Related
Hello,
I believe I got pre-release model of Hero ... it starts up with G1 screen then I got HTC Confidential watermark which always stays there no matter what screen I am on.
Any way to remove this ?
You'll need to upgrade the ROM to a retail release version, when one becomes available and someone figures out just how to upgrade the ROM on the Hero. You may need to wait a few days/weeks.
so there is absolutely no way to remove watermark by using sdk development kit maybe ?
I managed to connect to my phone using adp tool and I could get status of the phone etc but I do not know what to do from there
iammorris said:
You'll need to upgrade the ROM to a retail release version, when one becomes available and someone figures out just how to upgrade the ROM on the Hero. You may need to wait a few days/weeks.
Click to expand...
Click to collapse
up
i'm looking for a response too
You can flash a new ROM. This is an old thread and when the answer was originally given there were no custome ROMS - now there are plenty out there - just look in the Hero Developers forum.
Hey guys, Im completely new to rooting and im getting a rezound in a couple days and i just had a few simple questions that i couldnt find the answers too else where.
1. If I root my rezound will i still be able to receive all the regular updates like the verizon updates and upcoming OS updates? If not what can i do to get those?(Correct me if im wrong but I would assume that i would have to reverse my root somehow if the answer was no but im not sure how to do that)
2. If i root do i have to install a ROM?(Note:Im planning to remove htc sense as soon as i root and install a new launcher...idk if that has anything to do with having to install a ROM but i figured i should ask)
if you plan to stay on the original rom after you root, im pretty sure that you will be able to recieve the actual ota when its released. but you say that you plan to delete a lot of htc stuff (im assuming bloatware and things like that)...i would HIGHLY recommend just flashing a rom with all of that done for you. unless you know what youre doing, removing htc stuff by yourself can be detrimental to your phone and cause it to not work as it should. im currently running cleanrom 4.1 and its incredible. flashing a rom would be the best way to go
hope this helped.
yes that help, thanks. so if i were to use cleanrom 4.1 and i wanted to get the official ICS update when it released, what would have to do to be able to install it?
Forgive me for being a noob but I am going to attempt my first post I usually just read but feel I may be able to give a quality answer. SO, If you make a nandroid backup before flashing any rom's you will be able to revert back to stock at any time. You can do this via a custom recovery. In order to get an OTA, like the ICS one that is coming soon, you will have to reload your stock rom. Simply put, you cannot get an OTA with a custom rom. If you want a custom rom now and an OTA update later, make a backup and revert back to it when the OTA you want is released. Hope this helps!
One thing that nobody seems to ever mention is do NOT do anything to your phone for the first 30 days because you want to make sure you have a solid phone.
If your phone is constantly malfunctioning because of a problem with the phone, but you have already rooted your phone and flashed a new ROM, then you're going to be nothing but frustrated because you will think it's the ROM, or perhaps something you did when rooting the phone.
If you have a problem within the first 30 days and you have not rooted or flashed a new ROM all you do is walk in to Verizon, tell them the phone is brand new, but having issues with [insert problem here] and you get a brand new phone with all your info transfered for free, and another 30 days to make sure your replacement is not defective as well.
Sent from the resounding Rezound
very good tips! thanks guys, your answers are highly appreciated!
Aaronmc
What device are you coming from? I went from an OG Droid1 to the Rezound and actually love Sense. I think you should try it out first before cutting it out completely. If you wish you can leave the stock Status Bar/SystemUI and install a different launcher as that will disable most of the Sense elements, ~90% of it. As far as OTA's go, unconfirmed whether or not you can update from the recent leak. Make sure you have stock rom available or do not flash the recent leak and choose one of the older roms (Can always RUU back to the stock rom when official hits). I suggest Rezrom 3.1 with the old firmware patch as for me it's been so far the most stable and best battery life ICS rom I have used.
1. No, you won't be able to get OTA updates. But don't worry too much about that. It takes about a week, but the devs will post a manual method or you can use the RUU that usually preceeds the OTA by a day or two.
2. Don't try to disable sense from the stock ROM. It'll be trouble, I tried it for a while back when we only had temp root and it made it buggy and smoked the battery. Flash some ROMs and let the pros get that stuff worked out for you (and throw your favorite dev a few bucks to keep him interested!)
The real consequence of rooting though is the countless late nights flashing yet another new build or theme or whatever. It's kind of addicting.
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good:
Hi,
Ive had my Galaxy S3 for about 4 months now, and being in Australia waiting for the Jelly Bean update is driving me crazy, So i wanted to know how hard it would be to root my S3, I would have done it as soon as i got the phone however, My first galaxy stopped working after putting a new rom on the phone and my galaxy s2's screen turned blue and then died, although this could have been because i dropped it the day before, not sure both of these have kind of put me off rooting, however ive had a xoom and optimus 3d that are still fine on custom roms.
Also, If i wanted to return to stock, and unroot the phone, would that restore my warranty?
I have the International Galaxy S3, I think With Optus in Australia,
I would have searched how to root by myself, but i really dont want to brick the phone.
So if someone could link me to a stable rom and some instructions on how to root it would be fantastic
Thanks for reading
4 months..... I couldn't even wait for a day after received my S3
Even with custom ICS ROM you ll see huge difference
Hehhe I don't really care about warranty anymore after I chose to root
As long I enjoy the phone... But there's a way to do that...
I can't help you to find the link for rooting and apply CWM since I haven't been to any threads
If I were you, go search root by CF....
Good luck
Rhys.. said:
Hi,
Ive had my Galaxy S3 for about 4 months now, and being in Australia waiting for the Jelly Bean update is driving me crazy, So i wanted to know how hard it would be to root my S3, I would have done it as soon as i got the phone however, My first galaxy stopped working after putting a new rom on the phone and my galaxy s2's screen turned blue and then died, although this could have been because i dropped it the day before, not sure both of these have kind of put me off rooting, however ive had a xoom and optimus 3d that are still fine on custom roms.
Also, If i wanted to return to stock, and unroot the phone, would that restore my warranty?
I have the International Galaxy S3, I think With Optus in Australia,
I would have searched how to root by myself, but i really dont want to brick the phone.
So if someone could link me to a stable rom and some instructions on how to root it would be fantastic
Thanks for reading
Click to expand...
Click to collapse
androb0t said:
4 months..... I couldn't even wait for a day after received my S3
Even with custom ICS ROM you ll see huge difference
Hehhe I don't really care about warranty anymore after I chose to root
As long I enjoy the phone... But there's a way to do that...
I can't help you to find the link for rooting and apply CWM since I haven't been to any threads
If I were you, go search root by CF....
Good luck
Click to expand...
Click to collapse
Hi, Thanks for the reply,
I am going to follow this guide, Its from another website so my apologies if i am not allowed to post links to external sites, Although i found the link on an XDA thread so i figured it would be okay
http://www.androidrootz.com/2012/09/how-to-root-any-samsung-galaxy-s3.html
And im just looking at ROM's now, Just out of curiosity which ROM are you using androbot?
Thanks
I would always root my phone Just because you can use AD Block
Haha yeah i will look forward to that , Just Root'd phone then Tested with Titanium backup and works fine Just wondering if any of you could recommend a good ROM, or the ROM your currently using that your really happy with? Thanks
I'm using crDroid 6.3 at the moment...
I like ROM doesn't get stripped but still performs fast and fluid too...
Each user has their own taste....
The ROM is around 9xx mb...
It's got AROMA installer too....
After you root and install CWM, crDroid ROM requires touch recovery to avoid any problem...so you need to flash touch recovery recommended ...
Rhys.. said:
Hi, Thanks for the reply,
I am going to follow this guide, Its from another website so my apologies if i am not allowed to post links to external sites, Although i found the link on an XDA thread so i figured it would be okay
http://www.androidrootz.com/2012/09/how-to-root-any-samsung-galaxy-s3.html
And im just looking at ROM's now, Just out of curiosity which ROM are you using androbot?
Thanks
Click to expand...
Click to collapse
I gave stock a try for a while.... Lasted 3 days. Samsung managed to create something that can't run on a quad core phone.... That's almost something to be proud of, I shouldn't experience lag and homescreen redraws on a $500+ phone. Installing a custom rom is a must for me, I don't understand why OEM version of Android are so horrible but they are. Rooting only will give you a few benefits and extra things you can tweak as well as ad blocking and making the GPS faster. But if you really want a change, custom roms are the way to go.
Hey guys new to android based phones, ive had the s3 for a few months and have read the forum for a while, i want to flash a custom rom and read about imei backup which i just did but i want to know is it common for the imei to delete when flashing?
I lasted about 3 weeks on stock.. now dual booting CM10 & UltraROM. You won't regret it :good:
Should I root??
Sorry for posting here but it's the closest I have found to what my question is. I have an AT&T S3. I would like to root to get rid of my bloatware but I'm a chicken. I rooted my HTC Inspire over a year ago and I didn't really know how to remove to AT&T apps and the stock rom was not as snappy as it was prior to rooting. I planned on staying on ICS until an official JB OTA was available, as I've never flashed custom roms before. What I'm most concerned about I guess is whether rooting will mess up my 4gLTE and wifi. I rely heavily on wifi since sadly, AT&T is lame, expensive, and doesn't offer unlimited data. So I want to make sure I don't screw up wifi if I do this. Can anyone provide insight or point me to a good resource that can help?? Thanks a bunch in advance and sorry for the noob questions.
justxan said:
Sorry for posting here but it's the closest I have found to what my question is. I have an AT&T S3. I would like to root to get rid of my bloatware but I'm a chicken. I rooted my HTC Inspire over a year ago and I didn't really know how to remove to AT&T apps and the stock rom was not as snappy as it was prior to rooting. I planned on staying on ICS until an official JB OTA was available, as I've never flashed custom roms before. What I'm most concerned about I guess is whether rooting will mess up my 4gLTE and wifi. I rely heavily on wifi since sadly, AT&T is lame, expensive, and doesn't offer unlimited data. So I want to make sure I don't screw up wifi if I do this. Can anyone provide insight or point me to a good resource that can help?? Thanks a bunch in advance and sorry for the noob questions.
Click to expand...
Click to collapse
Using Odin to flash CF-Root is super-easy, so don't be afraid. Rooting will not affect your phone's smoothness, but if you use it to remove apps with Titanium Backup without making sure they are not useless, you may end up having performance issues or worse. Of course, I'm not saying you shouldn't root, just that after rooting, take care with what you remove via TB.
CF-Root can be found in the Original Android Development forum, follow the instructions and you'll be ok.
All three mobile networks are releasing them this month, November! Telstra, Voda then Optus.
Hopefully it's XXDLJ4 or above or XXDLJ6 etc
Swyped on GT-I9300 - XXDLJ1 - Siyah kernel 1.7b1 - Thunderbolt tweaks - JKay theme -
So, I have been reasonably experienced in the Android world with terms to Nexus devices and Samsung but HTC still confounds me. I have an S-Off Rezound, it is on GB Firmware and everytime I flash a ROM I have to flash a fix for old firmware or else is random reboots. I have searched and searched on different occasions for the answer to this but I have yet to find a straight answer. Feel free to flame me, be rude, etc., but can someone please point me in the right direction. My Fiancee loves her Rez, has been running sense 4.1 since we got it (it was s-off when we got it, a happy surprise from the seller we bought it from on eBay.) But she is weary of the extra steps she needs to take to update a ROM. Can anyone point us in the right direction?
[/COLOR]
loveableterrorepic4g said:
So, I have been reasonably experienced in the Android world with terms to Nexus devices and Samsung but HTC still confounds me. I have an S-Off Rezound, it is on GB Firmware and everytime I flash a ROM I have to flash a fix for old firmware or else is random reboots. I have searched and searched on different occasions for the answer to this but I have yet to find a straight answer. Feel free to flame me, be rude, etc., but can someone please point me in the right direction. My Fiancee loves her Rez, has been running sense 4.1 since we got it (it was s-off when we got it, a happy surprise from the seller we bought it from on eBay.) But she is weary of the extra steps she needs to take to update a ROM. Can anyone point us in the right direction?
Click to expand...
Click to collapse
RUU http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
1st flash RUU(it will give you new firmware permanently)
2nd flash any rom with new firmware
Or ....
Download this
http://old.androidfilehost.com/main/-Support_Files-/SuperChilPil/[ICS][2.27][STOCK][8-12]PH98IMG.zip
but don't run it as a PH98IMG just yet, replace the hboot in it from this
http://old.androidfilehost.com/main/-Support_Files-/SuperChilPil/[ICS][2.25][STOCK][5-7]PH98IMG.zip
You will be soft-bricked until you flash a new rom/re-flash your current one.
Thanks guys, appreciate the info. She is going to run the RUU today and probably just go back to newts one xxx for global. She was getting tired fo forgetting to flash the "fix" everytime she updated.
You don't need to RUU if you're s-off, you can flash just the firmware, keep in mind you'll need to reverse the old firmware patch, that's available in the link below too..
http://forum.xda-developers.com/showthread.php?t=1614366
Global would be - [ICS][2.27][STOCK][8-12]PH98IMG.zip, follow the directions in the post to install it.
Back up your rom just to be safe but you should be ok just flashing the combo you want along with the "new" firmware patch.
EDIT - Just realized Snuzzo posted the same thing, it's linked from the XDA post above which has directions in it.