Related
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Me to.
I've been using Brodit mounts for the last couple of years but I keep swaping cars (between my own and a company one) recently.
This is the most promising one I've found so far.
http://www.arkon.com/pdamount.php
I like the look of this one because when I get a better case (flip type) there should be room to mount with it left in side.
Nice
Good range. Arkon only do a 'sucker' windshield mount for the jam/k-jam though.
Still looking.
Is there a UK site with them?
Any ideas when K-Jam accessories will appear? I want some screen protectors and don't like cutting bigger ones down to size.
Boxwave do some screen protectors and do ship to the UK.
http://www.boxwave.com/products/easyfinder/buy-best-i-mate-k-jam-accessories_734.htm
The Arkon kit CM910 has a vent, sticky Dash and suction cup mount included.
http://www.globalpositioningsystems.co.uk/arkon-universal-pda-mount-description.html
I think expansys do some Arkon Kit.
You might also want to look at
http://www.handnav.co.uk/product_details.php?id=126
http://www.globalpositioningsystems.co.uk/the-clip-company-vent-mount-description.html
Edit : I forgot to mention that Halfords do a expanding Phone Vent mount I think it's about £15.
Brodit is introducing a passive mount early this month (presumably 1st half).
Although I have not found any retailer selling it at the moment.
Cool I''ve been holding out for that one But I might get a cheap suction holder for the other cars I use.
I just bought a cheap HR Richter mini holder while I await a Brodit active holder.
Doesn't make sence for me to buy a passive holder now and an active holder in a while.
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
eayuwna said:
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Click to expand...
Click to collapse
Halfords has a universal holder for £14.99 that held my Vario very securely when I tried it in the shop and did not obscure the speakers or the USB port. It came with a window sucker and a sticky pad option. I'm not sure if there were clip or magnetic options as well.
Tesco have a universal holder for £4.97 that clips to the air vents. It was in a bubble pack and I could not tell whether it would open wide enough. But I don't suppose Tesco would object to a refund if it didn't, since there is no way to try before you buy.
Further to my post above I just bought a universal holder from a Vodafone shop for £5.00. It has air vent and sticky pad options and a slick/smooth adjustment operation - better than other units I tried for £10+. There is a gap at the bottom for headphones and USB charging if needed.
I don't like the idea of blowing hot air all over the back of the phone for hours in the middle of winter so I've plumped for the sticky option. I have yet to test it on the move with the Vario attached. I'll leave it overnight for the adhesive to stay stuck and then see how it goes.
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
q-biq said:
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
Click to expand...
Click to collapse
I've got one on my wizard and it looks great. I messed the first one up and i stuck the wrong side down on the screen and it gave an oil kind of effect on the screen, i'm sure the peel off sticker was on the wrong side, anyway i binned that and used one of the others i got and now it looks and fits great. had it on a few weeks now and its not scratched yet.
my last boxwave screen protector lasted over a year.
Hi all,
I have Brodit mounts available for the Mini (Wizard, Mini s) inc either a gooseneck mount or a brodit car specific pro clip.
Please feel free to visit www.dsldevelopments.co.uk for further details
Thanks, please PM me or email me if you have any questions or need any images,
Thanks
Dave
I've got this one and its fine!
http://cgi.ebay.co.uk/W-W-NEW-UNIVE...840540172QQcategoryZ10364QQrdZ1QQcmdZViewItem
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
This is the ONE! I jst got off the phone with www.proclipsusa.com, she is calling brodit to find out if it's in the shipment that's on it's way. I'll wait.
KJAM active mount
slewis1972 said:
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
Click to expand...
Click to collapse
No, the "base" only sticks out 3 or 4mm
Is it worth buying something which is designed specifically for the Hermes or does a cheap generic one do just as good a job?
I'm willing to spend a bit extra is the holder is better quality.
If anyone has a decent holder could you let me know the brand/where you got it from.
In my experience, The Brodit holders are superior. They have excellent fit, and some come with built-in charging (active holders) for additional convenience.
yes, anything by Brodit - expensive but worth it.
I am not very much convinced with their website's photos.
I have ordered dwo desktop cradles from expansys: HTC-branded, and from ORA, plus a car holder by Carcomm. I will review and post photos when they (finally) arrive.
Another vote for Brodit. See my pics in this thread:
http://forum.xda-developers.com/showthread.php?t=280439
I can recommend a unit by Carcomm, available at Handnav.
http://www.handnav.co.uk/product_details.php?id=2292
I've been using it for 3 weeks, very pleased with. You can get power cables for various GPS receivers too.
HTH
Mike
i am using a cheap car holder from Hama. it's doing its job and i paid only 20euro for it
My vote goes to the Brodit holder. Use it for several months now and charge my tytn without problems. Also i have one for my dell axim pda.
Brodit holders are a perfect fit.
i just use a generic pda holder bought form ebay, i think the ebay store was t-dimension.
it cost me $5 AU + postage. It is an anti-vibrate model.
This holder together with a TYTN car charger ($20 AU) is a practical and cheap (money wise) solution.
There is ONLY one place to buy from and it is...
www.proclipusa.com
I have no affiliation with them but I have bought holders for 2 different vehicles from them. The quality is very high. And they have basically taken every single vehicle out there and figured out how to mount your ohone as if it were a factory option. The location of the brackets is different for all vehicles and the fit on the phone and on the car is perfect.
I hope you enjoy, just as I have.
Using the Brodit cradle here, fantastic bit of kit which works perfectly. Recently used it on a 2500KM car journey and it was perfect the whole way!
Does anybody know which holder is compatible with the extended batteries?
I got this one at radio shack for 16.00
http://www.radioshack.com/product/index.jsp?productId=2103140&cp
add to it a retractable miniusb cigarette charger (for the RAZR) at wal-mart for $10.00
That looks right along the lines of what I want - I don't think it would hold the LION Battery pack with the Hermes though :/
Hi,
Here it is from Clove!
http://www.clove.co.uk/viewProduct....&product=1D0A78F8-C643-40C0-A006-1157B4C8200C
£45.83 inc VAT
A bit expensive considering their active car holders are usually £33-ish.
Will defo get one when it is available in more places!
If anyone has got one already, please post a review
Thanks.
i have a Brodit passive holder....
just a quick comment on it..
I have had a brodit holder for every PDA i have had for the last X amount of years and have never been unhappy in the least bit...
When i picked up the holder for the TC from the local shop here in Sweden, I looked at it and said "boy that looks tiny".... i thought maybe my head was playing tricks on me...
i took it out of the package at the counter and tried to shove my phone in it.... I would have needed a crow bar, and elephant and some butter to get it in there....
luckily the shop that i bought it from also doubles as a car stereo installation/ car mod shop.....
one of the guys from the shop was there and whisked me into the back and got out his heat gun and heated it up and together we made it fit to a T.
now it is perfect and i love it....
(i wonder, did brodit try to make this only with dimension from HTC, or had they an actual unit during their manufacturing process???)
anyway now i am once again a satisfied Brodit customer....
Proclip
I just got my holder yesterday. While tyhese are a little more than all the others I have seen it looks to be about the best holder I hqave ever had. I had one of the cheap ones off ebay and it broke already. This one seems to be very well made. They offer a few different models for the TC. With or without tilt or charger. I got one with the tilt and I like it. For what these phones cost it is worth it to get a quality holder for the car.
This my carholder-active, orginal for P3300
I got the Brodit as well as I've used them before and they are really well made....that is, except for this one which is as tight as you like. The o2 orbit2 does not fit it properly and I'm now having to debate sending it back vs. finding someone with a heat gun !!!!
In fact, I returned it and have just received another one....problem is that this one is even tighter. Will now have to find someone with a heat gun !!!!
Mine is a tight fit too but far better than the one I had for my last pda. If it isn't tight it buggers up the mini usb connection. The fitting kit for the car works fine too but it would have been better if the curley cable was shorter and the straight bit from the mount was longer just to make it easier to route the cable.
If you're looking for a car holder for the touch cruise, go to best buy in the auto dept., look for one made for the iphone and ipod both. It is around $12 and clips onto your air vent. The cruise fits in it perfectly.
Has anybody seen a car holder for the HTC Touch HD? Not the univeral ones which fit for a lot of different devices. I mean holders like the ones from Richter or Brodit.
I couldn't find any touch hd specific ... looks like these vendors are slow with expending their product portfolio!
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
so youbuy the holder bit (as you have linked), whats the other part youhave to buy (apart from the phone )
Brodit car holders are here
Hi there,
The holders for our Touch HD's have arrived at the Brodit-site:
http://www.brodit.com/?main=searchb...owModell=D0B8AFF1-0D4C-403F-AF24-7CBF0151CE61
I don't know about other countries/suppliers, but in the neterlands, www.pdaplus.nl says the will have them in 1-2 weeks...
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Can you also use this holder in landscape mode?
Philosoma said:
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Click to expand...
Click to collapse
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
They also offer a 3-in-1, with:
- Mini USB for charging
- 3,5 mm audion for sound out
- HTC Ext USB for original headset
Surely, if it only attaches to ExtUSB the 3.5mm and the ExtUSB for headset won't work? Connecting a HTC Headset from Polaris certainly fails on HD ExtUSB...
rickgillyon said:
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
Click to expand...
Click to collapse
Found them this morning, but 60 quid for the molex one? Bloody hell.. Getting the lighter socket one and will rewire it myself I think.
Hi,
Brodit relesed their holder series for Touch HD.
www.brodit.se
They are great and I use them for a while now.
Can be used in landscape
nf0 said:
Can you also use this holder in landscape mode?
Click to expand...
Click to collapse
If you buy the "tilt swivel" version; you can.
The opening to slide it in will remain on the short side, so if you tilt the holder 90 degrees the phone is held by the upper and lower side and the left OR right side (with the usb-plug).
I have had several holders from brodit for my HTC phones and the phone is always held so tight (without scratching!) that you won't have to worry that the phone will slide out sideways when in landscape-position.
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
I've used a Brodit Proclip on my last three cars, brilliant fit every time, latest is over the vent. Recommended.
galaxys said:
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
Click to expand...
Click to collapse
Yes, I normaly use proclip over the vent so that I'll have the phone near to me and in clear view.
Brodit has amazing produts made of very good and solid plastic. Not like some low cost holders that you might find.
But I think it all depends on the car you have. Brodit normaly has several sugestions to place the proclip, so I think they have it for everyone taste.
Jbs_Israel said:
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
Click to expand...
Click to collapse
I've upgraded from a HTC Trinity (which came with Herbert Richter car mount) and this works very well with the Touch HD - it's a slightly tighter fit, but very stable and allows the car charger to fit easily. Thought some people may find this useful at least as a stopgap until the proper Touch HD one is available
Hi,
What about a good holder that attaches to your windscreen? The Brodit ones are all very well but what happens if you are using a different car? Say if you go abroad and get a hire car, will the brodit holder be able to transfer?
the previously mentioned: Herbert Richter car mount uses a sucker. i am trying to decide between that and the brodit. Herbert Richter car mount isnt out yet for the HD.
Do either of them allow you to use it in landscape as well?
You can buy a sucker for the Brodit too if you prefer (or additionally):
http://www.dsldevelopments.com/brodit/suctionDSL.asp
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
kerni said:
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
Click to expand...
Click to collapse
...until you want to use another car I suppose.
With my n560 I have been using a Brodit activ holder in combination with a Herbert Richter Mounting device for the window. Therefore you only have to buy an adapter-plate for approximately 5€.
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
dazultra2000 said:
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
Click to expand...
Click to collapse
just a quick question. Ive never owned one of these fo rhte car. How does it attach to your car? Adhesive? Screws?
mallman said:
just a quick question. Ive never owned one of these fo rhte car. How does it attach to your car? Adhesive? Screws?
Click to expand...
Click to collapse
Depends, you can just screw it into your car, but I use the Brodit Proclip which is different for every car. Mine hooks around the side of the radio and into another groove and is very solid, then the holders screw into the proclip.
Proclips are probably the best way forward, no holes in your car
I have a dashmount kit from www.dashmount.co.uk as the proclip from brodit doesn't seem to fit my car correctly.
dazultra2000 said:
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
Click to expand...
Click to collapse
I have the passive brodit holder for the TYTN II, but TP2 doesn't fit without scrating it.
seems to fit in my origional htc trinity carrier perfectly, only problem is i cant charge it lol so ill have to get a new one eventually
thank you for the tip!!
I have a Brodit Active holder for my old P3600 (Trinity) and it fits real nice...
After some modifications (I cut off the USB part, and super glued it back on at the correct place to fit my TP2) I now have a Brodit Active holder that I can use again!
No scratches what so ever!!
(saves me about €50 )
^Good Tips...Brodit has always been my favorate car holder for all my devices!
do you know when the TP2 model will be released?
thanks
asked brodit and they say later next week...
Brodit holders now available. Just got to wait for them to filter to your resellers now.
Active: http://www.brodit.com/productinformation.jsp?anr=512021&sortiment=null
Passive: http://www.brodit.com/productinformation.jsp?anr=511021&sortiment=null
As I have already said, looks more or less identical to the Kaiser mount with a central support.
A word of warning to people buying, I had 2 active Brodit mounts that killed 2 different Kaisers because the charger unit was dodgy.
In the end I got another replacement from Brodit but I was too cautious of them by then, so I hacked an official HTC car charger into it.
I am personally gonna get the passive holder and use my HTC charger as I'm not going to take the risk again.
The htc supplied trinity/m700 one fits a dream but needs the bottom cutting out a little as the plug socket is in a different location. Damn good sturdy mount as well.
not sure I'll be getting any until it is confirmed that the pins are aligned and the phone does charge when using GPS.
I had issues with the Brodit one for the Kaiser and when it never worked they blamed HTC
Just ordered my passive with tilt swivel now!
Hope it arrives soon!!
Deiota said:
Just ordered my passive with tilt swivel now!
Hope it arrives soon!!...
Click to expand...
Click to collapse
Where did you end up ordering from, all I can find are 'pre order' listings ?
Thanks
Messa
elab said:
Where did you end up ordering from, all I can find are 'pre order' listings ?
Thanks
Messa
Click to expand...
Click to collapse
DSL Developments have 6 passive mounts in stock according to the website.
Gordon
GordonTGopher said:
DSL Developments have 6 passive mounts in stock according to the website.
Gordon
Click to expand...
Click to collapse
Hi, yes I saw those I am leaning more towards the active one though.
Thanks anyway.
Messa
I ordered a passive mount this morning and a new proclip to see if they ship the right one this time!
I'd try and heed my advice about the active mounts. At least wait until some other poor guinea pig has tried one!
I asked HTC This:
Is there an option for the HTC Touch Pro2 with the HTC 3-in-1 connector bundle?
Or is this compatible:
Set A
- 513021 Active Holder, Tilt Swivel
- 945011 Adapter Cable
Set B
- 512021 Active Holder, Tilt Swivel
- 945011 Adapter Cable
In terms of connecting my HTC touch Pro2 to a charging unit (built in the car) and also using the AUX out of the device via the mini-USB.
I want to know if the 3-in-1 cable/connector is able to be “plugged” in into 513021 of 512021
They answered me this:
It will also come a 3-in-1 holder for this device. The item no will be:
519021 short cable
520021 long cable
I hope those will be ready within 2-3 weeks.
One thing that you need to keep in mind with the 3-in-1 cables in that if you plug it in, the external speaker gets disabled. therefore if you're planning on using the mount for satnav, you'll need to hook it up to an aux-in on your car speakers in order to get any sound!