from this state.
Active synch is not detecting the device i assume because there is no operating system on the device.
Another form said to get a new rom and reflash but how do I do this , where do I start.
Regards Jim Mete :?:
reload rom from boot loader stage
I am interested to know how to reload the rom from scratch.
Jim
Come on, Jim.
The forum is full of topics and postings with the informations you're asking for.
Move your mouse, click on and search the forum.
Chuck
Hope anyone can help me - i' am still stuck - after trying and reading posts for 6 hours. i tried to flash the touch flo w6 rom on my charmer. activesync disconected during the flash proces. charmer does not start anymore - but i can get to bootloader screen.
But all roms i found and tried to flash need an activesync connection. could someone pls let me know how to flash from bootloader without active sync and where to find such a rom - if possible a w6 - if not w5 is also very very welcome!
Thanks a lot in adv!
are you using Vista ?
Good morning Urkraft!
Actually I do - but if nessecary I have ease access to a Computer running XP.
you need to use a PC running XP, then please try to flash the base ROM as Vdlock mention in his thread : http://www.tm-phonedownloads.com/fil...ileUK_Ship.exe
Reset to bootloader then connect teh USB cable to an XP machine and run teh above shipped ROM installer
Please make sure you do this before your goes flat, if you notice now it might not be even charging ...
Charmer is running again! Tks a lot Urkraft
And yes - I tried again - WM6 is running fine!
the link doesnt work is there a new one?
The link is dead... Please.... somebody help
Please update the link, it's dead and i'm in really need. Thanks in advance!
Hi erveryone,
have anyone tried to run Googles Android rom on the Prophet device.
Is it possible to port the Android to Prophet.
That's idea for a new ROM for the Prophet.
Android looks nice.
Would be great if one of the gods culd port it to our Propets.
is it possible to start android with haret from the prophet device.
There is an Version of Android for the Kaiser device.
I want to test to start them on my Prophet.
Have erveryone has tried to port Android to Prophet.
Is anyone interrested in a change to start Android on Prophet or make a realy Rom
I have downloaded the kernel image an the android from the wizzard forum.
Then i startet all with the Haret Bootloader.
It boot to the Red Dot (Knight Rider) and after a few minutes it hangs off.
My Prophet is found by Haret as Wizard (i have the coffie Rom).
When i use an other Kernel Image then Haret Boot but Android doesn't do it.No Red Dot.
This are my first Tests but i'm a noob in Linux.
I look an test other Kernel images.
Other Android Source works as the orginal is used.
I hope somebody else tested to start Android on Prophet device.
I think it is possible. Omap 850 ofcourse isnt slow as most people think of its 195mhz and it has 100Mhz DPS + 50Mhz arm7 and it is powered by fast 2D graphics chip, so it is definetly possible. I also find on youtube the smartphone with 201Mhz omap 850 on android with qwerty and 320*240 touchLESS screen(it isnt such problem just drivers)
I also had a try with android, but it simply stayed white
Lets pray that it will work once on our prophets
Yes this problem i just have many Times for my Tests.
Then the Kernel image or the Android image is wrong. First i thought the Kernel is wrong but after some more Test it is possible that both can make problems or try another version of Haret.
But all i tried is the same problem Android stuck at the Startscreen with the Red Dot.
Here in the Forum is an big Post of Android and there is a long to a bootkit for Kaiser thats files wich works to still my problem. And there are many links to different versions of Haret just trying for a working one.
anyone has already put android on S200?
I put once the android on my prophet.It worked, but it needs almost 15 minutes to boot, the touch isnt working and its really slow.
and with the final version of android, no good news?
well when i played around with Linux i gave up with prophet as it's to slow like in the post earlier took ages to boot and needed things editing as the version i ran was intended for the wizard close to our device but different internal hardware so not much worked I think the prophet is not up to the job and that's why it was abandoned
http://sourceforge.net/apps/trac/wing-linux/wiki/Devices
They said that Prophet is Officially Supported by the project.
Somebody try to run?
I cheer this rom
05DC said:
http://sourceforge.net/apps/trac/wing-linux/wiki/Devices
They said that Prophet is Officially Supported by the project.
Somebody try to run?
Click to expand...
Click to collapse
gonna try this one
This Wing Linux and Android Running from my HTC prophet (Dopod 818pro)
Status For HTC Prophet from this Wing Linux and Android
Status
The following list of features is as of the latest development release (currently 0.4pre3). Later development may have greater functionality -- keep up with #wing-linux and #linwizard for the latest.
Working
Feature
Booting Linux Works
Booting Android Works
Framebuffer Works
Backlight Works
Touchscreen Works
Keyboard Works
Extra buttons Works
USB Works
LEDs Works
Mini-SD Works
GSM Works / In work The linwizard GSM module works -- calling out is successful, as well as data communications over PPP. Android support 90%. PINs for locked SIM cards are accepted, but network still does not work yet. If you are having trouble with GPRS, try setting your APN.
Real Time Clock Works Fully functional real time clock. Time/date set from GSM.
Bluetooth Works Linwizard unstable driver works, full Android support
Not Working
Feature
Battery Not working
Camera Not working
Audio Not working
Instalation
1. Download Android-prophet.rar
2. extract /storage/
3. in folder /storage/linux, run haret-0.5.2.exe
4. leave the installation running automatically, this will take some time. most likely around 5-10 minutes.
7. try it Now!!
Download From my FTP
http://rapidshare.com/files/269990061/Android-prophet.rar
dionipe slow downloads!!! Upload rapidshare.com.......... plz
romik-us said:
dionipe slow downloads!!! Upload rapidshare.com.......... plz
Click to expand...
Click to collapse
OK bro, plz wait
does someone try it yet?...
Mirror on Rapidshare
http://rapidshare.com/files/269925781/Android-prophet.rar
--dobbel post --
I am using CE OS 5.2.20753 Build 20753.1.4.0 PV SB on O2 Atom Exec. I am trying to flash my ROM with any of the provided ROMS in this forums rite from WM5 till Jamies latest ROM.
As a background, I have already configured my mobile in VISTA laptop using the MANUALS & RAR files, provided around a year back.
The problem is as follows:
1. I run the package, which internally unzips all the files in C:\Windows\Temp
2. DSUU starts executes and provides a screen to select OS, OS+Extended ROM, OS+Eboot only, etc....
3. I tried using both ALL, OS only, OS+Extended ROM but i get the error as mentioned below.
4. I get a screen which speaks about all the my current RADIO, ROM version and the TO BE new versions.
5. I select OK / Continue.
6. Program reboots my Atom exec and stucks in "USB CONNECTED" black screen. This continues untill i try to manually terminate the DSUU process.
7. To recover from this, I remove the battery manually and insert and start the phone.
8. Phone starts working from the stage where I started flashing with new ROM.
I am totally confused as i tried a lot of ROMS rite rom Wm5, WM6 & WM6.1 which also includes all the ROMS, which i have already used in the past on the same phone.
Gurus, please suggest the possible wayout, as i am stuck on this ROM for a long time and unable to test all these new wonderful ROMS.
ASH
use win xp not vista in flashing roms...
Use the search function, there is an answer to Your question in some of the forums at xda-developers and it is posible to flash roms from VISTA, but after doing some reinstalation on USB drivers and some tweaking....try to find VISTA ROM UPGRADE
My experience is:
I followed the instructions and they worked 2 times and I have flashed the ROM twice, I dont know what happened to my computer because after that never again make it to work in vista.
I whish You Could!
Thanks
Thanks for the suggestions. I have flashed this mobile around more than 20 times out of which atleast 10 times in Vista.
My problem is, after flashing the current ROM, i am unable to flash on this device. i tried flashing other device from the same laptop and it works
When i start the flashing procedure, mobile enters into Boot mode and then nothing happens. i remove battery and mobile boots up with the same old ROM.
Please helppppppp
ASh
I am an inexperienced user and have a few simple questions. I have a touch dual originally from orange uk. I've done the cid unlock thing and found that fairly easy.
I want to upgrade the system to 6.1 or 6.5. Can i copy the system on the phone already so I can revert back to it if the new version ***** up?
Is it better to put on a more worked out 6.1 rom than the new 6.5 which may have a few glitches since I'm not a great tinkerer or will the 6.5 provide a stable load and forget solution.
Finally which is the best rom out there for stability and features and user friendly.
to revert back, u'll need to fully backup your old wm6 before flashing the new ROM. if u don't like the new ROM, flash back your old ROM and restore from the backup and u're back to square one.
if u want stable, forget about wm6.5. stick to wm6.1.
I'm happy enough backing up my data side of thinggs. How do I back up my operating system or do I have to download a wm 6 operating system in the same way I down load the 6.1 system?
If you search around the forum there is a copy of the OrangeUK ROM on here (singed, with radio) I have it sat on my PC from a while ago.
Infact, I found it:
NetrunnerAT said:
Original Full OEM Roms!
RUU_Nike_HTC_PTG_13141009_Radio_Nike_1581627_signed_Ship
RUU_Nike_HTC_RUS_13141109_Radio_Nike_1581627_signed_Ship
RUU_Nike_HTCASIA_AUS_13171012_Radio_Nike_1582123_signed_Ship
RUU_Nike_HTCASIA_WWE_13170709_Radio_Nike_1581627_signed_Ship
RUU_Nike_ORANGE_UK_1316110_Radio_Nike_1581627_signed_Ship
RUU_Nike_SingTel_WWE_13187114_Radio_Nike_1581627_signed_Ship
THX to all guys, they have shared those Roms with me!
Click to expand...
Click to collapse
Taken from web page: http://forum.xda-developers.com/showthread.php?t=373452&page=1
Post 4
Wez.
that s excellent thank you very much. Can anyone recommend a good 6.1 with all the bells and whistles?
I personally use Salvy.C.83's ROM. Not found any real problems with it and the battery drain is much less than any other Manila 2D ROM out there.
Find it here
Happy flashing
Wez
Thank you for your help so far.
To do it to the hard SPL 1.22 do I need to go through the following routine
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
9. after installing the hardspl you can flash any rom
Just subsidising the new hard SPL 1.22 at line 8. Or can I miss out all the sspl part and just go straight in at line 8?
Sorry if I'm coming across as bit of an idiot.
Right routine:
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.22-nike.nbh by running Nike CustomRUU.exe
9. after installing the hardspl you can flash any rom
10. Update your radio at last 1.65.xx (last official here)