ProClip Holders are now available!! - Touch Pro2, Tilt 2 Accessories

For those of you waiting for the ProClip car holder for your TP2 or Tilt2, they are now available.
ProClip
No, I'm not affiliated with this company in anyway, I just love these holders, and have been waiting impatiently.

I like that it allows it to slide open while being held, but it also doesn't hold it with a case on, so it's a non-starter for me.
I like to go with a car-specific mount from Panavise & a holder from Arkon.

I've got the pro-clip holder on order. I've had one for my Tilt and Fuze, and they are solid.
The device specific holder actually mounts onto a car specific mount. In my case, it attaches next to the shifter in my S2000. And yes it does suck that you can't use a case. But I prefer film type protectors like InvisibleShield to keep the bulkiness of the device to a minimum.

SacTilt said:
, I just love these holders, and have been waiting impatiently.
Click to expand...
Click to collapse
Am i missing something here, thats a brodit mount? and has been available for months?
www.brodit.com

fil said:
Am i missing something here, thats a brodit mount? and has been available for months?
www.brodit.com
Click to expand...
Click to collapse
They actually come branded with both names on them (ProClip and Brodit). If it's been available for months, then that's news to me. I've always purchased through ProClip, and they just became available on their site.

fil said:
Am i missing something here, thats a brodit mount? and has been available for months?
www.brodit.com
Click to expand...
Click to collapse
They've been available for GSM TP2's for a while not CDMA, at least not if you wanted the powered one. Its Brodit over on your side of the pond but its called Proclipusa over here. You guys got it first because the phone came out for you earlier.
The only one available for the CDMA version on their site is the non powered version which is the same exact clip as used for the GSM version. I'm beginning to wander if they are even going to make a powered version. There are good non powered clips made for this phone that are a third the price. $35 bucks for what they are offering is quite frankly a ripoff.

I am excited to see the ProClip finally appearing, but I'm hesitant to buy. I know there have been smatterings of this discussed elsewhere, but my main concern is sliding a holder into a groove that doesn't quite exist.
There is no gap between my phone and my keyboard. Forcefully wedging a piece of plastic in there will clearly create one, but that doesn't make it a good idea.
Those of you that have been using these for years don't seem to have any issues with this, but I need some assurances that this won't compromise the slider component over time.
Since I personally have no reason to slide the keyboard out while mounted in my vehicle, I would strongly prefer a holder exactly like this, but one the entire phone slides into, not just the keyboard part. Does that exist? (And no, not a bulky universal one.) Already have that and thumbs down...
Any thoughts would be appreciated.

glw35 said:
There is no gap between my phone and my keyboard. Forcefully wedging a piece of plastic in there will clearly create one, but that doesn't make it a good idea.
Those of you that have been using these for years don't seem to have any issues with this, but I need some assurances that this won't compromise the slider component over time.
Any thoughts would be appreciated.
Click to expand...
Click to collapse
I have the one for my original Tilt. The phone is in and out of the mount 30+ time a day. The mount lasted for about 2 months before the beginnings of failure.
One of the thin pieces of plastic on the mount, that slide into the gap between the two halves of the phone started to break off.
It took another month or so before the piece had completely gone. This allowed the phone to fall out rendering the mount useless.
I was able to put a piece of fuzzy Velcro on the mount to wedge the phone securely into place.
Two years later I I still have it. Now its time to order the one for the TP2

Related

Car Cradle

Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse

Tilt 2 Car Mount

I know theres a thread on the Touch pro 2 Car mount but i dont know if any of those mounts work for the Tilt 2. I'm looking for something that fits nice and clips to the vent sturdy and also can rotate to landscape. I searched and searched and googled and cant find anything remotely good.
I bought a universal one but it was garbage
I know Proclip / brodit makes great car mounts but i cant justify paying 70 bucks for a car mount. ( 35 for the mount and 30 for the car mount part )
Sorry for making a new thread for this but i see a ton for the Touch pro 2 and still dont know if those will work with the tilt 2. Thanks for the help in advance
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4013wt_939
Anyone know if this will work with the Tilt 2?
dash mount
Best one I've found.... I hate Best Buy but they were the only ones in town with a decent mount. It was 24.99, a little more than I wanted to spend, but well worth it.
http://www.bestbuy.com/site/Xentris...lack/9072399.p?skuId=9072399&id=1218022585746
Nate
They should make a Better one
with charging dock like other Phones have
ilordvader said:
They should make a Better one
with charging dock like other Phones have
Click to expand...
Click to collapse
These days it seems like you're pulling teeth in terms of getting accessory developers to develop accessories for any non-iPod/iPhone devices...
This is the Bets one I found till now - HERE
most adjustable
I just ordered this one for a Tilt2. For $13 delivered it doesn't look to bad. I don't believe the TP2 exact fit ones will work with a Tilt2. I would be nice if one came out soon.
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
anit77 said:
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
Click to expand...
Click to collapse
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
marcini said:
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
Click to expand...
Click to collapse
I did it here.
Again I'm weary of TP2 exact fit holders. That one is labeled for T7373, the Tilt2 is T7377. There is a small size difference. It does look decent though.
I drive a GMC Sierra and have been looking for a dash or vent mount. A windshield mount puts the phone out of arms reach.
krystos said:
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
Click to expand...
Click to collapse
Actually this one is available. I've already got one in my truck for my Tilt 2.
be VERY careful with vent mounts. Your AC can make your phone cold causing it to condensate when you exit the vehicle and walk around outside ESP in high humidity areas thus voiding your warranty
proclip
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
moonwulf said:
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
Click to expand...
Click to collapse
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
DarienA said:
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
Click to expand...
Click to collapse
I have the same holder, and yes it does. It also allows you to open the keyboard.
igrip
i have the igrip custom mount for my fuze, i like it a lot, and the mount detaches from the goose neck. they make several mount options that can connect to the custom clip. the have one for my mountain bike, so i can attach it on the trails and use some of the gps features with a program i downloaded here on xda. They also have some more solid mounts that dont move around as much as the goose neck. I am getting a tilt 2 real soon, as soon as my contract is up for upgrade... (next week).. would love to find a custom clip for it that works with the igrip mounting options, has anyone seen one. i dont see a custom clip for the tilt 2 on their website.
igrip
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
kmartin888 said:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
Click to expand...
Click to collapse
Yeah i had a iGrip for the Fuze as well and i loved it. I am wondering if they say TP2 if they work with the Tilt 2. Im not sure if the specs are exactly the same or i would be buying this one here for sure
Take a look. Anyone know if this works with the tilt 2? I think i posted this earlier too and no one answered
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4110wt_939
The one
I think that this one will do it for ya
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspxhttp://images.google.com/imgres?img...M+Custom&hl=en&safe=off&sa=G&um=1&newwindow=1

Car mount

http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?

car mount

Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.

ProClip car holder for the Nexus 6

I just had a chat with ProClip USA, they said that they will be making a custom holder for the N6.
Tal; We will be designing a holder for the Nexus 6. This design process generally takes between 4 and 6 weeks once the design team obtains the device, but can take longer depending on the device. Once we have a custom holder available for your device we will send you an email with a link to the products.
Tal: If you want to provide your email we can add you to the email notification list. Once the holder is available you will be notified via email.
Click to expand...
Click to collapse
:good:
I have had proclip holders for my , N4, N5, & HTC M8.
They are pretty good if you haven't heard of them before.
-J
Does the charging cable stay in place so you can just slide phone in without having to actually plug the phone In your self?
frigidazzi said:
Does the charging cable stay in place so you can just slide phone in without having to actually plug the phone In your self?
Click to expand...
Click to collapse
They have several different versions but yes, you can get one that the phone just docks into and charges. No need to unplug the phone, just pull it out of the charger.
Jsunn said:
They have several different versions but yes, you can get one that the phone just docks into and charges. No need to unplug the phone, just pull it out of the charger.
Click to expand...
Click to collapse
Thank you. I will have to look into this if I decide to go case less. QI in car is just too slow for me.
I don't like the ones with the built-in charger. I like to have the option to unplug. Every phone I've ever owned has given off crazy feedback noise when the power cable and headphone cable are both plugged in but no audio playing.
Any news on this? I bought for my moto x 2nd gen. By the time i received, i had my nexus 6 lol
A general email from Proclip I received a few days ago announced plans to make a Nexus 6 holder. They offered email notifications when it's ready for release.
bmwh0r3 said:
Any news on this? I bought for my moto x 2nd gen. By the time i received, i had my nexus 6 lol
Click to expand...
Click to collapse
I bought a universal ProClip just for this, when switching phones, no need to keep buying new cradles
I also have a universal clip and it works wonderfully with my N6.
I also have a universal that fits both my wife's M8 and my N6 with case. Probably won't buy a custom again but will continue to buy custom mounts
can any of you link to the specific universal that fits the nexus 6. want to make sure I make the right purchase, thanks
warrenis1234 said:
can any of you link to the specific universal that fits the nexus 6. want to make sure I make the right purchase, thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6/accessories/proclip-universal-car-mount-t2948846
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
demarcmj said:
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
Click to expand...
Click to collapse
If it is a snug fit on the width, it should hold the phone from rocking back and forth, so the depth wouldnt matter too much. I'm not saying squeeze the width of the cradle into a death grip, but a snug fit should hold the phone okay.
demarcmj said:
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
Click to expand...
Click to collapse
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
dbpaddler said:
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
Click to expand...
Click to collapse
I can attest to dbpaddler's knowledge of ProClip and his status as a great reseller. I've bought many ProClip custom car mounts and phone holders from him over the years.
Yeah, the T1 holder depth is larger than the phone so if you grab the phone you can sort of tilt it forward or backward. It fits in there snug enough that it isn't flopping around while you drive.
I still want one designed for a naked N6.
dbpaddler said:
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
Click to expand...
Click to collapse
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
warrenis1234 said:
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
Click to expand...
Click to collapse
They have car specific mounts, Then Mounts for the phones. its kind of a two piece system. I am also waiting for the N6 mount so i can order one and a mount for my Chrysler 300s.
Jsunn said:
I just had a chat with ProClip USA, they said that they will be making a custom holder for the N6.
:good:
I have had proclip holders for my , N4, N5, & HTC M8.
They are pretty good if you haven't heard of them before.
-J
Click to expand...
Click to collapse
They'll have custom holders for every phone, always. It's just time. If you're using a case on the phone then just get an adjustable, and it will most likely be the last cradle you ever buy. I've had the same 875214 cradle since my Samsung Moment. And it has fit every phone since: Samsung Epic, Galaxy S2-4, Note 2, Note 4, Evo 4g LTE and my Avant. The design has change from adjusting in the four corners to the two in the center which started with their smaller adjutable for the iphone with skins and the BB Pearl.
The reason they're able to make cradles and mounts for just about everything with wheels and everything with a battery is because they machine everything. No high cost molds required. Machining has higher costs overall and doesn't really decrease with volume, hence their stuff comes at a premium (which I try to help with when I can). That's why when I was trying to get holsters designed back in the day, all the usual suspects just laughed at me, including Seidio. No volume, not worth our time. People on a grand scale don't want to put their big smartphones in a belt clip holster. ProClip took a look, started sending me prototypes to test, and for a few years had an exclusive in holsters. Then Seidio realized they were missing the boat, and they hopped on as did the other injection molders, and ProClip's business there dried up since they can't make $5 holsters. Their parent company is Brodit out of Sweden. Everything is designed and manufactured there. I sent a few phones and mp3 players to them for testing over the years. They even made a holder for my Rio Karma (dating myself).
Once in a while they'll have a big sale like they did for Christmas at 25% off. That's a rarity. Legally I can say I can offer you a 10% discount. That's the max they allow resellers to advertise. Key word being advertise. I sell through ebay at 10% off and just pray people email me first so I can save them a little more. Not a lot unfortunately, but it can only be so much otherwise it's not worth my time.
That said, there's no better combined mount and cradle system out there. The only problem is they rely on cracks and crevices in the dash to place the mount. Makes inserting and removal easy, great for leasing. But it also limits locations and sometimes dashes are designed as such that the only placement partially covers a vent or is a console mount that sits really low. Companies such as bracketron and pro-fit make the metal dash mounts that attach to the radio mount screw with pretty good placement usually, but it requires removal of the center dash panel. Not all want to tackle that. You start breaking clips, and it's a bear. Though some stereo installers will do it for a nominal fee. They can also tap in to the fuse box and run a 12v socket behind the dash if you want to clean up the wiring a bit and don't want to do it yourself. Companies like Kuda work similarly for mounting buy they have a leather covered box of sorts that clips in with metal bending clips and you screw in the cradle wherever you want. Pro-fit (I think) also makes adhesive type mounts that can be convenient for locations where others can't go, but don't live in Arizona and such as the heat will take its toll on the adhesive sooner than you'd like. The adhesive doesn't mar the dash though upon removal which is nice. Or you can go with the cheap vent mounts, the bean bag sit on the dash or better yet, the cd slot mount. I like my car too much to do that.
Sorry for the run on. I used to be more active promoting and helping when new phones were out, but it does get time consuming, and the real job is a little more important, so I've dropped off a bit.
---------- Post added at 06:39 PM ---------- Previous post was at 06:30 PM ----------
warrenis1234 said:
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
Click to expand...
Click to collapse
2-piece system. The cradle for your phone and the dash mount for your car. The dash mounts are vehicle specific and make use of cracks, seams and crevice they can fit in a slender barbed piece that kind of locks in. Some dashes are more flexible for placement than other. If someone is using it around the vents it usually means that's the only place they had an accessible area to place the dash mount. If you go to this link you can use the drop downs to find your vehicle and see what the mounting options are. It's not universal where you can just go from car to car with the cradle. Well, unless you go with their suction cup mount which works on the windshield. But, if you do have multiple vehicles you can buy one dash mount for each car and a move kit. female piece on each dash mount and the male piece on the back of the cradle. Then you can move the cradle from car to car.
The only thing getting screwed in is the cradle to the dash mount as most people just have one primary vehicle. If you're seeing something universal, it's the adjustable cradle. They do have console mounts that are adjustable and can fit in multiple vehicles, but they are more made for one car installation and just adjust to fit.

Categories

Resources